Trouble with display

my ipad mini has a problem with the display. whitelines are going horizontally and colored lines are going vertically. and if i have it on for a minute it starts to get black. can somebbody please tell me why is this happening.

hi virus
it looks like dead pixels, in normal circumstances lenovo should replace the lcd if there is more than 4 dead pixels. please, call support line and ask for warranty conditions.
( warranty conditions may change by country )

Similar Messages

Trouble with display settings for projector/Reactable

Hi,
I'm trying to install a musical hardware interface called the Reactable for use with my iMac, and I'm having trouble getting the correct display settings. It's designed to work with laptops and it works fine for the most part with my Apple Hackintosh, but I can't seem to get it working correctly with my iMac. The tech support from the Reactable company recommends that I use 1600x1200 resolution or 1024x768 (native) on the projector, but when I open my display settings I am not presented with either of those options. It only permits me to use 1024x768 and 1024x768 (stretched).
The only instance in which I can get the projection to cover the whole table is with 1024x768, but then the projection is too large. Do I need to change the scaling somehow? How do I do that?
Thanks,
Justin

1080p. If you have a Mac Mini with an HDMI connector, connect direct through there.
Otherwise you'll need to look at either: Which Macs don't have audio over mini-Displayport connectivity, need either an
Apogee DVI To HDMI Converter / SPDIF Optical Toslink+Coaxial Input Output if you have a mini-DVI or DVI (The left connector is DVI, and the right connector is mini-DVI) connector and it is Intel.
Kanex iAdapt Displayport adaptor if you have a mini-Displayport ( http://upload.wikimedia.org/wikipedia/commons/thumb/4/47/Mini_DisplayPort_on_App le_MacBook.jpg/300px-Mini_DisplayPort_on_Apple_MacBook.jpg
) connector.
Note, thunderbolt connectors look the same as mini-Displayport except they have the lightning icon symbol.
PowerPC Mac Minis, need a StarTech DVI2HDMIA connector together with an RCA minijack to red and white splitter cable.

Trouble with Display fitting to Samsung Monitor

Hey,
I just got a HDMI Samsung 27" monitor to connect to my Mac Pro. I set the setting in the system preferences to 1920x1080 like the monitor is, but it still streches things. It makes the circles into ovals. It also doesn't take up the whole monitor so it has black bars on each side. On the monitor there is no way to change this. I have heard that I might need to get a DVI to HDMI cord converter, but not sure.
Anyone know how to fix this?
Thanks!

The Video card use DVI and I downloaded your monitor's manual from here.
Look at section 3-1 about setting optimal resolution (which may be too late for you for that mentod).
Look at section 3-4, Standard Signal Mode Table.
Section 3-6 looks interesting about the on screen display (OSD) particularly Size & Position starting on page 3-7.
The specs on page 6-5 do confirm the max resolution for that monitor is 1920 x 1080.
So, I don't know. Maybe you need to do something with that Size and Position setting with the monitor's OSD.
The video card uses DVI and the monitor uses HDMI so presumably you can use a DVI-to-HDMI adaptor or cable. I think it shouldn't matter which you use.

Trouble with Display Name

My plugin targettype Name is not working right. When I start out with a new target type, it does show the display name correctly in the various places. THen when I add an instance of that target type, the display name remains good. Then the next time the GC and agent start up, the Target TYPE name shows up and the display name is gone.
I bump the META_VER but it didn't help (I saw another thread with that info).
This plugin does not have automatic discovery. The user uses Add Monitored Target from the drop-down on the agent's page.
THe OMS is 10.2 the Agent is 10gr1 on OpenVMS 8.3.
THis is from the metadata xml.
<TargetMetadata META_VER="2.00" TYPE="oracle_rdbdatabase">
<Display>
<Label NLSID="oraclerdb_name">Oracle Rdb Database</Label>
</Display>
Any ideas?
metric browser output follows the OMS output.

metric browser output follows the OMS output.I take that back. The metric browser output is correct. At least on the main page with the list of Targets it is. Display name is correct in parenthesis.
However, a target instance page shows this.
TARGET=(oracle_rdbdatabase,myOracleRdbDB)
I'm not sure if the target type field is supposed to be the display name or not.

