Trouble with Cisco AnyConnect VPN after getting new Airport Extreme

So I had a previous version Time Capsule that I used for years, and it started having issues where it would start spontaneously rebooting. I decided to get a new Airport Extreme (the new taller one) and went in without a hitch. Problem it, though, I work from home sometimes with my company provided Windows 7 laptop and I'm experiencing issues around the VPN hanging for 15-20 seconds then coming back, maybe 1x or 2x per hour. Especially noticeable when I'm on higher bandwidth applications like Lync meetings or Remote Desktop sessions. Never had the issue on the old Time Capsule, it was always solid (until the device itself started dying), and I don't have the issue when I'm in my office using the same VPN software. Never an issue with any of the computers in the house on the regular internet, non-VPN connection. Is there a setting I missed somewhere in my setup of the new Airport that can help to stabilize that VPN connection? Seems in newer versions, some of the options have been taken away or harder to find.
Running version 7.7.3 on the Airport Extreme.
Andy Martin

Hi Geo,
fnfErr
= -43, /*File not found*/
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Any change on reboot?

Similar Messages

Trouble with Cisco Anyconnect VPN Client

Hello,
our Cisco AnyConnect VPN Client has stopped working, we are a medical office and we are attempting to connect to "clientvpn.e-mds.com" however it will not connect, the username and password we input are irrelevant it doesnt come up with a "wrong credentials" window it just erases the password and at the bottom of the window it says "Please enter your username and password". our version is 2.5.0217 does anyone know anything to try? any help would be appreciated

you may want to try the OS X networking forums:
http://discussions.apple.com/forum.jspa?forumID=733

Problem using SunRay with Cisco AnyConnect VPN Client

I am using Cisco AnyConnect VPN Client Version 2.5.3046
I have a PC and a SunRay connected to my router. I use VPN to connect my SunRay and my PC to my work computer. My PC works fine, I am able to connect to the internet and also run cisco VPN to connect to my work computer. But when I try to use my SunRay, I get a window on the screen with the message:
VPN IKE Phase 1 agg I msg1This window keeps moving around on the screen. I am not able to connect my SunRay through VPN to my work computer. Any idea what could be wrong and how I can fix this?

2.2 is definitely better.
On one PC, I'm fine. On another -- very similar -- it tells me it can't start the VPN even after uninstalling and re-installing and everything else I can think of, with plenty of re-boots inbetween.
Aaaaarrrrrrggggggghhhh.

I'm having trouble with an External HD attached to my Airport Extreme

I connected an external HD to my AirPort extreme using USB. I assigned the disk to my Time Machine backup, but when I try to back up I get a message that the disk is unavailable. The HD is mounted on my desktop and is formatted as MAC OS Extended (Journaled).

New formatted hard drive plugged into Extreme - yes, formatted Mac Journal. The new drive is seen on network, but it cannot be applied as a Time Machine function on my iMac.
I edit the Extreme on Airport utilities - add disks. The hard drive is shown. I enable file sharing, secure shared disks with device password - and update. Nothing happens from that point onwards.
Reading a number of other questions from people with similar problems on other sites, it seems that although this feature is advertised and promoted by Apple in the instruction booklet (page 13), Apple have backed away from this facility post production. Maybe it is not reliable enough in its present form?
I am very disappointed about this as I had intended to use the Extreme to back up several devices in my home and office.
Any other ideas would be welcome.
Thanks

Help with connecting Dell laptop Wifi using new airport extreme

I recently purchased airport extreme. I am having problems setting up my wifi on my Dell laptop. It was working fine with my previous router.
My ITouch and IPad connect fine with WiFi. what do I need to do with the laptop? I've tried everything I can figure out, but no luck.

you should ask in the airport forum rather then the imac forum where nobody are sure to own airports
https://discussions.apple.com/community/wireless/airport

Cisco AnyConnect VPN won't install, says There is a newer version of the AnyConnect client already installed

I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !

Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again

Cisco AnyConnect VPN app on iPhone 4s won't connect

I have successfully installed the Cisco AnyConnect VPN app on my iPad Air and can connect to my target VPN. But the same app on my iPhone 4s won't work. When I try to connect I get this message: "Connect using Cisco AnyConnect App at least once before using any other App." I'm not trying to use another app, in fact I closed all other apps. I'm using the same settings as the Air. I tried with wi-fi, turned wi-fi off, location services on and off, etc. I'm on Verizon.
Has anyone got this to work on an iPhone?
Thanks

Although I agree that this is really a question for Cisco, finding/receiving an official answer there may take a while.
This app worked fine for me until I upgraded today - June 19, 2014 - the date of the release of Version 3.0.09430. After upgrade, I get the same message. The update note says "Apple IOS Connect On Demand Considerations - To ensure proper establish of Connect On Demand VPN tunnels after updating AnyConnect, users must manually start the Any Connect app and establish a connection. If this is not done, upon the next iOS system attempt to establish a VPN tunnel, the error message 'The VPN Connection requires an application to start up' will display."
But I too have tried various interpretations of that, and still get the error above quoted by azmilt.
It appears that either:
- the upgrade is faulty
- the version itself is faulty
- the directions for a proper upgrade need clarification
So if anyone has upgraded to this version, and made it work, I think that providing a procedure would help the community.

RAZR MAXX HotSpot with Cisco AnyConnect

Hi,
I'm having problems connecting using the phones mobile hotspot and Cisco AnyConnect VPN. AnyConnect is used to control the wireless access on my PC. That part works but when it tries to VPN, it fails. Sometimes it works, I'd say 60% of the time it doesn't.
I've read through numerous threads but they seem to apply to the MiFi hotspots, not phones. Anyone having luck getting a VPN connection with the phone's hotspot?
Regards-Michael G.

All - I have a solution for this problem.
In your AnyConnect Group Policy, go to Advanced > Split Tunneling
for "DNS Names" uncheck "inherit" and manually define your LAN's internal DNS domain name.
for "Send All DNS Lookups Through Tunnel" uncheck "inherit" and manually select "no".
For reasons I've not yet figured out, Yosemite does not like tunneling all DNS lookups through the tunnel.
If this is a sticking point for your environment, you may need to define a separate Group Policy for your OS X users until Cisco/Apple figure out their bug.
It should work immediately after disconnecting/reconnecting to AnyConnect.
Don't forget to save your changes!
-Tim

Unable to unistall Cisco AnyConnect VPN - please help

I have upgraded to Windows 8.1 preview on my Surface Pro. My Cisco AnyConnect VPN stopped working. When I uninstalled the software it left the ‘Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64’ under the network adapters in Device Manager. No matter what I do, I cannot uninstall it from there. I tried everything including uninstalling in safe mode. I says it uninstalled but still appears there. I believe because of this, my internet connection performance has decreased tremendously. It also disconnects and reconnects sometime after. My other computers work perfectly with maximum speed.
Please Help.
Thanks,
Mike

Windows Event Log detail as follows:
Faulting application name: vpnagent.exe, version: 3.1.4066.0, time stamp: 0x52211732
Faulting module name: Dbghelp.dll, version: 6.3.9600.16520, time stamp: 0x52e690ac
Exception code: 0xc0000005
Fault offset: 0x00029132
Faulting process id: 0x1e74
Faulting application start time: 0x01d02328f37bd890
Faulting application path: C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpnagent.exe
Faulting module path: C:\Windows\SYSTEM32\Dbghelp.dll
Report Id: 31beb6d1-8f1c-11e4-8278-54271ebdf9a6
Faulting package full name:
Faulting package-relative application ID:

Issue with Cisco AnyConnect Secure Mobility Client in Macbook Pro

Hi all,
I am getting "No valid certificates available for uthentication" message while trying to connect Cisco AnyConnect VPN. I am having a valid certificate in Keychain Access. I couldn't find an option to import the certificate to the VPN. Please help.

There seem to be much more problems with 3.1.04049
Especially with certificate authentication.
I opened some TAC cases.
Try 3.1.04063 that came out at 07-24-13.
TAC said that there are some fixes in it...

