Trouble with AirTunes - conflicting channel noise?

Hi there
I have just bought an Airport Express with AirTunes. The device works great - but thus far I have only been able to successfully play music on the network it creates - I haven't been able to use WDS or get it to join a network and still stream music without there being constant pauses in playback through AirTunes. I thought this might be down to there being three WLANs in the close area which are operating on the higher end of the channel spectrum. I was able to change the channel on one of these WLANs so it now operates on channel 4, but there are two WLANs which have the same signal strength still operating on channel 11,12 or 13. The thing is when monitoring in Kismac, they seem to hop between channels quite quickly. I thought this might be because they are trying to avoid noise: but they seem to hop at the same time. When one jumps ship to channel 11 from channel 10, the other seems to.
What I'm asking is, does anyone have any experience of pauses/delays/gaps in AirTunes playback and could this be the problem?
I'm also trying to get the Express to act as a repeater, but that's another story. The problem there is that I don't have access to the settings of the main router (my neighbour kindly shares it) so I can't update firmware/change WDS options on it.
Thanks!

Don't wire your the task out on the Create Task to the input of another task.
Not sure what you mean.  Those are CREATE CHANNEL functions I'm calling, and the point of them is to ADD a CHANNEL to an existing (or new) task.
I want ONE task that combines the voltage channels and the strain-gauge channels, and I READ the task to get all the channels together.
If it's not legal to add a channel to an existing task, then I should get an error, and the input TASK INPUT would be worthless.
The weird thing is, it seems to work on the real hardware (with 4 voltage + 1 strain). At least my client hasn't complained and it's an important channel.
But it looks like I can't trust the simulation.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

Similar Messages

  • I'm having trouble with a multi channel acquisition and download with PXI-5922

    I am having trouble with getting data out from both channels of a PXI-5922.  My software seems to be working, but when I do the fetch there is no data for the second channel.  I am using the same format for all of the channelList inputs (0,1).  I've checked the instrument handles and anything else I can think of, but this is my first time trying to collect data on 2 channels of a digitizer.  Any help would be appreciated.

    Hi schliepe,
    Try checking your code against an existing example. The
    Developer Zone Example: Independent
    Channel Configuration with NI-SCOPE is a good VI to reference. Also note
    that there are several examples that come with the NI-SCOPE driver. They can be
    found in Windows by going to Start »
    Programs » National Instruments » NI SCOPE » Examples. Additionally, if you find that the examples are not working either, verify that both channels are functioning by running the
    NI-SCOPE Soft Front Panel.
    Please post back if you have any questions. Have a great
    day!
    Ryan D.
    District Sales Manager for Boston & Northern New England
    National Instruments

  • Trouble with airtunes

    Ok, so this past thursday got my brand new airport express and after following the instructions on the documentation and on the so called "friendly interface" it crippled my whole network...my computer wasn't able to see the wireless signal coming from the router, after getting some help from my ISP I asked the guy if he was familiar with the "apple device" and he said he was unable to help me with that but it appear that the when the airport asked me for a 64bit password and that I have a 128bit one....he said to look for the option to change that and it would work....
    Now I went back and looked all over the thing and couldn't find it....where is it and how do I change it?
    Thank you and sorry for writing a book :P

    So nobody has an Idea on how can I use my 128bit WEP pass on my apple airport express?

  • Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

    can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

    OK, let's try these................ 
    1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu.  When done, restart back to your desktop, repair permissions and restart your computer.  Re-connect your printer. 
    2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1.   Repair permissions, restart your computer & re-connect your printer when done.
    The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
    3 - Check out the following KB Articles:
    Mac OS X 10.4 Help: Connecting to a network printer
    Epson Printer Drivers v2.10 OS X
    Adding a printer to your printer list in Mac OS X
    Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
    ======================
    If still unsuccessful after trying all of the above, the problem could be your iBook or human error.  You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

  • X-Fi Xtereme Music mode switching and troubles with channels redirection

    Good Day.
    I have bought a X-Fi sound card and now I have troubles with my speaker system. I have analog stereo system and headphones, I connect them using my amplifier. All cables are connected properly.
    When I use entertainment mode there are no problems with speaker system if 2.0/2.1 is set. But if I set headphones channels become redirected: left becomes right and right becomes left.
    When i use game mode channels are redirected both in 2.0/2.1 and headphones modes.
    If I connect my headphones to sound card directly there are no problems excepting entertainment mode 2.0/2.1 when channels are redirected.
    Please halp me to resolve the problem.
    Thank you.

