Trouble with Canon MF4370dn and Safe Mode

This printer is a real bear.
Thanks to other folks' work here, I was able to get this printer properly installed and working in Safe Mode (printing and scanning), but as soon as I restart and attempt the same operations in "regular mode," I get stuck. Printing results in "Could not open printer" error. MF Toolbox launches but won't recognize the scanner.
Printer is connected directly to Mac mini running 10.6.6 via a single usb cable. No hubs or extensions.
So what could be interfering after rebooting out of Safe Mode? So strange to me (and more than a little frustrating).
Thanks much for any help.

What third-party extensions or drivers do you have installed, say for other peripherals, prior printers/scanners, or incompatible plug-ins such as preference panes, startup items, etc. Check for anything that is disabled in safe mode.

Similar Messages

FireFox 4 Crashes When Started (Both Normal and Safe Mode)

When I open up FireFox 4 (both in normal mode and safe mode) it crashes within a few seconds. It is a fresh install of FireFox 4 but I also have FireFox 3.6 installed as well. The report that was given is:
Add-ons: [email protected]:1.0.6,{5F590AA2-1221-4113-A6F4-A4BB62414FAC}:0.45.6.20100202.1, :1.2,[email protected]:1.0rc1,{8545daff-ad1e-493f-a37e-eed1ac79682b}:1.0,[email protected]:6.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:4.0b1
BuildID: 20100630141702
CrashTime: 1279002364
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1278990773
ProductName: Firefox
ReleaseChannel: beta
SecondsSinceLastCrash: 38
StartupTime: 1279002344
Theme: classic/1.0
Throttleable: 1
URL: http://en-us.start3.mozilla.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
Vendor: Mozilla
Version: 4.0b1
I have Windows 7 32bit

1. You have a pre-release Beta 1 version of what will become Firefox 4 in like 5 or 6 months. Unless you are intending to test it for flaws and report those flaws to help in the development process, don't use it.
2. Did you create a new Profile for 4.0b1, and are you using that Profile with it? ''That isn't done automatically when you install 4.0b1, and those of us who have been doing the "testing" for many years consider a new Profile as the basis of doing out testing.''
[http://support.mozilla.com/en-US/kb/Managing+Profiles]
IMO, Mozilla is making a huge mistake by directly offering these beta versions to the general public.
Also IMO. if you want to play with 4.0b1, use the Portable Firefox 4.0beta version to minimize any conflicts with a currently installed version of Firefox, and to eliminate the need for creating a new Profile for 4.0 Beta #:
Download Firefox Portable Test to your hard drive and double click the '''FirefoxPortableTest_4.0_Beta_#_English.paf.exe''' file. The entire installation (including a new Profile for "Portable") will be self-contained in the \Program Files\FirefoxPortableTest\ folder and won't interfere with an "official" version that you already have installed. Your Profile will be in the \Program Files\FirefoxPortableTest\Data\profile\ folder.
The "down side" is that Firefox Portable won't launch if any other version of Firefox is already running.
[http://portableapps.com/apps/internet/firefox_portable/test]

At odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

at odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

That second one sounds like malware.
Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Firefox 19 crashes on startup in normal and safe modes.

upon startup, ff19 crashes in both normal and safe modes. I've disabled all add ons and extensions.
XP Pro sp3.
It started crashing occaisionally, then increasingly more often, now, upon startup.
I tried reloading ff19.
I can't start ff with the -p command.
Crash ID: bp-89fc95f5-6efb-4c72-8721-fbf1b2110906
1361302409
1360392309
1358921494
1357934458
1354939166

its not correct crash id.
We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
#In that text field, enter %APPDATA% and press Enter. An explorer window should open.
#From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
#Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
#Open the most recent 5 files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

TS1702 Problems with the app Drive Safe Mode.

Have other users experienced problems with the app Drive Safe Mode? I can't use it, it's frozen, doesn't do anything at all. I use an iPhone5. I shut off the phone twice, I uninstalled the app and reinstalled it, nothing works. Tks for your help,
samwise57

Contact the app's developer. Apple does not provide support for apps purchased from the iTunes Store except the ones they provide like iWork apps.

Suspend firefox menu and safe mode

I would like to use Firefox to run my application, but do not want user save data by Save as function, how can I suspend whole menu and safe mode? Many tks!

