Trouble with call screen wallpaper
Greetings,
I just got an iPhone 5 and once I had sync'd the info from my old iPhone, I decided to change the wallpapers (both home and lock). This seemed to go fine until I noticed that when I received a call from a contact without an assigned photo, the call screen shows my old wallpaper. Is there a way to fix this? Thanks.
Reset all settings.
Settings>General>Reset>Reset all settings
Similar Messages
-
Having trouble with touch screen. Freezes, texting adds more letters, screen locks up. Got new phone, synced new phone and now it does the same thing??
I also tried the Hard Restart and still has the problem?
-
Having trouble with my screen becoming larger than my phone supports. Can this be corrected without taking the phone to an Apple store?
The sign on screen (where the current time and the slide to unlock) and if I can get it to open, the next screen that show all the apps. Have been unable to get any further that that second screen. The screen contents appear to be about twice the size they should be. I have been able to "reset" the phone by turning it off, but the problem happening several times a day and now occasioanally the reset does not work. This just started happening about 3 days ago and is increasing in frequency. I have had this phone about 14 months.
-
Problem with Call Screen and Leave Screen !
Hi,
I am calling Modal screen (Dialog Pop up screen) from my first screen by 'Leave to Screen 'nbr' ' then once user enter the value in the pop up screen then I haveto display value with TABLE in Final screen as 'Normal screen' here I am using LEAVE to SCREEN, but after this call - my new final screen is not displaying as noraml screen it also displaying like 'Modal Screen' Like big pop scrren.!!
When I tried final CALL by using CALL SCREEN instead of LEAVE screen the final screen with table is dispalying fine as Normal screen but its returning control to pop-up screen which I dont want.
I like Screen flow as 1>2>3--->1
Help me to solve this Problem.
Regards
JamesHi,
Check the below thread,
Unable to close Modal dialog box
1) 1st screen--> 2nd screen --> Use CALL SCREEN.(This is Modal Screen)
2) 2nd Screen-->(ModalScreen so you need come back) use the above thread
3) Still on 1st screen--> Use CALL SCREEN --> To 3rd Screen
4) 3rd Screen back to First Screen -> use LEAVE TO SCREEN First_Screen_NO.
Cheerz
Ram -
Hi everybody, I did work a program with Tx SE38, in the program I call a screen.
START-OF-SELECTION.
PERFORM completa_lista.
CALL SCREEN 0100.
END-OF-SELECTION.
The program run very well, but. When the program is in screen 0100 and push the button BACK or button EXIT. Don't return to program that called to screen 0100, always return to the program SAPMSSY0 and then push again the button BACK or EXIT to return the program that called to screen 0100.
This is my code in the PAI:
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'EXIT' OR 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.
I try with SET SCREEN 0. or LEAVE TO SCREEN 0. But always return to the program SAPMSSY0
Is there a way to skip the program SAPMSSY0?Hi ,
LEAVE TO SCREEN 0 will work in your case.
it comes back to the point from where it triggered screen 0100.
If you want to leave the program and come back to the easy access screen then you have to use LEAVE PROGRAM.
hope this helps!!
Regards,
Soumya Ranjan
Edited by: Soumya Ranjan on Dec 15, 2010 5:59 AM -
Trouble with Call Tranformation id_indent
Hello Guru,
Can anyone tell me why I'm having trouble with this.
" Convert xstring back into XML
CALL TRANSFORMATION id_indent
SOURCE XML gd_xstring
RESULT itab = <gt_itab>.
Exception : XSLT_BAD_SOURCE_CONTEXT
Regards,
KaisSorry buddy, I have been along way from home.
Can't remember how I solve it
Can you?
Probably, your string does contain some missleading characters. -
Anyone having trouble with full screen shortcut key?
For no reason, the shortcut keys for full screen window quit working. They started working after a reboot once but just quit again and restart did not correct this time. Quite annoying, any fix for this?
Hello nashvegasdj,
After reviewing your post, it sounds like you are having trouble with screen rotation. I would recommend that you read this article, it may be able to help the issue.
If the screen doesn't rotate on your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Earlier today my iPhone 4 stopped letting me make calls, receive calls, send or receive text messages. What do I need to do?
Hi maggiechester,
Let's find out what's going on! When did the problem begin? Current zip code? Do you have Post-Pay or Pre-Paid service? Are you having trouble with standard messages or iMessage? I look forward to hearing from you soon.
Thanks for your contribution to our community forums,
AyaniB_VZW
Follow us on Twitter @VZWSupport -
JFileChooser.showSaveDialog() to be displayed along with calling screen
hi,
i have a frame ,in that i placed many components,one of the component is Jbutton,when the user click on this button ,it calls JFileChooser.showSaveDialog() to save a file in local system.