CTRANSPORT_ERROR_TIMEOUT with Cisco AnyConnect Secure Mobility Client 3.1.05170

Hi,
I use Cisco AnyConnect Secure Mobility Client 3.1.05170 to connect to my company network and it has been working successfully for a while and until Sunday evening Feb 8.
Today, this solution is no longer working and I've reproduced the same issue on 3 different Mac's which have 10.10.2 (on 2 Mac's) and 10.9.5 (on 1 Mac).
I can navigate on internet without any problem but when I launch the connection in Cisco AnyConnect Secure Mobility Client, it time outs and I get the following errors:
Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type information sent to the user: Contacting <company server name removed for security reasons>.
Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnui[7926]: Initiating VPN connection to the secure gateway https://<company server name removed for security reasons>
Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: processConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 11572 Received connect notification (host <company server name removed for security reasons>, profile myaccess1.xml)
Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 718 Invoked Function: CHostLocator::resolveHostNameAlt Return Code: -29294571 (0xFE410015) Description: DNSREQUEST_ERROR_EMPTY_RESPONSE
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: getHostIPAddrByName File: ../../vpn/Common/IPC/SocketSupport.cpp Line: 322 Invoked Function: ::getaddrinfo Return Code: 35 (0x00000023) Description: unknown
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 730 Invoked Function: CSocketSupport::getHostIPAddrByName Return Code: -31195124 (0xFE24000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: ResolveHostname File: ../../vpn/Common/Utility/HostLocator.cpp Line: 839 Invoked Function: CHostLocator::resolveHostName Return Code: -31195124 (0xFE24000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO failed to resolve host name <company server name removed for security reasons> to IPv6 address
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: logResolutionResult File: ../../vpn/Common/Utility/HostLocator.cpp Line: 913 Host <company server name removed for security reasons> has been resolved to IP address 144.24.19.20
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Writing to hosts file: 144.24.19.20 <company server name removed for security reasons> ###Cisco AnyConnect VPN client modified this file. Please do not modify contents until this comment is removed.
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: respondToConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 4893 The requested VPN connection to <company server name removed for security reasons> will target the following IP protocols and addresses: primary - IPv4 (address 144.24.19.20), secondary - N/A.
Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: getUserName File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1939 PasswordEntry username is nwipfli
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: PeerCertVerifyCB File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 857 Return success from VerifyServerCertificate
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: SendRequest File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1422 Invoked Function: curl_easy_perform Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT 28 : Error
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: sendRequest File: ../../vpn/Api/ConnectIfc.cpp Line: 3191 Invoked Function: CTransport::SendRequest Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: connect File: ../../vpn/Api/ConnectIfc.cpp Line: 481 Invoked Function: ConnectIfc::sendRequest Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: TranslateStatusCode File: ../../vpn/Api/ConnectIfc.cpp Line: 3008 Invoked Function: TranslateStatusCode Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT Connection attempt has timed out. Please verify Internet connectivity.
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: doConnectIfcConnect File: ../../vpn/Api/ConnectMgr.cpp Line: 1963 Invoked Function: ConnectIfc::connect Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type warning sent to the user: Connection attempt has failed.
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 2614 Content type (unknown) received. Response type (host unreachable) from <company server name removed for security reasons>:
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type warning sent to the user: Unable to contact <company server name removed for security reasons>.
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 2724 Unable to contact <company server name removed for security reasons>
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type error sent to the user: Connection attempt has timed out. Please verify Internet connectivity.
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: connect File: ../../vpn/Api/ConnectMgr.cpp Line: 2050 ConnectMgr::processIfcData failed
Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: initiateConnect File: ../../vpn/Api/ConnectMgr.cpp Line: 1181 Connection failed.
Any idea about a solution ?
Thanks in advance
Nicolas

There seem to be much more problems with 3.1.04049
Especially with certificate authentication.
I opened some TAC cases.
Try 3.1.04063 that came out at 07-24-13.
TAC said that there are some fixes in it...

Mail and SMTP server settings of ASA Certificate Authority for cisco anyconnect VPN

Dear All,
i have the folloing case :
i am using ASA as Certificate authority for cisco anyconnect VPN users,the authentication happens based on the local database of the ASA,
i want to issue a new certificate every 72 hours for the users ,and i want to send the one time password via email to each user.
so what the setting of the mail and smtp server should be ,
was i understand i should put my smtp server ip address then i have to create the local users again under(Remte VPN VPN--Certificate management--Local certificate authority --Manage user Database) along with their email addresses to send the one time passsword to them via their emails.
i sent the email manually ,hwo can automate sending the OTP to our VPN users automatically vi their emails?
Best regards,

