Trouble with audio during calls

I am hoping someone can offer a solution to the following problem: I have an iPhone 4 that that works normally except when making calls either outgoing or incoming and the problem is sporadic, meaning sometimes the problem doesn't exist. Sometimes when connected on a call, I cannot clearly hear the other person, it's like staticky and garbled, they can hear me fine though. Any suggestions? I am eligible for an upgrade but don't want to upgrade for fear that I may lose my unlimited data.

Thank you for your responding, this has been frustrating to say the least, I just can’t understand why sometimes it works and sometimes it doesn’t, this has been the case both in the area where I live and in Louisiana when I unsuspended the line upon my return from deployment overseas within the last month. Please see the answers to your questions below:
Are you noticing this in certain areas? It seems to be regardless of the area I am in.
Are you using a Bluetooth or headset? No
When was the last time you dialed *228 option 2? Just tried it and it doesn’t seem to have helped.
Does it sound the same when speakerphone is activated? Yes
How about when the volume is adjusted? Adjusting the volume does not seem to have an effect.

Similar Messages

  • No audio during calls

    iphone 4 just replaced because it would not charge and now i have no audio during calls all other sound works fine was doing the same on ios 5(what the phone came with)

    just did hard restart still no fix

  • Audio during calls

    Hi, For the last few days (thinking about it, since I updated to iOS 6.0.1) I have been having a problem with the audio during calls. The sound keeps cutting out intermittently, so it sounds like I only hear every other word from the person I'm talking to. It only seems to happen when I call someone, not when I receive calls. Any advice would be helpful, thank you x

    just did hard restart still no fix

  • Still having trouble with audio on Macbook Pro

    I had posted a discussion board earlier on this issue. I've been having trouble with audio for certain videos on youtube and basically any website embedded with a video. The audio works for a few seconds that doesn't or it doesn't work at all. My volume is up, not on mute, and the one on the video isn't on mute either. It's funny because I just tried watching a video on Firefox (as opposed to Safari) and it works. Could it possible be something with the settings for safari?

    Try restarting your Mac, resetting your router, and resetting your modem. My cable internet has gotten slow at times as well, and when I reset my router everything cleared up.

  • HT4623 my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

    my iphone 5 is not getting audio during calls, im not hearing anything unless i put it on speaker. Can you help me is this a software problem its very annoying for every call i dial or recieve i have to put on speaker. Please help me apple please.

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • Trouble with audio driver HPG60-243C​L

    Hello.
    A few days ago, I needed to format my notebook (model G60-243CL) and I did everything just like I'm used to do. I reinstaled Windows 7 and after instaling the drivers downloaded from HP drivers page, I had to restart the computer. That's when my troubles began.
    Sometimes, when starting up, everything goes on properly until the Windows loading screen, when my computer suddenly restarts again. It doesn't happen everytime and it seems a bit random to me. However, I noticed that when it finally turns on after restarting several times, the audio is a bit odd in every application that involves audio like musics players, videos and games.
    On the rare occasions where my notebook manages to start up properly, the audio stays normal.
    I already tried formating again, reinstaling the audio drivers and codecs, but nothing seems to work. Does anybody have any suggestions?

    Uncle_Sam wrote: I wrote a simple Java application to record audio ..
    There is no simple way to record sound in Java, AFAIU.
    Uncle_Sam wrote: ...on some mixer and then play it back. ...
    Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
    Is it not possible to record computer audio when a microphone is connected? If it is, how?
    Significant question. Are you interested in getting this code to work for the machine you sit in front of, or is this for 'the general end user'?
    I have no general solution for the latter, but for a single machine, installing an 'audio loop-back' (either software or hardware) might be the answer. That is the most intelligent thing I can offer that might help get around this problem.
    (Note, also posted as ) [Trouble with audio devices|http://groups.google.com.au/group/comp.lang.java.programmer/browse_frm/thread/9983c6cd3e8204fd/e40278adaa2854cf] on usenet newsgroup comp.lang.java.programmer, and no, I personally do not consider that to be either a cross-post or multi-post (if anyone is interested in my opinion!).