Hi junior08,
Sorry I am not sure I understand what you are attempting. Perhaps you would explain in more detail.
*You have an application
** Is this something you have coded yourself ? or is it something you have downloaded ?
* The USER
** Is that you ?
** Someone else using your computer ?
** Or some other user with their own device and their own Firefox
* DATA what is this ?
** which device is this on ? (If it is on the users own device they would already normally have access to the data one way or another)

Firefox 18.0.1 consuming excessive CPU--both in Standard and Safe Mode--when accessing Gmail

Firefox 18.0.1 consumes excessive CPU--both in Standard and Safe Modes--when accessing Gmail (in Standard Mode). CPU consumption averages around 56% on my dual-CPU, Windows 7 desktop.
The only way to stop this from happening it to open Gmail in "HTML" mode. When I open Gmail in Standard mode, a "Loading..." status shows at the top of the page. After about 30 seconds, a error window pops-up within the Gmail page saying that there is a performance problem and provides the option to load Gmail in a limited, "HTML" mode. Clicking the HTML Mode link solves the issue. I've been using Firefox for years and have never seen this issue until now.

try this link
*https://support.mozilla.org/en-US/kb/firefox-uses-too-many-cpu-resources-how-fix

Trouble With Opening InDesign and now Photoshop and Illustrator

First off I apologize if this isn't in the correct section. I couldn't find a section specific to my problem since it involves multiple aspects of Adobe products. I was having trouble with InDesign, it kept crashing. So I followed all of the advice I could find on the forums about deleting the preferences and cache information in the Library folder, and that didn't seem to make a difference. So then I thought maybe it needed an update, so I logged into Adobe Application Manager and sure enough, it did. So I clicked on "download" and it stalled there too. Then the manager became unresponsive. I couldn't cancel the update or log out or anything. So then I saw in the forum someone suggested the Adobe Creative Cloud Cleaner Tool if your manager becomes unresponsive. I ran that and then shut my computer off. When I turned it back on, InDesign started working BUT my Photoshop is completely gone from my system (I never messed with it in the first place since I wasn't having any trouble with it.) And the when I tried to click on Illustrator it said "Do you want to begin your trial?" Huh?
I have had a subscription since 2012, why on earth would it suddenly think that I no longer should have access to these programs? If I log on to my Adobe account it shows my subscription and that it's up to date (last payment was April 5, 2015). The versions I was using were the CS versions that I had downloaded directly from Adobe and when I used to have any trouble or when I got a different computer I could just log into my account and then redownload them. They are no longer showing under my products, so I can't figure out what on earth is going on. The website has changed since the last time I downloaded them, so that partly could be me, but I thought they would at least be showing up under products. I contacted Adobe support and the first person I talked to on chat said "this is clearly a technical issue I am transferring you to someone better suited for this," but that's all he said. And I haven't heard from anyone since so I thought I'd make a topic and see if anyone else out there has had a similar problem.

