Trouble with Bluetooth device after ios8 update. I have jawbone era HD

Bluetooth trouble since ios8 update. I have a new jawbone eraHD

make it forget the headset
put the headset in discovery / pairing mode
make sure it's not currently connected to another device like a tablet or computer
and re-add it to the phone in settings under bluetooth

Similar Messages

  • Itunes does not recognize my device after ios8 update

    Why does iTunes does not recognize my device after iOS8 update and what can I do to resolve this.
    I am getting a "plug-into-Itunes-logo" screen on my iPad. Thx!

    Hi there janis831,
    It sounds like your device may be stuck in Recovery Mode. Take a look at the article below for how to restore your device.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    -Griff W.

  • Trouble with Bluetooth Devices

    I have a MacBook Pro 13" from late-2011.  Recently I have decided to use Bluetooth headsets instead of wired earbuds because I tend to forget they are in my ears and when I get up, they are yanked out of my ears, hurting me and potentially pulling my notebook off of something.  I had an LG Tone before getting my current Motorola S11-FLEX HD headset.  I switched because of the problems I have been having with Bluetooth but switching has not solved the issue.
    My biggest problem with my Bluetooth headsets is that the audio stutters and then de-syncs with any video.  The de-sync can be as bad as a full second.  I'll see the video's actions before I hear them.  The de-sync also affects the responsiveness of controls.  After I give a command, the audio will continue to play for however long the de-sync is before the command is performed.  It's like it's making up for the lost time.  The only solution I have come across is turning off the device, then turning it back on but that only works some of the time.  Usually, I have to turn it off and then on again two or three times before the de-syncing issue disappears.  I have no idea the cause as my LG Tone works to specifications with devices that belong to other people.  I have found that moving my head in a certain direction will cause the de-sync.  Sometimes, it's leaning back; other times, it's tilting my head.  It's as if the Bluetooth field is planar and I'm jumping out of the plane.
    Another issue is the distance I can be from my device.  My Bluetooth headsets boasts being able to function perfectly as far as 30 feet for one headset but moving even 5 feet will cause the previously mentioned de-syncing if the audio is playing.  If I pause the audio, I can move about 10 feet.  After I move 10 feet, when I press play, the de-sync appears.  It renders the function of being wireless to being useless.  I wanted to Bluetooth so I didn't have to pause, take off my device, do what I need to do, and before coming back, putting on the device, and resuming play, hoping that nothing has gone wrong to cause a de-syncing issue.
    A third issue I have is that sometimes, while listening to some audio of some kind, another program will make a noise causing the audio to cut out.  My notebook or the web browser is not aware that audio is no longer playing.  It's as if the new program has muted the original audio.  The only cure: turning off the device and turning it on again and hoping it's working.
    The last issue I can think of is that when I turn my notebook off for any reason, all Bluetooth devices are forgotten causing me to go through the hassle of repairing the devices again but many times, the repairing process fails and despite being on and not paired to anything else, my notebook is unable to pair unless I turn both the device off and my notebook's Bluetooth off before turning both back on.
    Has anyone run into issues like this? If so, does anyone have any recommendations on how to correct the problem? The problem is on my notebook side as the devices work fine with other products.  The LG Tone could be used across the house when it was attached to my father's Kindle Fire and when attached to my iPhone 5, I could walk 20 feet with doors and concrete between me and the device before any issues began (both devices had trouble with my iPhone but pausing usually fixes the issue so I don't care).  Please, I need some advice and help.

    Some details missing.
    I have a Pioneer DEH-P7000BT. On telephone settings, everything OK.
    When I want to sync to my Audio Bluetooth, I hear the sound in slow motion :-)
    I have to delete the Bluetooth device on the radio, and re-syncing on Audio Devices and everything fine.
    Same thing all the time.
    When I had iOS 3.1.3 on my iPhone 3G, everything was OK.
    I can't find Firmware Update for my radio.

  • My sound car does not pair up with bluetooth anymore, after i updated to iOS7. Any help?

