Trouble with cut and paste password for wireless network

Command - C, Command-V did not let me paste wireless password from text edit. Any suggestions as to why? I was able to do so with right click.

It is one of mine. Yes. It connects to it no problem, just doesn't connect to the actual internet. Network diagnostics has all green lights until the ISP and/or Internet point. If I walk through diagnostics, it will get to the point where it says that the network requires a WEP password. I don't know why it does that because my network is not password-protected (husband claims it doesn't work well with his VPN system to get into work network). If I leave it blank, the connection will work. Eventually, after the computer is put to sleep, I will have the same problem upon waking up. I just tried renaming the network and removing all preferred networks and rebooting. Let's see how that works.

Similar Messages

  • The password for wireless network was changed.  Airport keeps trying to sign in automatically with old password and won't let me put in new password. Any ideas?

    The password for wireless network was changed.  Airport keeps trying to sign in automatically with old password and won't let me put in new password. Any ideas?

    You really should change both the wireless network name and password to avoid potential conflicts with the old and new settings.
    Suggest you give that a try.

  • Risk with Locking and changinf password for SAPCPIC

    Hi All,
      Please advice if there is any risk with locking and changing password for SAP standard user SAPCPIC .We are on system 4.6D .
      Somewhere I could find that if there is any RFC destination defined with this user then it may cause problem after locking .I found following entry in RFCDES table .
    a       I                                          
    M=200,U=SAPCPIC,L=E,v=3FB20DF66CA32E419606388B51,   
    But I could not find any entry in sm59 for this .What is this entry as it is not there in SM59 .
    Any other known risks pls tell me .
    Thanks,
    Chittaranjan

    Can password of SAPCPIC user be changed without any problem?
    We are on ECC6.
    Report RSUSR003 refer to note 29276 and note says that changing password will cause problem with SM51 and some other report as the password is hard-coded there. Though this note seems to be bit old.
    Edited by: Pawan Kesari on Jun 9, 2009 7:58 PM

  • Network diagnostics asks for password for wireless network with no security

    hi
    I am trying to connect my Mac Pro to a wireless network which has no security settings. Other Macs in the house connect to the network with no problem, but the Mac Pro doesn't. I am setting up a new network as I have moved house. In the previous house the wireless worked fine on the Mac Pro.
    When I click on the Airport Icon in the menu bar, the search wheel shows and it finds the network, but when I click on the name of the network typically it doesn't connect. Occasionally it does connect, and I briefly have internet access, but then the number of bars on the Airport Icon gradually reduce and then I can't connect again.
    When I run Network Diagnostics from Safari, it finds the network also, but then typically asks for a WEP password for the Wireless Network when I haven't added any security to the network (occasionally it doesn't ask for a password and I can connect briefly)
    I have tried resetting my Time Capsule and creating a new wireless network with a different name, but still experience the same issues.
    I wonder if someone has any ideas as to what might be going on, and how I might be able to troubleshoot this.
    Thanks
    Nick

    It is one of mine. Yes. It connects to it no problem, just doesn't connect to the actual internet. Network diagnostics has all green lights until the ISP and/or Internet point. If I walk through diagnostics, it will get to the point where it says that the network requires a WEP password. I don't know why it does that because my network is not password-protected (husband claims it doesn't work well with his VPN system to get into work network). If I leave it blank, the connection will work. Eventually, after the computer is put to sleep, I will have the same problem upon waking up. I just tried renaming the network and removing all preferred networks and rebooting. Let's see how that works.

  • I just my iMac. I would like to compose a letter to a document, make corrections, then cut and past it for e-mail. how do i do it?

    I just bought an iMac. I would like to write a letter to a friend using word document. I then would cut and paste the letter and send it via e mail. How do i do it?

    You can use Text Edit located in your Applications folder.
    For assistance with that app click Help from the Text Edit menu bar.
    Or, you can purchase Pages from the App Store.
    You can access the App Store from your Apple menu > App Store
    Or the App Store icon in the Dock 
    Or your Applications folder.

  • Problems with cut and paste

    Hello.  I have an iphone 3g with which I successfully cut and pasted links and other such items for quite some time; however, over the past week or so, every time I copy a link or text, when I go to paste it, a youtube link gets pasted.

    Try a Reset... you will not lose any Data or Settings...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Quality Compromised with Cut and Paste?

    I have an iMovie that I already shared in media browser so I can burn to DVD. Now, I have a few extra minutes I want to add to the film.
    If I cut and paste the film in iMovie's Project Library so that I can then add the extra footage...Does this compromise the quality at all?