The versions I am using are the CS6 versions.*

Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T

Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T
I am having trouble making outgoing call or answering incoming call.
When I try to call out from my IP 7961 phone, it fails with the message "unknown number".
For incoming call, it rings but when I pick up the call nothing happens,
Put the receiver back on hook, the phone carries on ringing. I am in UK
and just trying to set up test system with one analogue line. Any help will
be most appreciated. My config of the 2811 router is posted below. All calls ineternally works fine.
Thank you for your help.
hostname Test-CME
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1 10.10.10.10
ip dhcp excluded-address 10.139.139.1 10.139.139.10
ip dhcp pool host
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
option 150 ip 10.10.10.1
ip dhcp pool data
network 10.139.139.0 255.255.255.0
default-router 10.139.139.1
dns-server 10.139.139.5
voice-card 0
no dspfarm
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
sip
header-passing
registrar server expires max 3600 min 3600
interface FastEthernet0/1
no ip address
no ip mroute-cache
duplex auto
speed auto
no shut
interface FastEthernet0/1.2
description ** Data VLAN **
encapsulation dot1Q 2
ip address 10.139.139.1 255.255.255.0
interface FastEthernet0/1.3
description ** Voice VLAN **
encapsulation dot1Q 3
ip address 10.10.10.1 255.255.255.0
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
tftp-server flash:S00104000100.sbn
tftp-server flash:TERM41.7-0-3-0S.loads
tftp-server flash:term61.default.loads
tftp-server flash:term41.default.loads
tftp-server flash:CVM41.2-0-2-26.sbn
tftp-server flash:cnu41.2-7-6-26.sbn
tftp-server flash:Jar41.2-9-2-26.sbn
tftp-server flash:term70.default.loads
tftp-server flash:term71.default.loads
tftp-server flash:cnu70.2-7-6-26.sbn
tftp-server flash:Jar70.2-9-2-26.sbn
tftp-server flash:TERM70.7-0-3-0S.loads
tftp-server flash:CVM70.2-0-2-26.sbn
control-plane
voice-port 0/3/0
connection plar opx 202
caller-id enable
dial-peer voice 1 pots
incoming called-number .
destination-pattern 9T
port 0/3/0
telephony-service
load 7914 S00104000100
load 7941 TERM41.7-0-3-0S
load 7961 TERM41.7-0-3-0S
load 7970 TERM70.7-0-3-0S
max-ephones 20
max-dn 40
ip source-address 10.10.10.1 port 2000
calling-number initiator
service phone videoCapability 1
system message MKC CME
url services http://10.10.10.1/voiceview/common/login.do
url authentication
http://10.10.10.1/voiceview/authentication/authenticate.do
time-zone 21
date-format dd-mm-yy
voicemail 600
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
web admin system name admin secret 0 test
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
secondary-dialtone 9
create cnf-files
ephone-dn 1 dual-line
number 201
label 201
description Sarah
name Sarah
ephone-dn 2 dual-line
number 202
label 202
description Vitthal
name User2 Vitthal
ephone-dn 3 dual-line
number 203 secondary
label 203
description Neil
name User3 Neil
ephone 1
video
username "user1" password 201
mac-address 0018.18EE.947F
type 7961 addon 1 7914
button 1:1
ephone 2
video
username "user2" password 202
mac-address 0018.18BB.B973
type 7941
button 1:2
ephone 3
video
username "user3" password 203
mac-address 0018.1885.6BA2
type 7970
button 1:3

Hi
Please find enclosed debug attachment for voice ccapi and ephone. First, I called from outside. Extension 202 rings but when I answered on extension 202 nothing happens. Replace the rceiever and the pone starts ringing again.Second step. I tried to call out by dialing 9 and then number but after a while phone displays unknown number.
Thank you for your help.
Vitthal

HT1657 I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found - please help

I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found - please help

Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

Having trouble with wav files and sample rates

Hi ,I am having trouble with wav files and sample rates .I have been sent multiple projects on wav as the main instrumental ; I wish to record in 48.000kHz .Now comes the problem.When I try to change the project to 48k It seems to pitch up the track.I can't have them send the logic/project file as most have outboard synths,different plug ins etc.This particular case the producer has recorded the synth task in 41.000 kHz .My successful outcome would be to be able t create a project file in 48 kHz .And NOT pitch up whne I add the instrumenta wav file .Any help would be gratefully recieved,this is my first post so any mistakes I may have made go easy

You'll have to convert the actual synth audio file file that the producer gave you to 48kHz. You can do this in the audio Bin in Logic.

I'm having trouble with iTunes synching and accessing the iTunes store.

I'm having trouble with iTunes synching and accessing the iTunes store. When synching, the process tops at the back up stage, freezes and I can't close the iTunes window, need to ctrl alt del. When trying to access the store, the progress bar stops halfway. I've googled heaps and tried most of the standard answers - unistall, reinstall, etc, now looking for some help please.
This has only started a few weeks back, after working smoothly for the 2 years of owning the iPhone 3gs.
Any suggestions will be appreciated, it's getting realy frustrating.
Cheers for now,
Marty

http://support.apple.com/kb/HT1923?viewlocale=en_US
this worked perfectly for me, with no loss of library! BUT was warned about uninstalling things in the order listed...FYI.

