Trouble with Canvio Wireless Adapter

Hi --
I just received the Canvio Wireless Adapter and am trying to set it up.
First off, I thought it would be accessible via Windows, but I'm not seeing how that's done, so at least I thought I could use it with my iPhone. I connected it via the instructions, and then connected to the Toshiba wadp connection. It detects my Western Digital external drive, but when trying to browse, I get a message saying to check the device to make sure it has access to the wireless adapter.
I thought when connecting to the network adapter in Windows, it would then allow me to browse the folders on the external drive via explorer since it's on that network.
Do I need to enable something on the external drive? It's NFTS formatted, and I have sharing turned on.
Any ideas?

Thanks for the reply --
Yeah, I meant I was using a Windows explorer window, not Internet Explorer. The drive works fine when I plug it directly into the computer, but when I connect to the adapter in Windows, then try to access the drive, it's not even recognizing the drive.
The manual says if everything's configured properly, there will be two green lights and a blue light, the blue light signalling the drive is being read. There's no blue light on my adapter so I'm gusesing there's something not right in the settings. Just can't figure out what it is.
Too bad it doesn't work, definitely seems like a good product.

Similar Messages

Issues with usb wireless adapter

Hi
Please excuse my ignorance.
I have an imac (about 2 years old) with a built in airport card. I am trying to use a usb wireless adapter. It has a realtek rtl8187. we have a wifi network here that works with my pc using this adapter but i cant get it to work on the mac. You have to sling the adapter on the window sill but it picks it up fine.
I have installed the supplied software (obviously the mac one!) and it installs the software and driver. After i have restarted, and plug the thing in, it tells me to turn on my wlan card on the supplied software?? It shows up in the listing on network settings as ethernet adapter ((null)). I cannot find any setting to turn on my wireless card, i thought that was airport?
The airport picks up the network but the signal is too weak to connect, hence the adapter with a bit more guts....
I have this beautiful mac, colecting dust and am having to use a pc!
If i connect the usb adapter without installing the software, it constantly has a box popping up in network settings saying that an external device has changed settings! it doesnt stop doing it, until you delete the location...
Can anyone help? I may be being thick and dont have a wlan card or something or airport will not allow me to use this thing. I only just started getting into macs when i moved to spain, where it has sat colecting dust for 3 months.
I would appreciate any advice.
Thanks
Richard

TNHusker, welcome to the forum.
Cisco makes a router that is good for two-story homes. I have used it for several years. My router / hotspot is on the second floor and my Blu-ray player and laptop are on the first floor. Both work extremely well with the router. They also make a USB, AM10, that works very nicely with a desktop without a wireless card.
I have had a few problems with both, but have always been helped successfully by Cisco Customer Service. They are very good.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Connecting an iPad to a projector with a wireless adapter

A business where I am going to conduct training has a ceiling mounted projector. The projector has an Imation wireless adapter installed. The product has been discontinued by Imation so they are not developing any drivers to work with iPads. Does anyone have any suggestions? Are there wireless adapters that will work with iPads that I could suggest to the company? They are in the process of distributing iPads to selected users in the business so this issue has not come up for them yet.
Thanks for any suggestions.

Hi CraftyLady53,
I use a program called Reflector to wirelessly display my iPad onto my computer. I then connect my computer to a projector so that my iPad screen can be displayed via projector to a screen on the wall.
If you want to cut the computer out of the equation, you'll want to go with an Apple TV which you can directly AirPlay your iPad display to the projector.
Hope this answers your question!
~Joe

Upgrade my DV6-6126sl with an Wireless adapter Bluetooth

Hi,
I open a new topic, because searching among existing ones, I did not find useful answers.
I have a DV6-6126sl and I decided to upgrade it with a wireless card that implements the Bluetooth. analyzing the service and maintenance guide, I chose to buy the part number 657325-001, which should be compatible with both AMD and those models intel, but when I insert the card at startup hangs and does not post bios, giving an error "wireless adapter installed is not supported and then has the error" wireless (702) "," how is it possible? there is a method to unlock it, thanks
Knowledge is power, sharing knowledge is powerful!
HP DV6-6126sl:AMD A8-3510MX, 16Gb (2x8Gb) DDR3 1600 Corsair Vengeance, SSD Samsung 840 pro 256Gb + ST950042 0AS 500Gb 7200rpm, AMD Radeon HD 6755G2 1Gb DDR5

