Trouble with camera hook up

I am trying to hook a JVC GR-HD1 camera to Final cut express HD. I can get the software to control the camera, but I can not see the video. Any ideas. I have tried with HD and SD video.
help.

I can not see the video and it will not let me capture anything. I can see the video in the camera, and I have control of the camera. When you click on capture, you just get black and a quicktime error of somekind
I will try your solution.
I thought it might have something to do with the cameras being HD.
I tried to can the set up to the HDV setup and it did nothing.

Similar Messages

  • Hi having trouble with camera roll photos - can not see them in i tunes

    Hi having trouble with camera roll photos - can not see them in i tunes. Is adobe photoshop the only program I can use?

    You don't see them in iTunes. In theory your computer should see the device as a camera and you should be able to transfer the photos in the same way as if you'd connected a 'proper' camera to your computer (this only applies to photos taken with the device or saved from emails/websites etc, it doesn't apply to photos that were synced from your computer). There is some help/guidance in this article for transferring photos to your computer : http://support.apple.com/kb/HT4083

  • Droid Razor - having trouble with camera focusing

    Is anyone else having trouble with their camera focusing?  A lot of my pictures come out blurry and out of focus.  Sometimes, it's like my camera focuses and then looses it as it snaps....am I doing something wrong?  Anyone?
    And I HATE the take button....wish it was on the top or something instead of on the screen.

    Are you using the stock camera app? There's a couple of things to be aware of. Make sure the focus square has turned green so that you know it's ready.  You can change the focus point in the stock camera app by touching anywhere on the screen.  Also, I have not found the zoom to be very useful - the pics are almost always blurry.  It's a digital zoom so imho you're better off to not use it and just crop the picture yourself.   It's the only thing I don't like about the camera/software.
    If you really hate using the button to take pictures, try another app like Camera ZOOM FX.   Many people prefer it to the stock camera app and there is a place in the settings where you can set it so tapping anywhere on the screen will take a picture, as opposed to being the focus point as it is in the stock app.
    Finally, I know it sounds basic, but be sure you have adequate light and try to not flinch when you press the take button.  The phone is so small that any movement like that will likely cause blur.   The other app I mentioned also has a stabilization setting, where it won't take a picture unless a certain degree of stabilization is present so you might also like that.  It does not have a video function however.
    Hope that helps.

  • Having trouble with camera profiles in LR3

    Anyone having trouble with accessing the camera profiles from the drop down menu in the develop module/camera calibration section of LR3? The only choice I have is "embedded." After I created a custom with passport color checker it now only offers "profile" as a choice. ANy thoughts?
    Thanks,
    Tom

    Okay, that is different.  I have seen a similar discussion in another thread (I think) in the Lightroom forum.  It might have been this one.  It seems to have been specific to Canon cameras.  I don't have an answer.  Just one question, however.  Are you using standard CR2 files, or are you using the sRaw format?  As I was reading the other thread, I was wondering if that could have been part of the problem.

  • Trouble with camera raw 6.7

    Hi everyone,
    I'm on Mac, Photoshop CS5,1 all updated ok.
    I have a new problem after processed an image from Bridge to Camera Raw, when I click "Finish" and I return to Bridge, it doesn't take into account changes made in Camera Raw and I do not have the 2 icons that tells me that the image was cropped and processed.
    I purged the cache for bridge, and  by running Bridge with the option key pressed, it still doesn't work.
    Sometimes it works once time, other times it is necessary to restart the computer.
    I completely uninstalled and reinstalled Photoshop from the DVD the problem persists
    Has anyone had this problem ? any solution ?
    Best regards
    Pascal

    How did you get the software to install it?  Via the Help - Updates menu in Photoshop?
    -Noel

  • Trouble with Camera Raw Plug-in

    Hello, Can someone please help...I just started shooting in RAW and have installed the Adobe Camera Raw Plug-in with DNG Converter version 4.6 for Photoshop CS3, but still cannot open my .CR2 files!  They are filed under:  Adobe Photoshop CS3/Plug-Ins/File Formats.  Could the problem be that it's filed incorrectly?  Do I need to do something else other than choosing "Open" under the File menu in Photoshop?
    Thanks for any help you can provide?

    No, no, no!
    autumnhill wrote:
      And I'm using Mac OSX so Camera Raw was filed correctly.
    No, I'm also running Mac OS X, and the screen shot shows the ONLY correct location.
    Quit Photoshop AND Bridge, put the ACR plug-in in the correct location, then re-launch both Photoshop and Bridge.
    You will probably need to Purge the Cache through the Tools menu in Bridge for each folder containing raw files.
    Where you put it, Bridge cannot see it, and it will cause you performance problems and give you all kinds of grief later on.
    autumnhill wrote:
    …so I moved it back and everything is ok.  However I did move the DNG converter to your suggested location.
    That was a monumentally… err… …unwise move.  Undo it ASAP.

  • Trouble with camera roll, pic transfer to iPhoto since update to ios 5.

    since I updated to ios 5; when I take a picture it goes to the bottom left corner as before but when I click on it, it opens and shows a 'saving' icon that never goes away. I now have 'albums' that show 'camera roll' and 'photo stream' but neither of these show up in my iPhoto when i connect my phone to my Mac. I am running iPhone4 with ios5 and iPhoto 8.1.2

    I turned off photo stream and now if I take a picture it doesn't go into old camera roll where all my other pics are ... it has created another camera roll that only appears from the camera screen and I am unable to do anything with them...when I touch the screen it starts the 'neverending save icon'...help!