    Don`t care. I have found the way. Now all clear.:smileyvery-happy:

  • Experiencing increased channel noise levels on PXIe4497 with 1071 fan on HIGH

    I am using a PXIe-4497 to collect microphone data and when I switch the PXI chassis 1071e fan to HIGH setting, the noise level increases.  The chassis is outside of an isolated test chamber, so the noise isn't occuring acoustically.  Please see the FFT plot below of fan on AUTO (white trace) and fan on HIGH (red trace).  Has anyone had this issue?
    Attachments:
    Background Measurement with PXI1071 fan on AUTO and HIGH.PNG ‏89 KB

    There was some noise getting the pass through into the chamber.  We added more sound insulation to block it out.  Here's what it looks like with the added insulation (FAn on HIGH, white trace is with added insulation):
    But as you can see there are ~256Hz harmonics.  The data below is for MIC Y which is last channel the PXI-4492 (first module).  The difference between AUTO and HIGH settings is now:
    Here is MIC Z which is first channel input on the next module PXI-4497:
    Auto and HIGH fan settings are close to being similar for MIC Z>  Here are MICs X (white), Y(red), and Z (green) plotted together with fan on HIGH...X and Y are on PXI-4492 (last two inputs) and Z is on PXI-4497:
    As you can see MIC Z doesn't have the 256Hz harmonics.  We swapped the Z with the Y channels to see if it was MIC or channel related.  Below is MIC Z in last input channel of PXI-4492 (where MIC Y was originally):
    The noise follows the input channel, not the MIC.  Here is the other side of the swap...MIC Y in first input channel of PXI-4497:
    No significant change now between Auto and HIGH fan settings.
    This seems to be input module related....
    What now?

  • Trouble with audio channels

    Hi. I'm having a bit of trouble with creating audio tracks. Say if I create a few audio tracks, I'll put a loop on one of the tracks and the signal goes through to the next track down and plays the loop on two tracks instead of one. anyone know why this is happening?

    I've never encountered this so I can't really say. I can't imagine that you're running out of Audio objects as they are 256 Audio objects available in Logic. So if you've used 256 Audio objects already Logic can't create new Audio objects and will assign each new track to the same object. But I don't see this being the problem in your case.
    Anyway check the track configuration by control+clicking/right clicking onto the track headers and checking to which Audio objects the new tracks are actually assigned.

  • Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

    I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
    # lsusb
    Bus 004 Device 002: ID 8087:8000 Intel Corp.
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
    Bus 003 Device 003: ID 8087:07dc Intel Corp.
    Bus 003 Device 002: ID 8087:8008 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    # dmesg
    [ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3433.781119] media: Linux media interface: v0.10
    [ 3433.809842] Linux video capture interface: v2.00
    [ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
    [ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
    [ 3433.835976] usbcore: registered new interface driver uvcvideo
    [ 3433.835977] USB Video Class driver (1.1.1)
    Unfortunately, *most of the time* the camera seems invisible to my system, and I get
    # lsusb
    Bus 004 Device 002: ID 8087:8000 Intel Corp.
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 003: ID 8087:07dc Intel Corp.
    Bus 003 Device 002: ID 8087:8008 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    (note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
    # dmesg
    [ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
    [ 480.171097] usb 3-1.3: device descriptor read/64, error -32
    [ 480.341235] usb 3-1.3: device descriptor read/64, error -32
    [ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
    [ 480.578007] usb 3-1.3: device descriptor read/64, error -32
    [ 480.748151] usb 3-1.3: device descriptor read/64, error -32
    [ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
    [ 481.325196] usb 3-1.3: device not accepting address 6, error -32
    [ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
    [ 481.798926] usb 3-1.3: device not accepting address 7, error -32
    [ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
    Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
    I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
    I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
    Anyway, such a hack is unacceptable... So, my questions are:
    is it indeed related to overcurrent protection ?
    is there anything else I can try ?
    should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
    If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
    Last edited by $nake (2014-10-18 16:29:06)

    uname -a
    Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
    pacman -Qi linux
    Name : linux
    Version : 3.9.4-1
    Description : The linux kernel and modules
    Architecture : x86_64
    URL : http://www.kernel.org/
    Licences : GPL2
    Groups : base
    Provides : kernel26=3.9.4
    Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
    Optional Deps : crda: to set the correct wireless channels of your country
    Required By : nvidia
    Optional For : None
    Conflicts With : kernel26
    Replaces : kernel26
    Installed Size : 65562.00 KiB
    Packager : Tobias Powalowski <[email protected]>
    Build Date : Sat 25 May 2013 16:28:17 CEST
    Install Date : Sun 02 Jun 2013 15:30:35 CEST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature

  • Trouble with 3 ATV to connect to iTunes in one WiFi / LAN

    Hi community,
    I've trouble with my ATVs in my network. I have 1 3Gen. ATV connected via LAN to iTunes on iMac and 2 2Gen. ATVs via WiFi. The problem I am facing is, if I am connected with two of them to my iTunes Library the third can't even the others ( which have been conneted) are off. If I restart iTunes, I can connect again two of them and the third (doesn't matter which one) cannot. So I can circle arround which one gets connected but it is not very satisfying. 
    My network is setup on two Airport express and a TC 2Gen to cover the whole house. As I stated above, the ATV 3Gen is connected via Lan, and the other two via WLAN?
    Any idea what I've made wrong, or what to do to find the problem?
    Thanks in advance

    Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
    To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
    If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
    Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

  • HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

    Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
    Hi all,
    When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated.  However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
    Thank you!
    HN

    Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG?  Show the same area of the photo and zoom to 100%.
    It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
    The amount of grain depends on the ISO sensitivity setting on the camera.

  • Intermittent Audio Drop-offs with Airtunes to Apple TV

    A number of other threads have similar problems. iMac 2.8 GHz iTunes 8.1 is connect to an updated ATV via new dual-channel ABS on the "n" band. Still there are audio drop offs with AirTunes as it did with the previous ABS Extreme n and previous version of iTunes. So much so, I just gave up and used the Apple Remote on the iPhone to play ATV. Any suggestions would be appreciated.

    Switching from WEP to WPA/WPA2 personal seems to have totally cured the dropouts for me.
    Also I used an old flying saucer Airport as the receiver via ethernet out for my entreatment center instead of using the AppleTV's wireless.
    Also I had a Panasonic security cam that didn't support WPA so I used another flying saucer Airport via ethernet out as its receiver.
    So now my setup is,
    Airport Extreme in my home office as my main base station with a Motorola ADSL 2200 router feeding it internet.
    Flying saucer Airport via ethernet and a hub feeding my AppleTV, DirecTV DVR, and a Mac mini.
    Another flying saucer Airport via ethernet feeding my Panasonic security cam.
    Airport Express for my bedroom speakers.
    All airports are in bridge mode with the Motorola 2200 DSL modem acting as my router. (this seems to be the only way my Vonage adapter recovers without having to be reset if my DSL goes down)
    I steam music from my 17" Macbook Pro to the AppleTV and Bedroom speakers all day now without any dropouts.

  • How do you get 32-bit float effects to work with an alpha channel?

    I make a few bugs and lower thirds, but I'm having a lot of trouble getting 32-bit float effects to correctly export with transparency.
    When I make semitransparent animations with bright lighting effects, they look great in AE but I can't seem to find any way to bring them over to Final Cut and get them to look like they should.
    I've attached this example of a bug with a screenshot from AE on the left and from FCP on the right. The colors dim and the vibrant blue gradients get flattened into a dull greenish color.
    So far as I can tell, all my alpha and color management settings are correct. I've tried endless settings options and codec options to try to fix this, to no avail.
    You can create an extreme case as an example by creating a semitransparent shape, cranking the color way up to a saturated superwhite color, and moving it around with motion blur. The render looks pretty much just like a 8/16 bit render, and nothing like it did in your canvas.
    I have a feeling the way AE multiplies the superwhite color values with the alpha channel gets "lost in translation" when it is rendered to 4 8-bit channels. Is there any way to get it to look the way it does in the canvas?
    Thanks,
    Clint

