Trouble with D7460 and Mac OS 10.5.5

Hi,
I'm trying to get a new Photosmart 7460 set up wirelessly. Macbook Pro, OS 10.5.5, Airport Express (with updated firmware).
The installation went fine, and I used the newest drivers from the website. The setup on the printer side went fine also -- the printer found the wireless no problem. The HP message center app discovers the printer and reports on its state. So I gather that there is a proper wireless connection between my Macbook Pro and the printer.
However, when I print a file (selecting the correct photosmart printer), it appears to be sending the file, but the PrinterProxy shows that it is "connecting to on port 631" [sic] and "unable to connect to printer; will retry in 30 seconds". It's hard to tell if it actually does attempt the retry, but nothing ever gets printed.
Is this a problem with port 631? Isn't this the IP port that's supposed to be open by default?
Any thoughts on how to get this working?
Thanks!!
Peter

That's right. It requires OS X 10.6.8 or higher.
Upgrade.

Similar Messages

So sick of having trouble with Java and Mac!

I bought myself a brand new MacBook Pro OS X 10.5.8 for around a year ago. Since the first month I've had so many problems with my Java. It's eighter not working, or its is so slow that you can't work with it, at all.
Yesterday I was playing a game, were you're in need of Java. It worked perfectly. Then suddenly, it stopped again. And I tought, since I had not used it for a while, I just had to update it. So I clicked at the "software update" and updated everything. I don't think Java was at the list. Still wasn't working. So I went to Apple.com and searched for the "Mac OS X 10.5 update 10" and found it. I downloaded it, and installed it about five times or something, still not working. I've tried everything that came to my mind to try fixing it, but nothing works. What can I do? I'm so sick of having this problem every time I'm in use of the mac. Realy start to regreat the expensive bought of this mac.
Please, someone help me. I hate the tought of wasting 16 000,- Nok at this pc, when it's not working the way I'm using it..
And sorry for the bad english, I'm only 15..

Hei Kristine, er engelsk ikke så ille!
Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Im having trouble with my i mac it freezes up an some times wont start normally it will jus display a gray and white fuzzy screen (any Help Out there)

im having trouble with my i mac it freezes up an some times wont start normally it will jus display a gray and white fuzzy screen (any Help Out there)

Hello there, DJ ROb E Rob.
The following Knowledge Base article offers up some great recommendations for troubleshooting the gray screen at startup:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Trouble with Mail and Maverick

Trouble with Maverick and Mail - contacts (groups) will not load into address bar in mail.

Check that the mac's preferences for icloud is still connected to the proper account. Be sure photo stream is turned on.
You haven't described what "trouble" your mail account has.

Trouble with installing on mac ppc 10.4.11

I can't install digital editions on my mac ppc running 10.4.11 it says when i try to install "error communicating with adobe id server. please try again later and it says E_AUTH_BAD_DEVICE_KEY. I keep trying, same result. Chatted with adobe, they couldn't help. any ideas. it worked before my puter crashed last time. Any answers????

>hi, using 7.2.1
>
>Re: Trouble with installing on mac ppc 10.4.11
>created by <http://forums.adobe.com/people/Derek+Leng>Derek Leng in
>Adobe Digital Editions -
><http://forums.adobe.com/message/4842875#4842875>View the full
>discussion
>Which ADE version do you use? I think ADE 2.0 supports Mac OS X
>10.6, 10.7, and 10.8 Intel only...
>
>Please note that the Adobe Forums do not accept email attachments.
>If you want to embed a screen image in your message please visit the
>thread in the forum to embed the image at
>http://forums.adobe.com/message/4842875#4842875
>
>Replies to this message go to everyone subscribed to this thread,
>not directly to the person who posted the message. To post a reply,
>either reply to this email or visit the message page:
>[http://forums.adobe.com/message/4842875#4842875]
>
>To unsubscribe from this thread, please visit the message page at
>[http://forums.adobe.com/message/4842875#4842875]. In the Actions
>box on the right, click the Stop Email Notifications link.
>
>Start a new discussion in Adobe Digital Editions by
><mailto:[email protected]m>email
>or at
><http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=3355>Adobe
>Community
>For more information about maintaining your forum email
>notifications please go to
><http://forums.adobe.com/message/2936746#2936746>http://forums.adobe.com/message/2936746#2936746.

I am having all kinds of trouble with itunes and updating my ipad. when I open up itunes, it seems to just sit there, never going to itunes store. when I connect my ipad, I check update and it starts, but then I get this message:backup can't be saved on

I am having all kinds of trouble with itunes and updating my ipad. I open itunes up but it doesn't do anything except open to a blank screen. I try to access the itunes store but it won't go there. When I connect my ipad, and try to update it, it starts and then I get a message that says backup cannot be saved on this computer. I have tried everything suggested to no avail. This is the 2nd or 3rd time I have had problems with itunes. Sometimes I even get a message that I am not connected to the internet.
I have uninstalled and re-installed. Any help?