Thanks Jennifer.
I did manage to configure LDAP attribute map to the specific group policy.
Nevertheless, I was thinking whether I can have fixed IP address tied to individual user.
Using legacy Cisco VPN Client, I can do it using IPSEC(IKEv1) Connection profile, where I set Pre-Shared Key and Client Address Pools. Each Client Address Pools has only 1 fix IP address.
Example: let say my username is LLH.
Connection Profile for me is : LLH-Connection-Profile, my profile is protected by preshared key.
Client Address Pool for me is : LLH-pool, and the IP is 172.16.1.11
Only me know the preshared key and only me can login with my Connection Profile.
Using AnyConnect, I have problem. User can use any connection profile because I cannot set preshared key for AnyConnect. In that case, I cannot control who can use my Connection Profile and pretend to be me.
Example:
AnyConnect Connection Profile for me is : LLH-Connection-Profile, without any password
Client Address Pool for me is : LLH-pool, IP is 172.16.1.11
Any body can use LLH-Connection-Profile, login with another user name, let say user-abc which is a valid user in LDAP server. In that case, ASA assign 172.16.1.11 to user-abc and this user-abc can access server which only allow my IP to access.
I hope above description can paint the scenario clearer.
Thanks in advance for all the help and comment given.

Cisco AnyConnect VPN client and 256 AES encryption in IE8

Hey,
We have a site that we are trying to connect to with the AnyConnect VPN client version 2.5.3055 on Windows XP SP3. As soon as we enter the site info and hit select, it says a connection was unable to be established.
I believe this has to do with the encryption, its set up with 256 bit AES. We are only able to install IE8, which on XP only supports up to 128 bit encryption, so in IE8 the page will not load. To fix that issue we installed firefox which supports 256 bit encryption. We can get to the page there, but when we go to connect to the same site VIA the VPN client it still will not connect. It will work fine on a windows 7 box with IE9 installed from the same network.
My question mainly pertains to how the AnyConnect client connects on the back end. Does it use Internet explorer's SSL layer by default? Or does it have its own? If it connects through internet explorer, is there a way to change it to firefox so it will actually be able to open up a connection?
Thank you for your answers in advance,
John

Hey Jeff,
Thanks for answering that question. Hmm, so it doesnt go through the browsers SSL layer. We have systems on the same network (same proxy, firewall, vlan, etc). All the systems with windows XP SP3 and IE8/IE7 can not connect to the VPN (they arent even able to start the connection and ask for proxy/logon info.), all the systems with windows 7 and IE9 can. Same setups on each one as far as the security policies go as well. I thought it may have to do with the 256 bit encryption that they are using.
If thats not the case, what else could be causing the problem? weve tested it on about 5 XP machines and 5 Win 7 machines, same results on each. Connects on Win 7, does not connect on Win XP.
Thanks,
John

Having trouble with in app purchases after ios7 upgrade?

I'm having trouble with in app purchases after ios7 upgrade

I'm having the exact same problem. Unfortunately, I can't tell you what is causing it, but I can tell you what it isn't(at least in my case). I made an in app purchase yesterday using a MasterCard I had linked to my account with no problems. This morning, my card from my new bank came in so I switched it over(American Express), and all of a sudden can't make IAP. I thought maybe there was an issue with the card, so I tried it out on a .99 app, and it worked no problem. So I got with tech support and they had me reset all of my phone settings -_-, then my network settings. No change. I tried restarting the phone obviously, closing the App and trying again, no luck. They suggested I call my bank and make sure the address I had on file for the card matched what I supplied for my Apple account, and that didn't fix it either. I tried IAP on two different apps and it was the same, could not connect to App Store error. I'm still trying to figure it out, and I'm sorry I can't be of more help, but I hope I at least save you some trouble of trying these things. If I find anything out I'll let you know.

I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-

Hi, everyone.
I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
Thanks,
Fabian Alberto Campo
MCT-MCSA 2012-MCITP365-MCTS
Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, Colombia

Hi Fabian,
Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
Actions pane to reset OWA virtual directory.
Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
Regards,
Winnie Liang
TechNet Community Support

Trouble with Cisco AnyConnect VPN after getting new Airport Extreme

Similar Messages

Maybe you are looking for