Trouble with connecting with wi fi and cellular

my I-Pad says it cannot connect to the server when in wi fi or cellular although my husband's i-pad is working in both

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

HT204204 Having trouble to connect with bluetooth

Why i having trouble to connect with bluetooth woth other smartphone? I have already try to connect with bluetooth beetwen my iphone 4 with iphone 6 ? While my iphone 4 have already upgrade to ios 8

never mind. I fixed it. After uninstalling and then reinstalling iTunes all start to work. Thanks anyways

Trouble in connecting with windows xp client

Hi I am using windows 2008 r2 enterprise server. Actually I have downgraded 2012 licence to 2008.
I have configured it for PEAP-MSCHAPV2 using NPS and active directory. But windows xp wireless client is unable to connect with PEAP or TLS.
I got the log as "unable to process the eap type".
Is there any issue with the certificates or configuration?
Please assist me about the configuration of windows 2008 r2 enterprise server for TLS and PEAP-MSCHAPv2 and configuration of windows xp wireless client so that the connection is successful.
Assist me on how to configure certificates in server and client side.
Thank u in advance
Goutham M S

Hi,
Have you installed the certificate on the client computer? If you designate a certificate that is not installed on client computers, authentication will fail. For more detailed information about EAP, you can view the link blow.
Extensible Authentication Protocol (EAP) Settings for Network Access
http://technet.microsoft.com/en-us/library/hh945104.aspx
Hope this helps.
Steven Lee
TechNet Community Support

HT204368 Problems with connectivity between iPhone 4S and Jawbone!!

I have a Jawbone bluetooth headpiece. Recently I have had problems with intermittent connectivity with my iPhone 4S. The Jawbone is searching for the phone but sometimes it doesn't connect and when it does it will lose the connection after a few seconds. This is a serious problem since I use it when I'm travelling on business. I have installed the latest software updates in both devices, unpaired and repared and also reset the Jawbone. Any ideas?

Basics from the manual are restart, reset, restore
Follow the 3R's- if a restart does not solve your problem proceed
User troubleshooting is:
1.restart, ie power off/on,
2. reset http://support.apple.com/kb/HT1430,
3. restore from backup, restore as new device. http://support.apple.com/kb/HT1414

Problems with connection between nintendo wii and cisco 871w.-

Dears,
I have a problem connecting my Nintendo Wii via wireless with a cisco 871w.
I tested with different encryption (WEP, WPA2 and open) to no avail.
The console gives me errors when testing the connection (number 51 330).
Any other device I connected to the wireless network works flawlessly (Notebook, iphone, nokia phones)
The network configuration to be open is:
ip dhcp pool VLAN20
   import all
   network 192.168.2.0 255.255.255.0
   default-router 192.168.0.1
   dns-server XX YY
   lease infinite
dot11 ssid Wii
vlan 20
authentication open
ssid guest-mode
interface Dot11Radio0
no ip address
ssid Wii
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
channel 2462
station-role root
I change the channel, the encryption. Leave the console with fixed ip, not works!
Thanks for your help.

Please show me what commands you used to make these changes.
Thanks!
Mi config:
interface Dot11Radio0
no ip address
no dot11 extension aironet
encryption vlan 10 mode ciphers tkip
encryption vlan 20 mode ciphers tkip
ssid Agrolate
ssid Pamelie
mbssid
speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
channel 2462
station-role root
no cdp enable

Trouble re-connecting with my email

Yesterday, my sympatico.ca email was down for most of the day. When it came up, I was still unable to access my email with my Blackberry. After much fiddling around, I finally deleted the account and have tried to set up a new account several times...it just won't connect with sympatico. Any ideas? Thanks

Hotmail and outlook.com services were down for a great many users this past 24 hours. This was a hotmail/outlook.com issue, not BlackBerry.
Yes internet, Outlook is down (Update 2: Service mostly restored)
Try this: Article ID: KB33637 Unable to integrate or send from a Sympatico or Bell Aliant email account on the BlackBerry 10 smartphone
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problems with connection with Oracle Database (Dreamweaver)

I'm trying to create a connection with a oracle database, with JDBC.
In order to do that, I've downloaded the classes12.zip driver in my machine. This is the driver from Oracle.
I've put this file into directory c:\Program Files\Macromedia\Dreamweaver MX\Configuration\JDBCDrivers.
So, I've gone to Window -> Application -> Databases menu into Dreamweaver MX, clicked in the plus (+) signal and choosed Oracle thin Driver (Oracle).
I've filled thin window with the following values:
Connection name: conn1
Driver: oracle.jdbc.driver.OracleDriver
URL: jdbc:oracle:thin:@machinename:1521:SID
Username: ....
Password: ...
When I click in the Test button into this window, the following success message appears:
Connection was made successfully!
But when I go to Bindings window to build a Recordset, the connection doesn't get the tables, and the following error message appears:
Unable to retrieve tables from this connection, click on 'Define...' button to test this connection.
Does somebody know the answer for this problem?
Thank you.