    Thanks so much for your ideas. I'd already tried experimenting with a number of color management options, including 'Preserve RGB' and turning off 'Convert to Linear Light' but they didn't fix it. I had also already tried using the "None" option from the codec menu.
    I pulled it back into AE, and it looks the same as it did in FCP.
    I'm starting to think the issue has something to do with AE rendering to a file differently than the way it renders to the canvas. For example, here's a fast moving 50% opaque superwhite shape in the AE canvas:
    I rendered this using Animation + Alpha using Best settings and 32-bit float, and reimported it into AE:
    I think the answer may lie in the fact that the first image looks solid white in some places, even though it is 50% transparent. It's almost like the excessive RGB values "bleed" over to the alpha channel. The rendered image (probably correctly) looks grey because it represents white at 50% opacity.
    What I want to do though, is find a way to make my render look like my canvas. So it seems I need to do two things to the image:
    1. Find a way to increase opacity in areas of excessive white, so that they are not grey in the render.
    2. Find a way to "bake" the superwhite colors to a level below 100% white so that they show up in the render.
    I tried the "Alpha from Max Color" effect and this seems to get kind of close, but unfortunately it discards other parts of the alpha channel (like drop shadows).
    It might also be helpful to know that when I have AE output to an external NTSC monitor (via Intensity card) the monitor shows the exact same artifacts as the render.

  • Networking troubles with ABIT BP6 board and Solaris 8

    Hi, Im trying to install the Solaris 8 software on my ABIT BP6 board with a Compaq NetFlex3 10TX NIC. This is a SMP board (dual celeron) but is not on the HCL (the NIC is).
    The installation gives no problems at all (except for a memory conflict between memory devices), and SunOS works pretty well except for networking... using ifconfig -a shows me the networking interface and the loopback interface but I can't ping outside of the Solaris machine (or ping to the Solaris machine from an other machine).
    I know that the board is not on the HCL but I had no networking troubles with Solaris 8 early access.
    After instalation of the software and the reboot, I get the status as below:
    >
    configuring IPv4 interfaces: cnft0.
    Hostname: MILLIWAYS
    Configuring /dev and /devices
    Configuring the /dev directory (compatibility devices)
    The system is coming up. Please wait.
    checking ufs filesystems
    /dev/rdsk/c0d0s7: is clean.
    All devices are configured...
    Configuring network interface addresses: cnft0.
    RPC: Timed out
    Starting IPv4 routing deamon.
    starting rpc services: rpcbind done.
    Setting netmask of cnft0 to 255.255.255.0
    <
    As you can see I get a time out while configuring the NIC. I tried a lot of different things (and some bad ones like using the device driver disk of the EA version with the cd's of the final version but no luck there...)
    Anyone with the same problems or any help?
    Thanx, Marcel

    Hi maeck,
    I'm sorry that my message is off the topic. Could you help me with a problem that I have with Abit BP6 + Solaris 8 combo?
    I'm encountering error message on console screen during booting/reboot/shutting down like "APIC error interrupt on CPU 0. Status=2" where CPU can be 0 or 1, status can be 0, 2, 4 or 6.
    If I let my dual Celeron400 run at 400MHz, the frequency of errors is few and far between. Though it still happens. If I overclock them to 558MHz like I udually do, it will show at least 4 times during a booting process. I've tried MPS 1.1 and 1.4 settings. I've also tried turning off all cache, delayed transaction, passive release settings.
    In addition, the overclocked system tends to lock up while it runs flawless in Windows 2000 Professional and Redhat 6.1. Do you have any similar experience?
    My system config:
    Abit BP6 motherboard
    400 MHz CPU X 2
    GlobalWin FEP32 X 2
    128M SDRAM
    Creative Labs 3DBlaster TNT2
    13GB Maxtor DiamondPlus 6800
    Acer 10x DVD drive

  • Strange trouble with Color

    I experience strange trouble with Color I can't overcame. I try to export DPX sequences in Color ("manually") without using Final Cut. I navigate in setup room to my folder where the files are stored and after I open that folder there is nothing there at all. I tried different folders as well sometime it opens empty and I have to go back up and open folder again to be able to see the contents. But some folder are never "refresh" always opens empty , but I am 110 present sure there are files in them ( I check in Finder). This starts to happen after 10.5.2 update. I have no idea what to do with this and how to overcame that problem., please help.
    My setup is Mac pro 2x2.66Mhz , 3GB Ram, ATI Radeon X1900 video card, 2 Apple cinema displays.
    Mac OS X 10.5.2, Color 1.0.2
    Thanks!