Today, the seller has sent to me an email that says: "I have the Ralink RT3090BC4 802.11b/g/n 1 × 1 WiFi and Bluetooth 2.1 + EDR Combo Adapter 630705-001".
According to you, since the manual is listed as "For use on all computer models:" can I try?
Knowledge is power, sharing knowledge is powerful!
HP DV6-6126sl:AMD A8-3510MX, 16Gb (2x8Gb) DDR3 1600 Corsair Vengeance, SSD Samsung 840 pro 256Gb + ST950042 0AS 500Gb 7200rpm, AMD Radeon HD 6755G2 1Gb DDR5

I upgraded Lion recently to 10.7.3. Since that time I am having trouble with my wireless connection. All other devices are fine, but I keep losing the connection since the upgrade.

Recently I upgraded Lion to 10.7.3. Since that time I have been having a lot of trouble with my internet connection. I keep losing the connect and have to go to diagnostics and turn it back on. Is anyone else having this problem?
Thanks, Pat

I'm afraid there are numerous threads on here discussing this problem. I posted in this one earlier that has a couple of suggestions, but the real solution will hopefully be provided in an update from Apple:
https://discussions.apple.com/message/17589686#17589686

Trouble with Apple Wireless networks

I have aan extended wireless network in our house, across four apple wireless devices: Time Capsule (which is the lead device), an airport extreme (dual-band), an airport extreme (dual band II) and an Airport Express 802.11n.
The dual-band II is a new device and since I have incorporated it i have had issues with the wireless network that only seem to be solved if we turn the Express off. The Express is in a Kitchen, which is beneath a study where the Extreme dual band II is.
Does anyone have any idea why there might be a problem (seems like some kind of wave interference) and how i solve it. I put the express in the kitchen so I could connect it to a Sonos device, which then allows me to use airplay with the Sonos.
Regards
Edward

Since all of your AirPorts are 802.11n models, you can only have one base station that will be extended. You can have more than one to extend it. So, in this case, the two 802.11n AirPort Extreme Base Stations (AEBSn) & the AXn would be attempting to extend the wireless range of the Time Capsule (TC).
Think of it as the TC is at the hub of a wheel and each of the extending base station would be on individual spokes of that wheel. The issue here would be the farther away an extending base station is, the less bandwidth that will be available at that part of the extended network ... and possibly why you are getting the results that you are.
By default, the AXn (or any AirPort will not be set to extend a network. You would have to set this as an option within the AirPort Utility. If you didn't already do this for the AXn, then it would be in its default configuration of a wireless router that would be broadcasting its own wireless network ... and NOT extending the TC's network.

Trouble with printing wireless

Can anyone help. Up until recently I have had no trouble printing wirelessly with iPad and HP photos mart B210 series. Recently it has become a nightmare.
Printing jobs are left in a que. it connects to the printer, but will not complete print task. The same problem occurs with mac book pro. Printer is connected
To router and so is iPad and MacBook. Iphone4s also a problem sending print jobs. Have spent long hours trying to sort this out .but to no avail.
Then suddenly I van print with iPad and mac book but not phone!,
What is going on!!!

Gotch-
Did you happen to make any changes to your WiFi network at about the time your trouble started?
I suggest you unplug your WiFi router for a few seconds. Then reset the network in your iPad and iPhone. Go to Settings-General-Reset-Reset Network Settings. You will need to reconnect each to WiFi.
Is it possible you have a neighbor whose Wifi router happens to have the same name (SSID) as yours? It is possible for a printer, an iPad or a computer to jump to a different WiFi base station with the same name. This happened to me a few weeks ago when I had trouble printing. (There are a LOT of WiFi base stations out there named Linksys!)
Fred