Don't bother with a loopback adapter unless you are using a laptop that needs Oracle to work whether connected or unconnected to the business network. Much simpler to just arrange for DHCP to assign you a fixed IP address (a lease reservation).
It's the change of IP address which trips Oracle up, not the existence of DHCP. So if you can make sure your IP address will be the same, no matter how you acquire it, that's all you have to do.
Installing a loopback adapter which isn't the primary interface at the point you install Oracle will mean your installation will get very confused as to whether to address things via the 127... address or the "normal" IP address. And yes, at that point, you'll not be able to connect to instances, or run listeners or do all sorts of other things reliably.
If it were me, I'd uninstall the mess you probably now have as far as Oracle goes, install something like VirtualBox (free) or VMware Workstation (costs) and enjoy your Oracle experience inside the confines of a virtual machine whose networking setup you can configure and control to your heart's content, without it screwing up your real machine's ability to connect to your work's network when it needs to.

Problem with connecting with apple support

Gosh I just want to get support for Apple TV. Been jumping around link to link and discovering very un user friendly. Easy to put in discussion. Guess the movies I rented will never get watched but thats ok they already have the money for them.

I now solved my issue by buying a DVI -mini display port adapter and connecting through my DVI cable to the monitor. But APPLE ...this is not good! you should resolve this issue so it is possible to connect with a HDMI cable.

Problem with connection with db netbeans

hello all!
i created a db in
jdbc:derby://localhost:1527/simple [demo on DEMO] ---->Demo
my user name demo and the pass demo
in the info of the db i get this:
display name:
jdbc:derby://localhost:1527/simple [demo on DEMO]
the problem lines is
Class.forName("org.apache.derby.jdbc.EmbeddedDriver");
and
Connection con = DriverManager.getConnection("jdbc:derby://localhost:1527/simple", "APP", "demo");
i tried to change the APP to demo but the same.
the errors are:
java.lang.ClassNotFoundException: org.apache.derby.jdbc.EmbeddedDriver
java.sql.SQLException: No suitable driver found for jdbc:derby://localhost:1527/simple
the img of the work is here:http://yfrog.com/0cimpatg
thanks for all!

user12163960 wrote:
thanks the first line ok! THE LINE IS WORKING NOW:
Class.forName("org.apache.derby.jdbc.EmbeddedDriver");
now i have problem with:
Connection con = DriverManager.getConnection("jdbc:derby://localhost:1527/simple", "APP", "demo");
the error:
java.sql.SQLException: No suitable driver found for jdbc:derby://localhost:1527/simple
You should really read the Derby manual.
When you use a url with jdbc:derby://localhost: then you must start a Derby server first.
If you want to use the embedded engine, the URL is: jdbc:derby:/path/to/database
More details are here: http://db.apache.org/derby/docs/10.6/devguide/cdevdvlp34964.html

Trouble with connecting to an App and restoring In App Purchases

I am having trouble with restoring my in app purchases. I had purchased the full season for crazy night out a while back but when I got the app again after restoring the app the full season wasn't on and it is trying to charge me for it. I had also bought the fantasy date app and the multipacks and unlike crazy night out it recognizes I made the purchase but when I click restore purchases or buy pack it won't download and it says can not connect to server and for me to check my settings and try again also for the ones I do have that were free when I click play or download all videos it says it can't connect to servers and the videos don't play. Is there anything I can do to retrieve these purchases back and get the videos to play.
It's not the Internet everything else works.

ftp doesn't work well in modern network environments, and the design of the protocol itself is basically incompatible with the inclusion of firewalls in modern networks. And it transmits the authentication credentials in cleartext.
Put another way, see if ssh and particularly sftp works here (either directly via the sftp command, or via a sftp GUI tool) works for your requirements.
Failing that, [here is ftp set-up information|http://labs.hoffmanlabs.com/node/942].
If it's the DNS set-up, then here is some [DNS server set-up information|http://labs.hoffmanlabs.com/node/1436]. And your Mac OS X client will need to have access to the same DNS information your server is using.

