Trouble with Bridge CS5.1

I am running the latest version of the Lion (10.7.2).
After the upgrade of Camera Raw Bridge become unstable and useless for me.
As soon as I try to click on the menu bar the Bridge freeze and it is not possible to do other than using the forced termination (opt / cmd / esc).
I have reset the preferences, purge the entire Thummbnail Cache and reset to Standard Workspaces.
I have taken the previous version from backup and made a restart. But the problem is still there.
Is there anyone else who has experienced this?
Will a reinstallation of Bridge solve the problem?
Kind regards
Venche Jensen.

I will try to remove the ARC, and then try to revert to the previous version of ARC.
I have tried to open a raw file via Photoshop. It wount work. I will giv you a feedback when done.
Sendt fra min iPad
Den 16. okt. 2011 kl. 18:38 skrev Omke Oudeman <[email protected]>:
Re: Trouble with Bridge CS5.1
created by Omke Oudeman in Bridge Macintosh - View the full discussion
Since the menu bar on top hang too, I think it is a combination of problem the upgrade of Mac OS and Bridge + ACR.
If you have the option to revert to the previous version of ACR (6.4) and check if this sorted things out it might be helpful for all other users. Personal I have not yet upgraded to Lion (I'm on 10.6.8) and have ACR 6.5 installed. It only gives me the problem that I can't choose an other location for the files in Adobe Photo downloader but that's fine, I always have the same folder i sent them to so that is working for me.
If you have a back up inTime Machine or other Back Up try to find the 6.4 version. Or check the thread about Photodownloader to see how I retrieved it with re install.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3973971#3973971
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3973971#3973971. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge Macintosh by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

Having trouble with Bridge CS5.1 building previews

I'm using Adobe Bridge CS5.1 and it has stopped building previews that are correct, if I open the image in Camera Raw it looks accurate but the preview in Bridge is not even close?

Purge the cache.

Downloading with Bridge CS5

Downloading with Bridge CS5
When I download from my SD card with Bridge, it only stores 9 images into a folder (date named), so I get several folders created all with just 9 images in them!
How do I reset this to only have one folder created with ALL images in it?

Are you by any chance taking exactly just 9 shots per day? Are folders created by date?
Exactly what version of CS5 are you running? CS5 12.what?
What's the exact version of your OS?
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Going nuts with Bridge CS5

Does anyone have Adobe CS5 on a 2010 MacBook Pro 6,2? If so, do you have trouble with fullscreen photo view in Bridge on various RAW photo formats? (NEF, PEF, CR2, etc.)
I've already re-installed 10.6.6 and Adobe because this is the same Mac I dropped a couple weeks ago.
Here's my thread on Adobe forums, I wasn't able to get much headway- http://forums.adobe.com/message/3551309#3551309
Do you have any other thoughts on what is nuking Bridge? I'm calling adobe tomorrow, I just want to have as much troubleshooting information available in case I get the level 1 scriptie.

You say you are publishing two sites. Are you trying to publish both using CNAMEs under the same individual mobile me account. Publishing all sites in an account directly from iWebb will work with the web.me.com host, but a personal domain CNAME redirect after setting up two sites, both setup with CNAME option can cause "syncing" problems--it does not track the last site you republished/updated--mixing them up.
If having multiple personal domains/websites, i.e not in the URL form of web.me.com, are important I would suggest You upgrade to the mobile me family pack at $149 to get the multiple CNAMEs, more storage, and more email options. In my case I created multiple users on my computer each with their own default idisk and mobileme account in sys preferences. Each "user" on my computer represented a specific interest/account paired with its specific iPhoto Library and iTunes list for iWeb support. Works very cleanly if you do iWeb for multiple volunteer organizations. Enable fast user switching in System Preferences>accounts>Login Options to make account switching easy.
See the the notes at the end of this excellent fact sheet to understand the CNAME problem.
http://iwebfaq.org/site/iWeb_Domains.html

