Trouble with Deskjet 612C and Windows 7

I have an HP Deskjet 612C that has a parallel connection only. I have new WINDOWS 7 computer with only USB ports.The printer prints fine & I have several spare cartridges that cost a some bucks. I therefore bought a Parallel to USB cable hoping it would solve the problem. When I attached the cable, Windows responded by recognizing it (good) & announced that it was installed correctly (good). I saw the printer in devices & printers (good) & set it as my default printer. However, when I try to print something, all I get are two pages with a single line of garbage text.
Is there a simple solution to this

Welcome to our community
Unfortunately Captivate 4 wasn't created with Windows 7 in mind. Some folks here claim to be able to use it quite successfully. I fall into the camp where it refused to work.
Sounds like you may be in this category too. Bummer that.
The only way I can coax Captivate 4 to work on my own Windows 7 (Ultimate-64 Bit version) was to install the Windows XP Mode Virtual Machine and install it there. But that also means I cannot capture outside of the VM. In order to capture anything in Windows 7, I had to acquire and install Captivate 5.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

Trouble with itunes ipod and windows vista

I just got a new computer with windows vista home premium (32bit) and i am having trouble syncing my ipod with itunes.
when i connect the ipod it asks me if i want to scan and fix the drive, if i click continue without scanning it sometimes wont let me sync, and if it does it only gets about half my music on there before saying it is unable to write to it (unknown error 53)

I have a similar problem, with my new iPod Touch crashing an XP Professional setup. It's worth noting that the Apple article also talks about potential USB conflicts with other devices on the system that might have bad drivers. They say the solution, if that is the fault, is to make sure all your USB drivers are good. I'll try that, by a process of elimination, before re-installing iTunes (as I thought I had the latest version and I don't have Vista). I'll come back here later to report the outcome.
(serious if your iPod crashed your PC - can't even charge its battery ! )

Trouble with Captivate 4 and Windows 7

My office just migrated to Windows 7 (64 bit) and when I try to run Captivate 4 I get the attached error message and Captivate does not capture. I logged in as administrator and I still cannot run the program successfully. Any suggestions?

Welcome to our community
Unfortunately Captivate 4 wasn't created with Windows 7 in mind. Some folks here claim to be able to use it quite successfully. I fall into the camp where it refused to work.
Sounds like you may be in this category too. Bummer that.
The only way I can coax Captivate 4 to work on my own Windows 7 (Ultimate-64 Bit version) was to install the Windows XP Mode Virtual Machine and install it there. But that also means I cannot capture outside of the VM. In order to capture anything in Windows 7, I had to acquire and install Captivate 5.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Trouble with Airport Express and Windows 7

I have my airport express connected to my computer via ethernet cable and I have the airport connected to my network.
But in the network connection settings it says that I'm connected but there's no internet access. The map in Network and sharing center looks like this:
(This computer) =============== Unidentified Network =======X========Internet
Can you please help me find a solution?
Thanks!
-Sam

whitefire765 wrote:
I have my airport express connected to my computer via ethernet cable and I have the airport connected to my network.
The last bit.. how do you have the Express connected to the network??
What IP does the Express have and what IP does it hand to the computer??
I presume you can access the express from airport utility in windows.. if not please do load it.

Trouble with Lightroom 4 and windows 8

after recently updating my operating system to windows 8 i started getting this message every time i tried to open my Lightroom 4 even after restarting my computer. I also uninstalled and then reinstalled Lightroom 4 to see if that was the problem as well but still no luck. Can anyone help?

There is a LOCK file holding it up. Close LR and search for a file that has the same name as your catalog but has a .LOCK extension. Delete the Lock file. Open Lightroom. It should work.

I'm having trouble with iTunes synching and accessing the iTunes store.