Problems with connection Creative zen M and DVD-CD pla

Hi,
I have problems whem i connect my zen to the DVD player. I've connected zen with a cable going from the headphones to the audio line in (red and white) at the back of the DVD system. I get sound but the problem is that my zen automaticly switch to the FM radio mode, when it should be playing from the music libary. This happens by 70% of the numbers. How can I deal with this problem?
Problem 2 is that I hear a strong noise when I connect my zen to the DVD player. It's al low sound which comes back in all the 5 boxes en sounds like a bee...
Problem 3 is that I can't get the full volume on the DVD system. Even when zen is max on 25 i've to put the DVD system also max before a normal sound is coming to me...
Can anybody please help me? Thanks!

Hi there,
. The reason the ZVM is switching to fm radio is because the headphone jack also supports a wired remote that controls some of the ZVM functions there will be some sort of back feed from your DVD head unit to the ZVM causing this to happen.
2. The headphone jack does carry a bit of noise when used with line in applications and compared to the line out function of the ZVM is muffled and lacks power(this also could be noise in your DVD unit).
3. Same as above(2) the A/V out function has a set volume and is louder and much clearer than the headphone out jack.( The line out is the A/V out function of the ZVM found in the supplied adaptor that plugs into the bottom of the ZVM)
To overcome this problem simply use the line out function of the ZVM either through the dongle and an A/V cable or get an after market cable to suit and that should solve your problems with this type application.
Let us know how you go with it
Heres the bits
http://us.creative.com/products/prod...7&product=4484
Or you can search for a cable that plugs straight into the bottom of the ZVM and has rca's on the other end, you should be able to find then via a search here or through epizenter.net in one of the threads
Message Edited by AussieBoy on 08-0-2006 09:50 PM

Problems with connect to Em console and IE6.0 with sp1

After installing OEM10g on W2K (server) and trying to connect and login to the management console (http://<servername>:80/em ) with Internet explorer I got the message that my IE browser was to low (5.0) and I have to upgrade to IE5.5 or higher. So I decided to install the newest IE (6.0 + sp1) and tried again to login to Oracle Enterprise Manager but getting a script error now.
The strange thing is that I can connect (same way) from my own pc but there I have IE 6.0 without sp1 and there it works fine.
Is this a bug or is there an option in IE6.0 sp1 to disable/ignore the scripting error ?

I found there's a patch available for IE6SP1 from microsoft :
Overview
In the last few weeks you might have experienced difficulty logging on to secure Web sites or completing transactions on the Web. You might also have noticed more HTTP 500 internal server error messages.
If you have been experiencing these problems recently, then your computer might have a recent security update installed (Cumulative Security Update for Internet Explorer MS04-004) that changes how Internet Explorer sends information to the Internet. Some secure Web sites do not work well with this security update and might cause you to experience the problems above.
I have installed this patch, but it still doesn't solve my problem.
Perhaps because this patch is for IE6sp1 (64 bits), I have the 128 bits version.

X1 Carbon / ThinkPad USB 3.0 Dock: Issues with connecting with more than one Dock

Hello fellow users / Lenovo,
In our office we have several X1 Carbons and several ThinkPad USB 3.0 Docks (0A33970) located all over the office. We typically bring our X1 Carbons around and use each other's Dock during the course of work.
However, we recently face a problem with the Ethernet interface not working with other Docks, other than the Dock that the driver was installed with.
Using other Docks, the Ethernet interface comes up as a generic Ethernet device with a yellow warning triangle inside Control Panel.
Using the Dock that the driver was installed with, the Ethernet device works as normal.
It should be pretty easy to replicate this behaviour, just get an X1 Carbon (fresh, Windows 8.1) and connect a USB 3.0 Dock to it, and install appropriate drivers.Verify that the Ethernet port works correctly.
Next, disconnect the Dock and connect another Dock to the X1 Carbon. Observe that the Ethernet interface does not work, and see the yellow warning triangle icon under Control Panel.
Uninstalling and Reinstalling the drivers with the new Dock doesn't work either. Only the Dock that the driver was originally installed with will work.

Would love an official response to this.

I had a problem with connection with wireless printer, I had to delete. But I cannot install back. Printer HP officejet 6700

Please anybody can help me with installation of HP officejet 6700 on MacBook Air.
It stopped working, I could not find printer to connect, therefore I had to delete but I cannot install back again.

So the printer is no longer shown in the System Preferences > Print & Scan window? If you haven't already, you can power the printer off and on, then try to set up the wireless connection again and see if MBA recognizes the printer.
You'll need to provide us with more info so we can try to help.

Trouble with connecting with wi fi and cellular

Similar Messages

Maybe you are looking for