After opening "file save window" , without clicking file save button ,if i open some other application(like WSAD,textpad) i am not able to see "file save window" until unless i search for that window by using "alt+tab".
here what i am trying to say is "file save window " always needs to be on top of its calling screen.
i even used JFileChooser .showSaveDialog(Component parent) ,but still that is not happening,if anyone come across this problem ,please help me.
thanks in advance..hi PhHein,
perfect answer.
Thanks for your reply,your answer made me think on my code .There was small issue in my code and its been resolved now. -
I have to use the speaker portion of my phone whenever I make or take a call. Sometimes the screen goes out as I'm trying to hit the speaker button. Does this happen to anyone else? And any suggestions how to stop this?
The iPhone is designed to have the screen go dark during a phone call, since the phone is normally up to your ear and you would not want to be touching the screen with your ear and possibly touching random buttons. This is done by the proximity sensor, which is located near the ear speaker on the phone. When you are reaching to turn on the speaker, it is possible that you are crossing this sensor light and it turns off the screen. I have done this before. If you try reaching from the bottom of the screen, does this still happen? Try to keep your hand away from the top front portion of the phone and see if that helps.
-
Have any of you had trouble with calls since updating to iOS 4.3.3?
Hi there everyone,
I recently updated my iPhone 4 (from ATT) to iOS 4.3.3 and suddenly I am having trouble making and receiving calls--I am not receiving a great majority of my calls and apparently it goes straight to voicemail. When I try to make a phone call, there is terrible reception and the call eventually drops --but the screen continues as if I am still talking to the person. I know it really isnt a problem with the network becuase a) I have full bars whereever I go, and b) Ive been using this phone for the past 9 months in the same area with no problem!!
Are any of you having this problem, and if so what is your remedy (if you have found one). Should I just take it to the apple store and see what they have to say?
Thanks!Did you get this resolved? I am having the same problem.
-
Trouble with calling a stored procedure with VARCHAR parameter from trigger
Hi everybody,
today I ran across a problem with stored procedures and triggers that try to call them. Background info: I want to log changes in certain tables to another table in a trigger, so I can replicate the changes to another (non-Oracle) database in an asynchronous way. As an example I have the first data table "bak_s3_berufliste" and the table to store the changes in is "bak_s3_change_request".
DROP TABLE BAK_S3_BERUFLISTE;
CREATE TABLE bak_s3_berufliste (
id_bl NUMBER(27,0) NOT NULL,
berufsbez VARCHAR2(255),
CONSTRAINT PK_BAK_S3_BERUFLISTE PRIMARY KEY (id_bl) ENABLE);
DROP TABLE bak_s3_change_request;
CREATE TABLE bak_s3_change_request (
ID_CR NUMBER(27,0) NOT NULL,
TABELLE_NAME VARCHAR2(50) NOT NULL,
TABELLE_ID_ALT NUMBER(27,0),
TABELLE_ID_NEU NUMBER(27,0),
CONSTRAINT PK_BAK_S3_CHANGE_REQUEST PRIMARY KEY (ID_CR) ENABLE);
DROP SEQUENCE seq_bak_s3_change_request;
CREATE SEQUENCE seq_bak_s3_change_request;
For testing purposes I created the following stored procedure and trigger:
CREATE OR REPLACE PROCEDURE schreibe_cr (t_id_alt IN NUMBER, t_id_neu IN NUMBER) IS
BEGIN
INSERT INTO bak_s3_change_request(ID_CR, TABELLE_NAME, TABELLE_ID_ALT, TABELLE_ID_NEU)
VALUES (seq_bak_s3_change_request.NEXTVAL, t_name, t_id_alt, t_id_neu);
END;
CREATE OR REPLACE TRIGGER trg_bak_s3_berufliste
BEFORE INSERT OR UPDATE OR DELETE ON bak_s3_berufliste
FOR EACH ROW
call schreibe_cr(:old.id_bl,:new.id_bl)
*... and everything worked perfectly - except from the fact that I need to know which table had changed of course. So I added another parameter to the stored procedure:*
CREATE OR REPLACE PROCEDURE schreibe_cr (t_name IN VARCHAR2, t_id_alt IN NUMBER, t_id_neu IN NUMBER) IS
BEGIN
INSERT INTO bak_s3_change_request(ID_CR, TABELLE_NAME, TABELLE_ID_ALT, TABELLE_ID_NEU)
VALUES (seq_bak_s3_change_request.NEXTVAL, t_name, t_id_alt, t_id_neu);
END;
and tested it:
CALL schreibe_cr('Test',1,2);
*... successfully. So I also added the parameter to the trigger:*
CREATE OR REPLACE TRIGGER trg_bak_s3_berufliste
BEFORE INSERT OR UPDATE OR DELETE ON bak_s3_berufliste
FOR EACH ROW
call schreibe_cr('Tabellenname',1,2)
and what i get is:
Error starting at line 31 in command:
CREATE OR REPLACE TRIGGER trg_bak_s3_berufliste
BEFORE INSERT OR UPDATE OR DELETE ON bak_s3_berufliste
FOR EACH ROW
call schreibe_cr('Tabellenname',1,2)
When I try to insert something into that table I get the following error:
insert into bak_s3_berufliste (id_bl, berufsbez) values (seq_bak_s3_change_request.NEXTVAL, 'tueduelue');
Error report:
ORA-00911: Ungültiges Zeichen
00911. 00000 - "invalid character"
Cause: identifiers may not start with any ASCII character other than
letters and numbers. $#_ are also allowed after the first
character. Identifiers enclosed by doublequotes may contain
any character other than a doublequote. Alternative quotes
(q'#...#') cannot use spaces, tabs, or carriage returns as
delimiters. For all other contexts, consult the SQL Language
Reference Manual.