  • Trouble with audio devices

    I wrote a simple Java application to record audio on some mixer and then play it back. With my headphones / microphone connected, I got the following list of mixers:
    1. Primary Sound Driver : Direct Audio Device: DirectSound Playback
    2. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Playback
    3. SoundMAX HD Audio : Direct Audio Device: DirectSound Playback
    4. Primary Sound Capture Driver : Direct Audio Device: DirectSound Capture
    5. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Capture
    6. SoundMAX HD Audio : Direct Audio Device: DirectSound Capture
    7. Java Sound Audio Engine : Software mixer and synthesizer
    8. Port Microsoft LifeChat LX-3000 : Port Mixer
    9. Port SoundMAX HD Audio : Port Mixer
    Of these, mixers 2, 5 and 8 are not available when the headphones are detached, as expected.
    Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
    Is it not possible to record computer audiio when a microphone is connected? If it is, how?

    Uncle_Sam wrote: I wrote a simple Java application to record audio ..
    There is no simple way to record sound in Java, AFAIU.
    Uncle_Sam wrote: ...on some mixer and then play it back. ...
    Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
    Is it not possible to record computer audio when a microphone is connected? If it is, how?
    Significant question. Are you interested in getting this code to work for the machine you sit in front of, or is this for 'the general end user'?
    I have no general solution for the latter, but for a single machine, installing an 'audio loop-back' (either software or hardware) might be the answer. That is the most intelligent thing I can offer that might help get around this problem.
    (Note, also posted as ) [Trouble with audio devices|http://groups.google.com.au/group/comp.lang.java.programmer/browse_frm/thread/9983c6cd3e8204fd/e40278adaa2854cf] on usenet newsgroup comp.lang.java.programmer, and no, I personally do not consider that to be either a cross-post or multi-post (if anyone is interested in my opinion!).

  • Trouble With Audio Coming Out of Sync

    I am having trouble with audio sync
    I am using .mov files of myself talking however I also record audio of myself talking as well. The audio files record as mp3 however I convert them to aiff files in order to better synch them in FCP
    I have an audio sound as an in point in order to better sync them and the syncing is perfect when i start.
    My files are about an hour and a half long and 20 minutes or so the audio starts to come out of sync and my mouth becomes a half second or so behind the audio. I record this audio live so there is no delay between my speaking and my recording voice but the longer the video goes the more out of sync I become.
    My syncing method that I use is "Merge Clips" at the in points.
    Has anyone else experienced this?

    All sorts of things you can do.
    Easiest fix is just to run down your timeline and every few minutes snip the audio and move it back into sync.
    Now after that;""
    Qe have no idea what your process was. We assume you're editing in Final Cut. How did you import your footage? What format is it in the browser?
    what are the settings of your timeline? Look at the sequence settings.
    You know that you can plug audio from
    mic into a Zi8?
    You need to get rid of the mixer hum. Likely ac electrical
    interference , a ground fault, but who knows.

  • Video losing sync with audio during playback

    I am having a unique issue with FCP 6.0.6.
    We are using this version to log and capture a switched video feed with audio
    through a Black Magic DeckLink HD Extreme 3  PCI card.  Capture works fine. 
    But during playback the next day, the video seems to drop a frame, or lose sync
    (you can see it visually) then continues playing.  The result is the video is now
    out of sync with the audio.
    We do a weekly 3 camera shoot which is webcast, and then later uploaded to youtube.
    We have been running this setup for a number of years without issue, but this has started
    becoming an issue the last 3 weeks in a row with no change to our setup.
    The webcast does not experience this, which makes me think there is a sync issue
    between my switcher and my FCP machine.
    Any thoughts or ideas?
    Mac Pro
    3GHz Quad Core Intel
    16 GB Ram
    OS 10.6.8