Trouble with my wireless and cable internet connections with S05

I got a Lenovo S205 last month and have been having trouble connecting it to the internet.
I connect wirelessly to my internet box and sit about 1m away from it. Even though I am so close and my connection shows full strengh on my computer when I am browsing the internet pages often fail to load or miss images or css. I can sit and hit refresh for a mintue before the page loads but my wireless icon never says it has lost connection or signs me out of msn etc.
I tried a different brower to check it was not that but it is still the same. I also find when speaking on skype that my video feed will stop and start again and the sound doesn't come through smoothly.
Because of the trouble and how close I am to the internet box I tried with a cabel but when I plug it in and turn off wireless the computer doesnt seem pick it up and says I have no connection. I tried the same cabel in my old laptop and it worked fine so it seems something wrong with my port.
What can I do to fix it? Thanks
Stephanie

hey steffi,
try uninstalling both the wired and wireless drivers for your unit.
let windows install its own generic drivers and try again on both wired and wireless connection at your home.
if possible, try it at a different location and see if it makes any difference. If you are able to connect and have no problems browsing the web on a different wireless/wired connection, then you will need to check the settings of your home's modem
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

I pod touch interacting with PC wireless adapter?

Hi all, I'm new here and I've been having some problems in the last week with my iPod Touch 8GB. At first, I had no problems with it, but in the last week, every time I plug my iPod into my PC via the USB cable, my PC wifi connection (through a Linksys Wireless-G adapter to a Linksys Wireless-G router) stops working. As soon as the iPod is plugged in, the adapter cannot locate the access point. And unplugging the iPod doesn't correct the situation--I have to completely restart my C with the iPod disconnected to get my internet connection back. I've tried to locate some sort of preference or option to correct this, but to no avail. Any help is appreciated!

I wonder if you're possibly overloading your USB ports? I have a Linksys USB adapter for my desktop PC to connect it to my Home network, I'm assuming your adapater is USB as well, please correct me if I am wrong. Try disconnecting some other non-essential USB devices prior to connecting the iPod, or, connecting the iPod away from the adapter. Apple recommends using a rear USB port on a desktop computer to ensure a high power/speed port.
CG

