Trouble with bridge

Hi everyone,
I'm on Mac, Photoshop CS5,1 all updated ok.
I have a new problem after processed an image from Bridge to Camera Raw, when I click "Finish" and I return to Bridge, it doesn't take into account changes made in Camera Raw and I do not have the 2 icons that tells me that the image was cropped and processed.
I purged the cache for bridge, and by running Bridge with the option key pressed, it still doesn't work.
Sometimes it works once time, other times it is necessary to restart the computer.
Has anyone had this problem ? any solution ?
Best regards
Pascal

To precise : OSX 10.6.8 and I uninstalled / re-intalled completely photoshop, including clearing manually all adobe stuff in osx librairies.
Thank you

Similar Messages

Trouble with Bridge CS5.1

I am running the latest version of the Lion (10.7.2).
After the upgrade of Camera Raw Bridge become unstable and useless for me.
As soon as I try to click on the menu bar the Bridge freeze and it is not possible to do other than using the forced termination (opt / cmd / esc).
I have reset the preferences, purge the entire Thummbnail Cache and reset to Standard Workspaces.
I have taken the previous version from backup and made a restart. But the problem is still there.
Is there anyone else who has experienced this?
Will a reinstallation of Bridge solve the problem?
Kind regards
Venche Jensen.

I will try to remove the ARC, and then try to revert to the previous version of ARC.
I have tried to open a raw file via Photoshop. It wount work. I will giv you a feedback when done.
Sendt fra min iPad
Den 16. okt. 2011 kl. 18:38 skrev Omke Oudeman <[email protected]>:
Re: Trouble with Bridge CS5.1
created by Omke Oudeman in Bridge Macintosh - View the full discussion
Since the menu bar on top hang too, I think it is a combination of problem the upgrade of Mac OS and Bridge + ACR.
If you have the option to revert to the previous version of ACR (6.4) and check if this sorted things out it might be helpful for all other users. Personal I have not yet upgraded to Lion (I'm on 10.6.8) and have ACR 6.5 installed. It only gives me the problem that I can't choose an other location for the files in Adobe Photo downloader but that's fine, I always have the same folder i sent them to so that is working for me.
If you have a back up inTime Machine or other Back Up try to find the 6.4 version. Or check the thread about Photodownloader to see how I retrieved it with re install.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3973971#3973971
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3973971#3973971. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge Macintosh by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Trouble with bridge mode and port forwarding

I have a Westell Model 6100F DSL modem in bridge mode into my network and I'm having trouble forwarding ports. Is there any general guidance available to do this. I have set many of my friends networks up to allow port forwarding but all have been on other service providers, mainly cable. (my experience) My network is the only one I have had trouble with.
Basically, my question is, while in bridge mode, does the modem forward all incoming traffic to my NAT router or do I need to apply special port forwarding settings in the modem to allow this?
If bridge mode is the reason I cannot forward the ports, can someone explain how to set the WEstell 6100F back to factory defaults so I can start over.
Any other suggestions?
Thanks in advance.
Paul

If bridge mode is set up correctly, your router should be holding the Public IP address (basically not something that is a 192.168 address) as shown at http://www.whatismyip.com/ and compared against what IP your router has.
If your router has the public IP, all problems lie with either your router or your PC's firewall and configuration. I'd check out portforward.com for some guides on forwarding ports for your router or poarticular application if you need some additional help.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Trouble with bridge and CS3

I had a problem with bridge and now it says to repair the problem i have to reactivate my software. When I go to do that it say I have to take it off another computer before I activate it. But it is not nor has it ever been on another computer. Can anyone help me?

mad at 78 wrote:
I tried it and it said Bridge operation could not complete.
This does not make sense. Did you get the reset window with the 3 options?

Having trouble with Bridge CS5.1 building previews

I'm using Adobe Bridge CS5.1 and it has stopped building previews that are correct, if I open the image in Camera Raw it looks accurate but the preview in Bridge is not even close?

Purge the cache.

Trouble with Adobe Bridge CS5.5 for Mac Lion Photo downloader

Hi, I am having trouble with CS5.5 Bridge's photdownloader when I am trying to choose a folder location.
Im using Lion / Mac
When I try to choose say an external drive or another folder location it will freeze up and stay on "Choose" the button flashes on and off but when i try to click it it will not respond or select the desired file location
The photodownloader does not respond to any other commands..i have to force quit it..yes i have re-booted..re-started and problem remains..
The only way i can download photos is by choosing the first file option of the pictures file on my harddrive which is not want I wish to do..i have noticed that this started happening after the Raw update..was wondering if this is affecting Photodownloader..
any suggestions would be greatly appreciated..thank you

