Trouble with backup after reinstalling XP Pro

OK, here we go. I had to reinstall XP due to serious errors. I have backed up my iTunes library to 6 DVD's as suggested by Apple. The music files were both on my C drive and H drive on a second computer (network share). After backing up for one whole day, I reinstalled XP Pro and iTunes 7.5. When trying to reinstall the backup up iTunes music, 1 of the 6 DVD's is not recognized by iTunes. No error messages, it just sits in the drive and iTunes seems to freeze. That's approximately 550 songs I'm missing. Both bought at the Itunes Store as ripped CD's. Moreover, I noticed that exclamation marks were visible after restoring a 2nd backup DVD. I guess that is caused by the fact I changed the music files location to the C: drive instead of the network share H. I was not able to consolidate all music files to 1 location due to the XP problems I had. Luckily, I still got all my music on my iPod, and also have a second backup of all my documents from my C: and H: drive on an external HD. I there a way to restore all my library and files from my iPod or the second backup I made? Please give me your suggestions so I can have a nice Christmas with my music! Thanks in advance.

herman1966 wrote:
OK, here we go. I had to reinstall XP due to serious errors. I have backed up my iTunes library to 6 DVD's as suggested by Apple. The music files were both on my C drive and H drive on a second computer (network share). After backing up for one whole day, I reinstalled XP Pro and iTunes 7.5. When trying to reinstall the backup up iTunes music, 1 of the 6 DVD's is not recognized by iTunes. No error messages, it just sits in the drive and iTunes seems to freeze. That's approximately 550 songs I'm missing. Both bought at the Itunes Store as ripped CD's. Moreover, I noticed that exclamation marks were visible after restoring a 2nd backup DVD. I guess that is caused by the fact I changed the music files location to the C: drive instead of the network share H. I was not able to consolidate all music files to 1 location due to the XP problems I had. Luckily, I still got all my music on my iPod, and also have a second backup of all my documents from my C: and H: drive on an external HD. I there a way to restore all my library and files from my iPod or the second backup I made? Please give me your suggestions so I can have a nice Christmas with my music! Thanks in advance.
A few quick comments/questions, etc:
1. Now that you have reinstalled Wihdows XP is the Windows Updates up-to-date?
2. Have you authorized the computer?
3. Have you logged in with you iTunes username and password?
4. Sure you can use your iPod: http://discussions.apple.com/thread.jspa?threadID=1291709 (great suggestions here)
5. http://docs.info.apple.com/article.html?artnum=300173 (official iTunes help)
Message was edited by: mmu1253397

Similar Messages

Trouble with safari after updating SL 10.6.8

I updated my OS last night to 10.6.8 and today, in Safari I find that I cannot view amazon.com When I open a page, much of it is blank. Anyone else having trouble with amazon after updating to 10.6.8?
michelle

(This is a copy of my post in this thread.)
I updated to 10.6.8 too, was suddenly unable to print to my before perfectly working printer (an HP Color LaserJet CP1515n hooked up to an AirPort Express), and started scouring the web for solutions. The more I tried, the more disappointed and frustrated I became. Then I came here, read about a possible solution in this very thread (the disk image 'Repair10.6.8.dmg') and became hopeful again.
But alas...
Sadly, this isn't working for me at all. I ran the script that supposedly fixes the print problems introduced in 10.6.8, but the print jobs still all pause the printer and fail with a 'broken pipe' error. It has nothing to do with the USB cable, as I can print just fine with the printer directly hooked up to my Mac wit that very same cable. I reinstalled the drivers, updated my printer's firmware, ran the repair script twice just to be sure, reset the printing system, even deleted all preference files with 'hp' in the name and having to do with printing, restarted my Mac. All with no result.
Man, this is so frustrating! Anybody with any other suggestions or possible solutions?

Anyone have trouble with IPad3 after installing OS6.1.3? keeps crashing

Anyone having trouble with iPad3 after installing OS6.1.3? Mine keeps crashing.

Mine seems to be just fine.
Try a reset,
Reset your iPad by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPad will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back.

Trouble with wifi after IOS 6 upgrade

I have an iPhone 4 and successfully installed iOS 6 today. I am having trouble getting on my home wifi. When asked to join my network, I click on it and type in my password. Shortly after typing in my correct password an apple.com login page loads from the bottom of the iPhone but says "hmm, the page you're looking for cant be found". The only option I have is to push cancel and then it ends my wifi connection with my own home network. Help please.

burhansheikh replied to Trouble with wifi after IOS 6 upgrade
"guys i have 100% solution copy Wi-FI address from about(general)(setting) & paste to Client ID in your network (Wi-FI) (setting)"
in Using iPhone • 8 replies
1

Has anyone had trouble with SIRI after new software?

Having trouble with SIRI after the new software download. any Ideas?