You might not have enough space left on your hardrive.

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Hi FuzzyDunlopIsMe,
Welcome to the Support Communities!
It's possible that resetting your password multiple times has triggered this security. Click on the link below for assistance with your Apple ID Account:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Here is some additional information regarding your Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account.
Cheers,
- Judy

I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. Can I go back to the older version? I had no trouble with that and I do not like this new version at all.

I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. I went to the forums and tried all the suggested fixes but none worked. Can I go back to the older version? I had no trouble with that and I do not like this new version at all. I tried a system restore twice and it did not fix the problem.

I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet.

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

Trouble with export and import

I am having trouble with export and import
here is what I did...
exp "'/ as sysdba'" PARFILE=parfile.txt
PAFILE
TABLES=user1.Table1
file=Table1_1006.dmp
LOG=Table1_1006.log
query="where to_char(processeddate,'YYYYMMDDHHMISS') between to_char(to_timestamp('1911-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS') and to_char(to_timestamp('2011-10-06 16:46:26','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS')"here is my log from export
set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
Current user changed to user1
. . exporting table Table1 16019049 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.Then I started importing
/database2/rdbm15> imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log
Import: Release 10.2.0.5.0 - Production on Thu Oct 6 19:57:01 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
. importing user1's objects into user1
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "Table1" ("APPROVALTRACEID" VARCHAR2(64), "REQUESTOR"
"EID" VARCHAR2(9), "EID" VARCHAR2(9), "FIRSTNAME" VARCHAR2(32), "LASTNAME" V"
"ARCHAR2(32), "MIDDLEINITIAL" VARCHAR2(8), "TIER" VARCHAR2(3), "JOBTITLE" VA"
"RCHAR2(64), "JOBCODE" VARCHAR2(10), "EMPLOYEETYPE" VARCHAR2(2), "CONTRACTOR"
"TYPE" VARCHAR2(2), "EMPLOYEESTATUS" VARCHAR2(2), "COSTCENTER" VARCHAR2(10),"
" "COSTCENTERDESCRIPTION" VARCHAR2(50), "CONTRACTENDINGDATE" VARCHAR2(8), "A"
"CCOUNTSTATUS" VARCHAR2(2), "LOGINID" VARCHAR2(70), "APPLICATIONGROUP" VARCH"
"AR2(50), "APPLICATIONNAME" VARCHAR2(50), "APPLICATIONID" VARCHAR2(12), "LEV"
"EL1" VARCHAR2(512), "LEVEL2" VARCHAR2(512), "LEVEL3" VARCHAR2(512), "LEVEL4"
"" VARCHAR2(512), "LEVEL5" VARCHAR2(512), "PROFILECODE" VARCHAR2(50), "PROCE"
"SSEDDATE" DATE, "APPROVERMANAGEREID" VARCHAR2(9), "APPROVERMANAGERDELEGATEE"
"ID" VARCHAR2(9), "APPROVERT4MANAGEREEID" VARCHAR2(9), "APPROVERT4MANAGERDEL"
"EGATEEID" VARCHAR2(9), "APPROVERAPPOWNEREID" VARCHAR2(9), "APPROVERAPPOWNER"
"DELEGATEEID" VARCHAR2(9), "PERFORMEREID" VARCHAR2(9), "NATIONALID" VARCHAR2"
"(30), "COUNTRYCODE" VARCHAR2(9), "PASSPORTID" VARCHAR2(20), "DATEOFBIRTH" V"
"ARCHAR2(15), "CITYOFBIRTH" VARCHAR2(15), "VENDORNAME" VARCHAR2(50), "VENDOR"
"MANAGERNAME" VARCHAR2(50), "VENDORMANAGERID" VARCHAR2(9), "VENDORADDRESS1" "
"VARCHAR2(100), "VENDORADDRESS2" VARCHAR2(100), "VENDORSTATEPROVINCE" VARCHA"
"R2(15), "VENDORCOUNTRYCODE" VARCHAR2(9), "VENDORZIPPOSTALCODE" VARCHAR2(9))"
" PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 4076863488 "
"NEXT 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) "
" LOGGING NOCOMPRESS"
Import terminated successfully with warnings.but I did not get rows to database2
[server1]database2
/database2/rdbm15> sqlplus / as sysdba
SQL*Plus: Release 10.2.0.5.0 - Production on Thu Oct 6 19:59:17 2011
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select count(*) from user1.Table1;
COUNT(*)
 0
SQL> exit
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - ProductionEdited by: user3636719 on Oct 6, 2011 5:23 PM

user3636719 wrote:
Thanks for the reply...
Old EXP IMP doesnt have capability to append the row, since you're using 10g use datapump instead. use option TABLE_EXISTS_ACTION=APPENDso my import should be like this
imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log TABLE_EXISTS_ACTION=APPEND
Did you look up the command line syntax and control options for imp?
You should make it a habit that whenever anyone - especially a stranger on the web - gives you a bit of code or references a command or init parm or any some such, the VERY FIRST thin you should ALWAYS do is look it up for yourself and see exactly where and how it is used and what it means. That is how you grow beyond having to be spoon fed every little thing and become more self-sufficient.
If you had, you would have seen that there is no TABLE_EXISTS_ACTION option for imp and seen that it is an option for impdp. And realized that exp and imp are NOT the same thing as expdp and impdp.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

