Trouble with 9400 chip...again??
Hi everybody,
I bought this Macbook Pro in November 2008. As soon as I got it I noticed the screen blinking every once in a while if I was using the 9400 Nvidia chip (the better battery life setting in the energy saver preferences). I encountered no such issue with the 9600 chip (high performance setting).
Eventually I sent it in and I had the logic board replaced (and the display was also replaced though I didn't ask them to, for "horizontal/vertical lines" though I never noticed any problems).
That was fine and I noticed no more blinking. But when the day I got it back I also discovered the sound port was jammed for some reason. I couldn't fit in a headphone jack and the first time I tried it immediately switched to external speakers, meaning I had no audio...
Finally I took it back and they put in a new logic board once again, this time they did it in store. They left one screw a bit out so that the bottom battery bay casing isn't flush with the rest of the chassis, but that isn't bothering me so much.
What is bothering me:
Now I get weird lines flash across the screen, or sometimes, what looks like a ghosting image for a few milliseconds. It is all very intermittent and brief but it happens often enough for me to definitely notice. It's the 9400 since I've been on that setting ever since. I will change to the 9600 and follow up with that.
So, I guess I'm taking it in for repairs again (I've got Apple care for a while longer, so they're still obliged to fix this mess). Has anybody else had this much trouble with these kinds of issues? Taking my computer in for repairs is a humongous hassle for me...I need it for work...
Message was edited by: Shira_E
Oh right, this is Report Builder 10.1.2.0.2.
Similar Messages
-
I am having trouble with my mac mini ethernet. It had been working for weeks after an update to SL 10.6.8.
Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
But yesterday, after a power up. my ethernet was not working again. I tried this old trick to repair it, but the interface choices
listed for '+' a new service did not include Ethernet any more. And the Utilities->System Profiler->Ethernet Cards shows
no ethernet available.
As a last ditch effort i reloaded my original SL from DVD. (I think it was version 10.6.4 but i could be mistaken on the version).
The ethernet worked! But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
Now the Ethernet is not working again. I see the same symptoms as before with the Ethernet seeming not installed.
Is this a problem seen by others?
Would going to Lion fix the problem?
Could AirPort actually be the culprit and not SL?
If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?Have you reset the SMC?
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again. -
Anyone having trouble with Netflix not showing up on the Internet Menu? I have tried to do a reset and then restore, but it says that "the latest update download cannot be done at this time, try again later"
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.
You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.
-
Hi friends, I'm having troubles with my Ipad 2. I was working with it and suddenly the screen distorted. Now it is not possible to get it back to work properly. In fact, the screen is now black and nothing I have done makes the Ipad works again. Please Help. Thanks in advance.
I think you should make an Genius Appointment.
Genius Appointment
http://www.apple.com/retail/geniusbar/ -
hii i have iphone 3g but i am facing a huge trouble with it.Once it's discharged it doesn't switch on again even if i connect it with electricity . what should i do?? please answer me.
Hello manal1994,
You may want to try resetting and, if necessary, restoring your iPhone.
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If the device remains unresponsive or does not turn on (or power on), try resetting
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
If there is no video, verify that the device has enough charge to turn on
If you are using an iPad, ensure that it's connected to the 10W USB Power Adapter.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Home button to attempt to wake the device.
If the screen displays a red battery icon, let the device to continue to charge until it turns on.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode.
All the best,
Allen -
Has there been any trouble with the charger? I am getting ready to re-order but the one i had.... the had the power surge and the end was blackened. Not sure if it safe to use the laptop again? Thanks.
Can you also see blackening in the power jack on the PowerBook? If so, I would be worried that the surge also damaged the computer/
Does the computer run OK on just the battery? If it is working on battery power, that limits the number of things inside the computer that could have been fried.
If the computer is severely damaged by the surge, it's not worth repairing. However, a couple of posters in Apple forums said their homeowners'/renters' insurance paid them replacement value of their computer after power surge damage due to known problems on the grid, like the huge power outage that hit the SW Untied Stats and part of Mexico yesterday. -
Does anyone have trouble with the iPad booting you off of the internet? I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.
Jon....
Don't confuse the threads here with 'typical' experience. Most of the stuff here is from brand new users, and those that have problems, and considering the 30 million pads in use, represent a very small sliver.
If you are having repeated crashes it is really pretty basic. You either have a physical problem with your pad, or you are using too much memory.
The iOS system is supposed to monitor memory, and shut down previously used apps automatically to free up memory for what you are doing now. That part of ios is not perfect, and if an app introduces an unexpected memory load, sometimes it gets over whelmed.
This happens, more often than not, when using safari with multiple windows open on graphic intense sites. It can also happen with a memory intensive game, and residual apps in the background.
Double tap the home key and take a peek at the recently used list, and shut them down completely, and often the problem goes away.
If the problem persists, you may have a software issue, and a trip to the genius bar may be in order. -
I have trouble with my computer accepting an audio CD that I want to download to ITunes. It will remain in the computer for 10 - 15 seconds before ejecting it and not allowing me to download. My ITunes is open. Why does this happen or what am I doing wrong? I have done this dozens of times before. What makes this different and does it have anything to do with recent upgrades?
I'm not sure? I'm new to lightroom and it's lightroom 5 that I'm using. What is happening is I go to develop the picture in the developing section in lightroom and it gives me this message that says " Develop module is disabled Please purchase a license to reactivate the develop module." I shouldnt have to do anything else after already buying the cd and downloading it initially. It's already paid for? I'm so confused!!
why is the adobe lightroom 5 asking me to keep downloading the CD I bought at Best Buy store. I have already bought the CD and downloaded it on my computer but for some reason it gives me 10 days a then I have to download it again!!! Why is this its so an -
I know that I am not the first one, but again troubles with the magic mouse
Perhaps somebody can help me?