Trouble with internal keyboard and touchpad

Hi,
Yesterday I just out of nowhere started having some trouble with my keyboard and touchpad on my MacBook Air.
The problem displayed itself on various ways. One thing was that I couldn't press regulary with the touchpad. When I was pressing one time, it acted like a pressed with two fingers. When I tried to type in my password on the administrator page, some of the keys didn't work at all and some started to act weird. For example when I was pressing the letter B, the "bar" which displayes where you are in the text (don't know the word in English) went backwards, and when I pressed the letter F it went forward. This seemes so weird and also gives me a hope that it might be some setting failure though B stands for backwards and F stands for forward.
I could log in to the guestpage where I tried to write in "notes". In notes, no letters at all was working, only numbers. When I tried to shut the computer down from the apple symbol I was asked to write administrator name and password. When I tried to mark the name to write it, there wasn't a "bar" but a cross, but on the other hand did it work to write in the password field. But of course not B and F..
Usualy I'd just press the on/off botton until the computer lockdown, unfortunately the botton doesn't work. So the only thing I could do was to let the battery die and hope that it would start when I recharged it and pressed start, this didn't go as well as I hoped, so now I'm stuck with a dead macbook air.
Any ideas of what could be the problem or/and any solutions what might do the trick?
Extremly greatful for any answers

Yes you need to use a wired keyboard.