Having trouble with display from lap top to flat screen hdtv

I connected my macbook pro 2011 to my hdtv with a thunderbolt to hdmi cable. The audio comes through but all I can see on the TV are the default mac backgrounds. What do I need to do so that my TV shows whats on my lap top?

You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to use the MacBook’s keyboard and trackpad to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor.

Satellite C850D - troubles with display driver

Hey everyone
I'm having some trouble trying to find the video drivers for my Toshiba Satellite C850D.
Have tried direct download from Toshiba and AMD website and nothing works (catalyst 12.6).
Any help on this would be appreciated.

Hi
I could find the graphic card driver for the Satellite C850D on the Toshiba European driver page:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
Choose:
- Notebook
- Satellite
- Satellite C series
- Satellite C850D
- Display driver
The drivers were uploaded 16.07-18.07 2012
You can find the versions: 8.942-120213a-133550 and 8.932.5.3-120120a-13 for Win 7 64bit and 32bit

Trouble with display on desktop.

I just made a site, and it formats perfectly on my laptop, but have heard from many people that it doesn't display well on their desktops. Has anyone had this problem before?

Hi,
Thanks for your reply. Sorry I didn't provide the link earlier. Here it is:
www.congressional-distrust.com
Thanks again
Kevin

Satellite A200-25Z: trouble with display driver

Hi,
I'm trying to install WIN XP on a A200 25Z. At first all seemed to work fine but now I constantly get a bluescreen before xp loaded completeley saying something like memory problem on ati2mtag.dll driver
Sometimes, it does start but then when I have to restart next time it won't start up again...
I've reinstalled xp now several times, updatet the bios to the xp version but still the problem stays the same.
Anyone else had a similar experience like that?
Best

> The problem is now, at first it seemed to work. But about two weeks later after I installed a game the next restart came up with a blue screen. The game itself didn't have any problems. Just the next restart. And since then whatever I try doesnt really help it.
It looks like the error with you graphic driver appears only after the installation of the game. For me it sounds like a compatibility issue with graphic driver and the installed game.
I have noticed that some other notebook series use the same graphic card Mobility Radeon X2600.
So try to use the ATI graphic driver from Toshiba European driver page:
Satego P200 PSPBBE
Equium A200 PSAE8E
Equium A210 PSAENE
Satellite A200 PSAE6E
Satellite A210 PSAELE
Satellite P200 PSPB6E
Satellite P200D PSPBQE
Satellite Pro A200 PSAE7E
Satellite Pro P200 PSPB7E
Bye

Update of photoshop CC - trouble with NVIDIA Quadro 1000M display driver. PS freezes

Hey guys,
Since today I've got trouble with my PS CC.
I've updated PS CC yesterday 2014-12-12.
I was doing some drawings today and two times PS freezes during switching layers of or selecting a mask.
A message appeared that there was trouble with the display driver an PS switched off the GPU support because of that issue.
Ok, I thought let's update the display driver and so I've done today. I switched to actual NVIDIA display driver version 314.21
I'm working with an NVIDIA Quadro 1000M on a DELL mobile Workstation Precision M4600 with 8 GB RAM.
Now when I start up PS and press alt+k, my 2 displays showing a black screen for 1-2 seconds.
After closing the general setup window again black screen for 1-2 sec and the top menu bar is showing no entries.
When I move the mouse pointer over the bar, the menus appear again. But the bar is like transparent at the parts where no menues are.
When I unlock the window from the screen an put it back fitting to the screen everything looks like normal.
Till today I hadn't any problem with my notebook in that kind of way.
Maybe someone has or had similar problems.
Would be nice if someone can help me.
thanks

Oh, that sounds very bad. It's not that bad for me. It's not crashing that often at the moment, only black screens at start up or if setting dialog is opened. But I will see tomorrow how often it will crash, during today it crashed 2 times when doing some ridiculous simple actions like switchid to another layer and the other time when trying to edit an mask layer. I will contact the support chat on monday regarding this issue. Maybe there is a solution or an update soon... I keep may fingers crossed for you.

HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
Hi all,
When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated. However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
Thank you!
HN

Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG? Show the same area of the photo and zoom to 100%.
It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
The amount of grain depends on the ISO sensitivity setting on the camera.

Trouble with color on Presario, No red tones on display. Not a monitor issue.

Am experiencing trouble with color on Presario, model no. CQ5500F. Purchased a couple of years ago, and trouble was present immediately. Am getting no red tones - red items appear black or sometimes blue. Was told by HP that it was a monitor issue, and let computer slide out of warranty. installed new monitor today and problem still exists. Is this merely a display adjustment of some kind? Or will I have to pay HP their $99 for a one time fix? Any suggestions appreciated.

Hello UncleBob62,
It could be the display driver that is not properly working
1. Click on the start icon
2. Right click on computer and go to properties
3. Select Device Manager
4. Expand display adapters and right click on the video card driver and uninstall
The computer screen will go blank
On the keyboard press the windows key the right arrow key twice and then the letter R.
At this point your computer is going to reboot. After the reboot Windows will install generic drivers for your video card. Do you still see a lack of red tones?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with mobile site. Displays for a second then screen goes black.

Trouble with mobile site. Displays for a second then screen goes black. Using safari, 4s on Verizon. Example: m.mlb.com/lad/

I hadn't checked the site since January or so, when it worked. It might be related to the Opening Weekend skin they have on the site, but for me, it shows the top part of the page for 3 seconds while it's loading (scrolling down is impossible) and then all of a sudden it turns black, showing nothing. It's that way for every MLB mobile site.
At first:
Two seconds later:
I noticed this on 4/7/12. Does anyone NOT have this problem?
Matt

I have some trouble With the graph XY, if I display a curve and try to zoom on it, it may be corrupted, or may disappeared.

In fact this happens on some computers. the graph XY causes some trouble when zooming. Sometimes, when I run my main program and open the window with the graph, it has change the displayed it overflows to the edge of the windows. Or somtimes it works but if I zoom the curves disappeared, or is corrupted.
I have this for instance on a computer with win 98 and a ATI graphic board. So I try to update all drivers but noting has changed. I try to decrease the hardware acceleration, and it seems to happen less oftenly.
Does anybody have seen that kind of trouble ?

> I have some trouble With the graph XY, if I display a curve and try to
> zoom on it, it may be corrupted, or may disappeared.
>
I think what you are describing is not due to video driver, but rather
to the way the graph works. The LV graph maps points to integer screen
coordinates and draws lines be tween those point. When the numbers are
way to large to fit on the screen, the numbers are pinned to a special
large value. When this happenson one axis but not the other, it causes
the slope of the line to change and potentially not cross the screen.
If this is the same effect I'm describing, it only takes place when you
zoom into the data by a large extent, pushing the other points about ten
to fifteen monitors away. At this point you are no longer
looking at
measured data, but rather just on the interpolation of a line between
two points. The solution if you must have one is to resample your data
on the diagram to contain more points.
Greg McKaskle

Macbook Pro Retina trouble with projector after using Thunderbolt display

I used my macbook Pro Retina with my Thunderbolt to VGA adapter all through the fall, and never had any trouble with it. Just before Christmas I got a Thunderbolt display.
Since that time, whenever I connect the projector, I get a black screen. I can see and move the mouse, but nothing else. Other computers still work with the projector.
I'm not certain if the Thunderbolt Display has anything to do with this or not, but it's just the timing that it happened.
Grateful for anyone that can offer help!

It might be that the Thunderbolt output is set to the resolution of the Thunderbolt display, which the VGA adapter probably cannot display correctly. You can toggle between the video display modes using Command-F1... This will toggle the output between Mirroring and Extended Desktop. Using Command-F2 will allow you to attempt to detect displays. It might auto reset to the correct resolution using Command-F2. If you can get the VGA out to display using extending desktop then you can change the resolution to work properly with the VGA projector.

Trouble with display

Similar Messages

Maybe you are looking for