[SOLVED] Authentication with AP on 3.6.* with Intel Wireless adapter

Edit 06/2014: Solved ages ago via 3.10+
Kernels tested: 3.6.2-1, 3.6.3-1, 3.6.4-1.
After the latest kernel upgrade my wireless can't authenticate with my AP, wicd-gtk hangs on "authenticating" and then says "bad password".
lspci -vnn | grep -i net
02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] [8086:0083]
A snip from /var/log/messages showing errors at boot. The last messages just repeat continuously.
Oct 16 14:52:44 localhost kernel: [ 9.337732] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 3513
8
Oct 16 14:52:44 localhost kernel: [ 10.079892] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Oct 16 14:52:44 localhost kernel: [ 10.079898] iwldvm: Copyright(c) 2003-2012 Intel Corporation
Oct 16 14:52:44 localhost kernel: [ 10.079930] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
Oct 16 14:52:44 localhost kernel: [ 10.079933] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
Oct 16 14:52:44 localhost kernel: [ 10.079935] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
Oct 16 14:52:44 localhost kernel: [ 10.079937] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
Oct 16 14:52:44 localhost kernel: [ 10.079938] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
Oct 16 14:52:44 localhost kernel: [ 10.079941] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 100
0 BGN, REV=0x6C
Oct 16 14:52:44 localhost kernel: [ 10.080008] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:44 localhost kernel: [ 10.087424] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
Oct 16 14:52:44 localhost kernel: [ 10.100826] iwlwifi 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
Oct 16 14:52:44 localhost kernel: [ 10.100828] iwlwifi 0000:02:00.0: Device SKU: 0x50
Oct 16 14:52:44 localhost kernel: [ 10.100830] iwlwifi 0000:02:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
Oct 16 14:52:44 localhost kernel: [ 15.821575] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:44 localhost kernel: [ 15.829048] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:44 localhost kernel: [ 15.879478] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:44 localhost kernel: [ 15.886902] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:44 localhost acpid: starting up with netlink and the input layer
Oct 16 14:52:44 localhost acpid: 4 rules loaded
Oct 16 14:52:44 localhost acpid: waiting for events: event logging is off
Oct 16 14:52:53 localhost kernel: [ 25.219799] jme 0000:04:00.5: eth0: Link is down
Oct 16 14:52:53 localhost acpid: client connected from 600[0:10]
Oct 16 14:52:53 localhost acpid: 1 client rule loaded
Oct 16 14:52:56 localhost kernel: [ 28.035738] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:56 localhost kernel: [ 28.043276] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:56 localhost kernel: [ 28.268085] jme 0000:04:00.5: eth0: Link is down
Oct 16 14:52:56 localhost kernel: [ 28.309378] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:56 localhost kernel: [ 28.316816] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:59 localhost kernel: [ 31.543667] wlan0: authenticate with 84:c9:b2:b8:cb:f0
Oct 16 14:53:01 localhost kernel: [ 33.551368] wlan0: failed to insert STA entry for the AP (error -5)
Oct 16 14:53:01 localhost kernel: [ 33.551710] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:01 localhost kernel: [ 33.551758] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:01 localhost kernel: [ 33.559158] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:03 localhost kernel: [ 35.603895] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:03 localhost kernel: [ 35.603953] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:03 localhost kernel: [ 35.611394] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:05 localhost kernel: [ 37.656025] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:05 localhost kernel: [ 37.656093] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:06 localhost kernel: [ 37.663560] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:08 localhost kernel: [ 39.708223] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:08 localhost kernel: [ 39.708277] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:08 localhost kernel: [ 39.715713] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:10 localhost kernel: [ 41.760384] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:10 localhost kernel: [ 41.760415] ------------[ cut here ]------------
