Trouble with calendar and events populating phone

I am having a significant amount of trouble with getting my phone to populate my calendar and my events. I have had trouble with this since I got my phone at the end of April and I am getting tired of it. If i put new calendar entries in on my local calender or I sync from my active sync calender, the result is the same - nothing will show. The strange thing is is that the reminders will open up, everything is invisible to me. I've reinstalled the software and have been through the settings on my calender accounts. I am a business person and this is very important to me and I am starting to get frustrated with this.
Any help would be greatly appreciated!

Ok, I finally figured it out or better I finally got it to work after playing with it. For those who have the same issues I will give you the steps I have taken. It might sound a bit senseless but I didn't know what I was doing might actually make it work.
Anyways, I read somewhere that in order to be able to set a default Calendar in Settings they added a CalDAV account. I didn't have one but I do have a gmail account. Before adding that I tried again turning on and off the iCloud calendar which didn't help.
Then I went to the ical app on the iphone and added a new calendar which I called the same as my main one on the iCloud site (HomeCloud). I rebooted the phone every time I made a change. But didn't help either.
Then I deleted my iCloud account on the iphone reboooted and added it again, rebooted. Now the "Calendars" calendar was not on the iphone anymore but I could see my main HomeCloud, my UK Holiday and the gmail account calendar but nothing was synced.
Last step I tethered the iphone to my imac and synced via iTunes again and voila I could see everything synced correctly. Last thing I had to uncheck the gmail calendar on the iphone because it was set as the default and now the events I put in the iphone sync correctly with the iCloud site and my icals on my machines.
I hope this will help whoever has the same issue.

Similar Messages

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

Having trouble with iTunes playing on my phone...how do I adujust playlist from playing same song over and over...driving me crazy!....

having trouble with iTunes playing on my phone...how do I adujust playlist from playing same song over and over...driving me crazy!....

Check and make sure the repeat indicator isn't set to repeat the same song. It will have a little number 1 inside a circle on it if it is. Just keep hitting it until it goes white. It will cycle through repeat all, repeat 1, and repeat none.

TS4050 I am running Windows 8. Although my contacts and notes from my Ipod touch show up on icloud my calendar entries do not show up even though they do show up in my Google calendar and my windows phone calendar. Any suggestions not already covered?

I am running Windows 8. Although my contacts and notes from my Ipod touch show up on icloud my calendar entries do not show up even though they do show up in my Google calendar and my windows phone calendar. Any suggestions not already covered in trouble shooting articles?

As I mentioned earlier, you have to decide which calendar you want to use. You can either use Google or iCloud, but not both.
If you want to use your iCloud calendar, go to Settings>Mail,Contacts,Calendars>Default Account (in the Calendar section) and set this to your iCloud calendar. After doing so, all new events you add to your calendar will be added by default to your iCloud calendar, and as a result, will appear on icloud.com and your computer (if it is syncing calendars with your iCloud account).
If, on the other hand, you want to use your Google calendar (as it sounds like you are doing with your iPod), simply add the same Google calendar to your phone and your computer.

Calendars and events are missing from iCal

What happened was I closed the lid of my MacBook Pro to put it to sleep. When I opened the lid to wake it, the screen was dark, like it was between 0 brightness and the lowest brightness setting. It also was not responding to trackpad or keyboard input, so I restarted it. However, when my computer started up, it seems as if my Mail.app had reset and everything was gone from my iCal. With Mail.app, after I redid one account, it seemed to return to normal. With iCal, I tried to sync it with my Palm, hoping that my calendars and events would get transferred to iCal. However, that didn't work, and I am getting errors with Missing Sync. The errors I'm getting are:
OK TimeCopy
OK Mark/Space Conduit for AvantGo
OK Mark/Space Contacts
SyncClient error. Mingling failed.
OK Mark/Space Events with 1 message(s)
No folders have been selected to synchronize.
OK Mark/Space Folder Sync
OK Mark/Space MemoPad
OK Mark/Space Photos
This conduit cannot be synchronized because there are no writable calendars available to synchronize. To correct this, select a writable calendar in the conduit's configuration window.
No writable calendars exist
OK Mark/Space Tasks with 2 message(s)
OK Adobe Reader
OK Documents To Go
OK Note Pad
Anyone have ideas where the issue is?

