Trouble With a Wi-Fi Network

Here's my situation,
Y've got a password to access to a Wi-fi Network at my school, Then, When i put the password and Tap Rejoin, It start loading, But it never stoping... It give me only a Ip Address and the Subnet. So i don't have the Router and DNS Adress.
After few Seconds or Minutes, It disconnect and reconnect with the same things, but a another Ip adress. One of my friend has the full access to this network and have no trouble with it. But for me, it doesn't work.He ( My Friend ) in his settings he has the Router and DNS Adress when he connect his Ipod to the Network... But not me, So i don't understand what's happening, How can i get the correct Information to be connected like him?

I think i know the problem But i don't really know how to resolve it...
It seems like my Ipod Touch compared to my friend One's is giving
169.**.**.** IP instead of 192.**.*.** Etc... And 255.255.0.0 Subnet...
I have a Ipod Touch 4g on 5.0.1 and my friend has Ipod Touch 2g 4.2.1
What could i do so the Network would work on my Ipod ??

Similar Messages

Trouble with setting up the network connection

I am having trouble with setting up my network connection on my new laptop, we use a telecom xtra broadband connection for our windows computers in the house. But when i try to put what i think is the right information in the set up it comes up with "network connection could not be configured"

Hi,
you can not connected to sap on 127.0.0.1 ip address it is loopback address for local host.
instead of give the ip address where sap is running.
if you running SAP on your standalone PC/laptop then you need to assign one ip address to that host
use this ip address to connect.
regards,
kaushal

Trouble with HP printer and network

Just upgraded to SL on my MBA. I have a small office network with only a few computers and 2 HP printers. They're both old, one HP Color Laserjet 4600n and one HP Laserjet 4000TN. I've been printing to both of them for over 1 yr on MBA with Leopard (10.5). 10.6 does away with appletalk, so I install the first printer, HP4000, through IP protocol with HP Jetdirect Socket. I input the printer's IP address, SL finds it and installs perfectly, no problems. But the MBA now cannot see the HP 4600. I find the printer's IP (192.2.2.188) and input it into the add printer (IP protocol) boxes and it cannot find the printer. I tried using the terminal and "pinging" the printer at that IP address and it cannot find it. So my MBA is not communicating with the printer somehow. I know the cables work, I know other computers (PCs) can find and print to the HP 4600. I can't figure it out. Please help!

I am having the same problem. I first hooked up my old printer; an HP 7760 deskjet. It printed fine for a day or two. Then it just stopped and it would say "jobs stopped." I kept clicking on "start jobs," but it just wouldn't print. It would go back to "jobs stopped."
I reinstalled 3 times. On the third time it worked and I started printing again. After 5 or 6 print jobs, it stopped again.
I decided to hook up the HP that I bought when I bought the new iMAC G-5. The HP Deskjet 5740 began printing right away with no problems..... until the next morning. Back to the same "jobs stopped" problems! I can't seem to get any answers. Some have suggested that using the new OS X v10.4 Tiger is too new and I need to download new drivers. I tried that, but I wasn't able to get the new drivers installed.
Super frustrating!

IChat/Adium trouble with a college proxy network.

I'm at college on a wireless network, and there is a proxy in place to access the internet, but unfortunately, iChat and Adium no longer want to connect, even with the proxy details in place within each program.
Can anyone help me out?
Cheers, Karl.

You may want to look into installing authoxy on your mac to get around certain proxy problems.
http://www.hrsoftworks.net/Products.html

Trouble with MacBook Pro finding AirPort networks

I recently bought a new (refurbished) MacBook Pro (15", 1.83GHz), to replace my old iBook, which was one of the early white models, circa 2001.
Everything about my new computer is wonderful, of course, except that every time I boot up, wake from sleep, or turn on the AirPort, it takes up to a full minute for the AirPort to find any open networks. This happens at school (where there are AirPort base stations all over the place), at home (where we have a Belkin router, and several neighbors have others), and at my parents' house (where they have a linksys router). It doesn't seem to matter whether the networks use encryption or not, nor how close or far I am from the nearest router. If I know the name of a nearby open network and type it in, I can get it, usually. On my old iBook, I had a little trouble with some of the networks at school sometimes, but never with this kind of delay across the board, and certainly never at home nor at my parents'.
Also, at home, when the the AirPort finally does find the available networks, it NEVER chooses my router first, even though it's the only one in the neighborhood that I listed under "Preferred Networks."
I've read some similar posts, dealing with problems with accessing encrypted networks, but nothing seemed to address my particular issue. It might be a defect with the AirPort or firmware, but I wanted to check, first.
(Oh, and I'm not a complete newbie, but tech-speak often goes over my head. Please keep it simple.)
Thanks!

