Trouble with desktop application

I am trying to use the desktop application with a pearl I bought off of eBay. Every time I try to connect the phone the application asks for a key stored password. So I guess my question is where do I find this password and is there a default password like 123456 or 000000?

There is no default password.
Your seller had a password set on the device, and you must use that password to unlock the device. If you enter the incorrect password 10 times, it will wipe the devcie of all pesonal information.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • I'm having trouble with my applications freezing.  Then when they are "unreponsive" I quit and another becomes "unresponsive" until I'm down to Finder and it won't relaunch.  HELP!!

    I'm having trouble with my applications freezing.  Then I force-quit because they are "unresponsive,"  another applidation becomes "unresponsive" until I'm down to Finder and it won't relaunch.  HELP!!

    Mine is doing the same thing!  I have more than enough hard drive.  It's only 3 months old.

  • My Macbook with 10.6.8 is having trouble with certain applications- Word will not open, and text edit or pdf will not print.

    My Macbook (13 inch 2008) running OS 10.6.8 is having trouble with some applications.  Word will not even open.  I cannot print from text edit or Preview or Adobe.  Excel sometimes opens but very slow.  What could be wrong?  I have repaired permissions, used an antivirus program, deleted some old MS fonts, and still no change.  I have 1 G RAM and there seems to be plenty available and I have 50 G of hard drive space empty.

    Well, first 1gb of Ram is not plenty. It's the absolute bare minimum just to run OS X 10.6.8. The MS Office applications are ram hogs also. I would recommend three things.
    1. Get more ram.
    2. Reinstall and update your MS Office applications.
    3. Reinstall Snow Leopard.
    If you're not familiar with Activity Monitor you might have a look at this link and you'll be able to judge your ram situation a little better.
    http://support.apple.com/kb/PH5149

  • I cannot download Photoshop - had no trouble with the applications though - why is that?

    I cannot download Photoshop, though I had no trouble with other application, why is that?

    I'm using the "download trial" button from the Adobe Cloud page,
    https://creative.adobe.com/products/photoshop
    matilde
    www.matilde-alessandra.com

  • Big trouble with "The application 'Firefox' can't be opened

    Hello
    I have a big problem. I cannot use firefox, either quit it or use this application. If I want use firefox than I get the Information "The Application firefox can't be opened -600". And also I cannot close my macbook Pro (alas it is a Retina) or trying reboot. It still stands and nothing changing on the desktop from the macbook. I have red some some problems with the probably solutions how can fix it, but I'm afraid about, that I would make a big mistake and destroy the macintosh Marverics System that I have.
    Please. I need help !
    Thank you!
    Canno92

    This Step failed a lots of time. I tried everything in my mind. I tried to do this step you suggest me now, and nothing (some tries before) happened. What can I do to not have the message "the application firefox cannot be opened - 600" ? Its really **** that that happened now..
    I tried to reboot - nothing changed
    I tried quit the application - nothing changed
    I tried to hold he "shut down" button - nothing has changed or has shut down
    I tried go to system preferences/application/ and tried to trash the application - nothing changed, because the application is still working/or in use. And this s*** is really confusing me. Therefore I can not use firefox, not trash the application because it is in use, or either close the application to shut down or restart/reboot my macbook Pro.
    Any other suggestions? If possible, than it would be very kindly.

  • Hardware Trouble with Preview Application? (Kern_protection_failure)

    i was having some software problem some months ago where many applications (photoshop, illustrator, sketchup, safari, mail, preview) were crashing constantly... i took my macbook to the tech guy and he said that i should do "erase and install"... I cleaned the HD, did the e&i process once with tiger, twice with leopard and it seemed to fix most problems with all the apps except Preview... on the third attempt i simply deleted Preview and installed it directly from the leopard disk it worked the first time but the second time it crashed once again... whenever i try to edit a pic and save it, it will crash and report stuff like this on the dialog:
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
    Crashed Thread: 0
    Thread 0 Crashed:
    0 com.apple.QuartzCore 0x94bc3719 fefragment_renderquad + 161
    Thread 0 crashed with X86 Thread State (32-bit):
    eax: 0x00000000 ebx: 0x94bc368c ecx: 0xbfff8348 edx: 0x00000004
    edi: 0xbfff839c esi: 0xbfff83cc ebp: 0xbfff7fb8 esp: 0xbfff70f0
    ss: 0x0000001f efl: 0x00010202 eip: 0x94bc3719 cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    cr2: 0x00000000
    and some other long dialog that i can't understand... i've tried reaching out for help on the boards and apple technicians but they don't seem to know what's wrong... since the erase and install isn't working...
    please help ...