I'm having trouble with iTunes synching and accessing the iTunes store. When synching, the process tops at the back up stage, freezes and I can't close the iTunes window, need to ctrl alt del. When trying to access the store, the progress bar stops halfway. I've googled heaps and tried most of the standard answers - unistall, reinstall, etc, now looking for some help please.
This has only started a few weeks back, after working smoothly for the 2 years of owning the iPhone 3gs.
Any suggestions will be appreciated, it's getting realy frustrating.
Cheers for now,
Marty

http://support.apple.com/kb/HT1923?viewlocale=en_US
this worked perfectly for me, with no loss of library! BUT was warned about uninstalling things in the order listed...FYI.

Trouble with LaCie disk and time machine

HI everyone,
I've been having trouble with using time machine to back-up to my 1 TB LaCie drive (purchased 5/12, unfornuately I was dumb and didn't register the drive and no longer have the box with the serial number and there is no serial number on my drive. The only problem I had up until the end of August was that every so often the LaCie drive (using my FW 800 port) would unmount after waking up from sleep.
The end of August the drive unmounted for no reason while I was on the computer doing a task. Could not get the LaCie drive remounted (rebooting, etc. etc.) To make a long story short, ended up calling apple care who took me through resetting my SMC and PRAM to no avail. Was booted to higher level of support who walked me through trying to repair my drive using the disk utiltiy. When that didn't work, she walked me through erasing and reformatting the LaCie drive and starting a new time machine back-up. Every thing ok until about ten days ago.
Last week, when I woke my iMac up from sleep, I got an error saying that the disk was not ejected properly and I could not mount the drive. Restarting did nothing, the disk did not mount. Shutting down and rebooting seemed to solve the problem and the disk was mounted. Every so often I've had the problem with the disk unmounting after waking up from sleep before. So, I changed my energy sleep preferences. At the end of the day when I am done, I'd unmount the LaCie drive before putting the Mac to sleep using the apple menu.
Today I came in to start my day, plugged the drive in and it would not mount. Tried rebooting nothing. Went into the disk utility, at first the LaCie drive passed the disk verify (6:26:25 and 6:26:38). Then I went into repair disk on the indented drive at 6:27:13, I wasn't sure what it is was doing, thinking that it had hung, I stopped the repair at 6:27:24. Exited disk utility, and the LaCie drive mounted. But I was getting a read only error when I tried to back-up using time machine. So, I went back into disk utility at 6:27:35, when I verified the disk (indented disk), I got an error saying the disk need to be repaired. After several minutes the disk could not be repaired. So, I erased and reformatted the drive. Ran a time machine back-up and it seemed to back-up everything on my hard drive. Just ran another verify disk and it passed.
Is the drive failing? Have some other back-ups of my documents, my address book, iCal and am going to make a backup of some of my pref files and important e-mail files and am going to do some more back-ups after I am done.
Have reached out to the women at apple care whom I talked to last August, but don't expect to hear back from her for at least 24 hours.
