Trouble with Drive&Walk USA license and 2.0

I've tried to 'update' my license and the only thing that shows up is a city guide I purchased. If I exit and go back in it shows the Drive&Walk license I have with 328 days remaining.
If I try to Navigate it takes me to the purchase screen and wants me to buy a license. If I manually add the code it says invalid code.
I tried calling Nokia USA but even though 2.0 was released they said they wouldn't support it because it was released in Europe not the USA.
I'm wondering if this is a known problem and/or how to get support for this product. I thought I read in the beta FAQ and the final FAQ that my license was supposed to be valid.
Help Nokia?
Brad

Unfortunately, there's not a lot of advice I can offer. You could try blowing away all of the Flash Player data via Control Panel > Flash Player > Advanced > Delete All. It would also be interesting to know if this is reproducible in other browsers (IE, Firefox).
The debugger is really slow compared to the release player, so you don't want to use that for general browsing.

Similar Messages

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

HELP. 3 years ago I purchased cs3. I had troubles with registering the serial number and used my university's suite instead, and (stupidly) did not sort it out. I am now wanting to subscribe to the online creative cloud with my cs3 discount. Is there any

HELP. 3 years ago I purchased cs3. I had troubles with registering the serial number and used my university's suite instead, and (stupidly) did not sort it out. I am now wanting to subscribe to the online creative cloud with my cs3 discount. Is there any way to find / prove that I had purchased cs3 and locate a serial number? On my Adobe account it does not show my purchase of cs3 (I am guessing because of the trouble with registering my serial number). I have moved house 3 times since the purchase and am unable to locate the packaging or disk. Is there any way to prove my purchase without any serial number or showing under my Adobe account? Please help! Thanks

The CS3 discount offer is only for retail online product, it does not include education or volume license purchases. Refer to Terms and Conditions | Adobe
To check whether you had retail CS3 purchase, we need proof of purchase as well as serial number, without which the issue can not be resolved.
Regards
Rajshree

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

A Cloud subscription provides for installing working installations on two machines. You can have mixed operating systems (both Windows and Apple's OX).

Trouble with Adobe CC desktop app and account

Hi. I'm having trouble with my Adobe CC teacher and student subscrition and the Adobe CC desktop application. On my Macbook, adobe CC desktop application doesn't recognize my adobe subscription, but on the Adobe web site page there is my account page and i see the FREE subscription and the Premium, correctly paid. I try to uninstall the Adobe CC desktop app and to logout of adobe cc folder, but when i reinstall the desktop app, it recognize the free subscription and not the Premium. Someone could help me, please?

Lo Zerba for information on how to resolve the connection error preventing your membership from being validated please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.

Updated iphone 5 to iOS 6.1.3, now trouble with keyboard not responding correctly and screen zooming in by itself...

updated iphone 5 to iOS 6.1.3, now I am having trouble with keyboard not responding correctly and screen zooming in by itself...
Buttons pressing themself...
Also, my main screen is permanently zoomed in...
suggestions?

Double tap the screen with THREE fingers, that should get it back to normal again.
Then go into Settings > General > Accessibility > Zoom > OFF.
Not too sure about the keyboard and random button presses though. Back it up and restore from iTunes, see if that fixes it.

Trying to defrag my macbook pro(2010)with drive genius startup disc and the disc is stuck in my computer. How do I get it out??

Trying to defrag my macbook pro(2010)with drive genius startup disc and the disc is stuck in my computer. How do I get it out??

Try these options:
Credit Kappy.
Look at these discussions:
https://discussions.apple.com/message/6369213#6369213
https://discussions.apple.com/docs/DOC-4032
Ciao.
Message was edited by: OGELTHORPE

Having trouble with momentary delays while scrolling and typing, new problem that seems to be getting worse every day. Mouse?

Having trouble with momentary delays while scrolling and typing. It's a new problem that seems to be getting worse every day. Mouse? Internet connection? It's driving me nuts!