Trouble with bridge mode and port forwarding

I have a Westell Model 6100F DSL modem in bridge mode into my network and I'm having trouble forwarding ports. Is there any general guidance available to do this. I have set many of my friends networks up to allow port forwarding but all have been on other service providers, mainly cable. (my experience) My network is the only one I have had trouble with.
Basically, my question is, while in bridge mode, does the modem forward all incoming traffic to my NAT router or do I need to apply special port forwarding settings in the modem to allow this?
If bridge mode is the reason I cannot forward the ports, can someone explain how to set the WEstell 6100F back to factory defaults so I can start over.
Any other suggestions?
Thanks in advance.
Paul

If bridge mode is set up correctly, your router should be holding the Public IP address (basically not something that is a 192.168 address) as shown at http://www.whatismyip.com/ and compared against what IP your router has.
If your router has the public IP, all problems lie with either your router or your PC's firewall and configuration. I'd check out portforward.com for some guides on forwarding ports for your router or poarticular application if you need some additional help.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Bug with Bridge CS5 output /web gallery - renames files with ASCII

has anyone found a fix around this ? It makes my HTML galleries useless since it renames all the original files in ASCII code and there is no work around this.
I know that this issue has been going on for a while but Adobe hasn't done anything about this yet

Solved!
This works for Windows. I imagine the Mac solution is similar. Props to William Zauscher for helping find an answer.
I take no responsibliity for any damage caused to your computer, Photoshop or Bridge...
In Windows, browse to C:\Program Files\Common Files\Adobe\Bridge CS5 Extensions\Adobe Output Module\mediagallery\resources\scripts
In the file named "galleryCreator.jsxinc" replace the lines:
AOM.AmgGalleryCreator.createUniqueFileName = function(filePath, jpgFile, createMode)
    var alteredName;
    while (true)
         alteredName = "_";
        for (var i=0; i<10; i++)
             alteredName += Math.floor(Math.random() * 10);
         alteredName += ".jpg";
        var f = new File(filePath + alteredName);
        if (!f.exists)
            break;
     return alteredName;
...with the following:
AOM.AmgGalleryCreator.createUniqueFileName = function(filePath, jpgFile, createMode)
                var alteredName;
                while (true)
                                alteredName = "_";
                                alteredName += jpgFile += ".jpg";
                                var f = new File(filePath + alteredName);
                                if (!f.exists)
                                                break;
                return alteredName;
You can cut and paste the above. Just save a version of the original file somewhere in case of screwups...
Cheers!
-Mark

Problem with Bridge CS5 and Tools Photoshop Batch

When I select several images in Bridge CS5 and go to Tool>Photoshop>Batch and try an run an Action, I receive an error message asking for the Install disk. Bridge at that point freezes until I put in the install disk and then it runs the batch action fine.
This is very annoying as I always have to have the disk in my DVD Drive.
Any points would be welcomed.
Thanks,

Go to preferences/startup scripts and make sure there is a check mark for Bridge and Photoshop scripts.

Trouble with bridge and CS3

I had a problem with bridge and now it says to repair the problem i have to reactivate my software. When I go to do that it say I have to take it off another computer before I activate it. But it is not nor has it ever been on another computer. Can anyone help me?

mad at 78 wrote:
I tried it and it said Bridge operation could not complete.
This does not make sense. Did you get the reset window with the 3 options?

I can't associate a jpeg or tif with Bridge CS5

I want to be able to open/view jpeg and other files in Bridge CS5 by using the right click,open command. In Windows 7 I am trying to associate these files: I highlight the jpeg or tif, right click, open as, browse. I find BridgeCS5.exe, open,but Bridge CS5 is not added as an option. I can do the same process and select PS CS5.exe , and the association works fine.
Any ideas would be greatly appreciated.

Rather than right click on the file, right click on the Folder and select "Browse in Adobe Bridge CS5"
If that option is not there have a look at :-
http://photography-on-the.net/forum/showthread.php?t=409251
Where it will show you how to set it up.

