Trouble With Clip Audio Tracks

I am importing DVCProHD24P footage from an external drive where each clip has 4 audio tracks, but once its imported only one audio track shows up, both in the tracks column of the browser as well as in the clip's item properties.
I thought something must have gone wrong when I copied the footage from the drive I got it from (originally imported from Pcards), but when I took my drive back and imported the same clips off my drive onto their system all four channels were there!
They have FCP5, I have FCP4HD, but all our audio settings seem to be identical. This is the first time I've worked with HD footage on my system, could that possibly be the problem? I'm sure I'm missing a setting somewhere but I'm stumped! Thanks for any help/troubleshooting ideas...

FCP HD won't support the P2 files you have. You need at least FCP 5, and if it were me I'd totally take advange of the crossgrade Apple has right now. If you only have FCP HD, you can upgrade to the Universal version of the entire studio for 199 bucks... link here: http://www.apple.com/universal/crossgrade/ You'll need Tiger to run it on too.
Jerry

Similar Messages

Trouble with 2nd audio track when exporting to Quicktime - please help!

Ok - I've made my DV movie in IMovie - all ok. When I export to Quicktime the second audio track (an mp3 imported from iTune) jumps up in volume unexpectedly but always in the same place. There is no such jump in the original and I haven't put in any nodes to boost the volume etc.
Any ideas guys??
Thanks
Les

Hello,
Further reading and search in this forum make me think I was right : it seems to be an iMovie 6 bug.
http://discussions.apple.com/thread.jspa?messageID=2037970&#2037970
I would suggest to have the maximum number of person reporting a feedback to Apple to get a quick fix
http://www.apple.com/feedback/imovie.html
Thanks
Seb

Sync multiple video clips with one audio track

I'm an FCPX noob, trying to sync some clips. I recorded a 1.5 hour concert with a DSLR along with an audio track using a separate digital recorder. I have seven video clips, all in sequence (stopping and restarting the camera because of clip length limitations) and one long audio track in WAV format. The audio track is longer than the combined video clips, and there are some short dead spaces in between the video clips when I turned off/on. Now I'm trying to sync them but when I do, the video clips get stacked together with lots of overlap.
I made a test with 3 minute video and audio clips and had no problem. But when I try to do the whole event, I get a jumbled mess.
I could cut the audio into pieces and sync each piece with its corresponding video, but that seems to defeat the sync process, as well as being a lot of work. And, wouldn't I end up with lots of overlap anyway, since my audio clips would have to be longer than my video clips?
Am I missing an easier way to do this, or a way to arrange things better? I can't imagine the problems with several cameras and several audio tracks; my project is actually pretty simple, since it is very linear.
Any suggestions? Thanks--

BobFromIN wrote:
Sorry to take so long getting back to you. Thank you for this advice, but I'm not sure I'm doing it correctly. Is there a way to set the angle on all of the clips at the same time?
Yes. Select all the clips you want in the browser, and then in the inspector fill in the camera angle with the value you want. This can be just about anything, it does not have to be a number. I prefer to name it something meaningful, like "wide" or something.

Working with multiple audio tracks

Hello,
I'm working with video clips that have a stereo audio track (guide audio fed into the camera) synch'ed to 4 mono tracks (recorded from a variety of boom mics and lavaliers).
Although I've linked all the audio clips to the video, it still gets a bit cumbersome when performing T or L cuts. When I hold down the Option key, I still have to adjust each of the audio track separately.
Is there a more efficient way to deal with multiple audio tracks? Maybe some way to treat these audio tracks as one unit?
BTW I'm working in FCP 7.
Thanks,
Thien

One way:
Lock the video track.
Use the Edit Selection Tool to Select the audio transition points
This will automatically open the Trim window, where you can move the cut point - in this case I am moving the audio cut(s) 30 frames later than the video cut:
which gives me the displacement of all the tracks that I wanted:
You can use this quite quickly once you get used to it.
MtD

Can you export a Quicktime with multiple audio tracks?

I have a video with split audio tracks.
I'd like to archive a copy that retains all the individual tracks so that other people could just open the file later and not have to reconstruct the tracks (i could certainly archive all the tracks individually).
the problem i'm having is that FCP seems to only want to allow me to export 2 tracks of audio. I may be missing a setting, but i'm not sure.
I can digitize a clip from a digibeta with 4+ tracks, and when i open the clip in QT, it recognizes the individual tracks, so it seems as if the capabilities are there.
have they just not been integrated yet?

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

Why video with two audio tracks imports like one track (main)?