Basics from the manual are reset, restart, restore. Have these been attempted?

Trouble with flickering after converting AVCHD files to Apple Pro Res 22

Hi guys.
I have figured out that Apple Pro res 22 is the best format for my AVCHD files.
But I am having trouble with the files after converting them to this format.
Every 60 frames I have a blurred frame.
This results in a flickering effect when watching the clip.
The original MP4 clip (AVCHD) plays fine on the Mac but when I convert is it flickers.
I have captured a still shot of the frame here
http://www.willpower.net.au/DOWNLOADS/FrameError.jpeg
Here are the settings I am using for the conversion
http://www.willpower.net.au/DOWNLOADS/Error.JPG
Here is the converted file in Apple Pro Res 22 format with the flickering
http://www.willpower.net.au/DOWNLOADS/SANY0007.mov
I'd appreciate any help that you can offer.

Actually I think I might have found the answer.
After diggin deaper into the camera manual I have discovered that the setting I had it on "Full HD" actually is interlaced not progressive. Even though tha badging on the camera says Progressive"
So I think something got lost when converting the files to apple pro res.
I just shot a 10 sec clip on "Full HR" which is the progressive function and it converted nicely.
I'll come back to this post after shooting and making a little test movie today.
Thanks for your help.
PS. I wonder what codec it actually shoots in. Apparently it is not AVCHD but MPEG-4 AVC/H.264 compression (I thought that was AVCHD)

Trouble with iLife after OS X reinstall

I am having a hard time understanding what I am doing wrong.
Last week my system would shut down on restart. I did all I could to get it to work but it would only start in safe mode. After some phone assistance from SOS-Apple. I reinstalled Tiger. I saved my previous applications to the "Prior system" folder and the reinstall helped. I then attempted to merge all my applications back to the new OS but it seems I did something wrong. The iLife applications would not work properly. No iPhoto, iWeb, iDVD, Garageband, nothing!
I kept getting the following message "To restore the missing files, use the iLife installer to reinstall iLife". It did this over and over even after trying to reinstall. Nothing! I uninstalled all the iLife applications, restarted the system, reinstalled and STILL nothing.
Does anyone have any ideas?

Welcome to the Apple Discussions. Before trying to reinstall the iLife applications check in the HD/Library/Receipts folder for any receipts for any of the iLife applications and delete them. Also check in the User/Library/Preferences folder for any iLife application preferences. They would take the form com.apple.iPhoto.plist. If there are any delete them along with the iLife applications and then try again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Macbook Pro Retina trouble with projector after using Thunderbolt display

I used my macbook Pro Retina with my Thunderbolt to VGA adapter all through the fall, and never had any trouble with it. Just before Christmas I got a Thunderbolt display.
Since that time, whenever I connect the projector, I get a black screen. I can see and move the mouse, but nothing else. Other computers still work with the projector.
I'm not certain if the Thunderbolt Display has anything to do with this or not, but it's just the timing that it happened.
Grateful for anyone that can offer help!

It might be that the Thunderbolt output is set to the resolution of the Thunderbolt display, which the VGA adapter probably cannot display correctly. You can toggle between the video display modes using Command-F1... This will toggle the output between Mirroring and Extended Desktop. Using Command-F2 will allow you to attempt to detect displays. It might auto reset to the correct resolution using Command-F2. If you can get the VGA out to display using extending desktop then you can change the resolution to work properly with the VGA projector.

Resore From Time Machine Backup after Reinstall OS X (Maverick)

Hi all
I have a MacBook pro mid 2010, after reinstalled OS X(maverick) from command + R (disk utility), I try to Restore from TIme Machine Backup, and then after 2 hours, the computer turn off and now I try to turning it on, but only last 5 seconds on and then turn off by it self.
Then I try to Reintall OS X(Maverick) again, and it work fine, I can turn the mac on, navigate to all windows, use the internet, I can turn it off and then turn it on, not problem. Then I need to restore from time machine again so I can get all my data from my last backup. I turned off the mac, then turn it on hold command+R then go to Disk utility Restore From TIme Machine Backup, wait for 2 hours, and again the computer turn off. I try to turn it on but only last 5 second on and then turn it off by it self.
I need help please.
thanks

Do you know which OS version it had originally and which version was on it before the seller wiped it?
That's important because, unless he did the right thing, his Apple ID and password may still be associated with it. You can easily fix that by booting into Internet Recovery (hold down Command + Option + R keys), choose to erase the drive using Disk Utility, and then reinstall the OS. That should resinstall the original OS version (if Lion or later) and then you can upgrade using your own Apple ID.
I'd recommend doing it that way to avoid any possible problems since we don't know what the seller did or didn't do.

