Trouble with Canon 2020Adv after upgrade to Maverick

Hi
We've just upgraded to Maverick and our office Canon 2020Adv no longer even acknowledged print jobs sent to it from the Mac.  I followed the comments in earlier posts re problems with Canons post Maverick upgrade and downloaded and installed the new driver.  Now I can get the printer to acknowledge that a doc is being sent but it either printer gobbledygook (sorry don't know a better word for it...) from Word or takes forever "processing" and never actually prints anything from Safari....
Any suggestions??
Thanks

Two possible causes for the issue you are having.
1. You are using the Postscript printer driver but your iR ADV C2020 does not have the optional Postscript printer kit. In that case, download and install the UFR 2 v10.3.0 driver
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
2. If you are using the UFR2 driver already, you may have created the print queue using the IPP protocol. The UFR2 driver does not support this. So remove the ADV C2020 from Printers & Scanners and add again, this time selecting HP Jetdirect-Socket for the protocol.

Similar Messages

  • Anyone else having trouble with missing ringtones after upgrading to 8.1.1

    Anyone else having trouble with missing ringtones after upgrading to 8.1.1?

    Try resetting the keyboard dictionary
    Settings>General>Reset>Reset Keyboard Dictionary

  • Is anyone having trouble with accessing email after upgrading to iOS 6?

    Is anyone having trouble with accessing email after upgrading to iOS 6?

    Is anyone having trouble with accessing email after upgrading to iOS 6?

  • Is anyone having trouble scrolling with your mouse after upgrading to Mavericks

    After I upgraded to Mavericks my mouse seems to just time out and not work. I can point and click and that works fine but the scrolling is terrible. Just stops working.

    Mavericks issue.  See more like this at right.

  • Can't print to Canon IPF610 after upgrading to Mavericks. HELP!!

    Since updateing to the OS 10.9 Mavericks, I am no longer able to print to my Canon IPF610 Large Format Printer. I tried upgrading the driver at the Canon website for the OS 10.9 but it's still not working.

    I already know about this and this solved my problem 2 years ago when I hooked up the printer for the first time. Now after installing the Mavericks update, it keeps saying the printer isn't connected. I tried using a different ethernet cable, unplugging and plugging printer back in and still the same problem. I can still print to it from my old Apple G5 tower using 10.5.8 and was even able to print with no problems on my Intel iMac using the 10.8.  I installed the updated driver for 10.9 on Canon's website and still get the same problem.

  • Trouble with booting system after upgrade udev= systemd

    Hi everybody,
    I have been trouble with my system since last upgrade (udev => systemd)
    My issue is something like this: https://bbs.archlinux.org/viewtopic.php?pid=1106157 but advice from this discussion doesn't work.
    When system booting, *immediately* (very fast, too fast) display login screen after start parsing hook [udev]
    Of course, i can't login - type username and i have redraw screen again on all /dev/tty* - i have no chance to type password.
    Many invalid logins suspend init for 5 minutes and allow me see display error due stop redraw screen - libpam.so.0 cannot find.
    I suspect that, partitions aren't mount (this fast login screen doesn't have even hostname). I have a 4 discs, with many partitions - mounting
    this take a some time (+- 5 secs).
    In rescuecd, i can mount all partitions and chroot. In chroot all works fine - /bin/login (i was checked authorization on all users),
    paths and pams are ok. Of course i try ,,default rescue trick'': `pacman -Suy linux udev mkinitcpio` and 'mkinitcpio -p linux' on rescuecd
    but nothing it's changed after reboot. I checking grub config, and unpack and check initramfs-linux.img - all ok.
    In my mkinitcpio.conf ofcourse i have MODULES="ext3" (for my filesystems).
    Please help.