Oct 16 14:53:10 localhost kernel: [ 41.760424] WARNING: at drivers/net/wireless/iwlwifi/dvm/../iwl-trans.h:607 iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]()
Oct 16 14:53:10 localhost kernel: [ 41.760425] Hardware name: K52F
Oct 16 14:53:10 localhost kernel: [ 41.760432] iwl_trans_wait_tx_queue_empty bad state = 0
Oct 16 14:53:10 localhost kernel: [ 41.760435] Modules linked in: reiserfs arc4 iwldvm mac80211 uvcvideo jme iwlwifi videobuf2_vmalloc videobuf2_memops videobuf2_core videodev joydev snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec acpi_cpufreq snd_pcm snd_page_alloc snd_hwdep snd_timer snd jmb38x_ms serio_raw media sdhci_pci asus_laptop iTCO_wdt iTCO_vendor_support cfg80211 mperf sdhci mei intel_ips lpc_ich mmc_core i2c_i801 mii soundcore microcode kvm_intel psmouse memstick input_polldev evdev processor kvm ac thermal battery sparse_keymap coretemp crc32c_intel rfkill tun loop ext4 crc16 jbd2 mbcache sr_mod sd_mod cdrom ahci libahci libata scsi_mod ehci_hcd usbcore usb_common i915 video button i2c_algo_bit intel_agp intel_gtt drm_kms_helper drm agpgart i2c_core
Oct 16 14:53:10 localhost kernel: [ 41.760539] Pid: 658, comm: wpa_supplicant Not tainted 3.6.2-1-ARCH #1
Oct 16 14:53:10 localhost kernel: [ 41.760542] Call Trace:
Oct 16 14:53:10 localhost kernel: [ 41.760554] [<c0139f22>] warn_slowpath_common+0x72/0xa0
Oct 16 14:53:10 localhost kernel: [ 41.760565] [<fa8e4922>] ? iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]
Oct 16 14:53:10 localhost kernel: [ 41.760574] [<fa8e4922>] ? iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]
Oct 16 14:53:10 localhost kernel: [ 41.760579] [<c0139ff3>] warn_slowpath_fmt+0x33/0x40
Oct 16 14:53:10 localhost kernel: [ 41.760588] [<fa8e4922>] iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]
Oct 16 14:53:10 localhost kernel: [ 41.760608] [<fa840803>] __ieee80211_recalc_idle+0x1f3/0x2d0 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760626] [<fa84112a>] ieee80211_recalc_idle+0x2a/0x50 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760642] [<fa83942e>] __ieee80211_start_scan+0xfe/0x510 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760659] [<fa83a37e>] ieee80211_request_scan+0x2e/0x50 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760677] [<fa846f29>] ieee80211_scan+0x69/0x80 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760693] [<f9864178>] cfg80211_wext_siwscan+0x248/0x2e0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760700] [<c02294ed>] ? __kmalloc+0x12d/0x160
Oct 16 14:53:10 localhost kernel: [ 41.760713] [<f9863f30>] ? cfg80211_find_vendor_ie+0xc0/0xc0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760722] [<c04ad214>] ioctl_standard_call+0x2d4/0x3c0
Oct 16 14:53:10 localhost kernel: [ 41.760729] [<c04d0fc3>] ? schedule+0x23/0x60
Oct 16 14:53:10 localhost kernel: [ 41.760741] [<f9863f30>] ? cfg80211_find_vendor_ie+0xc0/0xc0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760748] [<c04ad4fd>] wext_handle_ioctl+0x1fd/0x230
Oct 16 14:53:10 localhost kernel: [ 41.760760] [<f9863f30>] ? cfg80211_find_vendor_ie+0xc0/0xc0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760768] [<c03f8cc3>] dev_ioctl+0xb3/0x4e0
Oct 16 14:53:10 localhost kernel: [ 41.760776] [<c03e3f4d>] ? sys_sendto+0xfd/0x140
Oct 16 14:53:10 localhost kernel: [ 41.760784] [<c03e2025>] sock_ioctl+0x85/0x260
Oct 16 14:53:10 localhost kernel: [ 41.760790] [<c03e1fa0>] ? sock_fasync+0x90/0x90
Oct 16 14:53:10 localhost kernel: [ 41.760796] [<c0243eca>] do_vfs_ioctl+0x7a/0x570
Oct 16 14:53:10 localhost kernel: [ 41.760804] [<c02f70e1>] ? copy_to_user+0x31/0x50