    I have an iPhone 5, and used to listen music on my car, using the bluetooth. Now i updated to iOS7, and the iPhone says that he can not connect anymore. It finds the stereo, but does not pair up. Tried to reboot, etc, but didnt work. Any help?

    Hello there, DonnaLou.
    The following Knowledge Base article provides some pretty extensive steps for troubleshooting Bluetooth issues:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    If you feel you have gone through all of these steps already, the article recoommends:
    If the issue persists after restoring your iOS device in iTunes, contact Apple for support and service options.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Do you have trouble with Bluetooth devices on ios 5

    I have to delete BT Hands free all time and repairing the devices to ear iTunes

    Some details missing.
    I have a Pioneer DEH-P7000BT. On telephone settings, everything OK.
    When I want to sync to my Audio Bluetooth, I hear the sound in slow motion :-)
    I have to delete the Bluetooth device on the radio, and re-syncing on Audio Devices and everything fine.
    Same thing all the time.
    When I had iOS 3.1.3 on my iPhone 3G, everything was OK.
    I can't find Firmware Update for my radio.

  • Trouble with the device after iOS 5.0.1 update

    After upgrding my iPod Touch 4G to iOS 5.0.1, the device seems to have slowed down a little bit. For instance when im listening to music and i unlock my iPoad it takes a long tme to unlock (5-6 secs).Even during multi-tasking i experience a serious lag, it like my iPod is dragging itself and at times the screen just goes blank. I tried restoring it, but of no use. Kindy assist

    If you do a reset to factory ondition, you'll loose your data. First...
    Try just a simple Reset. Does Spotlight find if you do a search for it? Also check your Restrictions settings.
    Reset:     Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

  • Anyone have trouble with phone crashing after Facebook update today?

    After pressing the update button for the Facebook app this morning, I set the phone down.  A few minutes later I picked it up and the phone didn't work at all.  It's as if there is no power to the phone.   The screen is black.  I can't get it to power on.  It doesn't register when the phone is plugged in to charge.  Nothing.  Dead.  Help.  Please!

    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • HT204368 I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    NovaRiddle wrote:
    I am having trouble pairing my iPhone4 with bluetooth device. ...
    Depends on the device...
    Have a look here for Supported Bluetooth Profiles
    http://support.apple.com/kb/HT3647

  • Hello, I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13..

    Hello,
    I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13:AK something like that and all the other previously connected devices appear in this same form in the bluetooth list how do I fix this back and it is confusing to connect to a device with no name but some unknown Bluetooth address so how do I find the device name back????
    SO PLEAZZZZZ HELP!!!!!

    An iPod can only pair with an iPhone for internet sharing provided that the iPhone has the subscribed to the tethering plan. The BT profiles do not permit file tansfer between IDevices by BT. The only BT pairsin is by app and those ar for peer-to-peer gaming.

  • Anyone else having trouble with FCPX crashing after the OSX update?

    Anyone else having trouble with FCPX crashing after the OSX update? It NEVER crashed until the update. The night before last it crashed 20 times in 45 minutes. I can't finish my project because of it.
    Retina, Mid 2012
    Processor  2.3 GHz Intel Core i7
    Memory  8 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GT 650M 1024 MB
    Software  OS X 10.9 (13A603)

    therealamaru wrote:
    I don't understand the question. I am simply editing.
    There are some patterns of crashes that suggest possible causes and fixes; some users report crashes when FCPX is in the process of loading; others while importing/exporting, etc. Asking to narrow the list of possibilities.
    Suggest starting with three things:
    1) Update the software from the APp Store  if need be.
    2) Trash preferences.
    3) Repair permissions.
    Russ

  • IPad2 got a terrible trouble with 3G network after updateing to IOS5.1.1

    Hello guys, I got a terrible trouble with 3G network after updateing to IOS 5.1.1.    Now when I turn on my cellular data, the iPad 2 can say the carrier and 3G on the left top. But when I tap the Safari, it turns to be:"PDP authentication failure". I did the update to 5.1.1 last night, before that every thing is fine, and now I can't use my 3G at all.
    Could anyone please tell me what's happing and what should I do???
    Thank you so much!

