Trouble with audio on video convesion

I have an ipod nano and am having trouble converting a limewire download to play on my ipod.
When I convert picture is fine but has no sound.
Could someone suggest how I can correct this problem?
Malleefire

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(35578)

Similar Messages

Still having trouble with audio on Macbook Pro

I had posted a discussion board earlier on this issue. I've been having trouble with audio for certain videos on youtube and basically any website embedded with a video. The audio works for a few seconds that doesn't or it doesn't work at all. My volume is up, not on mute, and the one on the video isn't on mute either. It's funny because I just tried watching a video on Firefox (as opposed to Safari) and it works. Could it possible be something with the settings for safari?

Try restarting your Mac, resetting your router, and resetting your modem. My cable internet has gotten slow at times as well, and when I reset my router everything cleared up.

Trouble with audio driver HPG60-243CL

Hello.
A few days ago, I needed to format my notebook (model G60-243CL) and I did everything just like I'm used to do. I reinstaled Windows 7 and after instaling the drivers downloaded from HP drivers page, I had to restart the computer. That's when my troubles began.
Sometimes, when starting up, everything goes on properly until the Windows loading screen, when my computer suddenly restarts again. It doesn't happen everytime and it seems a bit random to me. However, I noticed that when it finally turns on after restarting several times, the audio is a bit odd in every application that involves audio like musics players, videos and games.
On the rare occasions where my notebook manages to start up properly, the audio stays normal.
I already tried formating again, reinstaling the audio drivers and codecs, but nothing seems to work. Does anybody have any suggestions?

Uncle_Sam wrote: I wrote a simple Java application to record audio ..
There is no simple way to record sound in Java, AFAIU.
Uncle_Sam wrote: ...on some mixer and then play it back. ...
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audio when a microphone is connected? If it is, how?
Significant question. Are you interested in getting this code to work for the machine you sit in front of, or is this for 'the general end user'?
I have no general solution for the latter, but for a single machine, installing an 'audio loop-back' (either software or hardware) might be the answer. That is the most intelligent thing I can offer that might help get around this problem.
(Note, also posted as ) [Trouble with audio devices|http://groups.google.com.au/group/comp.lang.java.programmer/browse_frm/thread/9983c6cd3e8204fd/e40278adaa2854cf] on usenet newsgroup comp.lang.java.programmer, and no, I personally do not consider that to be either a cross-post or multi-post (if anyone is interested in my opinion!).

Trouble With Audio Coming Out of Sync

I am having trouble with audio sync
I am using .mov files of myself talking however I also record audio of myself talking as well. The audio files record as mp3 however I convert them to aiff files in order to better synch them in FCP
I have an audio sound as an in point in order to better sync them and the syncing is perfect when i start.
My files are about an hour and a half long and 20 minutes or so the audio starts to come out of sync and my mouth becomes a half second or so behind the audio. I record this audio live so there is no delay between my speaking and my recording voice but the longer the video goes the more out of sync I become.
My syncing method that I use is "Merge Clips" at the in points.
Has anyone else experienced this?

All sorts of things you can do.
Easiest fix is just to run down your timeline and every few minutes snip the audio and move it back into sync.
Now after that;""
Qe have no idea what your process was. We assume you're editing in Final Cut. How did you import your footage? What format is it in the browser?
what are the settings of your timeline? Look at the sequence settings.
You know that you can plug audio from
mic into a Zi8?
You need to get rid of the mixer hum. Likely ac electrical
interference , a ground fault, but who knows.

Trouble with audio devices

I wrote a simple Java application to record audio on some mixer and then play it back. With my headphones / microphone connected, I got the following list of mixers:
1. Primary Sound Driver : Direct Audio Device: DirectSound Playback
2. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Playback
3. SoundMAX HD Audio : Direct Audio Device: DirectSound Playback
4. Primary Sound Capture Driver : Direct Audio Device: DirectSound Capture
5. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Capture
6. SoundMAX HD Audio : Direct Audio Device: DirectSound Capture
7. Java Sound Audio Engine : Software mixer and synthesizer
8. Port Microsoft LifeChat LX-3000 : Port Mixer
9. Port SoundMAX HD Audio : Port Mixer
Of these, mixers 2, 5 and 8 are not available when the headphones are detached, as expected.
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audiio when a microphone is connected? If it is, how?