Thank you, SG, for clarifying which OS's this will work with.
I agree with Jennie - the beauty of "get photos from camera" is that it takes 2 steps out of the workaround you mention above. Personally, I'm okay living with 6.4.1, as I have an older camera. I won't be happy if one of the push updates re-updates me to 6.5 though. I wouldn't want to redo the reinstallation of the new version. This method will not work for any of my clients or students though - they normally can't comfortably follow the technicality of downgrading, and some have newer cameras and would need the 6.5 version. (I don't believe in betas for my clients, and neither do they, for the most part)
I guess I should thank Adobe - some of my clients have needed tech support to perform the downgrade (SO many people aren't comfortable technically), and some of my clients needed to be retaught the workaround SG mentions. Adobe's flub has actually made me a little money - which I'd rather not have to make this way.
SG's workaround does work and makes sense - but for my clients with hundreds of images at a time, who have to rename items, add copyright info, & etc., this more than doubles their work-time for the start of their workflow. I hope Adobe gets that GM version out soon.
BTW - this issue supports an argument I've hadfor years regarding "PUSH" updates. I always tell my clients and students not to do them until they research the update. Because of what I do, I do have to install them personally, but I'm grateful I'm comfortable fixing things myself.

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

Argh - once again, I find my solution right after posting this. Left out one modification to the SWIG script, now it runs in 29 seconds vs C 16 seconds, I can live with that.

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my p

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work. The message appears "building criteria" and I get an endless loop on the lower left panel. How do I correct?

You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.

HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
Hi all,
When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated. However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
Thank you!
HN

Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG? Show the same area of the photo and zoom to 100%.
It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
The amount of grain depends on the ISO sensitivity setting on the camera.

Trouble with Mini-Bridge

I am using Photoshop CS6 on Windows 8.1 system. Have already had to disable Graphics Processor to stop the flickering window, now Mini-Bridge says it can't find any files. No problem with Bridge, just Mini-Bridge. Any ideas? Thanks

Thanks Curt. Yes Bridge is open. It is okay, I found the problem. Some of my library names changed when I upgraded to 8.1. Found the problem and solution.