    Are you ABSOLUTELY sure there was NO change? (All sorts of problems can occur if you haven't turned off automatic updates.)
    In any case, you might want to run Preference Manager from Digital Rebellion (free) to delete the FCP prefs. Sometimes they get corrupted and can cause some funky behaviors.
    Otherwise, sounds like a question for Blackmagic technical support.
    x

  • No audio during call transfer and

    I am installing a new CUCM BE6000 ver 9.1.2 platform, with CUCM , Unity connection, and presence server.
    I am configuring on Unity Connection server the System Call Handlers for basic IVR functions, with the following options:
    a) Option 2  ----> Directory handler
    b) Option 0 (or do nothing)  -----> Operator's DN 1100
    c) Option to dial party extension during call.
    We have 2 configuration problems:
    Problem1:
    When you select option "2", "0" or dial the party extension the call is transfer with no problem BUT we got silence during this transfer (before user takes the call or the call goes to user's Voice Mail)......., no rings, no MoH, nothing. So we would like to know which parameter is missing that could prevent to hear rings' sound or the MoH until client takes the call or the call goes to VM.
    Problem2:
    If you select option 0, the call is properly transfered to operator's DN 1100, but if the caller does NOTHING the call goes to operator's VM  instead to be transfer to DN 1100 ( DN 1100 never rings, the call goes to VM)
    Here we need to know how we can set this System Call Handlers to transfer the call to DN 1100 when user does nothing.
    THANK A LOT IN ADVANCED FOR YOUR HELP.
    Enrique

    I am installing a new CUCM BE6000 ver 9.1.2 platform, with CUCM , Unity connection, and presence server.
    I am configuring on Unity Connection server the System Call Handlers for basic IVR functions, with the following options:
    a) Option 2  ----> Directory handler
    b) Option 0 (or do nothing)  -----> Operator's DN 1100
    c) Option to dial party extension during call.
    We have 2 configuration problems:
    Problem1:
    When you select option "2", "0" or dial the party extension the call is transfer with no problem BUT we got silence during this transfer (before user takes the call or the call goes to user's Voice Mail)......., no rings, no MoH, nothing. So we would like to know which parameter is missing that could prevent to hear rings' sound or the MoH until client takes the call or the call goes to VM.
    Problem2:
    If you select option 0, the call is properly transfered to operator's DN 1100, but if the caller does NOTHING the call goes to operator's VM  instead to be transfer to DN 1100 ( DN 1100 never rings, the call goes to VM)
    Here we need to know how we can set this System Call Handlers to transfer the call to DN 1100 when user does nothing.
    THANK A LOT IN ADVANCED FOR YOUR HELP.
    Enrique

  • Trouble with audio channels

    Hi. I'm having a bit of trouble with creating audio tracks. Say if I create a few audio tracks, I'll put a loop on one of the tracks and the signal goes through to the next track down and plays the loop on two tracks instead of one. anyone know why this is happening?

    I've never encountered this so I can't really say. I can't imagine that you're running out of Audio objects as they are 256 Audio objects available in Logic. So if you've used 256 Audio objects already Logic can't create new Audio objects and will assign each new track to the same object. But I don't see this being the problem in your case.
    Anyway check the track configuration by control+clicking/right clicking onto the track headers and checking to which Audio objects the new tracks are actually assigned.

  • I'm having trouble with a toolbar called searchqu that I do not remember installing, it will not allow me to have MSN as my homepage, I removed the add on but still have the problem. Thoughts?

    had an add on installed somehow called searchqu. It will not allow me to have msn as my home page. I removed the add on and still have the same trouble.

    Hi!
    My name is John and I'm a member of the Searchqu support team, I'm here to assist! :)
    When a software was installs onto your pc it offered two basic installs, typical installation, which lists the add-on features such as searchqu default search, and Custom installation, which allows you to select the add-ons that you wish to install. There's no need to worry if you did the typical install - this isn't a virus,
    nor malware, and there's no need to Perform a virus scan against it.
    In order to change Searchqu as your homepage please check the following: http://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page
    For visual instructions please check: http://bit.ly/searchqutoolbar
    We are here to help with any further question :)
    The Searchqu support team.