    I get double pasting when paste to IDE using mouse i.e. right click and select paste. However if I do ctrl + v then the above does not happen.
    Windows xp, dell latitude D400.

  • Help with cut and paste

    Hello. Need a little help please. I have a 21 page pdf file. I would like to cut the text and paste into MS Word. By doing "select all" I am able to do this but only 1 page at a time. Is theire a way to extend the selection so that I get all 21 pages of text?
    Thanks for your suggestions.
    Hopken

    A PDF that contains a scanned image of a textual document will result in a 0 KB text file when Save as Text is used while viewing the PDF.
    If OCR is applied to the PDF (with Acrobat as Reader does not provide this functionality) then Save as Text exports the OCR output to the text file.
    When using Reader's select tool to select and copy the page content (the image) it is the image that is pasted into the Word file.
    A PDF that has no renderable content has nothing to export to a text file via Save as Text.
    So, it would appear that the copy image - paste image, 1 page at time, is what will have to be used.
    A quick addendum -
    If your working with an image of text and have Office 2007 you may be able to use Microsoft Office Document Imaging tool (not sure if tool is available in all Office versions) once the images are in a Word file.
    Be well...
    Message was edited by: CtDave

  • Problems with cut and paste within the code editor in JDeveloper 10.1.3 EA

    Copy and pasting doesn't work as expected. If I copy some code and paste it somewhere else, i get completely different code, (it seems to paste a piece of code from somewhere else in the source).
    I tried expanding + signs, this didn't help.
    I'am running JDeveloper on Windows XP Professional.
    Does anybody else have the same problem.
    Is this a bug?

    We've tracked down this issue thanks to Tullio's supplying us with a reproducible testcase. It's related to the "Automatically Copy Paste Imports" preference (which is on by default) in the Tools->Preferences->Code Editor category of IDE preferences. It seems to also be related to having renamed a source path directory to have a name that is only different by case from the name it originally had. Disabling this preference is a workaround for EA1.
    For example, if you started out by creating your workspace with a source directory named "Src", then later renamed it to "src", this seems related to the situation when this issue can occur. Renaming the directory back to match what it was before is another workaround for EA1.

  • Trouble with Copy and Paste

    Im using captivate 7 and when editing a slide element such as atext caption, image or anything really, I cannot copy and paste an item. It makes a sound when I try command C but does nothing. Right click shows options only for slide but nothing for copy options.

    Hi there,
    Are you trying to copy/paste a Title/Subtitle Placeholder or a normal Text caption? Can you please post a screenshot of the object's Right Click menu so that we can understand the issue better?
    Thanks,
    Nimmy Sukumaran.

  • Password for wireless network not remembered

    I am stuck with the following situation. I have a wireless network overhere, which is a 802.1X-type network which consists of a huge number of different base stations connected together, which requires me to login and has TTLS (PAP) type identity control.
    When I configure this into the Internet Connect application, with my password, it connects. However, on reboot, the Finder immediately asks for my password. When I look in Internet Connect, it's still there, but when I look in System Prefs, the password is not there (only a blank field). When I enter it, click OK, and check the dialog again, the password is already gone into the wind.
    I deleted all entries of the network in all my keychains, reinstalled my system and now I've set the keycahin entry for the network accessible by all programs, but that doesn't help me either. I had a Macbook here not long ago, which didn't suffer from this problem (however, it did not reconnect after sleep/reboot all the time, but never asked me for my password).

    Do not check "Remember Networks this computer has joined."
    In Advanced>Preferred Networks, enter the name of your Network. This is how I have mine set up and I have not experienced any more problems like yours, although I did in the past. In Preferred Networks, I have redundantly entered the same name twice, just in case it skips off to the second one. Probably not needed, but it's been working fine like that for a long time.
    However, since I don't have an Airport Extreme, I don't use Airport Utility. Definitely try rebooting the AE. Might try applying or reapplying the 10.6.8 Combo update.

  • Password for Wireless Networks

    I succesfully installed a WRT54GS (v7.2) wireless router on a PC and enabled the security function. When I try to access the wireless network I named and set up, I get prompted for a password, but did not issue one when I set it up. I would like to acccess this network with both a Windows XP and Mac notebook. The windows prompt call for a "Network Key" on the Windows unit and the Mac asks for a "WPA password". How & where can I access this password or change it to my own choice?