Trouble with LaCie disk and time machine

HI everyone,
I've been having trouble with using time machine to back-up to my 1 TB LaCie drive (purchased 5/12, unfornuately I was dumb and didn't register the drive and no longer have the box with the serial number and there is no serial number on my drive. The only problem I had up until the end of August was that every so often the LaCie drive (using my FW 800 port) would unmount after waking up from sleep.
The end of August the drive unmounted for no reason while I was on the computer doing a task. Could not get the LaCie drive remounted (rebooting, etc. etc.) To make a long story short, ended up calling apple care who took me through resetting my SMC and PRAM to no avail. Was booted to higher level of support who walked me through trying to repair my drive using the disk utiltiy. When that didn't work, she walked me through erasing and reformatting the LaCie drive and starting a new time machine back-up. Every thing ok until about ten days ago.
Last week, when I woke my iMac up from sleep, I got an error saying that the disk was not ejected properly and I could not mount the drive. Restarting did nothing, the disk did not mount. Shutting down and rebooting seemed to solve the problem and the disk was mounted. Every so often I've had the problem with the disk unmounting after waking up from sleep before. So, I changed my energy sleep preferences. At the end of the day when I am done, I'd unmount the LaCie drive before putting the Mac to sleep using the apple menu.
Today I came in to start my day, plugged the drive in and it would not mount. Tried rebooting nothing. Went into the disk utility, at first the LaCie drive passed the disk verify (6:26:25 and 6:26:38). Then I went into repair disk on the indented drive at 6:27:13, I wasn't sure what it is was doing, thinking that it had hung, I stopped the repair at 6:27:24. Exited disk utility, and the LaCie drive mounted. But I was getting a read only error when I tried to back-up using time machine. So, I went back into disk utility at 6:27:35, when I verified the disk (indented disk), I got an error saying the disk need to be repaired. After several minutes the disk could not be repaired. So, I erased and reformatted the drive. Ran a time machine back-up and it seemed to back-up everything on my hard drive. Just ran another verify disk and it passed.
Is the drive failing? Have some other back-ups of my documents, my address book, iCal and am going to make a backup of some of my pref files and important e-mail files and am going to do some more back-ups after I am done.
Have reached out to the women at apple care whom I talked to last August, but don't expect to hear back from her for at least 24 hours.
Here is my disk utility log
2013-11-07 06:26:25 -0500: Verifying partition map for “LaCie”
2013-11-07 06:26:25 -0500: Starting verification tool:
2013-11-07 06:26:25 -0500: Checking prerequisites
2013-11-07 06:26:25 -0500: Checking the partition list
2013-11-07 06:26:25 -0500: Checking for an EFI system partition
2013-11-07 06:26:25 -0500: Checking the EFI system partition’s size
2013-11-07 06:26:25 -0500: Checking the EFI system partition’s file system
2013-11-07 06:26:25 -0500: Checking all HFS data partition loader spaces
2013-11-07 06:26:25 -0500: Checking Core Storage Physical Volume partitions
2013-11-07 06:26:25 -0500: The partition map appears to be OK
2013-11-07 06:26:25 -0500:
2013-11-07 06:26:25 -0500:
2013-11-07 06:26:38 -0500: Verifying partition map for “LaCie”
2013-11-07 06:26:38 -0500: Starting verification tool:
2013-11-07 06:26:38 -0500: Checking prerequisites
2013-11-07 06:26:38 -0500: Checking the partition list
2013-11-07 06:26:38 -0500: Checking for an EFI system partition
2013-11-07 06:26:38 -0500: Checking the EFI system partition’s size
2013-11-07 06:26:38 -0500: Checking the EFI system partition’s file system
2013-11-07 06:26:38 -0500: Checking all HFS data partition loader spaces
2013-11-07 06:26:38 -0500: Checking Core Storage Physical Volume partitions
2013-11-07 06:26:38 -0500: The partition map appears to be OK
2013-11-07 06:26:38 -0500:
2013-11-07 06:26:38 -0500:
2013-11-07 06:27:13 -0500: Disk Utility started.
2013-11-07 06:27:21 -0500: Verifying and repairing partition map for “LaCie”
2013-11-07 06:27:21 -0500: Starting repair tool:
2013-11-07 06:27:21 -0500: Checking prerequisites
2013-11-07 06:27:21 -0500: Checking the partition list
2013-11-07 06:27:21 -0500: Checking for an EFI system partition
2013-11-07 06:27:21 -0500: Checking the EFI system partition’s size
2013-11-07 06:27:21 -0500: Checking the EFI system partition’s file system
2013-11-07 06:27:23 -0500: Checking all HFS data partition loader spaces
2013-11-07 06:27:24 -0500: Reviewing boot support loaders
2013-11-07 06:27:24 -0500: Checking Core Storage Physical Volume partitions
2013-11-07 06:27:24 -0500: Updating Windows boot.ini files as required
2013-11-07 06:27:24 -0500: The partition map appears to be OK
2013-11-07 06:27:24 -0500:
2013-11-07 06:27:24 -0500:
2013-11-07 06:27:35 -0500: Verifying volume “LaCie”
2013-11-07 06:27:35 -0500: Starting verification tool:
2013-11-07 06:27:35 -0500: Checking file system2013-11-07 06:27:35 -0500: Error: This disk needs to be repaired. Click Repair Disk.2013-11-07 06:27:35 -0500:
2013-11-07 06:27:35 -0500: Disk Utility stopped verifying “LaCie”: This disk needs to be repaired. Click Repair Disk.
2013-11-07 06:28:05 -0500:
2013-11-07 06:28:13 -0500: Verify and Repair volume “LaCie”
2013-11-07 06:28:13 -0500: Starting repair tool:
2013-11-07 06:28:13 -0500: Checking file system2013-11-07 06:28:13 -0500: Volume repair complete.2013-11-07 06:28:13 -0500: Updating boot support partitions for the volume as required.2013-11-07 06:35:05 -0500: Stopped by user
2013-11-07 06:44:56 -0500: Disk Utility started.
2013-11-07 06:45:20 -0500: Verifying volume “LaCie”
2013-11-07 06:45:20 -0500: Starting verification tool:
2013-11-07 06:45:20 -0500: Checking file system2013-11-07 06:45:20 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:45:20 -0500: Checking extents overflow file.
2013-11-07 06:45:20 -0500: Checking catalog file.
2013-11-07 06:45:59 -0500: Missing thread record (id = 5057741)
2013-11-07 06:46:06 -0500: Checking multi-linked files.
2013-11-07 06:46:19 -0500: Checking catalog hierarchy.
2013-11-07 06:46:38 -0500: Invalid directory item count
2013-11-07 06:46:38 -0500: (It should be 0 instead of 4)
2013-11-07 06:46:38 -0500: Invalid volume directory count
2013-11-07 06:46:38 -0500: (It should be 166840 instead of 166841)