This is how I fixed the problem on my MBP.
Go to Macintosh HD > Library > Preferences
Delete the folder SystemConfiguration
Go to System Prefrences > Network > Show+Network Port Configuration. Check Airport and Built-in Ethernet and make sure Airport is on the top of the list.
Reconfigure your wep passwords and it should work. Worked for me. Also, you will have to redo your power settings.
Regards,
David Rodriguez

I am having trouble with my Mac Mini's ethernet connection. Defining a new network interface shows no ethernet adaptor. Reloading SL from DVD repaired. But SL update lost ethernet again. Will Lion Fix?

I am having trouble with my mac mini ethernet. It had been working for weeks after an update to SL 10.6.8.
Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
But yesterday, after a power up. my ethernet was not working again. I tried this old trick to repair it, but the interface choices
listed for '+' a new service did not include Ethernet any more. And the Utilities->System Profiler->Ethernet Cards shows
no ethernet available.
As a last ditch effort i reloaded my original SL from DVD. (I think it was version 10.6.4 but i could be mistaken on the version).
The ethernet worked! But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
Now the Ethernet is not working again. I see the same symptoms as before with the Ethernet seeming not installed.
Is this a problem seen by others?
Would going to Lion fix the problem?
Could AirPort actually be the culprit and not SL?
If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?

Have you reset the SMC?
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again.

I'm having trouble with back to my MAC. I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection. I'm wondering if the Verizon hookup is a problem.

I'm having trouble with back to my MAC. I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection. I'm wondering if the Verizon hookup is a problem.

I finally figured it out. Needed to update her Airport firmware and allow guest access, and also changed Sharing preferences to Allow Access for All Users.

Networking troubles with ABIT BP6 board and Solaris 8

Hi, Im trying to install the Solaris 8 software on my ABIT BP6 board with a Compaq NetFlex3 10TX NIC. This is a SMP board (dual celeron) but is not on the HCL (the NIC is).
The installation gives no problems at all (except for a memory conflict between memory devices), and SunOS works pretty well except for networking... using ifconfig -a shows me the networking interface and the loopback interface but I can't ping outside of the Solaris machine (or ping to the Solaris machine from an other machine).
I know that the board is not on the HCL but I had no networking troubles with Solaris 8 early access.
After instalation of the software and the reboot, I get the status as below:
>
configuring IPv4 interfaces: cnft0.
Hostname: MILLIWAYS
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c0d0s7: is clean.
All devices are configured...
Configuring network interface addresses: cnft0.
RPC: Timed out
Starting IPv4 routing deamon.
starting rpc services: rpcbind done.
Setting netmask of cnft0 to 255.255.255.0
<
As you can see I get a time out while configuring the NIC. I tried a lot of different things (and some bad ones like using the device driver disk of the EA version with the cd's of the final version but no luck there...)
Anyone with the same problems or any help?
Thanx, Marcel

Hi maeck,
I'm sorry that my message is off the topic. Could you help me with a problem that I have with Abit BP6 + Solaris 8 combo?
I'm encountering error message on console screen during booting/reboot/shutting down like "APIC error interrupt on CPU 0. Status=2" where CPU can be 0 or 1, status can be 0, 2, 4 or 6.
If I let my dual Celeron400 run at 400MHz, the frequency of errors is few and far between. Though it still happens. If I overclock them to 558MHz like I udually do, it will show at least 4 times during a booting process. I've tried MPS 1.1 and 1.4 settings. I've also tried turning off all cache, delayed transaction, passive release settings.
In addition, the overclocked system tends to lock up while it runs flawless in Windows 2000 Professional and Redhat 6.1. Do you have any similar experience?
My system config:
Abit BP6 motherboard
400 MHz CPU X 2
GlobalWin FEP32 X 2
128M SDRAM
Creative Labs 3DBlaster TNT2
13GB Maxtor DiamondPlus 6800
Acer 10x DVD drive

I'm having trouble with my Ipad. It cant find any networks around it. What do i do?, I'm having trouble with my Ipad. It cant find any networks around it. What do i do?