    crab wrote:
    This may or may not be related... but I saw this message just now during an upgrade:
    (121/168) upgrading mkinitcpio [###################] 100%
    ==> If your /usr is on a separate partition, you must add the "usr" hook
    to /etc/mkinitcpio.conf and regenerate your images before rebooting
    And am wondering what the message means by if /usr is on a separate partition - separate partition to what?  /boot? / ?
    I have my /usr partition in the same partition as /  (but /boot is in a different partition)
    Logic tells me I'm safe (haven't rebooted yet), as / is "master", and anything else is a separate partition, and I have /usr on the same partition as /.
    Do you guys have separate /usr and/or /boot partitions?  As stated in first sentence this may not be related, but looks important...
    It means separate from /. So yes, you're right, you are "safe" from having to do anything with this message on your system.
    And to the other people on this thread: make sure you do have all your packages uniformly updated, including any pam-related AUR or ABS-build packages. libpam and the pam module directory (.../lib/security) were moved from /lib to /usr/lib a little while back, so make sure that anything that cares about where these may be have been updated so they aren't confused by this move.
    Last edited by ataraxia (2012-06-03 22:40:22)

  • Issue with multi-monitor after upgrading to Mavericks

    I ran Mountain Lion OS on my MacBook Pro along with VMWare Fusion 5 with an extra monitor and everything was working fine till I upgraded to Mavericks. Since then, I am not able to see the 2nd monitor in the Extended Mode.
    on Apple, everything is work and I see two monitors and can move one window from one display to another but when I open my Windows in Fusion, only one display is accessible (the 2nd display showing Apple screen, which wasn't the case before). Even I can see that the color settings I had done before for my additional monitor is not in place after upgrade.
    I have checked my WIndows and settings are fine as it was before. It's Windows 7 Pro. I read some articles that I have to upgrade to Fusion 6 and some others that mentioned this is an issue with Mavericks and upgrade won't fix it. So, I am looking for some advice or similar experince, if any.
    Thx in advance for your help.
    Behzad

    Update: I can see that Windows act as it is two displays but the 2nd display is in nowhere and I cannot see it. I mean the window can go out of my normal display (i.e. my laptop) but not to the other monitor. That's why I have to disconnect the 2nd monitor and only use laptop display.

  • Unable to print with Canon iR2018 after updating OsX Mavericks

    Hi,
    there's anybody who can help me in finding canon ir2018 drivers for osX Mavericks?

    Here is a link to the Canon UFR2 v10.2.0 driver that supports your iR2018 on OS X 10.9.
    Please note that when adding the network printer you must use the LPD protocol and select the correct printer model, which will be listed as "Canon iR2018". Do not select the iR2018 that shows UFR II in the model name as this will be for the older v2.43 driver which is not compatible with OS X 10.9.

  • Mail app constantly synching with iCloud server after upgrade to Mavericks

    Since upgrading to Mavericks, Mail has been constantly synching with the iCloud server - and I mean constantly. I know this because I have the Activity window open. Consequently there is often a significant lag between clicking Send on a new message and it being sent, or new messages being downloaded. I have another iMac at my office and the same problem is being experienced there.
    I left the computer running all night to see if it would eventually sych everything, but it seems to be going in a constant cycle ever since the upgrade.
    If it means anything to anyone, the Console window displays a continuous stream of data similar to this:
    9:24:37.448 am fseventsd[48]: implementation_added_client : failed to add client for path /Users/Kevin/Library/Mail/V2/AosIMAP-kbish…
    9:24:37.449 am fseventsd[48]: implementation_register_rpc: implementation_added_client() => 22
    9:24:39.808 am fseventsd[48]: implementation_added_client : failed to add client for path /Users/Kevin/Library/Mail/V2/AosIMAP-kbish…
    9:24:39.809 am fseventsd[48]: implementation_register_rpc: implementation_added_client() => 22
    Can anyone offer any advice on what the problem might be and how I might fix it.
    Thanks,
    Kevin

    No solution here, but I have either the same or a similar problem. Apple Mail with Gmail (IMAP) used to work fine with Mavericks.
    Now with Yosemite most emails load ok, but some show the spinning wheel and "Loading..." message forever. These messages never load.
    I also have Thunderbird and it loads and shows these messages just fine. The messages that don't load in Mail are simple plain text messages so it's unrelated to complex attachments and such.
    Clearly something is broken in Yosemite that wasn't broken in Mavericks.