Uncle_Sam wrote: I wrote a simple Java application to record audio ..
There is no simple way to record sound in Java, AFAIU.
Uncle_Sam wrote: ...on some mixer and then play it back. ...
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audio when a microphone is connected? If it is, how?
Significant question. Are you interested in getting this code to work for the machine you sit in front of, or is this for 'the general end user'?
I have no general solution for the latter, but for a single machine, installing an 'audio loop-back' (either software or hardware) might be the answer. That is the most intelligent thing I can offer that might help get around this problem.
(Note, also posted as ) [Trouble with audio devices|http://groups.google.com.au/group/comp.lang.java.programmer/browse_frm/thread/9983c6cd3e8204fd/e40278adaa2854cf] on usenet newsgroup comp.lang.java.programmer, and no, I personally do not consider that to be either a cross-post or multi-post (if anyone is interested in my opinion!).

Help! trouble with audio configuration

Ok, so here's my story. I got a virus that supposidly was only suppose to screw up with my msn. I did a system restore, but after that, I was no longer able to open up my iTunes. It said i had an error(-200), whatever that was. So then I removed my iTunes, and reInstalled it. But I still can't open it and now it says iTunes has detected a problem with my audio configuration. So I went to my control pannel and into my audio devices and all it really is is adjusting volumes and speakers and mics, and I don't know how to fix my iTunes problem. I just want my music back! Please help!
-Jessica

you've actually got the same error here as you had before. the -200 error displays as an "audio configuration" message in itunes 7.0.2.16.
they are typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.) so let's try swapping out your QuickTime.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Please help with audio and video not syncing.

I'm using Encore 3, and have already authored a DVD a month ago without a glitch. The following are the same steps I used, but this time around, the video and audio in Encore are not syncing.
Here's what I've done.
1) I export my Final Cut projects to .mov using the following settings (Share > Master File).
Format: Video and Audio
Video codec: H.264
Resolution: 1920x1080
Audio file format: Quicktime Movie (AAC)
Include chapter markers: Unchecked
Roles as: Quicktime Movie
2) I run the .mov file in Compressor using the "Disc Burning" preset.
3) I then import the .ac3 and .m2v files that Compressor created into Encore.
4) In Encore, I select both files and go to New > Timeline.
In the Timeline window, the durations on both are the same. But I don't understand why the audio and video are not synced when I preview or when I burn a test DVD. The audio comes in just a tad late.
Video Clip:
Source In: 00;00;00;00
Duration: 00;02;33;29
In-Point: 00;00;00;00
Out-Point: 00;02;33;29
Audio Clip:
Source In: 00;00;00;00
Duration: 00;02;34;00
In-Point: 00;00;00;00
Out-Point: 00;02;34;00
What's puzzling is that two of the 10 videos I've import to Encore are synced perfectly -- same export settings from FCP, same settings Compressor.
Please help.
Thanks!
Mark

Hi Mark.
Do you have any situations where there is more than one video file in a timeline?
Secondly - why are you using H264 HD files for a DVD? This is using lossy compression to make the H264, which is in turn then scaled & even further bitrate reduced for M2V.
I would give it a try rendering an SD video file for use in Encore - not the H264 - and starting out with Dolby Digital or LPCM audio, not AAC.
As with all DVD authoring programs, Encore works best with DVD compliant assets - which you are most definitely using - but I still think you are over-complicating things by using H264/AAC at all.
Eliminating this may help.

Error -8 message (can't connect with audio or video, text OK)