Oct 16 14:53:10 localhost kernel: [ 41.760813] [<c01855b7>] ? getnstimeofday+0x47/0x130
Oct 16 14:53:10 localhost kernel: [ 41.760819] [<c0244428>] sys_ioctl+0x68/0x80
Oct 16 14:53:10 localhost kernel: [ 41.760826] [<c04d7e1f>] sysenter_do_call+0x12/0x28
Oct 16 14:53:10 localhost kernel: [ 41.760830] ---[ end trace 004dc83771a21a26 ]---
Oct 16 14:53:10 localhost kernel: [ 41.760841] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
Oct 16 14:53:10 localhost kernel: [ 41.760938] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:10 localhost kernel: [ 41.768376] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:12 localhost kernel: [ 43.825863] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:12 localhost kernel: [ 43.825917] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:12 localhost kernel: [ 43.833397] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:14 localhost kernel: [ 45.881485] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:14 localhost kernel: [ 45.881488] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
Oct 16 14:53:14 localhost kernel: [ 45.881593] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:14 localhost kernel: [ 45.889068] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:16 localhost kernel: [ 47.940286] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:16 localhost kernel: [ 47.940344] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
dmesg output (this repeats also)
[ 81.793548] iwlwifi 0000:02:00.0: Loaded firmware version: 39.31.5.1 build 35138
[ 81.796181] iwlwifi 0000:02:00.0: Start IWL Error Log Dump:
[ 81.798709] iwlwifi 0000:02:00.0: Status: 0x0000204C, count: 5
[ 81.801253] iwlwifi 0000:02:00.0: 0x00000005 | SYSASSERT
[ 81.803780] iwlwifi 0000:02:00.0: 0x0001E404 | uPc
[ 81.806261] iwlwifi 0000:02:00.0: 0x0001E3E8 | branchlink1
[ 81.808719] iwlwifi 0000:02:00.0: 0x0001E3E8 | branchlink2
[ 81.811080] iwlwifi 0000:02:00.0: 0x00000826 | interruptlink1
[ 81.813361] iwlwifi 0000:02:00.0: 0x00000000 | interruptlink2
[ 81.815543] iwlwifi 0000:02:00.0: 0x0000020D | data1
[ 81.817643] iwlwifi 0000:02:00.0: 0x00000009 | data2
[ 81.819695] iwlwifi 0000:02:00.0: 0x0000020D | line
[ 81.821702] iwlwifi 0000:02:00.0: 0x000186E0 | beacon time
[ 81.823683] iwlwifi 0000:02:00.0: 0x00000920 | tsf low
[ 81.825611] iwlwifi 0000:02:00.0: 0x00000000 | tsf hi
[ 81.827480] iwlwifi 0000:02:00.0: 0x00000000 | time gp1
[ 81.829333] iwlwifi 0000:02:00.0: 0x0000BE04 | time gp2
[ 81.831170] iwlwifi 0000:02:00.0: 0x00000000 | time gp3
[ 81.833008] iwlwifi 0000:02:00.0: 0x0001271F | uCode version
[ 81.834856] iwlwifi 0000:02:00.0: 0x0000006C | hw version
[ 81.836706] iwlwifi 0000:02:00.0: 0x00C8330C | board version
[ 81.838560] iwlwifi 0000:02:00.0: 0x04150010 | hcmd
[ 81.840401] iwlwifi 0000:02:00.0: 0x00022080 | isr0
[ 81.842231] iwlwifi 0000:02:00.0: 0x00000000 | isr1
[ 81.844048] iwlwifi 0000:02:00.0: 0x00000002 | isr2
[ 81.845845] iwlwifi 0000:02:00.0: 0x0040D440 | isr3
[ 81.847639] iwlwifi 0000:02:00.0: 0x00200080 | isr4
[ 81.849426] iwlwifi 0000:02:00.0: 0x01000002 | isr_pref
[ 81.851216] iwlwifi 0000:02:00.0: 0x000114DA | wait_event
[ 81.853015] iwlwifi 0000:02:00.0: 0x00000000 | l2p_control
[ 81.854816] iwlwifi 0000:02:00.0: 0x00000000 | l2p_duration
[ 81.856637] iwlwifi 0000:02:00.0: 0x00000000 | l2p_mhvalid
[ 81.858438] iwlwifi 0000:02:00.0: 0x00000000 | l2p_addr_match
[ 81.860230] iwlwifi 0000:02:00.0: 0x00000005 | lmpm_pmg_sel
[ 81.862012] iwlwifi 0000:02:00.0: 0x10021644 | timestamp
[ 81.863786] iwlwifi 0000:02:00.0: 0x00001020 | flow_handler
[ 81.865622] iwlwifi 0000:02:00.0: Start IWL Event Log Dump: display last 20 entries
[ 81.867473] iwlwifi 0000:02:00.0: EVT_LOGT:0000047246:0x0000000f:0484
[ 81.869314] iwlwifi 0000:02:00.0: EVT_LOGT:0000047256:0x00000010:0484
[ 81.871100] iwlwifi 0000:02:00.0: EVT_LOGT:0000047269:0x00000015:0484
[ 81.872853] iwlwifi 0000:02:00.0: EVT_LOGT:0000047280:0x00000016:0484
[ 81.874572] iwlwifi 0000:02:00.0: EVT_LOGT:0000047290:0x00000017:0484