Here is my disk utility log
2013-11-07 06:26:25 -0500: Verifying partition map for “LaCie”
2013-11-07 06:26:25 -0500: Starting verification tool:
2013-11-07 06:26:25 -0500: Checking prerequisites
2013-11-07 06:26:25 -0500: Checking the partition list
2013-11-07 06:26:25 -0500: Checking for an EFI system partition
2013-11-07 06:26:25 -0500: Checking the EFI system partition’s size
2013-11-07 06:26:25 -0500: Checking the EFI system partition’s file system
2013-11-07 06:26:25 -0500: Checking all HFS data partition loader spaces
2013-11-07 06:26:25 -0500: Checking Core Storage Physical Volume partitions
2013-11-07 06:26:25 -0500: The partition map appears to be OK
2013-11-07 06:26:25 -0500:
2013-11-07 06:26:25 -0500:
2013-11-07 06:26:38 -0500: Verifying partition map for “LaCie”
2013-11-07 06:26:38 -0500: Starting verification tool:
2013-11-07 06:26:38 -0500: Checking prerequisites
2013-11-07 06:26:38 -0500: Checking the partition list
2013-11-07 06:26:38 -0500: Checking for an EFI system partition
2013-11-07 06:26:38 -0500: Checking the EFI system partition’s size
2013-11-07 06:26:38 -0500: Checking the EFI system partition’s file system
2013-11-07 06:26:38 -0500: Checking all HFS data partition loader spaces
2013-11-07 06:26:38 -0500: Checking Core Storage Physical Volume partitions
2013-11-07 06:26:38 -0500: The partition map appears to be OK
2013-11-07 06:26:38 -0500:
2013-11-07 06:26:38 -0500:
2013-11-07 06:27:13 -0500: Disk Utility started.
2013-11-07 06:27:21 -0500: Verifying and repairing partition map for “LaCie”
2013-11-07 06:27:21 -0500: Starting repair tool:
2013-11-07 06:27:21 -0500: Checking prerequisites
2013-11-07 06:27:21 -0500: Checking the partition list
2013-11-07 06:27:21 -0500: Checking for an EFI system partition
2013-11-07 06:27:21 -0500: Checking the EFI system partition’s size
2013-11-07 06:27:21 -0500: Checking the EFI system partition’s file system
2013-11-07 06:27:23 -0500: Checking all HFS data partition loader spaces
2013-11-07 06:27:24 -0500: Reviewing boot support loaders
2013-11-07 06:27:24 -0500: Checking Core Storage Physical Volume partitions
2013-11-07 06:27:24 -0500: Updating Windows boot.ini files as required
2013-11-07 06:27:24 -0500: The partition map appears to be OK
2013-11-07 06:27:24 -0500:
2013-11-07 06:27:24 -0500:
2013-11-07 06:27:35 -0500: Verifying volume “LaCie”
2013-11-07 06:27:35 -0500: Starting verification tool:
2013-11-07 06:27:35 -0500: Checking file system2013-11-07 06:27:35 -0500: Error: This disk needs to be repaired. Click Repair Disk.2013-11-07 06:27:35 -0500:
2013-11-07 06:27:35 -0500: Disk Utility stopped verifying “LaCie”: This disk needs to be repaired. Click Repair Disk.
2013-11-07 06:28:05 -0500:
2013-11-07 06:28:13 -0500: Verify and Repair volume “LaCie”
2013-11-07 06:28:13 -0500: Starting repair tool:
2013-11-07 06:28:13 -0500: Checking file system2013-11-07 06:28:13 -0500: Volume repair complete.2013-11-07 06:28:13 -0500: Updating boot support partitions for the volume as required.2013-11-07 06:35:05 -0500: Stopped by user
2013-11-07 06:44:56 -0500: Disk Utility started.
2013-11-07 06:45:20 -0500: Verifying volume “LaCie”
2013-11-07 06:45:20 -0500: Starting verification tool:
2013-11-07 06:45:20 -0500: Checking file system2013-11-07 06:45:20 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:45:20 -0500: Checking extents overflow file.
2013-11-07 06:45:20 -0500: Checking catalog file.
2013-11-07 06:45:59 -0500: Missing thread record (id = 5057741)