I've tried to exhaust all the resources online, but so far have had little success.
I'm getting an Error -8 message whenever I try to establish a video (or audio) chat with any of the three Apple test accounts. I've opened the ports recommended by:
http://portforward.com/english/routers/port_forwarding/Netopia/3347NWG/iChat.htm
I'm actually trying to get my father-in-law's account up and running so the only details I have about the ISP is that it's Bluewin based in Switzerland so I'm not sure about VoIP details. I could probably find out if necessary. Also, I've already switched to port 443 to log on.
Here's sort of a funny little detail. I've also brought my 12-inch PowerBook G4 with me which I know works back in the states. I get almost the same error as the iMac, but with more details. The only difference is that the iMac doesn't have any details in the following categories:
Video Conference Report:
Video Conference Support Report:
Video Conference User Report:
I think I've covered all the bases. Any and all help would be greatly appreciated. The details of the error log are listed below (BTW, changed account info to "********" for security).
Thanks, in advance,
Scott
//ERR0R REPORT DETAILS///////////////////////
Date/Time: 2007-12-29 11:03:20.315 -0500
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
iChat Connection Log:
AVChat started with ID 3832688733.
scbressler723: State change from AVChatNoState to AVChatStateWaiting.
0x5236550: State change from AVChatNoState to AVChatStateInvited.
0x5236550: State change from AVChatStateInvited to AVChatStateConnecting.
scbressler723: State change from AVChatStateWaiting to AVChatStateConnecting.
scbressler723: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
0x5236550: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
Video Conference Error Report:
2.003976 @:0 type=4 (00000000/36)
[VCSIP_INVITEERROR]
[19]
2.003878 @SIP/SIP.c:2447 type=4 (900A0015/36)
[SIPConnectIPPort failed]
Video Conference Support Report:
1.503507 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected]:16402 SIP/2.0
Via: SIP/2.0/UDP m.0:5061;branch=z9hG4bK7b92ac6340899c77
Max-Forwards: 70
To: "u0" <sip:[email protected]:16402>
From: "********3" <sip:[email protected]>;tag=345579911
Call-ID: 88add57e-b627-11dc-8150-f5008efb13c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]:5061>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 538
v=0
o=Scott 0 0 IN IP4 m.0
s=scbressler723
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:70:1:1499
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-778271315
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:1838791129
0.503244 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected]:16402 SIP/2.0
Via: SIP/2.0/UDP m.0:5061;branch=z9hG4bK7b92ac6340899c77
Max-Forwards: 70
To: "u0" <sip:[email protected]:16402>
From: "********3" <sip:[email protected]>;tag=345579911
Call-ID: 88add57e-b627-11dc-8150-f5008efb13c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]:5061>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 538
v=0
o=Scott 0 0 IN IP4 m.0
s=********3
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:70:1:1499
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-778271315
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:1838791129
0.002969 @SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected]:16402 SIP/2.0
Via: SIP/2.0/UDP m.0:5061;branch=z9hG4bK7b92ac6340899c77
Max-Forwards: 70
To: "u0" <sip:[email protected]:16402>
From: "********3" <sip:[email protected]>;tag=345579911
Call-ID: 88add57e-b627-11dc-8150-f5008efb13c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]:5061>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 538
v=0
o=Scott 0 0 IN IP4 m.0
s=********3
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:70:1:1499
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:-778271315
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:1838791129
0.000000 @:0 type=2 (00000000/36)
[VCVIDEO_OUTGOINGATTEMPT]
[4]
Video Conference User Report:

Hi Ralph,
Well, the Leopard update is installed (10.5.1) and still no luck with iChat 4.0. Still using UPnP through the Netopia 3347NWG, not port forwarding. I have to admit I'm still a little clumsy finding my way through the new OS, but I've done the adjustments to the Mac firewall and I'm sure I have a little more "homework" to do. Unfornately, I'm leaving for home tomorrow, so I thought I'd a least give you an update.
The new error message is as follows. Any additional troubleshooting will have to be done over the phone with my father-in-law at this point.
Happy New Year, BTW.
Patiently awaiting your thoughts.
Scott
///ERROR LOG////////
Date/Time: 2008-01-03 22:24:50.968 +0100
OS Version: 10.5.1 (Build 9B18)
Report Version: 4
iChat Connection Log:
2008-01-03 22:24:15 +0100: AVChat started with ID 1452569723.
2008-01-03 22:24:15 +0100: xxxxxxx11: State change from AVChatNoState to AVChatStateWaiting.
2008-01-03 22:24:15 +0100: 0x17b761f0: State change from AVChatNoState to AVChatStateInvited.
2008-01-03 22:24:23 +0100: 0x17b761f0: State change from AVChatStateInvited to AVChatStateConnecting.
2008-01-03 22:24:23 +0100: xxxxxxx11: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-01-03 22:24:30 +0100: 0x17b761f0: State change from AVChatStateConnecting to AVChatStateEnded.
2008-01-03 22:24:30 +0100: 0x17b761f0: Error -7 (0x17b761f0 cancelled the connection.)
2008-01-03 22:24:30 +0100: xxxxxxx11: State change from AVChatStateConnecting to AVChatStateEnded.
2008-01-03 22:24:30 +0100: xxxxxxx11: Error -7 (0x17b761f0 cancelled the connection.)
Video Conference Error Report:
14.843838 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
12.843724 @SIP/Transport.c:2353 type=1 (00000000/0)
[INVITE sip:user@rip:5061 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK17d757ea4955bfc6
Max-Forwards: 70
To: "u0" <sip:user@rip:5061>
From: "0" <sip:user@lip:16402>;tag=458859319
Call-ID: 43d4b782-ba42-11dc-b17a-ca8b75d14012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 729
v=0
o=xxxxxxx 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2400
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:531389619
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:254359157
13.344072 @SIP/Transport.c:2353 type=1 (00000000/0)
[INVITE sip:user@rip:5061 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK17d757ea4955bfc6
Max-Forwards: 70
To: "u0" <sip:user@rip:5061>
From: "0" <sip:user@lip:16402>;tag=458859319
Call-ID: 43d4b782-ba42-11dc-b17a-ca8b75d14012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 729
v=0
o=xxxxxxx 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2400
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:531389619
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:254359157
14.344611 @SIP/Transport.c:2353 type=1 (00000000/0)
[INVITE sip:user@rip:5061 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK17d757ea4955bfc6
Max-Forwards: 70
To: "u0" <sip:user@rip:5061>
From: "0" <sip:user@lip:16402>;tag=458859319
Call-ID: 43d4b782-ba42-11dc-b17a-ca8b75d14012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 729
v=0
o=xxxxxxx 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2400
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:531389619
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:254359157
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
6.186925 @Video Conference/VideoConferenceMultiController.m:1476 type=5 (00000000/0)
[IP And Port Data With Caller IP And Port Data: Obtained 80 bytes of local IP and port data (2 entries). Remote data was 0 bytes (0 entries).
7.804314 @Video Conference/VideoConferenceMultiController.m:1509 type=5 (00000000/0)
[Initiate Conference To User Cert Version: u0 with 120 bytes of connection data.
[]

Trouble with audio for ipod movies

Hey
I recently converted a few videos to my ipod where they all successfully went on. However, when I play them the audio does not appear to be there and you cannot hear anything. Eventhough the volume is at its highest and listening to music s perfect.
Can anyone help me with this?
Thanx

iTunes and Quicktime (and Quicktime Pro, as well) don't convert multiplexed video files well for iPods; it ends up that the video files don't play sound in the file on an iPod.
(iTunes saves the audio and video parts of the file on the same track, as opposed to a different parts of the video file; this doesn't work for iPods when they plays videos coverted in this way)
In this case, you'll need to try using a third-party program in order to properly convert the videos for your iPod.
Try MPEG Sreamclip for a good converting program (it's compatible for both Mac and Windows, by the way).
Be sure to convert it to a MPEG-4 file type, of course, and the audio should work out okay.
-Kylene

Trouble with audio channels

Hi. I'm having a bit of trouble with creating audio tracks. Say if I create a few audio tracks, I'll put a loop on one of the tracks and the signal goes through to the next track down and plays the loop on two tracks instead of one. anyone know why this is happening?

I've never encountered this so I can't really say. I can't imagine that you're running out of Audio objects as they are 256 Audio objects available in Logic. So if you've used 256 Audio objects already Logic can't create new Audio objects and will assign each new track to the same object. But I don't see this being the problem in your case.
Anyway check the track configuration by control+clicking/right clicking onto the track headers and checking to which Audio objects the new tracks are actually assigned.