    Go here and download the manual and read it.  It will tell you how to set and change the security password.
    Message Edited by sabretooth on 12-06-2008 08:43 PM

  • Problems in Dreamweaver with cut-and-paste

    Hi there.
    I wondered if someone could help with a small problem within
    Dreamweaver CS4. If I have two different CSS style sheets open, and
    I highlight a certain section of one CSS stylesheet to take the
    rule to another CSS stylesheet, for some unknown reason as soon as
    I do "copy" the whole of the stylesheet is highlighted, the only
    way I can stop this from happening is to double-click on the "code"
    button at the top left-hand side of the Dreamweaver window. Is
    there any other way to stop this from happening. I am running
    Dreamweaver CS4 on the windows Vista platform.
    Thank you for reading this post and for any help you may be
    able to give.
    Regards, John.

    Hoorah!
    At last - someone else with the same problem!
    I have been leaving messages on here for ages to try to get some response from Adobe. Someone kindly suggested getting rid of the preferences folder, but that didn't solve the problem.
    I think its something wrong with Dreamweaver CS4. I have reverted back to CS3 until they come up with an upgrade!
    Out of interest does this happen straight away or after a period of time? I found if you quit Dreamweaver and restart it usually its ok for a while.
    Do you also have the same problem editing the code? I find I can't put the cursor anywhere WITHIN a chunk of PHP. The cursor highlights the whole lot. I have to click all over the place until it eventually works as normal - or I have to quit Dreamweaver and start again.
    Are you using a Mac too?
    Regards
    Colin

  • This is the message that I get when I try to save with cut and paste pdf

    Missing File - droppedImage-209.tiff (Slide: 265)
    Missing File - droppedImage-186.tiff (Slide: 257)
    Missing File - droppedImage-189.tiff (Slide: 258)
    Missing File - droppedImage-182.tiff (Slide: 255)
    Missing File - droppedImage-198.tiff (Slide: 262)
    Missing File - droppedImage-144.tiff (Slide: 253)
    Missing File - droppedImage-204.tiff (Slide: 263)
    Missing File - droppedImage-206.tiff (Slide: 264)
    Missing File - droppedImage-200.tiff (Slide: 267)
    Missing File - droppedImage-194.tiff (Slide: 260)
    Missing File - droppedImage-192.tiff (Slide: 259)
    Missing File - droppedImage-124.tiff (Slide: 251)
    Missing File - droppedImage-79.tiff (Slide: 250)
    Missing File - droppedImage-184.tiff (Slide: 256)
    Missing File - droppedImage-134.tiff (Slide: 252)
    Missing File - droppedImage-180.tiff (Slide: 254)
    Missing File - droppedImage-196.tiff (Slide: 261)
    Couldn’t save image. - droppedImage.tiff (Slides: 250, 251, 252, 253, 254, 255, 256, 257, 258, 259, 260, 261, 262, 263, 264, 265, 267)

    To change country/region, go to Settings>Store>View You Apple ID>Country/Region.
    If you have problems contact iTunes:
    Contact iTunes

  • Multiple problems: can't open two windows, browser doesn't close although window disappears, and after working for a while I loose my ability to cut and paste or use drop down arrows

    Maybe two weeks ago I discovered that I could no longer open two windows at a time (I can still open multiple tabs). I am also having problems with cutting and pasting, which is crucial to my on-line job. Plus, when I exit Firefox, it doesn't always shut down, so then when you go to re-open, of course, it won't (unless you go into process and turn it off). I have re-installed multiple times and I have also used restore. Nothing seems to be fixing this and I really, really don't want to use IE, especially for work.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    See also "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * [[Firefox hangs]]
    Maybe also do a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Maybe you are looking for

  • How do i delete other on my iphone, How do i delete other on my iPhone

    I have no space on my Iphpne becaue 'Other" is taking over 9g's on my phone.. How do i detele it off my phone with out loseing everything? Ive tried Restoring the phone more then 4 times but nothing has changed. at some points I had to delete more Pi

  • Minimized Cover Flow on Bookmarks page and now can't get it back

    On the Bookmarks page, I moved the Cover Flow section up so that it disappeared. When I tried to show it again by moving the cursor from the top to bottom of the area is originally displayed, the CF section fails to reappear. How to get it back?

  • Is it possible to transfer my tracks to a new ipod?

    Because I really don't want the hassle of ripping all those CD's again!

  • Struts reusable forms

    First, I am new to struts.           I would like to use a form with different actions. However, depending on the           action the required field(s) would be different. Is there an idiom( or           pattern) used for this type of problem.      

  • Db 10.1.0 and AS 10g (9.0.4.0.0) - listener conflict?

    Hi, I am trying to run a 10.1.0 database and a 10g (9.0.4.0.0) AS infrastructure & portal on the same windows box. The install works and I can access the portal pages. However I can no longer get access to the 10g Database. I followed the installatio