The trouble with 'expression' -- how to edit that

I just walked to the corner bodega ( even though its korean sooo bodega is misleading ).. to get some beer...
ITS BEER THIRTY -- yipee !
and on way back down the block where I live ( which is suburban ) some boy kid on a bike was riding and playing with a girl kid ( probably was his slightly older sister - these kids probably around 12 years old ) in front of a rental property with some spanish americans hanging out in their cemented yard on hammocks near bar b q...with their own kids...(they have planted another hopeful "veg garden" around the perimeter of their so called yard...tomato plants etc )...so anyway, the picture here is a "neighborhood" of sorts with a somewhat lower middle class family atmosphere in a fairly lower class area on the verge of becoming middle class ( with God's help ).
And anyway, I passed by the boy kid on the bike and smiled at him cause he seemed to be a decent kid having fun with his friend ( they were sorta laughing about something and having fun before I showed up as the big "adult" and looked at me ). His smile back was like sunshine and true and he immediately recognized he could keep having fun with his friend and I wasn't a "threat" , but instead some sorta "neighbor". She did the same more or less ( I think she had some devious design re: the game they were playing ... like " OK, you think you're so great on that bike, try to CHASE me ! " or something like that....kid stuff... and fun thank God. This neighborhood has it's share of bad things going on in the streets at times. And that leads to my focus on " The trouble with expression".
A lot of people, like me for example, can't express themselves well in some ways. I didn't say , " Hi there kids ! What's new ? " when I met them on the way back from the bodega. I didn't stop and ask what the heck they were laughing about. Nor did I speak to the spanish people adjacent to the kids ...in their "yard" ...with the bar b q and hammock and obvious friday afternoon socializing they were into....
We in nyc area are typically a mixed bag of races... I'm white, kids were african amer ( black but more like brownish if you ask me ), spanish people like mexicans IMO... who cares. This is suburbia so you can imagine how more mixed it is in the city.
Anyway, the reason I don't express myself so well in situations like that ( spontaneously on the street ) is cause I used to stutter real bad as a kid.. couldnt talk... so I clamed up. All my life I've been fighting that disability ( and other "challenges" re: learning, reading , writing, asthma , etc ) in terms of the "repercusions". Kids like me make fun of me cause I stutter...I can't fight back verbally and lash out physically... become a "maniac". Get kicked out of city schools etc... Trouble maker. Can't express myself, fight back with words....when kids are mean to me. After a while they dont matter much as if they are mean I just keep quiet and keep mouth shut and start "thinking" instead... how to keep on top of this person and not let things get crazy... meet the challenge.
Turns out I'm not stupid and at some point my being " quiet" becomes a positive thing.. peers start asking my advice.. I'm suddenly a " deep thinker" in their eyes. I go from being disabled ( stupid ) to being " a deep thinker" about the age of puberty... when nobody knows what they are doing anymore.
I start thinking about expressing myself some other way than talking.. like maybe draw pictures... paint stuff, do things to have fun with people that doesnt put me in the " limelight".. where I have to talk etc. More success follows this tendency to socialize and express myself... and I discover that chics like the strong silent type.
( I have been into gymnastics thru my fathers infactuation with it since age 2 -- which I think eventually ( inadvertantly ) " cured me " of many of my learning disabilities etc -- (talk to an OT about this and modern child development stuff to know what I mean here )
Meanwhile I am very fond of dogs as my family has dogs one after the other and I am one of their best friends. I find I can communicate with dogs better than I can communicate with people sometimes. This seems to be a problem in some cases with some people, but for me it never got crazy... where I " loved dogs " more than I " love people ". I have never loved any dog more than any person and shudder when I think of those who do. Those people who do have more problems than I ever had to deal with.
And now, after all these years ( I am now 60 ), working on movies and tv stuff etc as a crew person with some college fine art schooling ( eventual photo major ) to get me started, I got into this " editing " stuff... A program I can actually " use " on my mousey computer introduces me to a more " final product " than I ever had access to before.
BUT I don't shoot motion pic stuff, cant afford that - and never could before basically, and now I think about the triple threats and future of movies and tv as a business... as well as the tools ( in this case the editing programs in conjunction with the cameras ( arri, panavision etc ) ) and the desire to express something ...
This has to be ( if you want an audience ) ... " tell a story ". You could just put a camera on a rocket ( strap it to the rocket ) and shoot the takeoff etc and show that.. but you need a V.O. saying " well, I just shot off a rocket and this is what it looked like"...to bring the experience to the audience... or else IMO there is no story.
Which leads to what's going on now in the world of reality tv, episodic tv , some big movies, etc. Telling a story is more than showing you stuff that you just wouldnt have seen if you hadn't been there yourself. Telling a story is more like saying something that bridges the gap between your own experience of life and its challenges ( of being part of your neighborhood and making sense of your own childhood and being an adult now maybe ).. and what others also have gone through to get to the same conclusions....
This is the object of " expression" IMO, whether you can talk about it, draw pictures about it, or make music about it...
And the editing program is a tool to help do that.. it is not the end all or purpose of life or the " personal crusade" in the long run.
It's one reason scary snakes often shock people out of their desire for comfort and predictable living... makes you think about that one serpent in the garden of eden you create for yourself .... and IMO who cares what editing program you use to write that and shoot it ??

Steve Grisetti, the MOD of the Premiere Elements forum and co-founder of a video/photo/editing Web site, Muvipix, did a nice article, "Don't just make a movie - tell a story." His audience was more consumer video editors, than the folk that we see around here, but his points were well-made, and were embraced by many in the Muvipix community.
I think that too many, forget that concept - and I am talking Hollywood and NYC here. It's almost as if, when the story breaks down, they instinctively know to throw in a car chase, or big explosion.
I know that I cite it too often around The Lounge, but that was what I enjoyed most about the LOR trilogy. It told a story. Now, though I had some exposure to the story, when much younger, I have to admit that I never read Tolkien, though almost everyone, that I knew, was busy with every book. Still, I only knew some of the high points, and not much more. However, almost immediately, I was drawn into the story, and only wished that I did not have to wait so long between episodes. The FX were cool, and I am a technoid sort, but it was the story that hooked me. I had read several articles on the FX production, so WAS looking for some of that, but what I wanted was the story. This is one that I will buy the BD "Director's Cut" of, and do a marathon. I have seen each segment, maybe three times, but never back to back to back. I still need to fill in a few blanks, and an entire day of viewing should do that - no phone, no visitors, nothing but LOR.
As far as human communications, I can talk, even more than I write here, but only concerning things that I care about. I am horrible at "small talk," and would rather addrss an auditorium of 10,000, on something that matters to me, than talk about the weather to a single person at a fund raiser. Not that long ago, I was seated next to a potential donor at a charity dinner. I was rather dreading it, and when she mentioned that she did not drink (what, no wine?), I was worried. At some point, early in the evening, the subject turned to politics. Now, I usually am very quiet on my feelings, as they are not exaclty politically correct, and worry about hurting feelings, or making a scene. I fielded a question on Senatorial candidates, and just decided to answer from my heart. Her eyes lit up, and I did not notice that the event had ended. Her husband was standing, as was my wife, and we were talking politics, talk-radio, FoxNews, Senator John Kyl, Will Rogers and much more. I found that we were kindred spirits. Finally, our spouses pulled us apart, and we departed. We continued that conversation at 2 - 3 more events during "the season." One day, my wife informed me that she had just given $10M to the foundation - the largest single gift ever. At least she wasn't a screaming liberal, as I would surely have really messed up the deal... However, had it all been small talk, I would have found a reason to excuse myself and hide in the bar for a few hours.
Also, the way that our society has developed, I will smile, nod, and say "hello" to strangers on the street, but always leave it at that. I am sure that many walk past and think "he wasn't all that friendly." They are probably right, but at least I was pleasant to them and did not rob them! Heck, I will usually tell telemarketers, "No, but thank you for your generous offer on that time-share... "
Hunt