Action:
I tried everything that came to my mind, like using double-quotes (") instead of quotes (') in the trigger code or escaping the quotes (\'), but nothing worked. Can anybody help my and tell me what's wrong? After googling for hours I'm outta ideas :-(
Any ideas appreciated!
Thanks in advance,
JensWhy?
Are you looking for this?
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:01.61
satyaki>
satyaki>
satyaki>create table aud_dup_emp
2 as
3 select empno, ename
4 from dup_emp
5 where 1=2;
Table created.
Elapsed: 00:00:01.86
satyaki>
satyaki>select * from dup_emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
9999 SATYAKI SLS 7698 02-NOV-08 55000 3455 10
7777 SOURAV SLS 14-SEP-08 45000 3400 10
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7566 JONES MANAGER 7839 02-APR-81 2975 20
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
7782 CLARK MANAGER 7839 09-JUN-81 4450 10
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
7839 KING PRESIDENT 17-NOV-81 7000 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
7876 ADAMS CLERK 7788 23-MAY-87 1100 20
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7900 JAMES CLERK 7698 03-DEC-81 950 30
7902 FORD ANALYST 7566 03-DEC-81 3000 20
9999 SATYAKI SLS 7698 02-NOV-08 55000 3455 10
7777 SOURAV SLS 14-SEP-08 45000 3400 10
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7566 JONES MANAGER 7839 02-APR-81 2975 20
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
18 rows selected.
Elapsed: 00:00:00.10
satyaki>
satyaki>
satyaki>create or replace procedure ins_aud_dup(eno in number, enm in varchar2)
2 is
3 begin
4 insert into aud_dup_emp(empno,ename) values(eno,enm);
5 end;
6 /
Procedure created.
Elapsed: 00:00:03.36
satyaki>
satyaki>
satyaki>
satyaki>ed
Wrote file afiedt.buf
1 create or replace trigger trg_aud_dup
2 before insert on dup_emp
3 for each row
4 begin
5 ins_aud_dup(:old.empno,:new.ename);
6* end;
satyaki>/
Trigger created.
Elapsed: 00:00:01.47
satyaki>
satyaki>
satyaki>select * from aud_dup_emp;
no rows selected
Elapsed: 00:00:00.10
satyaki>
satyaki>
satyaki>insert into dup_emp(empno,ename,deptno) values(8855,'BILLY',40);
1 row created.
Elapsed: 00:00:00.19
satyaki>
satyaki>commit;
Commit complete.
Elapsed: 00:00:00.03
satyaki>
satyaki>
satyaki>select * from dup_emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
9999 SATYAKI SLS 7698 02-NOV-08 55000 3455 10
7777 SOURAV SLS 14-SEP-08 45000 3400 10
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7566 JONES MANAGER 7839 02-APR-81 2975 20
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
7782 CLARK MANAGER 7839 09-JUN-81 4450 10
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
7839 KING PRESIDENT 17-NOV-81 7000 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
7876 ADAMS CLERK 7788 23-MAY-87 1100 20
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7900 JAMES CLERK 7698 03-DEC-81 950 30
7902 FORD ANALYST 7566 03-DEC-81 3000 20
9999 SATYAKI SLS 7698 02-NOV-08 55000 3455 10
7777 SOURAV SLS 14-SEP-08 45000 3400 10
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7566 JONES MANAGER 7839 02-APR-81 2975 20
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
8855 BILLY 40
19 rows selected.