  • Problems with audio during video after itunes update

    Recently updated to the new itunes and now there is no audio only during video playback. Tv shows and movies that previously played fine other than synchronization issues now have no audio. Help!

    Hello Marcr
    If you installed "dreamrecorder" on only one of your Mac laptops, you can use the other Mac to test your iSight to ensure it is functional. Try the suggestions in the " iSight: How to Troubleshoot" link there, too. Once you know that your External iSight is working correctly, you can concentrate on repairing the problem apparently caused by your "dreamrecorder" installation.
    Third party applications can sometimes cause conflicts with iSight, especially if they are not installed or uninstalled properly.
    Some applications provide "uninstallers" or specific instructions for all steps required to do a proper uninstall. If your "deinstalling" was accomplished by simply dragging such an application to the trash, some changes made when you installed the software may remain and be the cause of your problem. Check the Help or readme documentation for the "dreamrecorder" to be sure you uninstall correctly. Follow those instructions exactly.
    You may need to reinstall the software to find the Help or readme info. If you do not want to reinstall to find the Help or readme files, or if they do not give you the help you need, you should be able to get the answers from the software developer's website. The developer may have FAQs, online documentation, or a support forum dedicated to his specific software. Many developers also offer technical support contact information to give you technical assistance by phone or email.
    If none of those help you, the best suggestion I can offer for your "dreamrecorder" questions is a Google Search.
    Jim

  • Audio during Call is muted after Switch-off of Pho...

    1. Pair with Car infotainment system,
    2. Connect as BT Audio & as a BT handsfree kit,
    3. Switch off bluetooth without disconnecting (or unpairing) with Car's Audio Infotainment System.
    4. make an incoming or outgoing call after phone's BT switch off.
    Expected: Call should be normal.
    Actual: Call is in progress but audio is muted from phone's speaker because Nokia 5230 is still assuming BT paired device presence.
    Recovery: Phone switch OFF-ON

        This is not how bluetooth is suppose to work and especially with such an awesome phone MBalmer. What bluetooth device do you have? Did you purchase your bluetooth device from? Let's try removing the connection with your bluetooth and phone completely and then reconnect them. Does the disconnection occur in certain spots? Are you using a special application for bluetooth? I look forward to hearing from you so we can get ths resolved.
    KinquanaH_VZW
    Follow us on Twitter @vzwsupport

  • Having trouble with audio edit to tape, print to video ok

    Hi all, please go easy on me, this is my first post.
    I am having difficulty getting audio on to tape via 'edit to tape'.
    The hardware is blackmagic decklink extreme, feeding component video and analoge audio to a UVW-1800P.
    I can do a print to video on a crash record and the audio works that way, but edit to tape does not.
    I have tried both deck link and built in audio in the audio settings and the FCP a/v settings, seperate and ganged output settings, I have set the insert settings to 2 channel Sony, reloaded the decklink drivers.
    The irritating thing is the audio is there whilst cutting, but as soon as I try edit to tape there is complete silence. The important thing is that it worked a few weeks back but does not now, it must be a setting?
    Thanks in advance for your help.
    This machine I am working with this week is an Intel MacPro running FCP 5.1.2 and Mac OS 10.4.8
    G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade   Mac OS X (10.4.8)  
    G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade   Mac OS X (10.4.8)  

    I had this same problem and this resolved it for me:
    -Go to your "Settings" icon and click on the "General" tab.
    -About 2/3 way down the page you will see "Use side switch to:" - make sure "mute" is checked rather than "lock rotation."
    -Then make sure the side switch, located next to the volume toggle switch on the side of your ipad, is moved to the right (no red dot showing).
    My audio worked fine in embedded videos after I did those two things.  Hope it works for you.

Maybe you are looking for