If you want to use your back up you need to restore then entire Library from Time Machine, and then replace the damaged Library with it.
Regards
TD

I'm having trouble with calendars in mavericks

I'm having trouble with calendars in mavericks, its sluggis and the rainbow wheel of death comes up also. somebody help please

When you next have the problem, note the exact time: hour, minute, second.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-

Hi, everyone.
I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
Thanks,
Fabian Alberto Campo
MCT-MCSA 2012-MCITP365-MCTS
Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, Colombia

Hi Fabian,
Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
Actions pane to reset OWA virtual directory.
Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
Regards,
Winnie Liang
TechNet Community Support

Calendars and event data lost in mountain lion upgrade from snow leopard on mac book pro

I just upgraded to mountain lion today. It appears my contacts and emails were transferred without loss to the new system but all of my calendar data and the calendars themselves have disappeared. Does anyone know how I can get my old calendars and event data back? I backed up my laptop on time machine before doing the upgrade, so my old calendars should be on my external hard drive. I'd like to simple recover the data from the laptop if it is just hidden somewhere. Alternatively, if someone could tell me how to import the backed up calendars back in that might be a good plan B. I also still have the old calendars on my iphone which I am afraid to sync for fear of data loss.
I looked through previous responses in the community to this same question and I tried deleting the account and adding it back in but that did not work. Any assistance would be appreciated. Apple support is giving me an cold shoulder that is rather unexpected given my past good experience with Apple support. Bummin out over here
Aneata

Which way do you reinstall OSX?
I would go through the recovery partition, check Disk there and then run the installer. make sure you have a reliable connection the the Internet.
This could be a third party app you have running in the background that is crashing. what exactly is crashing ?
are you getting kernel Panics?
You are not able to simply roll back to Snow Leopard, you will have to have a SL disk, and then erase and install SL onto you hdd/ssd. This will erase ALL of your data so I hope you have a Time Machine backup or bootable clone.
I believe your issue is with a third party application installed.
More information is needed.
Call 1-800-My-Apple or file a dispute here https://expresslane.apple.com/Issues.action
On a personal note, I think you are missing out on ML and need to figure out if there is an application running that is causing ML to crash.
Usually a reinstall fixes my issues.

Lost all calendars and events

i tried to sync ical and a google calendar, and it worked for a bit, but then suddenly all my calendars and events disappeared.
now i cant even open the preferences window or add any events at all
when i double click on the "to do" section, i get a popup that says
"You can’t change events or to do items in the selected calendar. Only the calendar administrator and any delegates with permission can make changes to read-only calendars. To make changes to the calendar, contact the calendar administrator."
can anyone help me fix this? id like to recover my events and calendars

I've had the exact same issue -- I had calendars last week, now nothing (and I can't add any calendars, even though it's my home computer and I have the admin password, of course.) I thought it might have been caused by Yahoo!, Google, or my 3rd-party software (Missing Sync) but I think you have at least allowed me to narrow it down to Google.
Did you ever get your issue resolved?

I am having all kinds of trouble with itunes and updating my ipad. when I open up itunes, it seems to just sit there, never going to itunes store. when I connect my ipad, I check update and it starts, but then I get this message:backup can't be saved on

I am having all kinds of trouble with itunes and updating my ipad. I open itunes up but it doesn't do anything except open to a blank screen. I try to access the itunes store but it won't go there. When I connect my ipad, and try to update it, it starts and then I get a message that says backup cannot be saved on this computer. I have tried everything suggested to no avail. This is the 2nd or 3rd time I have had problems with itunes. Sometimes I even get a message that I am not connected to the internet.
I have uninstalled and re-installed. Any help?

You might not have enough space left on your hardrive.