Elapsed: 00:00:00.20
satyaki>
satyaki>select * from aud_dup_emp;
EMPNO ENAME
BILLY
Elapsed: 00:00:00.09
satyaki>Regards.
Satyaki De. -
Powerbook G4 17" troubles with the screen
Hello,
my powerbook G4 1,67Ghz seems to face a new problem.
When I open the screen, I must stop to open it half way, if I go to the normal way (90°) the light is very, very , very low (even black sometimes....)
Not easy to work with a 45° open screen....
Any idea on the problem ?
someone told me to open the computer and replace the inverter cable.....
Thanks for any help
FredSometimes your problem may also be:
1. The backlight. See http://www.ifixit.com/ on how to replace.
2. The PRAM battery. See http://www.ifixit.com on how to replace.
3. The "glossy" screen. Glossy screens don't do well with certain types overhead or light from behind you. They can be especially sensitive if there is a window to your side or behind you, or if the overhead light is flourescent, or if any of those directions the sun is shining. Matte and anti-glare screens have less difficulty on that account, though may still have issues if there is sun shining. -
Trouble with normal screen mode
My I phone has unexpectedly entered a mode that would appear to be useful for those with either blindness or severe sight problems. The screen does not work as normal on the slide to unlock. I have to double tap to get anywhere. I managed to get to settings but the scroll up and down does not work and I can't de-activate this mode. I don't know how the phone entered this mode. Can anyone help?
Hi, scoopincumbria.
Thank you for visiting Apple Support Communities.
This sounds like VoiceOver has been enabled. Here are the steps on how to disable this feature.
iOS: Configuring accessibility features
http://support.apple.com/kb/HT5018
Cheers,
Jason H. -
I own a Photosmart Premiyn c309g it's a touchscreen-well it's supposed to be! Quite often I can't get it to
touch on; which means I can't access the menu and thus can't copy or scan. Also, the on/off button has never
worked. Not sure if any of this is because of how I set it up. I have both usb and wireless hooked up.
I can get it to come on if I unplug and replug the unit; but, it hates this/I get a improper shut-down warning.
Please tell me how to fix this and/or how-to access the copy/scan possibly w/o the touch screen.Hello @Suz1st ,
Welcome to the HP forum.
I understand that your printers touch screen is not responding correctly.
I would like to help.
Step one: Turn the printer off and then on again
Step two: Connect the printer directly to a wall outlet
Unplug the power cord from any power strips or surge protectors.
Plug the power cord directly into a grounded electrical outlet.
Try again to use the touchscreen menu.
If the touchscreen responds when connected directly to the electrical outlet, do not reconnect the power cord to the power strip or surge protector.
Step three: Reset the printer
Press the Power button to turn on the printer.
With the power on, disconnect the power cord from the rear of the printer.
Wait 60 seconds.
Reconnect the power cord to rear of the printer.
Press the Power button to turn on the printer.
Try again to use the touchscreen menu.
I have sent you via private message with instructions for another reset.
Please read this post by Bob_Headrick before attempting the reset.
Printer Resets: What You Should Know
Also, here are some instructions for scanning from the software.
Scan from Windows 7 With the Full Feature HP Software for HP Multifunction Printers
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Maybe you are looking for
-
Problem with applications and accessing database
Hi I have a serious problem with my applications.I was trying to change "users"'s folder icon so I changed the setting in information.I don'y know what I did but It made these problems: many of applications does not open for example itunes-->The fold
-
How to find total size of RMAN backup files?
Hi there env: Oracle 10gR2, RHEL 64bit My client has a production database where rman backups are taken: Level-0 backup every Sunday and Level-1 Monday thru Saturday. I have very limited access to this production database because it is being managed
-
SG200-8 Static mac address problem
Hi! My second problem with sg200-08 (firmware: SG200-08x_FW_1.0.6.2.stk) is when I try to add specific MAC address as secure: MAC Address Tables - Static Addresses - Add; insert vlan id, port, mac address and select "Secure": I get error message: "Er
-
Sync the FS Item (CX 13) Master data in QA systems
I have requirement like this, Synchronize all new FS Items (T-Code CX13) from production to the QA and Development environments, on average there are approximately 20 new FS Items set up in a month. ( this is the reson to do this: The weekly job to u
-
Thousands of eventlog entries for Diagnosis-PCW
My event log is filled with thousands of these: Counter <#> of instance ({ecebd0ea-e19b-4208-afa0-6e4fd89ddfab}, VCPkg, 1) could not be modified. Error: "Element not found." I couldn't find anything relevant by searching. Anyone know what it is?