IPhoto...trouble with a capital I

I have had more trouble with iPhoto than any other program I have had the pleasure of using. When I first got my Mac over a year ago it went onto my external hard drive and took every photo I had on a 1T drive and filled up my internal drive by putting the photos into the library.
I finally deleted all of the library so I could use my computer.
Then I finally used it a couple times to give it a second chance. As I was using it with a few photos it populated My Photos in My Books by Blurb.com. I had to go in a delete the library again because it would not let me delete them from the book photo selections.
I have finally decided to never use it again since I have Adobe Bridge that is better for organizing and viewing my photos. I think iPhoto is an evil program.

So, you came here to tell us that you couldn't figure out how to use iPhoto?
Regards
TD

Indesign slow with Bridge -Photoshop-Illustrator

Hello there,
First, sorry for my english i'm French.
One of my collegue is experiencing issue with CS6 indesign.
Installed in a PC with Intel core i7 370 2.93/2.93 gHZ, 16 GB RAM.
Windows seven 64 bits.
Once he open a files of more than 10 Mb in Indisign and open in the same times Bridge or photoshop to integrate pictures or illustrator the PC get really slow and the users must wait several minutes to get the work done.
I never use myself The CS6 so I don't know if this behaviour is normal.
Before that the user was using CS4 and he did not have so much trouble with the same kind of files and he was doing the same work on it.
Beside the CS6, the unit has some standart software installed, Microsoft office 2003 and basically that's all except web navigator and some soft like cccleaner,VLC,Quicktime, nero burning room, kaspersky antivirus...
He never get any error message, or blue screen or whatever...microsoft and adobe updates are done.
All users in the services have the same hardware and software and this is the only one who had issue, the only difference is that he is working on bigger files.
I have ask him to try to work on the PC of his colllegue to check if issue appears to but he willbe able to do the test tomorow PM only.
When we have migrate from CS4 to CS6, I did not reinstall windows, just desinstalled CS4 and then install CS6.
I didn't use the CS cleaner tool....
Did someone knows where the issue can come from ? drive access or software related ?
It's busy timing for now so I don't want to reinstall all the PC and CS6 before knowing it will solved the issue.
Thx a lot,
Elisa

Is there any technical support when you buy CS6 ???
I mean our compagny had Cs4 before and now - like there is no upgrade anymore- we bought 9 complete CS6 license ( including 2 master) and no help from adobe ?
So basically: adobe, it's we get your money we are happy if you have issue, we don't give a s**t !!!

Trouble with Photoshop Cs6

Having trouble with Photoshop cs6. Brushes that i have downloaded from 3rd party websites were deleted from Photoshop after months of use. We replaced all the brushes 1 by 1 but now there is an extreme lag in almost every function in photoshop that i had never experienced before. Dont know what is going wrong.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Anyone having trouble with computer running extremely slow with the color wheel continuously spinning.?

Updated with Yosemite and think that's when my problems started with my IMac being very slow. The color wheel keeps popping up and spinning not allowing me to move forward on typing or moving between websites etc. Extremely slow and never had this problem before Yosemite. Any real answers to this out there? I was on the phone with apple support for two and a half hours the other day and it's not made any difference in what the tech had me do to resolve this issue.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1266 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 250 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n    "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<13;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"9\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"10\f%@d\f%s\f%d\f%d\n\",@d);printa(\"11\f%@d\f%s\f%d\f%d\n\",@e);printa(\"12\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |fmfd|Goog|ksho|ndum|obso|realp|rned f|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,user/$UID} -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {Daemons,Agents}\ {load,disabl}ed {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 83 114;j=$?;for i in 0 1;do ((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74;B7 11;B4 0 0 11;C3 23+2*i;D4 24+2*i 14 66+i 92+i;done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 84 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Trouble with bridge

Similar Messages

Maybe you are looking for