    Hi Llore_pr!
    Sorry to hear you're having issues. Throughout your dealings with other people on this issue has anyone had you reset the PRAM?
    [Resetting your Mac's PRAM and NVRAM|http://docs.info.apple.com/article.html?artnum=2238]
    This error message looks oddly familiar to something I had seen recently on a buddy's computer with VLC. We "zapped" the PRAM and the problem went away and has yet to rear its ugly head.

  • Having some trouble with Apple Application Support...

    So, I recently purchased a new 3G iPod Touch. I already had iTunes installed, so I did not think I would have a problem. However, it prompted me to update to iTunes 9. I didn't give it much thought when it froze the first few times and simply thought it was a download error, so I just stopped the installation process and retried. After letting it run, the process gave me an error message prompted from the "Publishing Product Information" status. I tried uninstalling all the Apple-related software on my computer in hopes that it would work to no avail. I received the same message. Then I tried going through this list of troubleshooting procedures [http://support.apple.com/kb/HT1926?viewlocale=en_US] which also did not work. I did some research and found that some individuals had luck with extracting each of the separate install processes from iTunesSetup and proceeding to install each one separately. One person claimed that by starting with AppleApplicationSupport, he somehow overcame the issue. However, once the installation process reached a certain point [also the Publishing Product Information status], the process froze and a short while later fed me an error message (the error reads: 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="x86"'. Please refer to help and Support for more information. HRESULT: 0x800736FD). I'm at a loss as to what to do now.
    Message was edited by: BigPoeticCanine

    Some experimental advice in this context. (I generally try this for different install errors than the publickeytoken jobbies.)
    We might be able to get things to go through better if we do a "standalone" Apple Application Support install, and then do the iTunes install.
    First, uninstall iTunes again.
    Now go "Start > All programs > Apple Software Update". *Do not install anything yet.*
    In ASU, go "Tools > Open Downloaded Updates folder". Delete any files currently in there.
    Go back into ASU. Select the iTunes offering. Now go "Tools > download only".
    After the downloads complete, go back into the Downloaded updates folder. Doubleclick on the AppleApplicationSupport.msi file to do a "standalone" AAS install.
    Does that one go through okay this time?
    If so, doubleclick on the iTunes.msi this time. If that goes through okay, does iTunes launch without the error message now?

  • Trouble with Desktop Software 7.0

    I recently upgraded my Desktop Software to 7.0, and when I connected by Tour to sync it has been at the "Preparing sync preview" screen for about 40 minutes with the bar completely green. Is this a glitch with the new 7.0 software?
    Thanks!
    Steve

    Hi SRydin,
    Please avoid posting multiple post of a same message. This is make the forum clean and useful for others.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Strange problem with desktop applications randomly freezing

    Hi guys,
    Over the past two weeks I've noticed that a few, very specific applications, have been crashing horrifically for me. Specifically, they're Firefox, Chromium and Eclipse and anything else powered by Java as well. I found the Eclipse issue people talked about on here regarding the upgrade to Xulrunner, but they only partially fix my problem.
    What happens is the applications will randomly freeze, completely. The gui locks up and the window becomes a grey box, and the only way I can get rid of the window is with kill -9.
    I've tried figuring out what's wrong, but honestly I have no idea. I'm running 32bit Arch, with a Nvidia 8800GTX card on the official binary drivers, using Openbox. Everything as of the time of this post is up to date throug Pacman.
    Also, with the amount of problems I'm seeing on Gnome3 in here, what about creating a temporary sub-forum to hold them all? It would certainly tidy this one up a lot.

    My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
    I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
    I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
    Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

  • Trouble with Adobe Application Manager

    I'm getting the above error whenever I try to update any adobe applications.  It claims I have more than one iteration of it open, but my dock claims I only am trying o open the one instance.  Help.  (I'm running cc on a windows 7 laptop.)

    press ctrl-alt-del > click task manager > processes and check for aam.

  • Trouble with Desktop Software - Can't Unlock

    Hi.  The desktop software won't recognize my password to unlock the device to connect.  I'm prompted on both the phone and the computer for the password.  I can unlock my curve 9300, but the computer will not recognize my password.  Help!  I am trying to setup my connection for the first time. 
    Thanks in advance!