[ 81.876261] iwlwifi 0000:02:00.0: EVT_LOGT:0000047301:0x00000018:0484
[ 81.877917] iwlwifi 0000:02:00.0: EVT_LOGT:0000047306:0x00000019:0484
[ 81.879530] iwlwifi 0000:02:00.0: EVT_LOGT:0000047312:0x000001c9:1108
[ 81.881116] iwlwifi 0000:02:00.0: EVT_LOGT:0000047313:0x00000024:1108
[ 81.882667] iwlwifi 0000:02:00.0: EVT_LOGT:0000047313:0x00000001:1108
[ 81.884192] iwlwifi 0000:02:00.0: EVT_LOGT:0000047314:0x00000033:1108
[ 81.885679] iwlwifi 0000:02:00.0: EVT_LOGT:0000047319:0x0002000d:0464
[ 81.887129] iwlwifi 0000:02:00.0: EVT_LOGT:0000047320:0x0000000d:0462
[ 81.888553] iwlwifi 0000:02:00.0: EVT_LOGT:0000047339:0x00002806:1062
[ 81.889959] iwlwifi 0000:02:00.0: EVT_LOGT:0000047343:0x02020202:1074
[ 81.891368] iwlwifi 0000:02:00.0: EVT_LOGT:0000048434:0x00000325:1074
[ 81.892767] iwlwifi 0000:02:00.0: EVT_LOGT:0000048483:0x000001a4:0602
[ 81.894182] iwlwifi 0000:02:00.0: EVT_LOGT:0000048638:0x04150010:0401
[ 81.895595] iwlwifi 0000:02:00.0: EVT_LOGT:0000048640:0x0000000d:0451
[ 81.897017] iwlwifi 0000:02:00.0: EVT_LOGT:0000048646:0x00000000:0125
[ 83.703038] iwlwifi 0000:02:00.0: Error sending REPLY_RXON: time out after 2000ms.
[ 83.704232] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 21 write_ptr 22
[ 83.705636] iwlwifi 0000:02:00.0: Error clearing ASSOC_MSK on BSS (-110)
[ 83.707703] ieee80211 phy0: Hardware restart was requested
[ 83.707758] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 83.715263] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[ 83.779279] iwlwifi 0000:02:00.0: Microcode SW error detected. Restarting 0x2000000.
[ 83.780573] iwlwifi 0000:02:00.0: CSR values:
[ 83.782128] iwlwifi 0000:02:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG)
[ 83.783982] iwlwifi 0000:02:00.0: CSR_HW_IF_CONFIG_REG: 0X00c8330c
[ 83.785851] iwlwifi 0000:02:00.0: CSR_INT_COALESCING: 0X00000040
[ 83.787730] iwlwifi 0000:02:00.0: CSR_INT: 0X00000000
[ 83.789610] iwlwifi 0000:02:00.0: CSR_INT_MASK: 0X00000000
[ 83.791486] iwlwifi 0000:02:00.0: CSR_FH_INT_STATUS: 0X00000000
[ 83.793353] iwlwifi 0000:02:00.0: CSR_GPIO_IN: 0X00000000
[ 83.795234] iwlwifi 0000:02:00.0: CSR_RESET: 0X00000000
[ 83.797121] iwlwifi 0000:02:00.0: CSR_GP_CNTRL: 0X080403c5
[ 83.799023] iwlwifi 0000:02:00.0: CSR_HW_REV: 0X0000006c
[ 83.800936] iwlwifi 0000:02:00.0: CSR_EEPROM_REG: 0X00001885
[ 83.802860] iwlwifi 0000:02:00.0: CSR_EEPROM_GP: 0X90000001
[ 83.804785] iwlwifi 0000:02:00.0: CSR_OTP_GP_REG: 0X00010001
[ 83.806720] iwlwifi 0000:02:00.0: CSR_GIO_REG: 0X00080044
[ 83.808653] iwlwifi 0000:02:00.0: CSR_GP_UCODE_REG: 0X00000010
[ 83.810592] iwlwifi 0000:02:00.0: CSR_GP_DRIVER_REG: 0X00000000
[ 83.812535] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP1: 0X00000000
[ 83.814490] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP2: 0X00000000
[ 83.816425] iwlwifi 0000:02:00.0: CSR_LED_REG: 0X00000078
[ 83.818360] iwlwifi 0000:02:00.0: CSR_DRAM_INT_TBL_REG: 0X88032ccf
[ 83.820300] iwlwifi 0000:02:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200
[ 83.822206] iwlwifi 0000:02:00.0: CSR_ANA_PLL_CFG: 0X00880300
[ 83.824092] iwlwifi 0000:02:00.0: CSR_HW_REV_WA_REG: 0X0001001a
[ 83.825997] iwlwifi 0000:02:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0000
[ 83.827923] iwlwifi 0000:02:00.0: FH register values:
[ 83.829885] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X032d5a00
[ 83.831941] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X0032dbd0
[ 83.834023] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000010
[ 83.836138] iwlwifi 0000:02:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80811104
[ 83.838284] iwlwifi 0000:02:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc
[ 83.840464] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000
[ 83.842674] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
[ 83.844919] iwlwifi 0000:02:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001
[ 83.847190] iwlwifi 0000:02:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000
Any ideas?
Edit: changed thread title
Last edited by Minsc (2014-06-19 01:06:15)