  • Help! Having trouble with camera app after update to iOS 5.1.1

    I'm having a big problem with my Itouch. I've never jailbroken it or any of that crap. Here's the deal. I just updated to 5.1.1 and I tried to record a video but whenever I press the record button it starts recording but can't press it again to make stop. So, press the menu button then I tried going back to the camera app then I hit record now this time it just freezes!!!!!  

    My IPhone 5 camera is locked after the new update!

  • Trouble with camera roll to iphoto

    Hi,
    Question i have is...
    If I have a picture in the camera roll on my iphone.  And it is not in the Photo Stream.  How do you get the picture into your iPhoto?  do you have to connect the iphone to mac (using USB) and import it?
    Thanks and I look forward to your reply.

    You are on the right track.
    Here are the steps:
    http://support.apple.com/kb/HT4083?viewlocale=en_US&locale=en_US

  • HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

    Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
    Hi all,
    When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated.  However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
    Thank you!
    HN

    Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG?  Show the same area of the photo and zoom to 100%.
    It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
    The amount of grain depends on the ISO sensitivity setting on the camera.

  • I'm having trouble with video imported from my camera memory card.

    I'm having trouble with video imported from my camera memory card.The video breaks up and pixelizes when it's directly imported from the memory card. That makes the video useless. Why does this happen? It doesn't do that in any other video editing software. Thanks for the help.

    More info please:
    Type of camera?
    Was the card formatted in the camera doing the shooting?
    Type of files the camera is set to record?
    Al

  • Im having trouble with my email. usually i drag emails i want saved to various folders. recently, some of the folders have changed their appearance - looking like a camera body, and less like a folder. these icons seemed to be locked as well, so i can no

    im having trouble with my email. usually i drag emails i want saved to various folders. recently, some of the folders have changed their appearance - looking like a camera body, and less like a folder. these icons seemed to be locked as well, so i can no longer open those folders. help please?

    Ah, now i see that the folder has an icon on it - like a "settings" icon - sort of a wheel

  • Trouble with split into clips when importing from camera

    I'm importing old video from mini DV tapes into iMovie. Unlike many other people writing here, I'm not having trouble with the connection between the camera and the computer. That works fine. I click "import" and the video IS imported.
    The problem is, iMovie splits up the video it loads into little clips, some are long and some are less than a second long. Then, when it displays them in the clips window, they are out of order. For instance, the first few bars of a song might be pulled off and be in a short clip near the bottom of the list while the rest of the song is in a longer clip near the top. As a result, I am forced to carefully put them back in order -- like making a jigsaw puzzle -- as I drag them into the project.
    Can I either turn off whatever it is that splits the input into clips (I'd like just one big clip) OR at least could the clips be displayed in the order that they were loaded from the camera so that clips that belong together are next to each other?
    Thanks (and sorry for asking what is PROBABLY a dumb question),
    ak

    The best answer I've found so far to my own question is the post from Randman here:
    http://discussions.apple.com/thread.jspa?messageID=9007098
    As he points out, the problem is that iMovie is splitting and ordering the clips by their "time stamp", but if the video was previously edited (even by iMovie itself!) this time stamp may reflect the time it was edited rather than the time it was filmed. This is especially a problem for clips that have a title or special effect used on PART of it, because the modified part does not show up anywhere near the unmodified part in the list of clips.
    Randman ALSO provides a sort of solution: rename the files themselves. I found this did work. (You rename them so that time stamps in the filename are in increasing order when listed in order by "last modified" which reflects the time they were loaded from the camera!)
    I've written myself a script to do this automatically, but it is a bit of a hack and not really suitable for distribution. But, I suggest that someone with more time and programming experience than I write such a script that would help people with this problem!

  • Trouble with Benq DC C 700 digital camera on Satellite L30 105

    Hello
    I'm having trouble with my digital camera when I connect it to my laptop. Every time I connect the camera the laptop freezes and gives me the blue screen of death, that is, the screen you get when a fatal error occurs, and then my laptop has to be rebooted. So this happens each and every time I connect the two.
    I've tried updating the bios and installing the latest drives but nothing seemed to work. I've contacted the support center at Benq and they told me to contact Toshiba as they are pretty sure the problem is not with the camera. So please anyone, if you have any ideas and or suggestions/solutions I'll be glad to hear them out.
    Thanks!

    Hi
    First of all if you need the Toshiba support you have to contact the Toshiba authorized service partner in your country. This forum here is only a user-to-user forum and you will not find anyone from Toshiba here.
    Secondly;
    It seems the Satellite L30-105 was delivered with Vista. Do you use this OS on the L30?
    I have read about many issues with the 3rd party devices, software and Windows Vista.
    I dont know what the guys told you but possibly the webcam software is not 100% compatible with Vista.
    You should know that the BSOD appears if there is a serious software or hardware problem. I dont think that this issue was caused by a hardware problem and therefore there is only one possibility; software compatibility issue.
    In you case I would update the Vista to the latest state and would ask the webcam manufacture if its 100% compatible with Vista.
    Good luck

  • I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

    I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

    Shootist007 wrote:
    Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
    It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
    Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
    My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
    Chiara, sorry for hijacking your thread.

Maybe you are looking for