2013-11-07 06:46:38 -0500: Checking extended attributes file.
2013-11-07 06:47:05 -0500: Checking multi-linked directories.
2013-11-07 06:48:10 -0500: Checking volume bitmap.
2013-11-07 06:48:12 -0500: Checking volume information.
2013-11-07 06:48:12 -0500: The volume LaCie was found corrupt and needs to be repaired.
2013-11-07 06:48:12 -0500: Error: This disk needs to be repaired. Click Repair Disk.2013-11-07 06:48:12 -0500:
2013-11-07 06:48:12 -0500: Disk Utility stopped verifying “LaCie”: This disk needs to be repaired. Click Repair Disk.
2013-11-07 06:48:12 -0500:
2013-11-07 06:50:02 -0500: Verify and Repair volume “LaCie”
2013-11-07 06:50:02 -0500: Starting repair tool:
2013-11-07 06:50:02 -0500: Checking file system2013-11-07 06:50:02 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:50:02 -0500: Checking extents overflow file.
2013-11-07 06:50:02 -0500: Checking catalog file.
2013-11-07 06:50:41 -0500: Missing thread record (id = 5057741)
2013-11-07 06:50:48 -0500: Checking multi-linked files.
2013-11-07 06:51:02 -0500: Checking catalog hierarchy.
2013-11-07 06:51:20 -0500: Invalid directory item count
2013-11-07 06:51:20 -0500: (It should be 0 instead of 4)
2013-11-07 06:51:20 -0500: Invalid volume directory count
2013-11-07 06:51:20 -0500: (It should be 166840 instead of 166841)
2013-11-07 06:51:20 -0500: Checking extended attributes file.
2013-11-07 06:51:47 -0500: Checking multi-linked directories.
2013-11-07 06:52:55 -0500: Checking volume bitmap.
2013-11-07 06:52:56 -0500: Checking volume information.
2013-11-07 06:52:56 -0500: Repairing volume.
2013-11-07 06:52:56 -0500: Missing directory record (id = 5057741)
2013-11-07 06:52:56 -0500: Look for missing items in lost+found directory.
2013-11-07 06:53:10 -0500: Rechecking volume.
2013-11-07 06:53:10 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:53:10 -0500: Checking extents overflow file.
2013-11-07 06:53:10 -0500: Checking catalog file.
2013-11-07 06:53:16 -0500: Incorrect number of thread records
2013-11-07 06:53:22 -0500: Checking multi-linked files.
2013-11-07 06:53:35 -0500: Checking catalog hierarchy.
2013-11-07 06:53:53 -0500: Invalid directory item count
2013-11-07 06:53:54 -0500: (It should be 5 instead of 6)
2013-11-07 06:53:54 -0500: Invalid volume directory count
2013-11-07 06:53:54 -0500: (It should be 166844 instead of 166842)
2013-11-07 06:53:54 -0500: Invalid volume file count
2013-11-07 06:53:54 -0500: (It should be 1056326 instead of 1056321)
2013-11-07 06:53:54 -0500: Checking extended attributes file.
2013-11-07 06:54:20 -0500: Checking multi-linked directories.
2013-11-07 06:55:25 -0500: Checking volume bitmap.
2013-11-07 06:55:26 -0500: Checking volume information.
2013-11-07 06:55:26 -0500: Repairing volume.
2013-11-07 06:58:06 -0500: Rechecking volume.
2013-11-07 06:58:06 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:58:06 -0500: Checking extents overflow file.
2013-11-07 06:58:07 -0500: Checking catalog file.
2013-11-07 06:58:12 -0500: Incorrect number of thread records
2013-11-07 06:58:18 -0500: Checking multi-linked files.
2013-11-07 06:58:31 -0500: Checking catalog hierarchy.
2013-11-07 06:58:50 -0500: Invalid volume directory count
2013-11-07 06:58:50 -0500: (It should be 166844 instead of 166842)
2013-11-07 06:58:50 -0500: Invalid volume file count
2013-11-07 06:58:50 -0500: (It should be 1056326 instead of 1056321)
2013-11-07 06:58:50 -0500: Checking extended attributes file.
2013-11-07 06:59:17 -0500: Checking multi-linked directories.
2013-11-07 07:00:22 -0500: Checking volume bitmap.
2013-11-07 07:00:24 -0500: Checking volume information.
2013-11-07 07:00:24 -0500: Repairing volume.
2013-11-07 07:03:03 -0500: Rechecking volume.
2013-11-07 07:03:03 -0500: Checking Journaled HFS Plus volume.
2013-11-07 07:03:03 -0500: Checking extents overflow file.
2013-11-07 07:03:04 -0500: Checking catalog file.
2013-11-07 07:03:09 -0500: Incorrect number of thread records
2013-11-07 07:03:15 -0500: Checking multi-linked files.
2013-11-07 07:03:29 -0500: Checking catalog hierarchy.
2013-11-07 07:03:47 -0500: Invalid volume directory count
2013-11-07 07:03:47 -0500: (It should be 166844 instead of 166842)
2013-11-07 07:03:47 -0500: Invalid volume file count
2013-11-07 07:03:47 -0500: (It should be 1056326 instead of 1056321)
2013-11-07 07:03:47 -0500: Checking extended attributes file.
2013-11-07 07:04:14 -0500: Checking multi-linked directories.
2013-11-07 07:05:19 -0500: Checking volume bitmap.
2013-11-07 07:05:20 -0500: Checking volume information.
2013-11-07 07:05:20 -0500: The volume LaCie could not be repaired after 3 attempts.
2013-11-07 07:05:21 -0500: Volume repair complete.2013-11-07 07:05:21 -0500: Updating boot support partitions for the volume as required.2013-11-07 07:05:21 -0500: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.2013-11-07 07:05:21 -0500:
2013-11-07 07:05:21 -0500: Disk Utility stopped repairing “LaCie”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
2013-11-07 07:05:21 -0500:
2013-11-07 07:09:45 -0500: Disk Utility started.
2013-11-07 07:11:45 -0500: Preparing to erase : “LaCie”
2013-11-07 07:11:45 -0500:     Partition Scheme: GUID Partition Table
2013-11-07 07:11:45 -0500:     1 volume will be erased
2013-11-07 07:11:45 -0500:         Name        : “LaCie”
2013-11-07 07:11:45 -0500:         Size        : 999.86 GB
2013-11-07 07:11:45 -0500:         File system    : Mac OS Extended (Journaled)
2013-11-07 07:11:45 -0500: Unmounting disk
2013-11-07 07:11:45 -0500: Erasing
2013-11-07 07:11:54 -0500: Initialized /dev/rdisk1s2 as a 931 GB HFS Plus volume with a 81920k journal
2013-11-07 07:11:54 -0500: Mounting disk
2013-11-07 07:11:54 -0500: Erase complete.
2013-11-07 07:11:54 -0500:
2013-11-07 10:38:00 -0500: Disk Utility started.
2013-11-07 10:38:12 -0500: Verifying volume “LaCie”
2013-11-07 10:38:12 -0500: Starting verification tool:
2013-11-07 10:38:14 -0500: Checking file system2013-11-07 10:38:14 -0500: Checking Journaled HFS Plus volume.
2013-11-07 10:38:14 -0500: Checking extents overflow file.
2013-11-07 10:38:14 -0500: Checking catalog file.
2013-11-07 10:38:29 -0500: Checking multi-linked files.
2013-11-07 10:38:29 -0500: Checking catalog hierarchy.
2013-11-07 10:38:41 -0500: Checking extended attributes file.
2013-11-07 10:39:04 -0500: Checking multi-linked directories.
2013-11-07 10:39:31 -0500: Checking volume bitmap.
2013-11-07 10:39:32 -0500: Checking volume information.
2013-11-07 10:39:32 -0500: The volume LaCie appears to be OK.
2013-11-07 10:39:32 -0500: Repair tool completed:
2013-11-07 10:39:32 -0500:
2013-11-07 10:39:32 -0500:

