Trouble with audio for ipod movies

Hey
I recently converted a few videos to my ipod where they all successfully went on. However, when I play them the audio does not appear to be there and you cannot hear anything. Eventhough the volume is at its highest and listening to music s perfect.
Can anyone help me with this?
Thanx

iTunes and Quicktime (and Quicktime Pro, as well) don't convert multiplexed video files well for iPods; it ends up that the video files don't play sound in the file on an iPod.
(iTunes saves the audio and video parts of the file on the same track, as opposed to a different parts of the video file; this doesn't work for iPods when they plays videos coverted in this way)
In this case, you'll need to try using a third-party program in order to properly convert the videos for your iPod.
Try MPEG Sreamclip for a good converting program (it's compatible for both Mac and Windows, by the way).
Be sure to convert it to a MPEG-4 file type, of course, and the audio should work out okay.
-Kylene

Similar Messages

Still having trouble with audio on Macbook Pro

I had posted a discussion board earlier on this issue. I've been having trouble with audio for certain videos on youtube and basically any website embedded with a video. The audio works for a few seconds that doesn't or it doesn't work at all. My volume is up, not on mute, and the one on the video isn't on mute either. It's funny because I just tried watching a video on Firefox (as opposed to Safari) and it works. Could it possible be something with the settings for safari?

Try restarting your Mac, resetting your router, and resetting your modem. My cable internet has gotten slow at times as well, and when I reset my router everything cleared up.

I'm having trouble with syncing my iPod to my computer.

I'm having trouble with syncing my iPod. It gets stuck on the last step saying, "Waiting for changes to be applied." It's been doing this for the last half hour. Is there anything I can do to correct this or is am just going to have to restore my iPod?

You can sync/manually mange iphone with one and only one computer. If you sync/manually mange to anther, then it will erase the current content and replace with content from the new computer.
What "trouble" are you having?

Trouble with audio driver HPG60-243CL

Hello.
A few days ago, I needed to format my notebook (model G60-243CL) and I did everything just like I'm used to do. I reinstaled Windows 7 and after instaling the drivers downloaded from HP drivers page, I had to restart the computer. That's when my troubles began.
Sometimes, when starting up, everything goes on properly until the Windows loading screen, when my computer suddenly restarts again. It doesn't happen everytime and it seems a bit random to me. However, I noticed that when it finally turns on after restarting several times, the audio is a bit odd in every application that involves audio like musics players, videos and games.
On the rare occasions where my notebook manages to start up properly, the audio stays normal.
I already tried formating again, reinstaling the audio drivers and codecs, but nothing seems to work. Does anybody have any suggestions?

Uncle_Sam wrote: I wrote a simple Java application to record audio ..
There is no simple way to record sound in Java, AFAIU.
Uncle_Sam wrote: ...on some mixer and then play it back. ...
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audio when a microphone is connected? If it is, how?
Significant question. Are you interested in getting this code to work for the machine you sit in front of, or is this for 'the general end user'?
I have no general solution for the latter, but for a single machine, installing an 'audio loop-back' (either software or hardware) might be the answer. That is the most intelligent thing I can offer that might help get around this problem.
(Note, also posted as ) [Trouble with audio devices|http://groups.google.com.au/group/comp.lang.java.programmer/browse_frm/thread/9983c6cd3e8204fd/e40278adaa2854cf] on usenet newsgroup comp.lang.java.programmer, and no, I personally do not consider that to be either a cross-post or multi-post (if anyone is interested in my opinion!).

Trouble with audio devices

I wrote a simple Java application to record audio on some mixer and then play it back. With my headphones / microphone connected, I got the following list of mixers:
1. Primary Sound Driver : Direct Audio Device: DirectSound Playback
2. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Playback
3. SoundMAX HD Audio : Direct Audio Device: DirectSound Playback
4. Primary Sound Capture Driver : Direct Audio Device: DirectSound Capture
5. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Capture
6. SoundMAX HD Audio : Direct Audio Device: DirectSound Capture
7. Java Sound Audio Engine : Software mixer and synthesizer
8. Port Microsoft LifeChat LX-3000 : Port Mixer
9. Port SoundMAX HD Audio : Port Mixer
Of these, mixers 2, 5 and 8 are not available when the headphones are detached, as expected.
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audiio when a microphone is connected? If it is, how?

Uncle_Sam wrote: I wrote a simple Java application to record audio ..
There is no simple way to record sound in Java, AFAIU.
Uncle_Sam wrote: ...on some mixer and then play it back. ...
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audio when a microphone is connected? If it is, how?
Significant question. Are you interested in getting this code to work for the machine you sit in front of, or is this for 'the general end user'?
I have no general solution for the latter, but for a single machine, installing an 'audio loop-back' (either software or hardware) might be the answer. That is the most intelligent thing I can offer that might help get around this problem.
(Note, also posted as ) [Trouble with audio devices|http://groups.google.com.au/group/comp.lang.java.programmer/browse_frm/thread/9983c6cd3e8204fd/e40278adaa2854cf] on usenet newsgroup comp.lang.java.programmer, and no, I personally do not consider that to be either a cross-post or multi-post (if anyone is interested in my opinion!).

