Trouble with BDK Installation over J2SE 1.4

Hello
I am having trouble with installing Bean Development Kit 1.1.
The BDK 1.1 can't seem to be getting installed on the J2SE 1.4 Java VM. The LaunchAnywhere installer runs and then reports the following error.
"Can't Launch Executable
(Windows error 1157 occured while loading the Java vm)
Try installing the Java VM or change the Java VM used by the application"
Re-downloading <--- no difference ... still the same error
Re-installing <--- hmm ... well tried that ... doesnt work ...
Change the VM <--- then whats the use of the new features of J2SE 1.4 if they cannot be used ...
Some one please help me ... Its kind of urgent ... I have a project submission deadline within a few days :)
Thanks

Go here:
http://java.sun.com/products/jdk/1.2/download.html
Download this JRE, install, then click on the BDK exe, and poof: suddenly BDK installs. I don't know why, but that's what I did, and the BDK installed.
HTH.
Teresa

Similar Messages

Trouble with BDK Installation over J2SE 1.4 Runtime

Hello
I am having trouble with installing Bean Development Kit 1.1.
The BDK 1.1 can't seem to be getting installed on the J2SE 1.4 Java VM. The LaunchAnywhere installer runs and then reports the following error.
"Can't Launch Executable
(Windows error 1157 occured while loading the Java vm)
Try installing the Java VM or change the Java VM used by the application"
Re-downloading <--- no difference ... still the same error
Re-installing <--- hmm ... well tried that ... doesnt work ...
Change the VM <--- then whats the use of the new features of J2SE 1.4 if they cannot be used ...
Some one please help me ... Its kind of urgent ... I have a project submission deadline within a few days :)
Thanks

Go here:
http://java.sun.com/products/jdk/1.2/download.html
Download this JRE, install, then click on the BDK exe, and poof: suddenly BDK installs. I don't know why, but that's what I did, and the BDK installed.
HTH.
Teresa

Any trouble with Mavericks installation?

Any trouble with Mavericks installation?

I too have upgraded four of my Macs to Mavericks and had no problems at all with any of them. One of the flaws of discussion groups is that one gets a skewed idea of the number of problems that users have because it is human nature to complain about something, whilst the majority of users who don't have a problem seldom bother to remark on this fact!
I, like most of the successful upgraders here, always follow a simple routine that involves firstly backing up, then (if upgrading multiple Macs) creating a bootable drive with the updater on, using Disk Utility or similar to repair permissions before upgrading the OS. I never use the Mac when upgrading and close all the programs and disconnect all external drives, save for the one with the updater on.
Following this routine means that I have never had a problem with an update since OS 7.5 on any of my 16 odd Macs. Of course, smugness always comes before a fall...!

Anyone else having trouble with flash player over working the processor since the security update?

Hi everyone-
Since the last security update (flash player version 11.7.700.169) I have been having trouble with flash player beating the daylights out of my processor. My OS is Windows XP. This only happens on some sites, not all. For example netflix and amazon are fine, but acorn and huffington post videos send the processor into overdrive. Anyone have any ideas or suggestions? Thanks in advance :-)

I have XP on some machines, and I do not experience any such problems with 11.7.700.179. If I were, I would try two things
update the graphics drivers; see http://forums.adobe.com/thread/945765
update to the latest Flash Player beta, or wait until the new version is released later this week

I'm having trouble with activation using over drive fore books

II'm having trouble with activation I've tried too many time wit no luck

Reader doesn't need activation. I think you should ask in the Digital Editions forum, Adobe Digital Editions