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Hi FuzzyDunlopIsMe,
Welcome to the Support Communities!
It's possible that resetting your password multiple times has triggered this security. Click on the link below for assistance with your Apple ID Account:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Here is some additional information regarding your Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account.
Cheers,
- Judy

I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. Can I go back to the older version? I had no trouble with that and I do not like this new version at all.

I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. I went to the forums and tried all the suggested fixes but none worked. Can I go back to the older version? I had no trouble with that and I do not like this new version at all. I tried a system restore twice and it did not fix the problem.

I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet.

Trouble with Mail and Maverick

Trouble with Maverick and Mail - contacts (groups) will not load into address bar in mail.

Check that the mac's preferences for icloud is still connected to the proper account. Be sure photo stream is turned on.
You haven't described what "trouble" your mail account has.

Trouble with export and import

I am having trouble with export and import
here is what I did...
exp "'/ as sysdba'" PARFILE=parfile.txt
PAFILE
TABLES=user1.Table1
file=Table1_1006.dmp
LOG=Table1_1006.log
query="where to_char(processeddate,'YYYYMMDDHHMISS') between to_char(to_timestamp('1911-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS') and to_char(to_timestamp('2011-10-06 16:46:26','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS')"here is my log from export
set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
Current user changed to user1
. . exporting table Table1 16019049 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.Then I started importing
/database2/rdbm15> imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log
Import: Release 10.2.0.5.0 - Production on Thu Oct 6 19:57:01 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
. importing user1's objects into user1
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "Table1" ("APPROVALTRACEID" VARCHAR2(64), "REQUESTOR"
"EID" VARCHAR2(9), "EID" VARCHAR2(9), "FIRSTNAME" VARCHAR2(32), "LASTNAME" V"
"ARCHAR2(32), "MIDDLEINITIAL" VARCHAR2(8), "TIER" VARCHAR2(3), "JOBTITLE" VA"
"RCHAR2(64), "JOBCODE" VARCHAR2(10), "EMPLOYEETYPE" VARCHAR2(2), "CONTRACTOR"
"TYPE" VARCHAR2(2), "EMPLOYEESTATUS" VARCHAR2(2), "COSTCENTER" VARCHAR2(10),"
" "COSTCENTERDESCRIPTION" VARCHAR2(50), "CONTRACTENDINGDATE" VARCHAR2(8), "A"
"CCOUNTSTATUS" VARCHAR2(2), "LOGINID" VARCHAR2(70), "APPLICATIONGROUP" VARCH"
"AR2(50), "APPLICATIONNAME" VARCHAR2(50), "APPLICATIONID" VARCHAR2(12), "LEV"
"EL1" VARCHAR2(512), "LEVEL2" VARCHAR2(512), "LEVEL3" VARCHAR2(512), "LEVEL4"
"" VARCHAR2(512), "LEVEL5" VARCHAR2(512), "PROFILECODE" VARCHAR2(50), "PROCE"
"SSEDDATE" DATE, "APPROVERMANAGEREID" VARCHAR2(9), "APPROVERMANAGERDELEGATEE"
"ID" VARCHAR2(9), "APPROVERT4MANAGEREEID" VARCHAR2(9), "APPROVERT4MANAGERDEL"
"EGATEEID" VARCHAR2(9), "APPROVERAPPOWNEREID" VARCHAR2(9), "APPROVERAPPOWNER"
"DELEGATEEID" VARCHAR2(9), "PERFORMEREID" VARCHAR2(9), "NATIONALID" VARCHAR2"
"(30), "COUNTRYCODE" VARCHAR2(9), "PASSPORTID" VARCHAR2(20), "DATEOFBIRTH" V"
"ARCHAR2(15), "CITYOFBIRTH" VARCHAR2(15), "VENDORNAME" VARCHAR2(50), "VENDOR"
"MANAGERNAME" VARCHAR2(50), "VENDORMANAGERID" VARCHAR2(9), "VENDORADDRESS1" "
"VARCHAR2(100), "VENDORADDRESS2" VARCHAR2(100), "VENDORSTATEPROVINCE" VARCHA"
"R2(15), "VENDORCOUNTRYCODE" VARCHAR2(9), "VENDORZIPPOSTALCODE" VARCHAR2(9))"
" PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 4076863488 "
"NEXT 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) "
" LOGGING NOCOMPRESS"
Import terminated successfully with warnings.but I did not get rows to database2
[server1]database2
/database2/rdbm15> sqlplus / as sysdba
SQL*Plus: Release 10.2.0.5.0 - Production on Thu Oct 6 19:59:17 2011
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select count(*) from user1.Table1;
COUNT(*)
 0
SQL> exit
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - ProductionEdited by: user3636719 on Oct 6, 2011 5:23 PM