Trouble With Audio Coming Out of Sync

I am having trouble with audio sync
I am using .mov files of myself talking however I also record audio of myself talking as well. The audio files record as mp3 however I convert them to aiff files in order to better synch them in FCP
I have an audio sound as an in point in order to better sync them and the syncing is perfect when i start.
My files are about an hour and a half long and 20 minutes or so the audio starts to come out of sync and my mouth becomes a half second or so behind the audio. I record this audio live so there is no delay between my speaking and my recording voice but the longer the video goes the more out of sync I become.
My syncing method that I use is "Merge Clips" at the in points.
Has anyone else experienced this?

All sorts of things you can do.
Easiest fix is just to run down your timeline and every few minutes snip the audio and move it back into sync.
Now after that;""
Qe have no idea what your process was. We assume you're editing in Final Cut. How did you import your footage? What format is it in the browser?
what are the settings of your timeline? Look at the sequence settings.
You know that you can plug audio from
mic into a Zi8?
You need to get rid of the mixer hum. Likely ac electrical
interference , a ground fault, but who knows.

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

Click on the Layout button lower right and choose a Vertical lyout from the dropdown

Is the Hitachi AXM209UKR Slim Micro System with docking for iPod compatible with the iPhone 4 (Xmas present bought for me)? Need to know before I open box ��. Thanks all Merry Christmas!

Is the Hitachi AXM209UKR Slim Micro System with docking for iPod compatible with the iPhone 4 (Xmas present bought for me)? Need to know before I open box . Thanks all Merry Christmas!

Not to worry took back to store and got one that works with ipad2 as well

No sync with audio for input files AVI MPEG4 23.976 fps

No sync with audio for input files AVI MPEG4 23.976 fps.
If i open in Premiere Pro CC any file AVI MPEG4 23.976 fps (with internal audio MP3 or AC3) i got growing out of sync from start to end of file, even while play it at internal media player of Premiere Pro CC for source file.
Using external audio files AC3 or MP3 not help.
In properties of source file i see 23.97 fps instead of 23.976 fps, and time of internal file is wrong.
If i try Clip > Modify > Interpreter Footage > custom settings to 23.976 time i see right time, but when i click "OK", custom fps saved as 23.98 fps instead of 23.976 fps and time of source goes wrong again.
So i always get bad sync such files in Premiere Pro CC while play or export them.
But in all media players, other editors, and in PluralEyes sync OK with all such files.
If i open M2TS or MP4 (H264 23.976 fps) source file, all OK, it it shows as 23.976 fps, time is right, and sync OK.
So i want to add automatic detection 23.976 fps instead of 23.97 fps for source AVI files with 23.976 fps.
Is it possible?

Yes, i know what XviD and DivX does not edit well in Premiere Pro. And because of that i create this topic "No sync with audio for input files AVI MPEG4 23.976 fps" and was hoping to get help in solving the problem, rather than stating that the problem really is.
XviD and DivX it is MPEG4.
Xvid (formerly "XviD") is a video codec library following the MPEG-4 standard, specifically MPEG-4 Part 2 Advanced Simple Profile (ASP).
http://en.wikipedia.org/wiki/Xvid
I have many old useful materials in XviD and DivX formats, and have no other formats versions for that material.
XviD and DivX are very compact formats to store video at acceptable quality and it is fully compatible with all players and editors for PC except Premiere Pro.
You suggest to convert them to another format (DV) to make compatible with Premiere Pro... It is not what i want.
Let me explaine:
1) Size of files
uploaded AVI XviD 1280x720 file with very good quality have size 1.9Gb (with audio AC3 2.0). If i convert it via VirtualDub from "AVI XviD" to AVI DVCPRO HD 1280x720 (without audio) it have size 35Gb, and quality is worst than at XviD-HD, and also converting take much time.
2) Compatibility with AC3 and MP3 audio inside AVI
AVI DV / AVI DVCPRO not compatible with AC3 and MP3 audio inside, only with PCM
http://en.wikipedia.org/wiki/DV
AVI XviD and DivX can use AC3, MP3, OGG audio without any problems.
Size of 1Hour 30Min "AC3 Stereo 48kHz 16bit 384Kbps" file is 257Mb
Size of 1Hour 30Min "PCM Stereo 48kHz 16bit" file is 1030Mb
3) I have and use hardware H264 encoder card "Matrox CompressHD" for export my material
http://www.matrox.com/video/en/products/compresshd/specs/
This card works only from Adobe Premiere Pro, so i can not use it from VirtualDub or other editing software.
So i need a full compatibility Adobe Premiere Pro with all popular standard formats of input files.
Here we see:
http://www.adobe.com/products/premiere/extend.html#Supportedvideoformats
Supported video formats:
"Adobe Premiere Pro CC leads the industry with incredible, thorough native media support, meaning you can edit virtually all of the major video, image, and audio formats natively without waiting."
As most PC users knows, AVI XviD it is a very popular free video format, and would be very useful if Adobe will make normal compatibility with that format in Premiere Pro.