    Hi Miky. After upgrading to ios 5.1 I had the same problem.
    I reset the APN on network settings and rewriting the same. iPad now working on 3G.
    My operator is 3 ITA
    iPad 1 64 GB Wi-Fi + 3G

  • Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

    Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

    Tell Apple about it: http://www.apple.com/feedback/iphone.html
    Be sure to give as much detail as possible.
    I would also check LG's site.

  • Any new  about updating lion to 10.7.4 and problems  with bluetooth devices  like Bose Soundlink Bluetooth Speaker?

    Any new  about updating lion to 10.7.4 and problems  with bluetooth devices  like Bose Soundlink Bluetooth Speaker?

    Monroe
    Just in the moment i updated to lion 10.7.4  my Bose Soundlink Bluetooth  stop working as  good as it was. I´m gonna try the update in the Bose  web page. I hope  it works

  • Has anyone else been having trouble with safari ever since the update? I have restarted several times,mans it still doesn't work.

    Has anyone else been having trouble with safari ever since the update? I have restarted several times, it still doesn't work.

    Greetings Blueleoapple,
    After reading your post, it sounds like you are experiencing an error with Safari. You may want to consider resetting your device, which is different from restarting. This article provides detailed instructions for Restarting, and Reseting:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    How to restart
    Press and hold the Sleep/Wake button until the red slider appears.
    Drag the slider to turn your device completely off.
    After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
    How to reset
    You should reset your device as a last resort and only if you can't restart it.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • Can not update apps after IOS8 update on iPhone 4s

    Can not update apps after IOS8 update on iPhone 4s
    I can no longer update apps on my iPhone 4s after the IOS 8 update. The IOS 8 update took a very long time to complete, maybe 12 hours, and afterwards, it worked but updating packages were very slow. Package updates have since been problematic and about 4 days ago, it stopped being able to update any packages. I click on them to update and they never make any progress. I have 2.8 Gbytes free and I keep deleting more and more packages, pictures, etc. It seems like, from the amount of stuff that I have deleted, I should have more than 2.8 Gbytes free.
    Is anyone else having this kind of problem?

    16GB iPhone4: Go to Settings, scroll down to iTunes & App Stores and touch. At the top of the next page it shows: Apple ID. Touch this. Select Sign Out. Your Apple ID will go away. Re-enter Apple ID and password. Try App Store again.
       Other solutions were to go to Settings:General:Date&Time and turn off auto-update, then change date to next year. This didn't work for me, nor a lot of other users on the forums. It took reading a lot of threads to find the log-out, log-in solution. Even on the official Apple Website all I saw was: Make sure your connection is working, battery is charged, desktop is plugged in when you try to sync. OK I exaggerate, but with all the users posting this problem, you'd think they'd post their solutions when they work with a Tech Help call.

Maybe you are looking for

  • Is there a better way to do this? Binary File + MERGE

    Version BANNER Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production PL/SQL Release 11.2.0.2.0 - Production CORE    11.2.0.2.0      Production TNS for Solaris: Version 11.2.0.2.0 - Production NLSRTL Version 11.2.0.2.0 - Product

  • Traverse JTable cells with arrow keys?

    I want to be able to use arrow keys to travel in the matrix. But I want to restrict entering column 0. That is, the user should not be able to enter column 0, with the arrow keys (and neither using the mouse). Anyone have hints how to do this?

  • Imovie complete project

    After completing a iMovie or Idvd project can it be imported to Final Cut Express?

  • Mac book air '13. Should I buy now?

    Should I buy a 2013 macbook air now?  Heard many complaints about Wi-Fi connection drop out problems.  Thanks, Alan

  • Reducing number of columns in case query

    Hi all, I am operating on 10G R/2. I have a query which produces the columns with the number of counts. SUM (CASE WHEN LTRIM(RTRIM(W_O)) ='ROKOLBIN' THEN 1 ELSE 0 END) AS "O_ROKOLBIN", SUM (CASE WHEN LTRIM(RTRIM(W_I)) = 'ROKOLBIN'THEN 1 ELSE 0 END) A