    Hi and welcome to the forums jesse_p!
    A couple of places for you to visit: Blackberry 101     Tips & Tricks
    See if this kb article doesn't help:  KB 11105
    Happy to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • LMS4.2.4: trouble with UT Application

    Hi,
    User Tracking isnt useable at all:
    1. if you jump from (nnn End Hosts)@Collection Summery you get a Notifiaction Window: "Error in loading properties from the server" in place of the expecet UT-list.
    2. if you call UT from reporting, you will wait very long time to get the mask and after calling a quick report you get a Notifiaction Window: "Application Error: ."
    3. there is nothing seen in all log files during calling time period
    Steffen
    P.S.: pdshow showes ANIServer is stutdown, pdexec shut the ANIServer down 1 minute later, ani.log showes: Could not create socket (43242) ... BindExepion: Adress already in use: JVM_Bind

    Hi ,
    Thanks sneuser.
    i was had the same issue and the restart solve this problem.
    thanks you 

  • Isn't Adobe Color available for use with desktop applications??  It looks like Adobe Kuler has NOT been replaced with Adobe Color - It has been Deleted!

    It looks like the new Adobe Color is for iPad / iPhone only.  Why isn't it available for desktop use like Kuler? 
    Kuler server seems to have been turned off.  Why?  Kuler and colour themes were very useful. 

    Adobe Color CC

  • Muse is acting very slow/trouble with Desktop/Tablet/iPhone

    Hey everyone,
    I saw a post on this in 2012, but I didn't really see any answer to it. My Muse site is acting really slow when I opening different pages. Once the page is open, it works relatively fast. But trying to open different pages and especially when flipping through the Desktop/Tablet/iPhone sections of my site, it takes upwards to 10 seconds to complete one command. I absolutely love Muse, but this is annoying, albeit only slightly. It seems to have become worse now that there are three different sites, and a decent amount of pages.
    I was really hoping that there might be an archive button that would let me hide pages from site, but still keep them active. Many of the pages, after a week or two, do not need to be modified, but it is important that they remain active on our website. Is there a work around were I could accomplish this but keep my muse program running quickly?
    I also have one more issue. When creating a page on my Desktop, I usually want to create a similar page for my tablet and iPhones site as well. When I first created the Tablet/iPhone sites, the outline of the desktop was transfered to both of them. This saved me a lot of time recreating the pages, and making sure the names were the same. But now, when I add a page, I have to create the page on the tablet and the iPhone. Its not a huge deal, but it takes 10 seconds to switch to the tablet page, and then 10 seconds to create a new pages, and then 10 seconds to rename... it simply adds up. Am I missing something to do this a little more efficenetly?

    It sounds like your image file sizes are large? Do you resize your images and optimize them before you add them in Muse?
    Maybe provide a link so we can test.

  • Trouble with Pro Application Support 4.0.1

    I'm running FC Studio 2 on a G5, OS X 10.4.10.
    After installing this update the following problems:
    Aperture won't launch
    Qmaster won't launch
    Batch Monitor won't launch
    ...that's as far as I went...
    Eventually replacing ./System/Library/PrivateFrameworks/ProKit.framework with my backup version cured the problem.

    If you don't have a backup you can download an older copy and install following instructions provided by member hilofoz.
    http://discussions.apple.com/message.jspa?messageID=5053515#5053515
    This involves permissions changes you may not want to make.
    Another option, which is preferable, is to use Pacifist and your FCS 2 installer DVD.
    This will install with correct permissions.
    Use Pacifist to open the "Install Final Cut Studio" package alias.
    When asked to insert "Audio Content 1" choose Skip.
    FInd "Contents of ProAppRuntime.pkg" in the list.
    Twirl down disclosure triangle.
    Go to System/Library/PrivateFrameworks/ProKit.Framework
    HIghlight this "ProKit.Framework" folder and choose Install from the top of the Pacifist window.
    When" Install Prokit.frsmework" opens make sure "Use Administrator Privileges" box is checked.
    Click install.
    Choose "Replace"
    A window will open with "FIle Already exists"
    Click the box to choose "Don't ask again ..."
    Click on "Replace"
    When installation is finished, close Pacifist, unmount you DVD, and repair disk permissions.
    You're done.

Maybe you are looking for