I still have troubles connecting my magic mouse with a Mac Pro (Mac OS 10.6.4). The same mouse works fine with my Macbook (again with 10.6.4). I uninstalled all the additional mouse software that I previously installed (Logitech) and installed the magic mouse software, but it is always only recognized as an Apple wireless mouse, no matter what I do.
Any ideas what to do?The window could be opening off screen.
*See --> http://www.sevenforums.com/tutorials/75291-offscreen-window-move-back-desktop.html
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
I had trouble with a iTunes download. Two songs of an album were not complete. I contacted iTunes and they redownloaded the tunes. My iTunes now has the complete copies. The trouble is my iPhone will not accept/sync the complete copies. It will only play the original incomplete copies of these songs. I've made new playlists and made sure I had the correct items checked to backup/sync. Still only the incomplete copies are played via the iPhone. What's up? What can I do to get to the iPhone to sync the correct version?
- Are you saying that they are not listed in your Purchased section?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Are they listed in your Puchases history when you log into your account on your computer?
- Are they still available now for purchase? If not then you are out of luck
If they are still available and listed in your Puchase History then contact iTunes
http://www.apple.com/support/itunes/ -
Satellite L755-16J - Trouble with sound card
I currently own a Toshiba *Satellite L755-16J* and it is having some sort of trouble with the sound card, i think.
When i bought it, it came with windows 7, i changed the windows to windows 8 and since then the audio has been troubling me.
The internal speakers work for a minute or two when i play an audio file but then stop working.
i had been using an external usb soundcard and external speakers for some time but decided to switchback to windows 7 for the sound to work properly again. even though i have switched back to win 7, the sound still doesnt work.
I am quite sure that the problem is not in the internal speakers because they do work, although just for a brief moment but they work, so i am guessing the problem is in the software instead of the hardware.
i tried updating the sound drivers but they seem to be up to date, according to windows the drivers "seem to be working properly"
Can anyone help?> even though i have switched back to win 7, the sound still doesnt work.
How did you do that?
Did you use the Toshiba Recovery Disk in order to install Win 7 or did you install the Win 7 using fresh and clean Windows 7 disk?
The notebook supports Conexant sound chip. The sound driver is available on the Toshiba EU driver page and in case the sound chip is already recognized in device manager after the sound driver installation, I assume the driver has been installed properly.
In such case I would recommend you to connect the headphones.
In case the headphones would function properly, the speakers might be affected. I mean the hardware. But of course its only an idea.
Beside the headphone check, you could check also the settings within the control panel -> sound -> playback tab.
Usually the speakers should be set as default device.
Check this option too. -
Trouble with Toshiba built-in webcam: "unable to enumerate USB device"
I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature -
I am having trouble with app updates on my iOS 5 iPhone never getting beyond the "waiting" state. I have tried signing out/in of my account, rebooting and removing/re-installing the apps. This started shortly after going to iOS 5 but I am not certain if that is related. All updates that I try now are stuck in "waiting". I also tried removing the apps and then installing via iTunes desktop sync with no improvement. The only thing that I have not tried so far is a restore to a prior iPhone backup. I have not been able to find anything to indciate what the updates on waiting on. There is plenty of space on the iPhone (16gb available). Any suggestions on what to try next?
Hello there, Missy.
First thing I would recommend is to check your downloads queue to make sure there is not an interrupted download per the following Knowledge Base article:
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If your download was interrupted using your iPhone, iPad, or iPod touch
1. From the Home screen, tap the iTunes app.
2. For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
3. Enter your account name and password if prompted.
4. Tap the blue download arrow to resume.
If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
For Apps, you can also try tapping on the application icon to resume the download, as outline in this featured discussion:
App updates won't download on my...: Apple Support Communities
https://discussions.apple.com/thread/4111336
Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
If that doesn't do it, try resetting or restoring the iPhone.
via whatheck
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
WWith the new ios7, I became frustrated in using my iPad3..I'm using Skype as my main communications with my love ones back home,now it seems that ios7 doesn't help me a lot for I'm having trouble with my audio communication coz my family can't hear anything from me.. My skype doesn't have any options or settings that I can check with to see if I can fix it...I need help...please if any of u knows how to fix it..I would greatly appreciate it...
You can try removing app then reinstalling. If that doesn't work
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/
Maybe you are looking for
-
Is the original IPad still able to be updated?
-
Export to pdf not visible for some users
Hi, I exported a dashboard to pdf (Xcelsius 2008, SP2), and sent it to other users. On my labtop the pdf works fine, but some of the users get only a blank page. They are asked if they want to run the contents of the file (so flash is working in gene
-
How to do forward multiple mail
Hi all, I want to write the forward multiple mail script,if we select multiple mails from apple mail and click forward button ,messages will come in to the same window as forward . the same scenario i want to do using apple script.If any one have ide
-
How to edit a converted Word Document from a PDF file
how to edit a converted Word Document from a PDF file
-
Unable to execute command adprmkey in upgrading 11i to 12.1.1
Hello Team Leaders: I am in the process of upgrading EBS 11.5.10.2 to Release 12.1.1. I have imported the database, Layed down the apps and have started applying patches. While running adpatch I have encountered: java.lang.Exception: ERROR: Unable to