Trouble with printing tone from Efex Pro to printer from Lightroom

I am having big trouble with a photo that was toned in Silver Efex Pro 2. When I print, the tone is not there. I have done the same kind of toning before, but never had this problem. I even tried printing a photo that had a lot of tone... not there when I print. I am pretty sure I have all the setting correct. Printing with Epson 2880, Epson Hot Press Bright, Profile for HPB, etc.
After 6 hours (really) with Epson and Adobe, the problem is not solved.
Help!
Laure

Hi bannyx,
I hate to hear you are having issues. Does the printer have a valid IP address when connected via Ethernet or wirelessly? Click Here for steps to take related to this issue. Please see the below information regarding the connection types for this printer. Also I need a bit more information to proceed if the above link does not resolve the issue.
Needed information:
1. Has the installation been completed from a disk or download?
2. Did the installation software detect the networked printer?
2. What is the IP of the printer when connected with Ethernet cable?
3. Are you able to access the embedded web server for the printer (type IP into address bar of web browser, does printer web page pull)?
4. Do you have security software running on the computer?
5. Is the router running in mixed mode?
Connection information:
1. Ethernet and wireless connectivity are exclusive. If the device is hard wired with an Ethernet cable, wireless communication is voided (radio disabled) because the printer is networked with a cable.
2. Disconnecting the USB cable puts the driver in an offline state due to the fact it cannot communicate with the printer. This is normal; it basically informs the user the device is not communicating.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Can I selectively copy files from TM backup after reinstalling OS from dvd?

Hi everyone,
I have searched both this forum and the web, and have not been able to find an answer.
I have two separate questions. First, I have a 2TB external with a 1.5 TB partition for TM, and 500GB for my Aperture library and iTunes videos. I have TM set so it will back up the second partition on the same drive, as well as the internal HDD of my MBP and another external drive to the TM partition. This won't cause any problems when restoring will it? I don't have another hard drive right now to make another backup of the libraries, because my last one crashed.
I'm planning on doing a reinstall of OSX from the dvds, (Apple's advice) and I was wondering if it's possible to selectively copy things from the TM backup? For example, I would copy the applications over automatically, but I'd want to pick and choose which of the other files to copy back.
I want to be able to eventually get everything back the way it was with no problems, but I don't want to bring something back that was causing my original problems that caused me to reinstall OSX.
If necessary, even starting out new, provided I could copy everything back again piecemeal, would be fine. I just want to get these problems to stop!
Thanks!

Thanks for your reply. I think that my problems are hardware related, but Apple wants me to try to re-install from scratch.
What would I miss that's in the Library folder? The only thing I can think of that'd be hard to get back would be emails from Mail, as I think they are stored in there. However, I excluded one of my email address folders anyway, since it was 4 gigs, and it's a Gmail account anyway.
I just want to make sure that I wouldn't lose anything important.
Also, when I plug in the TM drive after reinstalling from scratch, it won't try to overwrite my backups with a new, almost blank one will it? I'm assuming no, but I want to cover all my bases, as I'm not that familiar with TM.
Thanks for your help!

Plug-ins unavailable after reinstalling Logic Pro 7.2 upgrade

I have been running Logic Pro 7.2 which was purchased as an upgrade from Logic Gold with an Emagic XS key. Everything had been running fine until recently when I had to reformat my startup partition and reinstall everything.
Reinstalling Logic Gold seemed to be straight forward. It booted up as normal with all Logic and third party plug-ins appearing in their drop down folders when selecting a plug in.
I then proceeded to reinstall Logic Pro 7.2 upgrade only to find that all of Logic's AU plug-ins and third party plug-ins were no longer available to me within Logic Pro 7.2...?
I'm absolutely puzzled by this. Can any anyone help me?

Hey Sparco.
I was wondering the same thing, as I've recently done this as well (bought LP after owning LE, that is). I was always wondering whether or not I needed it there, or even GB for that matter. I almost deleted LE/GB, until I realized that the programs themselves aren't taking up that much space. What takes up the most space are the sample libraries, apple loops (at least the non-midi ones), and perhaps some of the plugins. As far as I can tell, Logic Pro will install as a separate app, but it will share all of the file resources with LE and GB, and just add extra stuff on top (like the ES2, Scultpure, etc etc). I don't think you'd be saving all that much space getting rid of LE.
Besides, having LE around means that you don't ALWAYS need the xskey. Perfect for anyone running a laptop.