2013-11-07 06:46:06 -0500: Checking multi-linked files.
2013-11-07 06:46:19 -0500: Checking catalog hierarchy.
2013-11-07 06:46:38 -0500: Invalid directory item count
2013-11-07 06:46:38 -0500: (It should be 0 instead of 4)
2013-11-07 06:46:38 -0500: Invalid volume directory count
2013-11-07 06:46:38 -0500: (It should be 166840 instead of 166841)
2013-11-07 06:46:38 -0500: Checking extended attributes file.
2013-11-07 06:47:05 -0500: Checking multi-linked directories.
2013-11-07 06:48:10 -0500: Checking volume bitmap.
2013-11-07 06:48:12 -0500: Checking volume information.
2013-11-07 06:48:12 -0500: The volume LaCie was found corrupt and needs to be repaired.
2013-11-07 06:48:12 -0500: Error: This disk needs to be repaired. Click Repair Disk.2013-11-07 06:48:12 -0500:
2013-11-07 06:48:12 -0500: Disk Utility stopped verifying “LaCie”: This disk needs to be repaired. Click Repair Disk.
2013-11-07 06:48:12 -0500:
2013-11-07 06:50:02 -0500: Verify and Repair volume “LaCie”
2013-11-07 06:50:02 -0500: Starting repair tool:
2013-11-07 06:50:02 -0500: Checking file system2013-11-07 06:50:02 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:50:02 -0500: Checking extents overflow file.
2013-11-07 06:50:02 -0500: Checking catalog file.
2013-11-07 06:50:41 -0500: Missing thread record (id = 5057741)
2013-11-07 06:50:48 -0500: Checking multi-linked files.
2013-11-07 06:51:02 -0500: Checking catalog hierarchy.
2013-11-07 06:51:20 -0500: Invalid directory item count
2013-11-07 06:51:20 -0500: (It should be 0 instead of 4)
2013-11-07 06:51:20 -0500: Invalid volume directory count
2013-11-07 06:51:20 -0500: (It should be 166840 instead of 166841)
2013-11-07 06:51:20 -0500: Checking extended attributes file.
2013-11-07 06:51:47 -0500: Checking multi-linked directories.
2013-11-07 06:52:55 -0500: Checking volume bitmap.
2013-11-07 06:52:56 -0500: Checking volume information.
2013-11-07 06:52:56 -0500: Repairing volume.
2013-11-07 06:52:56 -0500: Missing directory record (id = 5057741)
2013-11-07 06:52:56 -0500: Look for missing items in lost+found directory.
2013-11-07 06:53:10 -0500: Rechecking volume.
2013-11-07 06:53:10 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:53:10 -0500: Checking extents overflow file.
2013-11-07 06:53:10 -0500: Checking catalog file.
2013-11-07 06:53:16 -0500: Incorrect number of thread records
2013-11-07 06:53:22 -0500: Checking multi-linked files.
2013-11-07 06:53:35 -0500: Checking catalog hierarchy.
2013-11-07 06:53:53 -0500: Invalid directory item count
2013-11-07 06:53:54 -0500: (It should be 5 instead of 6)
2013-11-07 06:53:54 -0500: Invalid volume directory count
2013-11-07 06:53:54 -0500: (It should be 166844 instead of 166842)
2013-11-07 06:53:54 -0500: Invalid volume file count
2013-11-07 06:53:54 -0500: (It should be 1056326 instead of 1056321)
2013-11-07 06:53:54 -0500: Checking extended attributes file.
2013-11-07 06:54:20 -0500: Checking multi-linked directories.
2013-11-07 06:55:25 -0500: Checking volume bitmap.
2013-11-07 06:55:26 -0500: Checking volume information.
2013-11-07 06:55:26 -0500: Repairing volume.
2013-11-07 06:58:06 -0500: Rechecking volume.
2013-11-07 06:58:06 -0500: Checking Journaled HFS Plus volume.
2013-11-07 06:58:06 -0500: Checking extents overflow file.
2013-11-07 06:58:07 -0500: Checking catalog file.
2013-11-07 06:58:12 -0500: Incorrect number of thread records
2013-11-07 06:58:18 -0500: Checking multi-linked files.
2013-11-07 06:58:31 -0500: Checking catalog hierarchy.