Having trouble with audio edit to tape, print to video ok

Hi all, please go easy on me, this is my first post.
I am having difficulty getting audio on to tape via 'edit to tape'.
The hardware is blackmagic decklink extreme, feeding component video and analoge audio to a UVW-1800P.
I can do a print to video on a crash record and the audio works that way, but edit to tape does not.
I have tried both deck link and built in audio in the audio settings and the FCP a/v settings, seperate and ganged output settings, I have set the insert settings to 2 channel Sony, reloaded the decklink drivers.
The irritating thing is the audio is there whilst cutting, but as soon as I try edit to tape there is complete silence. The important thing is that it worked a few weeks back but does not now, it must be a setting?
Thanks in advance for your help.
This machine I am working with this week is an Intel MacPro running FCP 5.1.2 and Mac OS 10.4.8
G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade Mac OS X (10.4.8)
G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade Mac OS X (10.4.8)

I had this same problem and this resolved it for me:
-Go to your "Settings" icon and click on the "General" tab.
-About 2/3 way down the page you will see "Use side switch to:" - make sure "mute" is checked rather than "lock rotation."
-Then make sure the side switch, located next to the volume toggle switch on the side of your ipad, is moved to the right (no red dot showing).
My audio worked fine in embedded videos after I did those two things. Hope it works for you.

Trouble with audio when converting MPEG to iPOD Video

I am following the Quick Time Pro instructions for exporting my mpegs to iPOD video format, but when I do not get any sound. I am using Kazaa to download my mpegs. Is that the issues? I don't want to pay for videos on iTunes already formated for my 5G iPod. Can you help

QT Pro does not handle "muxed" formats (MPEG1, MPEG2, VOB, some AVI, AVI MJPEG, etc.). Use an MPEG based third party application like Videora Converter.
2.0GHZ G5/533MHz G4 DeskTop/400MHz G4 PB Mac OS X (10.4.3)

Having trouble with Audio Sync in FCExpress

Hello, everyone...a question for the board.
I recently acquired a new iMac with Final Cut Express...planning to try some video editing at home.
I haven't been successful with the proper configuration for captured video, however...using a Sony TRV-900 as my source, video feeding in via firewire 800 (I bought a 400/800 adapter to make it work), and ingesting using NTSC Basic...however, my audio is still not in sync with the video--the video is always ahead, and it jumps further ahead the more I ingest.
Is there some configuration I need to use so that the audio syncs correctly? Is it, as I suspect, a drop-frame issue that I haven't set up correctly?
Any help you could throw my way would be very much appreciated.

I realize that most DV cameras will record in 32 and 48 sampling rates. What I'm trying to get you to do is see what you've ALREADY recorded.
Open one of the captured clips in QuickTime, then hit Command j to see the movie properties. Or in FCP, right-click on a captured clip and choose Item Properties to see what audio you are trying to capture. Once you know that, create a Sequence with those settings, then capture any remaining footage with those settings. If needed, recapture any footage that was previously captured using the wrong settings.
-DH

Troubles with audio on export

Hi.
I have a Motion 5 project with video with a soundtrack, and some sound effects and music. On render/share it skips the sound effect (a white noise static sound) and approx. 2 seconds of the video soundtrack. Then sound plays fine for the rest of the video clip. After that there is a music track, and it doesn't play the first few seconds, but plays the rest flawlessly until the end.
This is on an 8 Core Mac Pro 2,1 with 12 GB of RAM running Motion 5.0.2. and OS 10.7.3
What's then super strange is that when I took the file home and rendered on my Quad Core Mac Pro 2,1 with 16 GB of Ram an the same OS and same version of Motion, it rendered without a hitch.
Any ideas?

Hello Imgoinghome,
I understand that you are having some problems with your audio.
Please post your product and model number.
You can find this information by holding the FN key and pressing the ESC key.

Imported dvd into premiere pro 2014 as a linked file with audio and video but audio from previous editing file is playing with video

I am editing in premiere pro 2014 on a windows 8.1 system with 12 mega byes of ram. I imported a dvd into premiere from a .f4v that was
burned using freemakevideo converter.
I imported the DVD into premiere and the audio that is playing is from an previous project I edited with the program, as oppose
to, the audio that is linked with the video imported.
Do you know why this is? I cleaned my media cache and I rebooted my machine.
Please help

Without knowing the specs of your videos it is hard to say. I'm also running a Mac and am having no such issues.
My first thought is that you have something from a 3rd party installed that is causing conflicts. If all else fails try transcoding your mp4 files to a frame based codec using the Adobe Media Encoder. Pick one of the Apple production codecs or Jpeg compressed QuickTime.
Are you running a ram preview? Did you render your Premiere timeline? Are you new to AE?

Trouble with audio on video convesion

Similar Messages

Maybe you are looking for