Newbe requests help with audio for slide-show on Premiere Elements 4.

I recently wrote you regarding a problem I was having with a slide show I was making on Premiere Elements 4 importing photo clips and music from PhotoShop Elements 9. Thank you for your help.
This very large slide show, some 200 clips that I have not resized is completed. I am now having many problems with the music audio I am adding to various sequences of the slide show. Specifically:the audio will not stay fixed on the places where I put it and end it. Working on the Timeline Usually the length of the audio is shorter than the ending of the photo clips where it must go. I click on the audio and stretch it and end it at the place I designate. However, the other end has moved also so now I am left with a gap where there is no audio at the beginning of the segment. Now in addition, the "Delete and Close Gap" does not work most of the time causing me to manually move the photo tiles which sometimes move when this happens. I have to move each one or two individually to the left to close the gap and many times this causes loss of one or two photo tiles or they are out of order or have increase in number (of the one I am moving).
The program has also shut down for the past 10 days causing me to lose a good deal of work and sometimes photo clips and sometimes I get many duplicates of the photo clips. All I do is edit mostly the same two segments doing this over and over because I can't proceed to importing any more music because I can't get the first segments correct. I have chatted with you people, Sony techs, Microsoft Techs and Canon Techs. The Sony techs suggested the program was at fault and I used the original installation disk and repaired the program. It has still shut down on me but not as much.
I got error messages on the photo-cap instructions page you suggessted otherwise I would show pictures of the above problems.
I tried to copy and/or cut and paste from the Timeline thinking I would start a new slide show in PhotoShop Elements 9 using the same photos in reverse. The program would not let me copy or paste. There is great difficulty in highlighting the photo tiles in Timeline because I have to shift click on each individual tile and there are too many tiles and it would take too long to get a whole segment copied. Maybe you know another way to do this?
I am at a stand-still now and I am quite despondent because I have been working on this slide-show for 3 months and it was a surprise for my daughter's 25th anniversary that was last Tuesday.
I do hope you have some good suggestions that will lelt me complete this Project and get it on a disk. I am not that technical so please be specific.
Thanks in advance.
Kathy

Here's the basic advice I'd give, based on my experience. Much depends, though, on your goals and the specifics of your computer system:
1) Resize all of your photos to no larger than 1000x750 pixels in size. This is VITAL if you want the program to maintain stability as you work. Also render often (by pressing the Enter key). When the render, the red lines above the clips on your timeline will turn green and the program will run much more efficiently.
2) Work on your large slideshow project in shorter segments. You've got over 15 minutes worth of slides. Try working on this slideshow in 5 minute segments, output each segment and then combined the finished videos.
3) Use only WAV audio as your music and audio for your slideshow.
4) When you add video, audio or stills to a parallel track on your timeline, hold down the Ctrl key to override the ripple function and your current clips will remain in place.
5) Maintain your computer by using a tool like the excellent, free, one-click Advanced System Care available at http://www.iobit.com/advancedsystemcareper.html
As for Delete and Close Gap, how it performs depends on whether you've selected Clear or Delete, whether you've pressed the Backspace key or the Delete key and if there is video or audio on a parallel track. (This is all covered in my books, by the way, if you're interested.)
Without knowing the specifics of your project and your situation, it's hard to give out more specific information -- but this advice should get you a long way toward completing your project!

HT2729 video isn't syncing with audio on rented movie

I have now tried renting three movies using iTunes on my laptop. Unfortunately, none of the movies have worked properly. The audio is about 10 seconds ahead of the film, so the sound doesn't sync with the movie. What can I do? I did get refunds for the other two movies, and will ask for one for this movie as well, but I am trying to figure out why this is happening.
Netflix and other video services work just fine on my laptop.