d41f3a76dbc185paulinchenk wrote:
Not for me :-(
I have an Intel(R) Centrino(R) Advanced-N 6205 AGN and the only way get it connecting to my WPA2-AES network was downgrading to linux 3.5. But because I have optimus graphics, this means I can no longer use bumblebee, as it depends on 3.6.
Anyone got a hint for a workaround to get both working?
Thanks
Does the 11n_disable workaround work for you?
Just upgraded to 3.6.5, I still have the problem on Centrino Wireless 100 N, with some differences: now it seems to authenticate but with very low speeds and the connection isn't stable. I haven't found out much more, I'll try to get more information during the week. Right now I still use the 11n disabled.
Last edited by pulce (2012-11-04 18:06:38)

Having trouble with multiple wireless users on WRT54G router

Basically, there are 3 of us wirelessly sharing the internet via a linksys WRT54G router. I have our router password-protected, to avoid randoms stealing out broadband. I am a Mac user (3 year old computer), the other 2 are on PC laptops.
At the moment, I have an excellent internet connection, and it's working just fine. However, if my room mate connects with their laptop (a fairly new model), my internet connection stops working. I still have a signal, but it just really slows down/often stops working entirely. It's as if their wireless connection takes priority and ignores mine (essentially nullifying the router's purpose).
Has anyone come across a problem like this before? Your assistance would be super helpful and appreciated.

Hi, perhaps you may try the following steps to improve the performance of your router:
• Upgrade the router’s firmware
• Reset the router after the firmware upgrade
• Optimize the router’s wireless settings
• Use a wifi analyzer like http://www.metageek.net/products/inssider/ to set a non overlapping channel to the router
• Relocate the router on a more central location for better wireless coverage
• Avoid placing the router on a glass or metallic surface

Troubles with Mac Wireless connection from a PC

Okay, I'm a novice with proper technical terms, but I'll try and describe the problem best I can.
Here's what we have: Mac desktop computer, hooked up to the internet. That Mac desktop has wireless, and is able to transfer that internet connection to other wireless computers. We also have a Mac laptop and a Dell laptop. When the security is turned off, both laptops can pick up the connection just fine.
However, we want the security on for obvious reasons, and when it is turned on, the Mac laptop logs in, no problems. The Dell laptop sees the wireless network, but when I try to connect, it asks me for the Network Key and no matter what we try it will not work.
Anyone know how to solve this problem - other than throwing the Dell out the window and getting a Mac laptop?

However, we want the security on for obvious reasons,
and when it is turned on, the Mac laptop logs in, no
problems. The Dell laptop sees the wireless network,
but when I try to connect, it asks me for the Network
Key and no matter what we try it will not work.
Anyone know how to solve this problem
You can't solve this problem.
When using a Mac as a software base station (sharing internet via Airport) a non-Mac will NOT be able to connect if you use a password.
The only real option is to use a wireless router.

TS2634 I'm having trouble with my wireless keyboard, it isn't locating the iPad. I'm not seeing anything in my guide to help me.

If anyone can help me set up my wireless keyboard to my iPad 2 that would be great. I am excited to use it now that it has arrived. It didn't come with detailed instructions and I'm not finding anything on the website of in the other guide to help me. Thank you!

You need to find a CDMA carrier in the UK and see if they offer iPad data plans. If not, you can sell it and get a GSM iPad the one that uses SIM cards (the AT&T version here in the USA).

Trouble with 6300 wireless presenter

I have been trying to connect wireless presenter from my 6300 to my computer. Its a toshiba laptop with Vista basic i have installed pc suite and and the wireless presenter and the icon is in the task bar running and says 'waiting for connection'. The phone is paired with the computer and bluetooth is on both devices, in the presenter on the phone shows my computer but when i press connect a message on my phone says 'connection failed. make sure bluetooth device on the pc is ready and try again. I have hit a brick wall and dont have a high technology knowlege can anyone help!!!!

You need to disable BT connection on PC Suite Connection Manager as it will reserve BT COM port so Wireless Presenter is not able to use that port. After this, create connection using phone (Wireless Presenter application).

Troubles with loading wireless firmware

On the boot I get a error about loading the wireless firmware. Who can I find this error in the log?

Improper irony aside, I have the same problem on three different machines with latest udev (091-3). Downgrade to 091-2 (if you have still the package in cache) solves the issue and firmware is loaded again.
I am going to post a bug.

Trouble with Canvio Wireless Adapter

Similar Messages

Maybe you are looking for