I'm having trouble with my Ipad. It cant find any networks around it. What do i do?, I'm having trouble with my Ipad. It cant find any networks around it. What do i do?

Start here: iPad: Troubleshooting Wi-Fi networks and connections.

IPad2 got a terrible trouble with 3G network after updateing to IOS5.1.1

Hello guys, I got a terrible trouble with 3G network after updateing to IOS 5.1.1. Now when I turn on my cellular data, the iPad 2 can say the carrier and 3G on the left top. But when I tap the Safari, it turns to be:"PDP authentication failure". I did the update to 5.1.1 last night, before that every thing is fine, and now I can't use my 3G at all.
Could anyone please tell me what's happing and what should I do???
Thank you so much!

Hi Miky. After upgrading to ios 5.1 I had the same problem.
I reset the APN on network settings and rewriting the same. iPad now working on 3G.
My operator is 3 ITA
iPad 1 64 GB Wi-Fi + 3G

I am have trouble with 2 new 21.5" iMacs losing wifi connection from my network. I have 4 other vintage iMacs that never lose connection. Please help.

I am have trouble with 2 new 21.5" iMacs losing wifi connection from my network. I have 4 other vintage iMacs that never lose connection. Please help.

This subject has been talked/written about a lot, after Lion was introduced. A solution from Apple has not yet been published, everybody is waiting.
Try for instance https://discussions.apple.com/thread/3734081?start=15&tstart=0, but there are more discussion groups with the same subject: frequently lost WiFi-connections in newer Macs running Lion or up.

I have installed the new i OS 7 on my IPAD, I am having trouble with sending messages. I reset the imessage and networking as I did for the iphone but it still does not allow messages to be deleivered. any suggestions?

I have installed the new iOS 7 on my I Pad and am having trouble with messaging, I reset the imessages and networking and the messages are still not being deleivered.

Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

Trouble with a Dell Printer on a network with PCs.

I've searched the forum and found only trouble with people getting their files to print on a mac, but I can print, only it's terrible quality while the PCs are printing out high-quality. It's a Dell 5100cn, and I've installed the updated driver from the Dell website, and called them for help, but they said they couldn't help with a Mac problem. I'm connected through an IP address over a wireless connection.
Has anyone help?
Mac OS X (10.4.5)

It was a simple problem after all. Sadly my hard disc was about to snuff it. I changed disk, reinsalled Tiger and all is as smooth as ever.

Trouble with wifi and swtiching to 4g networks

I having problems with iphone 5 and network issues. While on wi-fi is constantly turning on adn off adn it is frustating.. when not in wi-fi.. it basically does not do nothing.... I dont get to see the 4G

The dns (domain name server) address is found by choosing settings -> wifi -> your network.
Then tap on the blue circle with the arrow on the right side.
Scroll down until you find router and dns.
If the dns is blank or showing the same as your router address, this could be causing the problem.
What you could do is contact your isp and ask them what there dns address should be, then enter that into the iphone and see if it works.
Hope this helps.

Trouble with 10. Network.

I set up my AirPort Extreme with a 10. Network. Why does my iPhone and iPads sometimes look for the network with a 192 address.

Per chance did you configure both your iPhone and iPads to use a Static IP address that was assigned an address in the 192.x range?
Settings > Wi-Fi > Select the info icon for your Wi-Fi network > Under IP ADDRESS note if DHCP, BootIP, or Static is selected.
If DHCP is already selected, select Renew Lease to request a new IP address from the AirPort Extreme's DHCP service.

Trouble With a Wi-Fi Network

Similar Messages

Maybe you are looking for