Trouble with Tiger installation

I bought Glitch, my Powerbook G4 12", used a couple years ago. The dial-up modem has never worked to my knowledge, but that's the only real trouble I've ever had with him... until now.
A friend of mine had his three day old Macbook Pro stolen, along with over half his toyz... Everything light just vanished one day while he was at work; leaving only an old tower, two old school monitors, and a Toshiba notebook that happened to have been kicked under a couch to keep it from being stepped on. Because I was going to take a holiday anyway (I'm a writer, so that just means getting unwired and reconnecting with the real world... not much of a vacation really.) I decided to loan him my setup, which has been proven portable, so he could still be productive with his art until he could absorb the loss. Starving Artists are just strange like that... we'd rather go hungry to replace tools than stop working and just make ends meet as best we can. ...I was between projects and he was just getting something big off the ground, so it makes sense to us.
Anyway. I was going to upgrade Glitch to Leopard later this week anyway, but my friend still has the software package for his missing Macbook Pro, so we decided to attempt to install Tiger just to tinker around with it for a couple days while I'm visiting from out of state. My fiance has Tiger on his Macbook at home, which we're updating next week... he's not a geek like my artist friend and I, but one of those irritatingly impatient end-user types that don't RTFM before calling up an overworked tech irate. So, if I can upgrade Glitch this week and update his notebook next week, I can skip some of the annoying growling when something goes not exactly according to planned.
Like today.
I had some work to do on the hardware when the parts come in (boosting RAM, replacing missing screws and worn out keyboard (so keys stop flying off at anything over 45 WPM... because while that can be very entertaining it is hardly amusing), etc.) but this was supposed to give me something to tech out on to fill a lazy afternoon.
Then I get a message. No driver for "Powerbook 6,1"... so, because the software was bundled with a Macbook Pro it won't install to a Powerbook? The licensing allows for it, so I should just need to find the proper hardware profile, right? And if it just needs a patch, that should be available somewhere on the internet, right?
But I couldn't find anything like that on a cursory glance, and I don't really feel like riffling through the murk when I could be vegging out and watching anime... or otherwise enjoying my temporary reprieve. I figured, it couldn't hurt to throw it out here and see if I couldn't find someone who already knows what I'm getting at, or at least has some ideas I haven't thought of... not that I've thought incredibly hard on this or anything. I just figure I'm missing something obvious, because that's usually the way it goes.
I have tried a few different things, and did manage to rescue the drive intact before anything too screwy happened, but is it just me? Or does this really just not make a whole lot of sense? I had been under the impression that Tiger and Leopard were both backwards compatible for my machine, so why on Earth would Apple make a system recovery/installation CD without the obviously indispensable drivers to support older hardwares? The licensing clearly states that the software bundle in my hands can be used only on an Apple machine, and only one of them at a time (I'm assuming preferably one owned or operated by the primary user of that license)... it does not state, however, that this bundle may only be used on the hardware it was supplied with (in particular) or that it must be used on a Macbook Pro (in general).
In short: ***?
If you have an idea, please, do not hesitate to reply. I'm not sure if this automatically sends email notification... I'm about to look into the settings. If you already know it doesn't, please also send a blip to my email so I know to come back and look for your response.
Kaye
<[email protected]>

Actually, yes. Thank you for the confirmation. Now I know that I'm not crazy (at least on this point), because it actually doesn't make sense. I guess you can see where I was going... the logic is sound, it's the distribution that lacks common sense.
Jeez, it's like dealing with lawyers... I think our whole system is screwed because the people in charge of interpreting and enforcing the law are so completely out of sync with reality. I mean, people who take calculated risks assume liability, right? Shouldn't we be able to assume the system works because it has some foundation in common sense? I'm beginning to think that legal #&%$ (technical and otherwise) if really just there to protect idiots from their own ignorance.
Meh... now I'm all disappointed. That is so lame.
I mean, why? Why not just say that in the license? Are they trying to save on printing costs for those little pamphlets or something? It wouldn't surprise me if it really were because they just couldn't be bothered to swap out the words "on a single Apple-labeled computer" with "on a single __(insert model software is linked to)"... blah blah blah. It would be so easy. The license agreement doesn't even have the actual full name of the edition, just OS X, or a little sticker or something with the specific serial, or anything.... nope, no effort what-so-ever was made to make this paperwork actually useful.
Heh... actually, I guess that's the point my lawyer was trying to make to me a few weeks ago when we got into a growling match over some documents. I'm to smart for my own good sometimes, and speak legalese better than most non-legal education types, so I make their job more difficult than they think it needs to be. I guess most attorneys aren't used to their clients asking informed questions or pointing out inaccuracies in language.... I guess most of them don't expect to represent weirdoes like me in accident cases either. Oh well. I should have just done the groundwork myself and just paid someone to look good in a suit. shrug
I'm so wandering... I'll shut up now.
Thanks again, especially for the prompt response and the email.
Kaye

Trouble with Flash Installation

I am having troubles downloading and installing the latest flash and reader versions. I get the download box after agreeing to the TOS and it goes through the bar and then I get the Initializing Install box and it sits there for a few moments and I get " Installation encountered errors. Actionlist not found." Then it takes me to the troubleshooting page. I have tried both downloaders as well here http://www.adobe.com/products/flashplayer/fp_distribution3.html with the same results. The machine is running XP Pro 32 bit along with IE8. I get the same results when using other browser including Firefox and Silverlight. I'm at wits end and have tried everything I can think of short of a reformat and install. Any suggestions?