I'm assuming that you are using the Sound class to control
the MP3 sounds? If that is the case then they will not be sync with
your timeline and if your animations are too much for the SWF to
stay at the 30fps rate then it will slow down to complete the
animations.
One way to sync them up would be to place them in a layer in
your timeline and then in the Parameters box at the bottom set the
Sync dropdown to Stream.
Then if your movie slows the audio and animations will still
be together.
This is not as flexible as you may currently have it but it
might work for you.
Tim

I have some troubles with my lovely iPod nano :(

Dear readers
I have troubles with my iPod nano.
Trouble #1: The pictures are not in the right order (by date).
Trouble #2: Some songs just skip to the next one. **** annoying!
Trouble #3: What is error 69?
Trouble #4: I forgot how to make my iPod reappear in my iTune, so it would be very nice if you tell me how to do it.
Thanks
Nonstupid_Billy (Billy is my nickname)

Ahhh, the new Error 69. Many people but not all have the same problem. E-mail Apple about this and try to use the last version of iTunes. For the songs skipping, there is an error when syncing those songs and were not synced properly. Try reseting the ipod to factory settings

Any Mini DisplayPort to HDMI adapter with audio for macbook pro mid 2009

connecting MacBook Pro (15-inch, Mid 2009) to Hisense TV with audio?!?!!?
hello everyone.
if anyone is familar with successfully getting the older macbook pros that dont support audio out to stream and preform digital audio on a TV or has any helpful information that will get me familiar with trying to successfully stream audio and visual. and can PLEASE HELP ME in any way to understand what they know and teach me how to solve my problem id really appreciate it.
i want to connect my MacBook Pro (15-inch, Mid 2009) to my Hisense LED LCD TV, ModelNumber:40H3E and getting digital audio sound from my TV as well as video, but have no clue on how or where to even start to successfully pairing the two and getting sound.
I own a MacBook Pro (15-inch, Mid 2009) this MacBook model doesnt support an HDMI port. My MacBooks model has the Mini Displayport which supports video out but does not support audio out. Can someone help me by telling me exactly which Mini DisplayPort to HDMI adapter with audio will support my model MacBook Pro (15-inch, Mid 2009) and exactly what HDMI wire do i need to buy that will successfully preform digital audio and sadisfying quality visual through TV?
i have NO expierence with the proccess have NO knowledge about any of this or these Mini DisplayPort to HDMI adapters with audio. i have no idea what kind of adapter and HDMI cord to buy that will give me sound from my tv for my type of macbook. '
im not familar AT ALL with any of this so i hope me giving you my MacBook Pros make and model and my TV's model number will be enough information for someone to help me.
just please give me anything you can on this topic
thank you so much,

With a 2009 MacBook Pro, you need to use two connections to your TV: one for video and another one for audio. The miniDisplayPort on the 2009 models does not support audio, so you need a separate audio cable:
miniDisplayPort adapter for video - I use the Apple miniDisplayport-DVI adapter + a DVI-HDMI cable like this one
audio cable for audio - use a 3.5mm male stereo-to-2xRCA male cable like this one
Connect the miniDisplayport adapter + DVI/HDMI cable to your MacBook Pro's miniDisplayPort output and the HDMI input on your TV
Connect the audio cable to your MacBook Pro's audio out and your TV's audio in
The only potential gotcha is if your Hisense TV requires audio via the HDMI cable when you use an HDMI cable. The H3e user manual is unclear about this.

MiniDP to HDMI with audio for Imac bought in february

Hi
I want to know if there is any way I can output videos using HDMI with audio with an Imac bought in februaary 2010? I saw the Moshi cable but apparently it does not support audio for early 2010 macs. Any suggestions or info on this? What could I do?
Thanks.

Hi,
as far as I know there seems to be two versions of that Moshi adapter.
An earlier one without audio and a later one with audio support.
But I don't know how to distinguish one form the other. Maybe the Moshi website can offer some hints.
Since Apple lists the later one in the document plus sells it in their own Store I assume they tested it with the various Mac mentioned in that document.
Regards
Stefan

Hi! I'm from Brazil and I'm having troubles with subtitles. Watching movies from iTunes and Netflix, the subtitles shows yellow, too small and into gray boxes! I'm having this kind of trouble with my iPad also.

Watching movies from iTunes and Netflix, the subtitles shows yellow, too small and into gray boxes! I'm having this kind of trouble with my iPad also.

Solution found.
I am a Vodafone customer and installed the Vodafone app which asks you to turn off wifi connection on installation as it needs to communicate with their servers over 3G.
After restoring the iPad via iTunes this is the only app that I did nor re-install and seems to be too much of coincidence that while in full screen view watching films my wifi is switched off and 3G data connection is established 10 - 15 minutes into a fiilm and my data allowance gets eaten up!
I would also get push notifications from Vodafone saying "my daily data usage was almost used" with this app installed.
Have tested and on 3rd time watching sky go still wifi is on after 30 mins.
DO NOT INSTALL VODAFONE APP FROM THE APP STORE.

Trouble with audio for ipod movies

Similar Messages

Maybe you are looking for