    Let me see if I understand this...
    What you are attempting to convey is that you are trying to import .dpx files into COLOR directly and that COLOR does not recognize the files.
    My bet would be that there is an issue with the .dpx file format. It may be the way they are written, stored, named, the bit-depth... any number of issues. The fact that they don't show up is COLOR's way of telling you that there is a compatibility problem. My experience is that 10-bit and above is poorly handled at the moment, and is not supported at all by some previous versions of Quicktime and Shake, for example, under Leopard, and not even Tiger .4.11. What I started getting were perfect proxy renditions, but actual rendered material was almost pure noise, except there were shadowy remnants of the original scene.
    Consider yourself lucky that the application stopped you at this point, rather than allow the project to go forward, then corrupt after you had devoted a considerable amount of your time and energy to it, then have to go back to fix the original files and do ti all over again, or struggle with reconform, etc.
    jPo

  • Trouble with Ip redirect

    I am having a bit of trouble with ip redirects on an airnet 1042N
    Here is what happens, I turn off ip redirect, everything works fine, turn it on, everything works fine.  The problem is when I apply an ACL to it.
    If I apply an ACL, I can ping web sites, but I can not browse websites or telnet to port 80.  This is simply a test configuration before I move it into production.  10.0.0.0/22 is our subnet.  I want the guest ssid to allow access to the internet, but not the the internal network (with the exception of the gateway (10.0.1.254) , dhcp, and dns servers (same server 10.0.1.221)
    Running config
    Current configuration : 2475 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname testap
    logging rate-limit console 9
    enable secret 5 $1$PBvp$dH8HqNdXBTP7eCzYanRRo.
    no aaa new-model
    dot11 syslog
    dot11 ssid main
       authentication open
       authentication key-management wpa version 2
       wpa-psk ascii 7 1234567890abcdefghi
       ip redirection host 10.0.1.254 access-group 102 in
    dot11 ssid secondary
       authentication open
       authentication key-management wpa version 2
       guest-mode
       wpa-psk ascii 7 075E731F1A5C4F524F4B5B0D06292F212E343D2B
       ip redirection host 10.0.1.254 access-group 103 in
    username Cisco password 7 01300F175804
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption mode ciphers aes-ccm
    ssid main
    ssid secondary
    antenna gain 0
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio1
    no ip address
    no ip route-cache
    shutdown
    antenna gain 0
    dfs band 3 block
    channel dfs
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0
    ip address 10.0.2.150 255.255.252.0
    no ip route-cache
    duplex auto
    speed auto
    no keepalive
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address 10.0.2.150 255.255.252.0
    no ip route-cache
    ip http server
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    access-list 101 permit ip any host 10.0.1.254
    access-list 101 permit ip any host 10.0.1.221
    access-list 101 deny   ip 10.0.0.0 0.0.3.255 10.0.0.0 0.0.3.255
    access-list 101 permit ip any any
    access-list 102 permit ip any 10.0.0.0 0.0.3.255
    access-list 103 permit 80 any any
    access-list 103 permit ip any host 10.0.1.254
    access-list 103 permit ip any host 10.0.1.221
    access-list 103 deny   ip 10.0.0.0 0.0.3.255 10.0.0.0 0.0.3.255
    access-list 103 permit ip any any
    access-list 120 permit ip host 10.0.3.41 any
    access-list 120 permit ip any host 10.0.3.41
    bridge 1 route ip
    line con 0
    logging synchronous
    line vty 0 4
    login local
    end

    James:
    Welcome to the forum.
    To enable both encrypted and unencrypted traffic on same radio you need to use VLANs. If you are using only the native VLAN then you are abide by only one encryption method for all SSIDs.
    Check this for multiple SSIDs and multiple VLANs:
    https://supportforums.cisco.com/docs/DOC-14496
    For your network above, you should review the ACL and make sure it allows the needed traffic. Make sure both ports 80 and 23 are opened. Make sure to choose correct ports (udp, tcp) on the ACL.
    You can also try configuring ip redirect from GUI. give a look to the ip redirect doc: http://tiny.cc/gdsekw.
    HTH
    Amjad
    Rating useful replies is more useful than saying "Thank you"

Maybe you are looking for