Trouble with 10g after Installing Grid Control

Main problem: after installing Grid Control and rebooting, I can no longer access my databases.
I have 10g installed on a fairly decent Windows XP machine. It was running okay, but I had two Oracle database instance processes running at 200mb of RAM each (of a total of 1 GB of RAM), so it was a bit bogged down, as is to be expected when running Oracle as a server on Windows.
I then installed Grid Control, which seemed to go okay, and another database as well. But once the install completed, and I gained access to the Grid Control version of the OEM for the first time, that's when things got wacky. Connecting to any OEM instance started taking anywhere from 2-10 minutes, everything was bogged down considerably, etc. I tried shutting everything down and rebooting, but now things are worse. OEM is timing out and not finding servers, listener is timing out, etc. I've tried manipulating a few things in Net Manager (I noticed that my LISTENER section didn't seem to contain any data at all, and my databases weren't listed in there either) with no result.
I've also had trouble with "host credentials" and being able to administer the databases within the OEM, even after implementing a fix I had found to add my user name to a "log on as batch job" local security policy.
Finally, I noticed that after installing Grid Control, when I run "sqlplus", I now see "Oracle91 Enterprise Edition" instead of the "Oracle10g" it used to show (and I never had anything but 10g installed on this machine!).
Here's what happens when I try to access my dBs:
-When I try to launch the OEM connected to any of the 3 databases I created (which were previsouly running), the browser just times out with "page cannot be displayed".
-When I run "emctl start <ANYTHING>" I get file/path not found errors, and a file path with both forward and backward slashes (starting after the "agent" directory):
C:\oracle\product\10.1.0\agent/<...etc.>
-When I try to test a connection to a service in Net Manager, I get this error:
ORA-12557: TNS:protocol adapter not loadable
I had to manually add my listener info and databases info(under Service Naming) in Net Manager, but everything appeared fine in Oracle Directory Manager (unfortunately, that doesn't help much, since this is just a general info tool).
I am nothing near a DBA and my knowledge is limited, so I apologize for not being more consise, but I'd be glad to elaborate if someone could tell me what they need to know.
Thank you,
John

Yes; thank you both. Although I had 1 GB physical and 1.5 GB virtual memory configured, running Grid Control seemed to completely kill all available resources.
I have removed GC and its related database and applications, and I can again conncet to my databases via Database Control. Thank you.
By the way, another issue has arisen, seemingly in the aftermath of installing GC: my OEM Database Control instances now time out after about 60 seconds, logging me out each and every time. I have cookies enabled, but this doesn't seem to be the trouble. Is there a Web setting somewhere that will kick users out of the instance at timed intervals?

Trouble with activation after upgrading to iOS 7.0

This is ridiculous. Still having trouble with activating my phone after upgrading to iOS 7.0. How does Apple expect us to make / receive phone calls???

It may take a while becuse millions of people are doing it at the same time. Patience young grasshopper. Try restarting the phone and then try activating again. It took mine a good long time before the activation completed successfully

Trouble with iPhoto after latest update for compatibility with RAW-files

Hi all, I'm having serious trouble with iPhoto since the latest update for compatibility with RAW-files for digital fotocamera's (version 2.4).
After connection with the camera iphoto starts up as usual and i can start importing my pictures. So far all goes well. After having imported my pictures (visual with thumbs and so one) and having created an event iPhoto isn't able to show any pictures. Stopping and restarting Iphoto gives a message that there are a number of photo's available that havent been imported yet (!!???). I can choose to import or ignore. Whatever i choose i'm not capable of visualising the photo's.
Anyone with a similar problem and the solution? Can i remove the update?
I've tried several camera's all with the same problem.
thx for any replies
niki001

Hi Terence, thanks for the reply (i'll wait with the downgrade for now ;-p).
I made a small step by step report of my findings:
1. Attach camera to imac
2. iPhoto starts up with previews of the pictures (so far so good)
3. Give event-name and start import ( so far so good)
4. 'Latest Import'-report all fine, previews ok, check with event : previews fine. All seems well
5. disconnect camera, stop iPhoto. As far as now all seems normal.
6. Restart iPhoto : Message 'iPhoto Library contains photo's which havent been imported. Import Y/N?'.!!!???
7. Option Y : IPhoto imports photo's imported in step 3 in a new event box (shown as a 'black box' on screen). Last made event (step 3) shows up as a black square in overview all events. Double click on event gives empty squares where previews should appear. Double click on photo preview gives large explanationmark on screen.
8. Drag event-box over screen shows thumbs within square, release event returns to 'black box'.
9. Shut down iPhoto.
10. Restart iPhoto jumps back to step 6 as long as i keep answering Y.(Each time creating a new extra 'black box event').
11. When i now look within iPhoto Library i can find a map Import in which i can find back the last imported photo's from step 3.
12. Dragging these pictures to my desktop (preview gives no problem at all) and from there back in to iPhoto simply recreats a new 'black box event'.
13. In step 6 option N gives a message 'creat iphoto Library recovered'. In iPhoto Library map Import has disapeared.
14.When looking into map 'iphoto Library recovered' i can find my originally iported photo's. However same problem as in step 12.
I used aperture (trial version) to see wether the problem could be photo-related, but here al goes well.
So, any idea's???
thx

Trouble with backup after reinstalling XP Pro

Similar Messages

Maybe you are looking for