2013-11-07 06:58:50 -0500: Invalid volume directory count
2013-11-07 06:58:50 -0500: (It should be 166844 instead of 166842)
2013-11-07 06:58:50 -0500: Invalid volume file count
2013-11-07 06:58:50 -0500: (It should be 1056326 instead of 1056321)
2013-11-07 06:58:50 -0500: Checking extended attributes file.
2013-11-07 06:59:17 -0500: Checking multi-linked directories.
2013-11-07 07:00:22 -0500: Checking volume bitmap.
2013-11-07 07:00:24 -0500: Checking volume information.
2013-11-07 07:00:24 -0500: Repairing volume.
2013-11-07 07:03:03 -0500: Rechecking volume.
2013-11-07 07:03:03 -0500: Checking Journaled HFS Plus volume.
2013-11-07 07:03:03 -0500: Checking extents overflow file.
2013-11-07 07:03:04 -0500: Checking catalog file.
2013-11-07 07:03:09 -0500: Incorrect number of thread records
2013-11-07 07:03:15 -0500: Checking multi-linked files.
2013-11-07 07:03:29 -0500: Checking catalog hierarchy.
2013-11-07 07:03:47 -0500: Invalid volume directory count
2013-11-07 07:03:47 -0500: (It should be 166844 instead of 166842)
2013-11-07 07:03:47 -0500: Invalid volume file count
2013-11-07 07:03:47 -0500: (It should be 1056326 instead of 1056321)
2013-11-07 07:03:47 -0500: Checking extended attributes file.
2013-11-07 07:04:14 -0500: Checking multi-linked directories.
2013-11-07 07:05:19 -0500: Checking volume bitmap.
2013-11-07 07:05:20 -0500: Checking volume information.
2013-11-07 07:05:20 -0500: The volume LaCie could not be repaired after 3 attempts.
2013-11-07 07:05:21 -0500: Volume repair complete.2013-11-07 07:05:21 -0500: Updating boot support partitions for the volume as required.2013-11-07 07:05:21 -0500: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.2013-11-07 07:05:21 -0500:
2013-11-07 07:05:21 -0500: Disk Utility stopped repairing “LaCie”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
2013-11-07 07:05:21 -0500:
2013-11-07 07:09:45 -0500: Disk Utility started.
2013-11-07 07:11:45 -0500: Preparing to erase : “LaCie”
2013-11-07 07:11:45 -0500:     Partition Scheme: GUID Partition Table
2013-11-07 07:11:45 -0500:     1 volume will be erased
2013-11-07 07:11:45 -0500:         Name        : “LaCie”
2013-11-07 07:11:45 -0500:         Size        : 999.86 GB
2013-11-07 07:11:45 -0500:         File system    : Mac OS Extended (Journaled)
2013-11-07 07:11:45 -0500: Unmounting disk
2013-11-07 07:11:45 -0500: Erasing
2013-11-07 07:11:54 -0500: Initialized /dev/rdisk1s2 as a 931 GB HFS Plus volume with a 81920k journal
2013-11-07 07:11:54 -0500: Mounting disk
2013-11-07 07:11:54 -0500: Erase complete.
2013-11-07 07:11:54 -0500:
2013-11-07 10:38:00 -0500: Disk Utility started.
2013-11-07 10:38:12 -0500: Verifying volume “LaCie”
2013-11-07 10:38:12 -0500: Starting verification tool:
2013-11-07 10:38:14 -0500: Checking file system2013-11-07 10:38:14 -0500: Checking Journaled HFS Plus volume.
2013-11-07 10:38:14 -0500: Checking extents overflow file.
2013-11-07 10:38:14 -0500: Checking catalog file.
2013-11-07 10:38:29 -0500: Checking multi-linked files.
2013-11-07 10:38:29 -0500: Checking catalog hierarchy.
2013-11-07 10:38:41 -0500: Checking extended attributes file.
2013-11-07 10:39:04 -0500: Checking multi-linked directories.
2013-11-07 10:39:31 -0500: Checking volume bitmap.
2013-11-07 10:39:32 -0500: Checking volume information.
2013-11-07 10:39:32 -0500: The volume LaCie appears to be OK.
2013-11-07 10:39:32 -0500: Repair tool completed:
2013-11-07 10:39:32 -0500:
2013-11-07 10:39:32 -0500:

I just got a call back from the upper level support person at apple care who had been advising me on my trouble with time machine and my LaCie 1 TB FWD. I had sent her much of the same verbiage as I posted here. As some of you have probably figured out, the verdict is that the drive is probably failing. She says this because I have had to do two erase and reformats. She thought that the intermitant problem that I have had with the drive unmounting when my iMac wakes from sleep could be related to the drive failing.
In the meantime I have a secondary back-up (not using time machine) and the LaCie 1 TB FWD is working for the moment.
Thanks to all who read all my verbiage.
And in the meantime, I've learned something. I marked this question as solved. But I'm open to other things to try.
Message was edited by: njtreehugger minor edits and update

I have an issue with the tabs and windows disappearing....?

I have a constant problem with Firefox now. I notice that with Firefox 4 and 5 there has been a reoccurring problem with the tabs and windows closing on their own. If I have more than one window open, one of them will suddenly disappear and I wont see the tab at the bottom anymore until I click out of the one I am currently on. It is very annoying and only when I get out of Firefox completely will it sometimes reappear. Even more frightening is the fact that when I move the mouse downward to the bottom of the page the page shuts out as if I clicked out of it.
I am wondering if this is a security issue meaning some type of malware or virus that is manipulating my browser or is this a common issue that has some unknown cause? I would like to know what the cause is and how it can be fixed because it annoys me all the time. Please help!!

No Issue with the voltage in general. iPad is being charged via USB.
1. If you connect it directly to the computer - no problem.
2. If you want to charge it directly from the power socket you will need this:
http://store.apple.com/uk/product/MB706B/B/apple-usb-power-adapter
TZ

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

External hard drive use with both Mac and Windows

I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
(9844)

Problems with Acrobat 8 and Windows 7 64 bit

Hi all
I need help with Acrobat 8 and Windows 7.
During the installation I'm asked to locate the file AdobePDF.dll on the disk. Selected the file in C:\Program Files (x86)\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF\AMD64.
The installation finishes without any other problem.
The problem arises when I want to create a pdf from a Word document. I'm using Office 2007. When I select he option to create a pdf from a file, I get message in the attached image.
If I try to used the Adobe PDF printer from within Word, nothing happes. The small printer icon apprears in the Windows task bar, but that is all. If I double click on the icon, I can see the print job, but that's all. There is no dialog box that asks me to save the file.
Assistance will be apppreciated.

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this?

Lbo51380 wrote:
cant find an itunes app for my laptop. is there something i can get that will help with this?
Go here -> http://www.apple.com/itunes/download/

Trouble With Opening InDesign and now Photoshop and Illustrator

First off I apologize if this isn't in the correct section. I couldn't find a section specific to my problem since it involves multiple aspects of Adobe products. I was having trouble with InDesign, it kept crashing. So I followed all of the advice I could find on the forums about deleting the preferences and cache information in the Library folder, and that didn't seem to make a difference. So then I thought maybe it needed an update, so I logged into Adobe Application Manager and sure enough, it did. So I clicked on "download" and it stalled there too. Then the manager became unresponsive. I couldn't cancel the update or log out or anything. So then I saw in the forum someone suggested the Adobe Creative Cloud Cleaner Tool if your manager becomes unresponsive. I ran that and then shut my computer off. When I turned it back on, InDesign started working BUT my Photoshop is completely gone from my system (I never messed with it in the first place since I wasn't having any trouble with it.) And the when I tried to click on Illustrator it said "Do you want to begin your trial?" Huh?
I have had a subscription since 2012, why on earth would it suddenly think that I no longer should have access to these programs? If I log on to my Adobe account it shows my subscription and that it's up to date (last payment was April 5, 2015). The versions I was using were the CS versions that I had downloaded directly from Adobe and when I used to have any trouble or when I got a different computer I could just log into my account and then redownload them. They are no longer showing under my products, so I can't figure out what on earth is going on. The website has changed since the last time I downloaded them, so that partly could be me, but I thought they would at least be showing up under products. I contacted Adobe support and the first person I talked to on chat said "this is clearly a technical issue I am transferring you to someone better suited for this," but that's all he said. And I haven't heard from anyone since so I thought I'd make a topic and see if anyone else out there has had a similar problem.