Trouble with bridge

Hi everyone,
I'm on Mac, Photoshop CS5,1 all updated ok.
I have a new problem after processed an image from Bridge to Camera Raw, when I click "Finish" and I return to Bridge, it doesn't take into account changes made in Camera Raw and I do not have the 2 icons that tells me that the image was cropped and processed.
I purged the cache for bridge, and by running Bridge with the option key pressed, it still doesn't work.
Sometimes it works once time, other times it is necessary to restart the computer.
Has anyone had this problem ? any solution ?
Best regards
Pascal

To precise : OSX 10.6.8 and I uninstalled / re-intalled completely photoshop, including clearing manually all adobe stuff in osx librairies.
Thank you

Help with Bridge CS5 reading RAWs from a Nikon d7100

So just bought a Nikon D7100, and not Bridge and PS CS5 cannot open my RAW photos. Is there something else I can do, besides upgrading to cs6??
My current version of bridge is 4.1.0.54 and photoshop 12.1

Is there something else I can do, besides upgrading to cs6??
You can either upgrade to at least CS6 because you need at least ACR 7.4 to support your new Camera NEF format and PSCS6 (currently at ACR 8.3 but started with ACR 7) can give you the correct thumbs and previews form NEF or you can use the Free Adobe DNG Converter and first convert the NEF to Adobes DNG and then work on these files in CS5.
Try these links (or do a search on Adobe Downloads if they don's work, many are country specific:
For Mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5738
For Windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5739

How to Replace All the Bridge CS6 Stock Keywords With Bridge CS5 Keywords

I have CS6 working in a different computer than the one that houses CS5. Bridge CS6 can read CS5 keywords when it opens an "old" photo but it has none of its own (besides the stock ones that came with the program). How can I replace all the stock CS6 keywords with the keywords from CS5?

Have you tried the Import/Export options from the tiny menu at the top-right of the Keywords panel?

Trouble with Photoshop CS5.1 eps images with clipping path placed in FHMX

Photoshop CS5 eps files, clearcut with clipping paths now show a black box instead of a transparent background when placing in Freehand MX.
Tiff files with clipping paths work OK but look ugly and make Freehand redraw the screen all the time, thus slowing down my work.
The eps file placed in InDesign CS5.5 is OK
Anybody knows a work-around? I', doing most of my work in Freehand

Photoshop CS5 eps files, clearcut with clipping paths now show a black box instead of a transparent background when placing in Freehand MX.
Tiff files with clipping paths work OK but look ugly and make Freehand redraw the screen all the time, thus slowing down my work.
The eps file placed in InDesign CS5.5 is OK
Anybody knows a work-around? I', doing most of my work in Freehand

Is anyone having trouble with Dreamweaver CS5?

I am unable to create a new site or manage sites. Upon save Dreamweaver tells me "WARNING: The Spry assets folder is not inside the site. Please select a valid folder in your local site root."
I have created a SpryAssets folder, unistalled and reinstalled Dreamweaver, tried just about everything including calling Adobe tech support with no resolution (twice). Adobe has "elevated" my case (again), but I think that means "We don't know, so go away." (Sorry, Adobe, I'm VERY frustrated here!)
Anybody got any ideas?

Thanks for the help, Ben.
I did clear the cache and the problem still exists. Then I unistalled my Dreamweaver CS5, downloaded a trial version, installed that one, but that didn't work either.
Here are some screen captures of the dialog boxes that I am experiencing:
This is the first warning I get when trying to establish a site.
So then I select the SpryAssets folder in my main folder.
Again, I get the warning.
Then the only way out of the dialog box is to hit cancel, without establishing a site.
I would greatly appreciate it if anyone has seen this problem and been able to solve it. It's driving me crazy.
By the way, I am running Macintosh OS 10.5.8. Could this be the problem?

Trouble with Illustrator CS5 Trial Installation on Mac

Hi Everyone,
I am trying to install the trial version of Illustrator CS5. I am using the Adobe Download Assistant and it has produced an error.
The error is number 4960 and it says that the disk image for Illustrator could not be opened.
If anyone could help me with this, that would be great!
Thanks.

Nickyonmac111 error 4960 is a Mac OS error indicating your DMG file is corrupted. I would recommend you remove the Adobe Download Assistant and try the download again. You might also want to try saving to a different location when prompted.

Trouble with Bridge CS5.1

Similar Messages

Maybe you are looking for