  • Problem with Hp printer after upgrade to Maverick OS

    Scan pages, when saved to computer when click to save the pages and try to open saved documents their all black and have lines on them.( upgraded to mavericks OS) , before upgrade, the printer was working fine.
    Mac 27-inch, Late 2009
    HP Photosmart Premium Fax e-All-in-One Printer - C410a

    Try a reset  >  OS X Mavericks: Reset the printing system

  • Problem with shared printer after upgrade to Maverick

    Hi Guys,
    I have one iMac and two windows PC which connect to the same WiFi router.
    The iMac has a HP LaserJet CP2025 attached to its USB port and shared with other windows PCs with no problem.
    Until I upgrade my iMac to Maverick recently, now those PCs cannot see the shared printer anymore.
    Do you have any ideas what configuration is changed in the Maverick which could cause this please?
    I have been searching through Apple communities and other tech forums and have tried many solution, but still cannot solve this. (I have also tried setting up LDP, but no luck so far)
    PS ... Shared files seems to work fine. I can access (read/write) the shared files/folders from windows with no problem (SMB and AFP enable).
    Any ideas, pointers or links would be appreciated.
    Cheers,
    ChaaPru

    Try a reset  >  OS X Mavericks: Reset the printing system

  • Any experiences about troubles with ipad 2 after upgraded to IOS7?

    Hello everyone! I've read in several blogs and websites warnings about possible problems or slowdowns of IPAD2 after the upgrade to IOS7. Has anybody decided to "challenge" these warnings? If yes, have you have any problems or is everything going ok?
    Thanks!

    I upgraded to ios7 on my ipad2 (Model MC773LL/A) and was very happy with it despite some minor quirks until the 7.0.2 update.  Since then, I can't use the home button.  It worked just fine and I was even able to make it work after a couple of resets, but as soon as I open the first app, it no longer works.  Since the 7.0.3 update which I expected to fix the problem, I can't even get the home button to work after a reset.  This iPad2 is pristine and had been cocooned in my Griffen rubberized case since the day it was unboxed. (yes, I took it out of the case since to make sure it wasn't the cause)
    While I can use all the other tricks such as assisted touch or gestures, it just ticks me off that the home button doesn't work any longer.  Since I am out of warranty, I don't want to waste my time waiting on line to get them to fix something they broke and being asked to pay for it.  The button worked fine until the iOS7 upgrade and there is no reason why it shouldn't work today.
    My iPad Mini (Model MD528LL/A) appears to be working just fine with iOS 7.0.2, though a bit slower than when it was 6.1.3.  However, it seems that since 7.0.3 broke my iPad2 further, I am hesitant to even consider blowing up my iPad Mini as well.  My iPhone 5 is working really well on iOS 7.0.3...thank goodness.
    I agree with the many comments about the loss of Steve Jobs... Tim, you better get these thing straightened out or that iPhone 5 will be the last Apple product I purchase. Kwon Oh Yun and Risto Siilasmaa are looking pretty innovative these days!

  • Problems with Canon ip4200 after upgrading from panther to tiger.

    Hello
    I have recently purchased a lovely new imac 24", everything is great apart from my my printer which is now printing pictures with a lovely magenta cast over all my photos.
    From googling around I think it might something to do with having a double printer profile on? But the actually printer doesn't seem to have much options to play around with.
    If anyone has any idea of what's happening or how to sort this out I would really appreciate it as after MANY hours of googling I am now totally perplexed!
    Thanks
    Rosie