user3636719 wrote:
Thanks for the reply...
Old EXP IMP doesnt have capability to append the row, since you're using 10g use datapump instead. use option TABLE_EXISTS_ACTION=APPENDso my import should be like this
imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log TABLE_EXISTS_ACTION=APPEND
Did you look up the command line syntax and control options for imp?
You should make it a habit that whenever anyone - especially a stranger on the web - gives you a bit of code or references a command or init parm or any some such, the VERY FIRST thin you should ALWAYS do is look it up for yourself and see exactly where and how it is used and what it means. That is how you grow beyond having to be spoon fed every little thing and become more self-sufficient.
If you had, you would have seen that there is no TABLE_EXISTS_ACTION option for imp and seen that it is an option for impdp. And realized that exp and imp are NOT the same thing as expdp and impdp.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Confused with Calendars and TimeZones

Hi, I'll explain what I want to do. I have a table with several of what I call a "Time Ranges". Each Time Range has a day (day of week), beginTime and endTime. I also have different clients, each from a different country. Each client has a timezone associated (the format of this timezone is not defined just yet, but it should be something like -3, -4, +1, etc).
I want to get the current date, and be able to figure out if it is within a certain time range. For example, right now in Argentina is
11:48 AM GMT-3
This should match these time ranges:
11:00~12:00 | -3
10:00~11:00 | -4
13:00~14:00 | -1
And should not match this time range:
11:00~12:00 | -4
I'm trying to get the "current time for a certain time zone" with Calendar, and then be able to extract the time from that Calendar and compare it with my beginTime and endTime. I'm not getting anywhere.
Something like this:
Calendar cal = Calendar.getInstance(TimeZone.getTimeZone("GMT-08:00"));
System.out.println(cal.getTime());Is printing GMT-3 time. Please help.

manugarciac wrote:
Ok, I did it like this. The TimeRange Class has this method:
public boolean isActive(String timezone) {
Calendar cal = Calendar.getInstance(TimeZone.getTimeZone(timezone));
if (cal.get(Calendar.DAY_OF_WEEK) == this.day) {
Time time = new Time(cal.get(Calendar.HOUR_OF_DAY), cal.get(Calendar.MINUTE), 0);
return (beginTime == null || time.after(beginTime)) && (endTime == null || time.before(endTime));
return false;
}Timezone should come in this format: "GMT-04:00" and Time is java.sql.Time.
The only downside is that the Time constructor I used is deprecated. It says I should use the one that uses milliseconds since 1970. That kinda sucks, as I don't really care how much time passed since that time for this time. Any ideas of what I should use?forget java.sql.Time. use Calendar.set(int year, int month, int date, int hourOfDay, int minute) to set beginTime and endTime. use Calendar.compareTo(Calendar anotherCalendar) for the test.
Edited by: pete_d on Sep 10, 2010 3:09 PM
Not sure exactly what's going on in your TimeRange class but if the hour, minute, second and time zone in addition to the day of week (it seems that it does) for both begin and end time, then you can use this to create a Calendar instance to compare with the current time or to whatever other Calendar instance you want to check using its year, month day.

Trouble with calendar and events populating phone

Similar Messages

Maybe you are looking for