I can expand somewhat as you are running a different OS than the computer I was working on. I had to do a repair with the Windows XP disk which got rid of the registry entries for Zeus but was still trying to run. Once I had all of the updates done from microsoft, I reinstalled Malwarebytes from http://www.malwarebytes.org and ran a full scan. That is what detected the Hotbar malware. Just for good measure after that I downloaded and installed CCleaner from http://www.piriform.com/ and checked the prefetch data option and ran both the Cleaner and the Registry options. Both of these programs have free and purchased options. After all of that it finally got both of those out of the system and I was able to download and install Adobe Flash and Reader again. I hope this helps. You might just start with the updates and 2 programs as the computer had other issues with a corrupted registry that caused me to do the repair in the first place.

Trouble with software installation

I tried to uninstall, then reinstall the software, with no success. It still seems to get stuck while "configuring registry". Also, during the install process, my current Palm desktop software was removed and I am unable to sync to my old device, which I desperately need for school. Please HELP!!
Just purchased used Palm tx on ebay; while trying to install software, install "gets stuck" while configuring registry. Any suggestions?
Post relates to: Palm TX
I downloaded the software from this website; my pc's OS is windows XP home, SP2; this software is being installed to replace Palm desktop for Sony Clie
thanks
Message Edited by cbayly on 02-29-2008 09:04 AM
Message Edited by cbayly on 03-02-2008 07:08 PM

Hello and welcome to the Palm Community Forums. Please let us know:
What version of the Palm Desktop you are trying to install, and where you got it (i.e. an original TX installation disc, a copy of an installation disc, or download from this site);
What is your desktop Operating System;
Whether this is an original Palm software installation, or whether you are installing over a previous Palm installation.
I might also suggest that you *Edit* the Message subject with some references to this info (i.e. Windows version, Palm Desktop version) so you will draw some more specific attention from people who might be able to help.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Im having trouble with the installation of the downloaded trial.

Will download and I downloaded the 7z that is necessary one of the two files.
The install won't initiate.
Adobe%20Premiere%20Elements%2013-AkamaiDLM.exe
PremiereElements_13_LS26_win64.7z
We've ordered the Premiere Elements 13 software but wanted to start using the trial until it arrives.

annp
There are the downloads that require 2 files. One file is the .exe (Adobe Application Manager) and the other file 7z (which is the program itself). You need both of these...first the exe and then the 7z.
When the .exe involves the Akamai, there are typically firewall issues. If you are going to continue with this download, please start again, but this time with the antivirus and firewall(s) disabled before you start the download and install process. From where is the download coming..the Adobe web site direct or other?
You could also get the tryout of 13 from the following web site and insert your purchased serial number in them during installation.
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
The key here is to read and carryout carefully the web site's "Note: Very Important Instructions" in order to avoid an Access Denied Message.
Please review and consider.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Trouble with carrying values over to other pages and calculating

Hi folks - I have a calcuation I'm trying to do with five fields. Three of the fields come from other pages in my PDF (there are 10 pages total). When the first value gets carried over to my calculation, that number should show up in my 'Total' field but it isn't. I think it's b/c the other two fields which get carried over from other locations in my PDF, if they haven't been entered into the form yet, are basically NULL. Hence the calcuation doesn't work (just shows zero in my 'Total' field). However, if values are placed into these other 2 fields in my PDF, the calucaltion and subsequent 'Total' works. Not sure how to resolve this? Thanks!

Hi GKaiseril,
Thanks for replying...no javascript errors. Not sure how to determine the order, or where that is shown?
The first 2 fields get carried over, and added together as follows:
event.value = this.getField("Total endowment care fund corpus, reserves, and unexpended income").value + this.getField("Ending Balance, Cost Basis").value;
Then, once the 3rd field is carried over, I subtract it from the total of the previous 2 fields:
event.value = this.getField("Total trust funds corpus").value - this.getField("Cost Basis, Total Investments").value;
Here's the PDF in question, the calculations take place on page 10: http://www.cfb.ca.gov/audits/2012ecfscf_report.pdf
These calculations don't work when just the first number is carried over....so say I enter in 20 into the first line of Schedule A on page 5 - that number gets carried over to Schedule F on page 10 line #1 just fine, but it doesn't show in line 5 (Difference). However, the calcuations work perfectly once the next number (from Schedule D, page 8) gets placed into line 2 on page 10.....

Trouble with Infinity installation and now phone l...