Ok, lets face one simple thing that is incredibly stupid in Premiere CC:
- I make video with two audio tracks (screencast with system sounds and microphone, separated)
- Import it to Premiere CC and see only one audio track, system sounds!
- What should I do to see both of them?
- Why Sony Vegas don't make me to go to support forums and make them both visible without extra actoins?

Great first post!
Ok, lets face one simple thing that is incredibly stupid in Premiere CC:
Channel Map the Audio to do what you want it to do with t e source clip.
Why Sony Vegas don't make me to go to support forums and make them both visible without extra actoins?
You could have read the Premiere Manual or watched the Adobe TV Tutorials or gone to edit school instead ...

I down loaded ios7 and now I'm having trouble with my audio on Skype, does anyone knows how to fix it? Please help!

WWith the new ios7, I became frustrated in using my iPad3..I'm using Skype as my main communications with my love ones back home,now it seems that ios7 doesn't help me a lot for I'm having trouble with my audio communication coz my family can't hear anything from me.. My skype doesn't have any options or settings that I can check with to see if I can fix it...I need help...please if any of u knows how to fix it..I would greatly appreciate it...

You can try removing app then reinstalling. If that doesn't work
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Trouble with clipping paths in Photoshop CS5

Hello everyone, I am having trouble with clipping paths in Photoshop CS5. When I start a new path both path and anchor points are not visible. working on a Layer not background 0 and a Path Layer was created.I've also noticed that Photoshop started running pretty slow. All other programs are fine. Any Ideas or suggestions? Thank You

edtGrfx wrote:
Hello everyone, I am having trouble with clipping paths in Photoshop CS5. When I start a new path both path and anchor points are not visible. working on a Layer not background 0 and a Path Layer was created.
What do you mean by "a Path Layer was created"? Path are in the path palette, there is a path in shape layers and they is a path in a vector layer mask. I have never seen a reference to a path layer before this. When a path in the path palette is selected activate it wall also be shown in the image window. Does not matter if there is a targeted layer or not. Control points may or may not be displayed. Using Path tool you can select and select segments and show some or all control points, Path are editable.
View the following image in a new tab and scale to actual pixels for a clear image this site scales image poorly.

Export to Quicktime with multiple Audio Tracks?

Hi all --
I am on a tight deadline (48 hrs!) to deliver a Quicktime Prores file with 6 audio tracks: ch 1+2 dialog, ch 2+3 music&effects, ch 4+5 stereo mix. I'm working with FCP 6.
Now, I have figured out how to export the FCP 6 project to a Quicktime file with multiple audio tracks (in the Project settings, I specify 3 stereo channels, then I assign each audio track to one of the channels and export everything to a Quicktime file).
However, how can I send a stereo mix to channels 4+5?? FCP only allows me to assign each audio track one but not multiple output channels, and I didn't see a way where I could create a bus.
Can anyone help?
Thanks!

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

I'm having trouble with the audio on a lot of my games. How can that be fixed?

I'm having trouble with the audio on a lot of my games. How can that be fixed?

You need to be more specific. What sort of trouble - no audio, low volume, scratchy sound, etc.?
 Cheers, Tom

Help importing WMV files with 4 audio tracks....

Hello,
I am using a PC to run a robot show. The show runs off of WMV files recorded with 4 audio tracks.
The "front" audio tracks are the left and right chanels for sound.
The "rear" audio tracks are the signals the show runs off of.
(If you want to see the show... it's here http://www.yorkmiss.com/Curtains.wmv
I run the audio files using the windows media player and as you can see... it works fine.
However, I would like to use the I-tunes player since I can then controld the show remotely using my I-Touch.
The problem is that every time I import one of the audio file into I-tunes, it converts it to a new type of file that "blends" the front and rear chanels of audio together.
I've tried every different option in the import prefrences list - and they all have the same result.
Does anyone know a way of playing the files "as-is" without converting them, or is there a way of converting them I do not know about?
Here's an example of one of the files:
http://www.yorkmiss.com/ShowbizKylesmom_504.wma
Any help or suggestions would be welcome and appreciated!
Thanks in advance,
Beth

Yes, I understand that now... but is there a way to convert to those file types while still preserving the 4 seperate audio chanels?
Thanks, Beth

How to burn a DVD with two audio track?

There is a projet with the original video and a second audio track with music. I want to burn a DVD with both audio tracks. When playing the DVD you should be able to select audio track 1 (the original sound) or audio track 2 (the music). With Adobe Encore DVD it was easy to configure the two audio tracks and burn the DVD. It is posible to do the same from Adobe Premier Elements 11?
Thanks,
Jordi

Welcome to the forum.
Unfortunately, PrE does not allow for supplemental Audio Tracks, when authoring.
I use Adobe Encore for this, but it is only available bundled with Premiere Pro. I do not know if some other, third party, full-featured authoring apps., like Sony's DVD Architect can do that, but I would suspect that they can. The specifications for DVD Architect should have that information, and as it's quite common in full-featured authoring apps., I anticipate that it has that capability.
If you do go with that program, our MOD, Steve Grisetti, has written a very good book on DVD Architect, and it's available at Muvipix.com.
Good luck,
Hunt

QT H.264 files with two audio tracks. Quicktime plays 2nd track first. ***?