The versions I am using are the CS6 versions.*

Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T

Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T
I am having trouble making outgoing call or answering incoming call.
When I try to call out from my IP 7961 phone, it fails with the message "unknown number".
For incoming call, it rings but when I pick up the call nothing happens,
Put the receiver back on hook, the phone carries on ringing. I am in UK
and just trying to set up test system with one analogue line. Any help will
be most appreciated. My config of the 2811 router is posted below. All calls ineternally works fine.
Thank you for your help.
hostname Test-CME
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1 10.10.10.10
ip dhcp excluded-address 10.139.139.1 10.139.139.10
ip dhcp pool host
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
option 150 ip 10.10.10.1
ip dhcp pool data
network 10.139.139.0 255.255.255.0
default-router 10.139.139.1
dns-server 10.139.139.5
voice-card 0
no dspfarm
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
sip
header-passing
registrar server expires max 3600 min 3600
interface FastEthernet0/1
no ip address
no ip mroute-cache
duplex auto
speed auto
no shut
interface FastEthernet0/1.2
description ** Data VLAN **
encapsulation dot1Q 2
ip address 10.139.139.1 255.255.255.0
interface FastEthernet0/1.3
description ** Voice VLAN **
encapsulation dot1Q 3
ip address 10.10.10.1 255.255.255.0
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
tftp-server flash:S00104000100.sbn
tftp-server flash:TERM41.7-0-3-0S.loads
tftp-server flash:term61.default.loads
tftp-server flash:term41.default.loads
tftp-server flash:CVM41.2-0-2-26.sbn
tftp-server flash:cnu41.2-7-6-26.sbn
tftp-server flash:Jar41.2-9-2-26.sbn
tftp-server flash:term70.default.loads
tftp-server flash:term71.default.loads
tftp-server flash:cnu70.2-7-6-26.sbn
tftp-server flash:Jar70.2-9-2-26.sbn
tftp-server flash:TERM70.7-0-3-0S.loads
tftp-server flash:CVM70.2-0-2-26.sbn
control-plane
voice-port 0/3/0
connection plar opx 202
caller-id enable
dial-peer voice 1 pots
incoming called-number .
destination-pattern 9T
port 0/3/0
telephony-service
load 7914 S00104000100
load 7941 TERM41.7-0-3-0S
load 7961 TERM41.7-0-3-0S
load 7970 TERM70.7-0-3-0S
max-ephones 20
max-dn 40
ip source-address 10.10.10.1 port 2000
calling-number initiator
service phone videoCapability 1
system message MKC CME
url services http://10.10.10.1/voiceview/common/login.do
url authentication
http://10.10.10.1/voiceview/authentication/authenticate.do
time-zone 21
date-format dd-mm-yy
voicemail 600
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
web admin system name admin secret 0 test
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
secondary-dialtone 9
create cnf-files
ephone-dn 1 dual-line
number 201
label 201
description Sarah
name Sarah
ephone-dn 2 dual-line
number 202
label 202
description Vitthal
name User2 Vitthal
ephone-dn 3 dual-line
number 203 secondary
label 203
description Neil
name User3 Neil
ephone 1
video
username "user1" password 201
mac-address 0018.18EE.947F
type 7961 addon 1 7914
button 1:1
ephone 2
video
username "user2" password 202
mac-address 0018.18BB.B973
type 7941
button 1:2
ephone 3
video
username "user3" password 203
mac-address 0018.1885.6BA2
type 7970
button 1:3

Hi
Please find enclosed debug attachment for voice ccapi and ephone. First, I called from outside. Extension 202 rings but when I answered on extension 202 nothing happens. Replace the rceiever and the pone starts ringing again.Second step. I tried to call out by dialing 9 and then number but after a while phone displays unknown number.
Thank you for your help.
Vitthal

Using Icloud with Outlook 2007 and windows 7, I cannot get my calendar to list the scheduled appointments as it used to do before I cloud. The to do bar just shows no upcoming appointments when my calendar is filled with them. How do I fix this

Since using ICloud with Office 2007 and Windows 7, the to-do-list will not show any appointments. If has the notation that no appointments are available? My calendar is full of appointments. How do I correct this?

I don't have a password on my phone. After attaching the phone to the Windows 7 computer, my DCIM folder is always empty. Here's the solution: While the phone is plugged in to the computer, pick it up and select the Photos application. A dialog box appears and asks if you trust this computer. Obviously, select the "Trust" option. Then the photos will download. If you have a password on your phone, I'm guessing you have to enter it before you open the photo application.

Trouble with Deskjet 612C and Windows 7

Similar Messages

Maybe you are looking for