    Hello Rosie,
    For starters, please ensure you have the latest driver for the iP4200 installed. You can get this from the Canon Europa web site. The version is 4.8.3. With the new driver available, follow this procedure to remove any previous version before installing this later version.
    1. Open Printer Setup Utility, delete the iP4200 queue and then click on Printer Setup Utility and select Reset Printing System.
    2. Close the Printer Setup Utility.
    3. Go to Library > Printers > Canon and delete the contents of the BJPrinters folder.
    4. Go to Library > Receipts and delete the file Canon iP4200 xxx.pkg
    5. Empty the Trash
    6. Restart the Mac
    7. Install the latest version of the Canon driver (4.8.3)
    8. Once the driver installation is complete, go to Applications > Utilities and open Disk Utility. Run the Repair Disk Permissions option.
    9. Open Printer Setup Utility and click Add.
    10. Select the Default Browser view and select the Canon printer connected via the USB port. The Print Using menu should automatically change to Canon IJ Printer.
    11. Click Add to add the printer.
    With this latest driver installed, print your photo and check your output. If there is still a magenta tinge, open the driver settings and select Quality & Media. Try a different media type, such as Photo Paper Pro, and also set the Print Mode to the photo setting. If you are printing from iPhoto, then open Color Options and ensure you have the Color Correction set to BJStandard.
    If you are printing from PhotoShop, then open Color Options and ensure that Color Correction is set to ColorSync so that the ICC profile associated with the paper type selected above is used.
    If you want to check the gamut of the respective paper types/profiles available to the printer, you can open the ColorSync utility and expand Others > /Library/Printers/Canon/BJPrinter/...Here you will see the available profiles for the respective Canon paper stocks and their colour gamuts. The MP settings are Matt Paper, PR is Photo Paper Pro and SP is Photo Paper Plus Glossy.

  • Airplay no longer working with 3rd party after upgrading to Maverick.

    I updated my MacBook Pro this week and I have noticed that the airplay icon is no longer showing up in iTunes to connect to my Denon Amplifier. The interesting thing is that my old iPad 1 that I have that is still running 5.1.1 can connect and play to the receiver just fine.
    Was there an update to the airplay software that would affect 3rd party devices? I was not able to find any new updates for my receiver.

    I woke up this morning with the same problem (all was fine last night).  Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me).  All appears okay so far today (except some of my accessories in the menu bar are gone). 
    I sure hope an update comes SOON.  In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

  • Trouble with screen sharing since upgrading to Mavericks

    I'm no longer able to connect to my Mac at home from my Mac at work unless someone is there to wake it up. It shows up in the shared listing on the left side of my Finder window so I know it sees it. I get a "Connection Failed" warning.
    I have made sure that Screen Sharing is selected and that I have selected "Wake for network access" on the Energy Saver system preferences. Computer sleep is set to "never". I have also set it to start or wake at 8am every day to ensure that it is running each day by the time I get to work. Both Macs are running Mavericks.
    I didn't have this problem with 10.8 and nothing else has changed that I know of. If someone is home and I call them and tell them to wake up my Mac it works fine, for a while. For a couple of hours I can connect to it but then it disconnects in the middle of using it and I can't connect to it again.
    And regular ol' "Connect As" no longer works either ... unless someone is at home to wake it up. I get a "probelm connecting to the server" warning
    Thoughts or suggestions?

    I'm no longer able to connect to my Mac at home from my Mac at work unless someone is there to wake it up. It shows up in the shared listing on the left side of my Finder window so I know it sees it. I get a "Connection Failed" warning.
    I have made sure that Screen Sharing is selected and that I have selected "Wake for network access" on the Energy Saver system preferences. Computer sleep is set to "never". I have also set it to start or wake at 8am every day to ensure that it is running each day by the time I get to work. Both Macs are running Mavericks.
    I didn't have this problem with 10.8 and nothing else has changed that I know of. If someone is home and I call them and tell them to wake up my Mac it works fine, for a while. For a couple of hours I can connect to it but then it disconnects in the middle of using it and I can't connect to it again.
    And regular ol' "Connect As" no longer works either ... unless someone is at home to wake it up. I get a "probelm connecting to the server" warning
    Thoughts or suggestions?

Maybe you are looking for