TO ALL THOSE HAVING TROUBLE WITH ICHAT AND AIM ON MACBOOKS

I've had a lot of trouble with AIM and iChat on my new Macbook, but I believe I've figured out the answers to all the problems I and others have encountered.
Firstly, for those who's AIM continually crashes and displays the message "The application AIM unexpectedly shut down," my answer to your problem is too many sent messages. Watch the bar in the bottom left of your chat window, when it reaches red, your application will probably shut down.
Secondly, for those experiencing difficulties with iChat, it's most likely a problem with communitcation between your wireless router and your computer. Try these steps:
1. From the Apple menu, choose System Preferences.
2. From the View, choose Sharing.
3. Click the Firewall tab.
4. Click New.
5. From the Port Name pop-up menu, choose Other.
If you have a Macbook, you'll probably have a TCP Port Number Bar and a UDP Port Number Bar. Try these steps:
1. In the TCP Port Number(s) Bar, type: 5190, 5298
2. In the UDP Port Number(s) Bar, type: 1024-5219, 5221, 5223-65535
3. In the Description Bar, type: iChat AV
4. Click OK
5. Click Start above the window with your firewall settings, and make sure the box next to iChat AV is checked
6. Relaunch iChat
Good Luck! I hope this solves some of the problems that people have been encountering.

Rob
My Linksys is the WAG54G, which might be different from your WRT54G. Currently, UPnP is disabled and the Router ports are a bit of a mystery, because they're forwarded to an IP address that's outside of the current DHCP Address Range! Once I got it working, I was reluctant to change it even though it looked anomalous.
The Firewall is on, with the iChat ports open that I listed in the previous post.
My two regular buddies are my sons, who both use Trillian Pro on a Windows machine. Works pretty well despite occasional freezes or garbled sound.
Hope you get sorted soon.
Dave

I am having trouble with safari and most apps shutting down when I'm in the middle of stuff what do I need to do to resolve this?

I am havering trouble with safari and apps shutting down on me all the time what can I do to resolve this problem. Thanks :-)

Make sure you have enough free space on your iPad. With iOS 7 it is recommended that you have 15-20% of the storage space on the device free. For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.
Also try a reset. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-

Hi, everyone.
I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
Thanks,
Fabian Alberto Campo
MCT-MCSA 2012-MCITP365-MCTS
Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, Colombia

Hi Fabian,
Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
Actions pane to reset OWA virtual directory.
Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
Regards,
Winnie Liang
TechNet Community Support

Trouble with edit and develop after november 2013 release?

Hi,
I can not use edit and develop after release November 2013.
I am a user from Sweden and wonder if it only hit European data center?
The language has also changed from Swedish to English in the modules.
I can not access the following in Site Settings:
Admin users
Mobile support
Secure Domain redirect
Beta features
Does anyone have the same problem?
Regards André

Hi Florin
There is no errors in the browser. I tested Chrome, Safari, Firefox.
I sent a video to your colleague Silviu Ghimposanu (Adobe Business Catalyst Support)
He can give you more information. I submit tickets. Ticketsnr 60092, 60085
Maybe you can solve this together.
Regards André
20 nov 2013 kl. 12.17 skrev Florin Carlig:
Re: Trouble with edit and develop after november 2013 release?
created by Florin Carlig in Business Catalyst - View the full discussion
Hi Andre,
Can you please record a quick video with the errors you might have in your browser, in the browser's console?
Here's what I want (a video I did in Chrome): http://screencasteu.worldsecuresystems.com/Florin/2013-11-20_1306.swf
You can use Jing to record this kind of videos: http://www.techsmith.com/jing.html
Thanks and regards,
Florin
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5857868#5857868
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Trouble with edit and develop after november 2013 release?
To unsubscribe from this thread, please visit the message page at Re: Trouble with edit and develop after november 2013 release?. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Business Catalyst at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Recommendations for Semi-Pro or Pro HD Video camera to use with fcp and Mac

Recommendations for Semi-Pro or Pro HD Video camera to use with fcpX and Mac with auto settings and ability to override, need to add external mic or 2. Am one person crew so needs to be easy to use.

And check out the Panasonic AG-AC90. Very good specs for a prosumer unit. Everything in the semi-pro area will involve trade offs for sure. Key thing is to study up enough to know what your needs are vs what trade off are involved in the various models. The ag-ac90 trade off (one of them) is diffraction limited sharpness.

Trouble with D7460 and Mac OS 10.5.5

Similar Messages

Maybe you are looking for