Hi, I was meant to get Infinity installed yesterday but the engineer didn't show up. Well actually he drove straight past my house because I was standing outside waiting for him. He then told his manager saying he knocked on my door at 4:30pm which is odd as I saw him drive by at around 4:45pm.
So after multiple hours of waiting and calling to sort this out I decided today to cancel Infinity. However BT instead went and cancelled everything even though on the phone the staff I spoke to understood I only wanted to cancel the broadband.
The problem is that I paid upfront for the line rental and today I received an email saying I wouldn't get reimbursed.
After this email I spoke to BT again who said there was a mistake and my line is still working. Anyway I get home and lo and behold I can't dial out. All numbers are "not recognised".
I'm at my wits ends. I've spent multiple hours dealing with this. Does anyone have any suggestions to how I can sort this out?
I'm considering just moving everything to Virgin and taking BT to the small claims court to get my money reimbursed.
Thanks.

Hi Simonas,
I am really sorry you had to stand there and watch your engineer disappear over the horizon! Its poor when that happens and I apologise you had further problems trying to get help on our call queues.
I'll be happy to have a closer look at this for you and give you a call back so we can get everything sorted out.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Trouble with cc installation

Hi I have been using CC for a few months no problem but when I tried to open it last week I had a message "Unable to reach Adobe servers, check firewall settings" even with turning firewall off I still got the same message so after reading up on the problem I deleted CC
and downloaded a new version but now when I try to install it all I get is Adobe Installer opens with the message "Please connect to the internet and try again" can anyone please help with this

All sorted through a chat session, had to ------
In the LAN settings box, check the box 'Automatically detect settings'.
: Then "uncheck" all the other check boxes like 'Use automatic configuration script', 'Use a proxy server' , Bypass proxy server' .
everything good now

Trouble with Leopard Installation

I bought a Macbook Pro on Amazon, and it shipped with Leopard, but not installed.
So I just run up the Leopard Installation DVD, and followed the process.
The thing is, after a loooong time, my computer was still stuck on the boot screen(grey screen with apple logo, and the rounded animations of loading).
Now, every time I turn it on, it doest boot, stay stuck on that screen.
Can anybody help me?

Disconnect all non-Apple peripherals.
1. Erase and install 10.4 from the original startup disks.
2. Restore following the directions here:
http://docs.info.apple.com/article.html?artnum=61802
3. Upgrade to Leopard from the Leopard installer disk.
If it still fails, you may need to see if there is a hardware issue with the machine:
http://docs.info.apple.com/article.html?artnum=303081
If none shows any problem, but it still won't boot either you got a bad installer disk, or you had your machine shipped with bad RAM, and you should call AppleCare:
http://www.apple.com/contact/phone_contacts.html
Call also the store you bought the machine from to find out what time period do you have to return for replacement of a lemon.
Message was edited by: a brody

Trouble with Filemaker Installation Package-User Issue

I'm have an issue with a downloaded update from Filemaker (.dmg). When I open the file the Installation Package that we all see is a blank icon. Says it wants to open with Adobe PageMaker. If I change user to another I have set up, the package icon is correct and I can install the program. Unfortunately it is for the wrong user. Filemaker tech guy said it had to do with permissions. So I repaired disk permissions with Disk Utility. No good. What else can I do? Any ideas. I don't want to create a whole new user/administrator, since I have hundreds of programs linked to it.
mikkbrick
G5 Mac OS X (10.4.7)
G5 Mac OS X (10.4.4)

Hard Drive went down within hours. Explains unusual behavior.

Strange Trouble with 10g installation

hi
Scenario is
Windows 2003 Std Server SP1 - IE6 on HP DL380 2 Xeon Processor - 4GB RAM windows update done
Oracle 10g R2 installation done successfully, no errors
Local Administrator added at Log on as Batch job at local security policy
EM URL included in IE trusted site list too.
now when i browse EM - its open the first page, ask for username and password
try to log in as sys - syspassword and role as sysdba, but EM is not moving to next page.. it just validate the credentials and coming back to same login page.
without any error showing, if i give wrong credentials than it shows that its wrong.
means its performing validity.. than why its not moving to next page with correct credentials
any ideas/comments/solution???
Saifee S L

hi
"Log on as batch job " is granted to local administrator
Even Recreated DB with DBCA, EMCA rebuild too
still situation same, takes user name and password for sys - login as sysdba. no next page
any guess guys.. as its really urgent now..

Trouble with BDK Installation over J2SE 1.4

Similar Messages

Maybe you are looking for