I just got a call back from the upper level support person at apple care who had been advising me on my trouble with time machine and my LaCie 1 TB FWD. I had sent her much of the same verbiage as I posted here. As some of you have probably figured out, the verdict is that the drive is probably failing. She says this because I have had to do two erase and reformats. She thought that the intermitant problem that I have had with the drive unmounting when my iMac wakes from sleep could be related to the drive failing.
In the meantime I have a secondary back-up (not using time machine) and the LaCie 1 TB FWD is working for the moment.
Thanks to all who read all my verbiage.
And in the meantime, I've learned something. I marked this question as solved. But I'm open to other things to try.
Message was edited by: njtreehugger minor edits and update

TS3999 Help! Trouble with my calendar and icloud.

I am having trouble with my calendar and icloud.
Customers send me meeting invites and I can accept them no problem. But if they subsequently change the date or time I get an error message:
Access to “appointment name” in “Home” in account “iCloud” is not permitted.
The server responded:
“403”
to operation CalDAVWriteEntityQueueableOperation
sometimes the time changes in my calendar, sometimes it doesn't, and my customers keep getting messages back from icloud 'accepting' the original date, not the changed date!!
It is driving me an my clients crazy! any help would be appreciated.

I had a problem specific to the Calendar on web-based Firefox (PC) Was asked for a separate sign-in I'd never seen before which didn't work. I resolved this by signing out, signing in again.

Trouble with Canon MF4370dn and Safe Mode

Similar Messages

Maybe you are looking for