I've been experimenting with H.264 (AVC) and my DVDs. Using Handbrake, I ripped a DVD to MP4 (H.264) and including the director's commentary as the second track.
When I play the MP4 with Quicktime Player, it plays the director's commentary instead of the main soundtrack. VLC, however, correctly plays the first track (main movie audio track) and it allows me to select the second track via a menu.
To get Quicktime to play the proper track, I have to open "Movie Properties" and manually uncheck the second track. This was never a problem with DivX/XviD encoded files with two audio tracks; Quicktime Player correctly played the first track.
Why does Quicktime ignore the first audio track in MP4s (but not AVIs) and is there a way to correct this?

I do have QT Pro.
H.264 files are usually saved in a MP4 container. That's what Handbrake, ffpegX, and D-Vision create, anyway.
The "Choose Language" option is greyed out (unavailable) when I open this H.264 MP4 in Quicktime. If I try to change the settings in "Movie Properties," it says that I must save it with the .MOV file suffix.
It makes no sense to me that Quicktime Player can correctly identify the main audio soundtrack in a XviD file with an AVI container but not in a H.264 video with a MP4 container which Apple has been touting as the latest, greatest thing. Even VLC, an open source product still in beta, gets it right.

Quicktime movie with 3 audio tracks. Can't select audio track!

I have a movie containing 3 audio tracks (3 different languages):
Format: H.264, 720x304, 16,7 Mio
AAC, Stereo (L R), 48.000 kHz
AAC, Stereo (L R), 48.000 kHz
AAC, Stereo (L R), 48.000 kHz
When I play this movie with Apple Quicktime I hear a mix of all 3 languages at the same time. How can I select each audio track separately. With VLC player (freeware) it works fine.
Is the selection of the audio tracks a feature of Quicktime Pro or is this a bug in Quicktime?!

Hello lildog, hello QuickTimeKirk,
Thank you for your answer. In the meantime I solved this problem. It is caused by the program ”MP4Box” which I used to create the video with the 3 audio tracks. Apple Quicktime and iTunes needs ”very special” header settings inside the mp4 container. A new version of MP4Box with special switches for this case solves the problem. For more details see this thread on the gpac/MP4Box project homepage: http://sourceforge.net/forum/forum.php?threadid=2345177&forumid=287547
The VLC Player is much more docile with multiple audio tracks.

Newbie Question - Creating DVD from Premiere to Encore with 2 audio tracks

Hello and thanks for your time,
I'm pretty new to all this but seem to be getting the hang of things pretty well but one problem I'm having I can't seem to find an answer to.
In Premiere I am creating a dvd of a football game, i have the video with an audio track of the crowd and another audio track of the commentary. These are all edited together fine and work well. I then use the dynamic link to send the sequence to Encore and that's where the problem occurs.
I can't seem to get both audio tracks to appear in Encore? Any suggetions or tips on where I might find an answer?
cheers for the help and time
Ian

Ian,
This is not a cure to the issue, but is a workaround. It's the "old-fashioned" way that things were done before DL.
Export your Sequence as elemental streams, i.e. video-only and audio-only. Import your video-only file into Encore as a Timeline, and teh audio-only file as an Asset. From Project Panel, drag the audio to the appropriate timeline. Done.
Now, exactly what you choose for your Export and even how you do this will depend on your Project in PrPro and also your source Assets. For SD material, I'd choose DV-AVI Type II video-only (no multiplexing), and for the Audio 48KHz 16-bit PCM/WAV. If you have a version of PrPro prior to CS4, just Export Movie (settings above) for the Video and Export>Movie (or AME) for the Audio (settings above). Just make sure that the Export Video is checked for the DV-AVI, but the Export Audio is not. Change these two checkboxes for the Audio.
Now, for DL not working, as it should, what is the format of your source Audio? Do you have any Channel-mapping used? Does your Audio Mixer Panel show everything right there? Do you have one Audio Track either Muted, or Bypassed. Look in Audio Mixer, to make sure you do not have one Track Solo'ed.
Also, what version are you using, CS3, or CS4? Note: for CS4, you will use AME for the Exporting in the first part of the post.
Good luck,
Hunt
PS - welcome to the forum

Trouble With Clip Audio Tracks

Similar Messages

Maybe you are looking for