Hi
Did you find a solution ?
I have the same problem on my iPhone 4

Having trouble with mail..Wheel spins and mail hangs up when mainly when sending

Having trouble with mail..Wheel spins and mail hangs up when mainly when sending

Have you many items in outbox? Seen this where a message has a large attachment and I stuck

HT1550 I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

You can't do it in one step. Add to iTunes first, Once the tracks are in iTunes you may convert to a different format.
tt2

I have been having a lot of trouble with the latest itunes update and my ipod classic 80Gb i.e. being unable to sync songs, but now i have no files at all on my ipod, it is completely blank when i view it from my computer. I need help, please, anybody.

As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK Computer Inc. K50IJ
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038B8600B98D1E0
Current user is not an administrator.
The current local date and time is 2014-03-21 16:52:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Trouble with transfer from older LR and machine to LR5 on a newer computer

I have used LR1 for several years on an ancient Mac G4 so not a beginner but didn't find anyplace else to post a question. If anyone cares to redirect me to the right place, I welcome that.
The library module has always been a mystery, I've always been groping in the dark. In spite of that, I've processed a few thousand raw files and have always been comfortable with adding metadata, and working in the develop module, which is all that I need.
I have just acquired a fairly new MacPro, and downloaded a trial version of LR5. But making the transition to the new machine is proving to be a barrier. I think the issue has to do with LR5 not finding the correct path to the actual images, and I don't know enough to help it do that as efficiently as it could probably be accomplished.
Here's what I've done without trouble:
1. On the G4, made a copy of my LR catalog, and gave it a distinct name.
2. Formatted a new large HDD on the MacPro dedicated for image files (not the boot disk).
3. Copied my image files from the G4 to the new HDD in the MacPro.
4. Downloaded the LR5 trial version.
5. Moved the renamed LR catalog from the G4 to the Mac Pro.
6. Opened the catalog with LR5 on the MacPro and selected Library module.
LR5 had problems finding the right path to the images, as indicated by the icon shown in the grid on the upper right corner of the thumbnails - and by the absence of actual images which were instead just empty squares. LR did properly show the HDDs on the MacPro, both the boot disk and the second disk dedicated to images, but the image folders were not listed within the one dedicated to these new images, even though that's where they were saved. Farther down on the left panel LR5 showed my original jumble of folders, but listed them as being still located in the old HDD, as indicated by the name of that volume. And of course there were the question marks, which I have grown to know and....uh, tolerate.
So the LR needed to know how to find the correct path. I didn't know how to direct it, and a LR savvy friend also was stumped also. So I experimented. Unsuccessfully.
I should explain what I mean by the "jumble" of folders: On my G4 Mac, the actual heirarchy of folders from my hard drive never appeared in LR, it was just a list arranged alphabetically. That was inconvenient, but I didn't know why that was happening and didn't know how to fix it.
I found that I was able to help LR5 locate the images by clicking the exclamation point icon, and that brought in the images with all the metadata and develop settings. But I was only able to do that with one folder at a time, and given the number of folders, that was going to be a long and very tedious project. I was sure there had to be a better way.
I made some progress using the contextual menu to "update folder location" but again that was just as tedious to do, it was working only one folder at a time.
I then selected one folder and clicked "synchronize folder" which located a much larger group of images and added them where they needed to be in the left panel within the correct new volume. The bonus was that the proper folder heirarchy was included. However that process did not bring along the metadata, ie, keywords and previous develop module settings, and that was a deal breaker, I don't want to lose that metadata in the transfer, and I'm sure I don't have to, I know LR is smarter than that.
My original image files, and the original catalog, are all still backed up on my old computer, so nothing is lost, it's just not being transferred properly.
What is the best choice now? I have no problem with starting over with LR5 - deleting the renamed catalog and making another copy on the old machine, moving it to the MacPro, and working with that. If I do, how do I help LR5 find the right path to my existing images with metadata and develop settings, without the laborious process of doing it for every folder?
I'll be very grateful for any and all advice, thanks,
Gary

Jon,
What Julianne said at first about re-linking made perfect sense and I followed it easily, had actually already been there. But in my situation now, it didn't have any effect. The directory of folders which had already been added were still just as they were, and the outstanding balance are not in the desired position. And the folders which had been brought in earlier today when I clicked "synchronize folder", were still missing all the metadata.
Maybe this means I need to start over, and I'm fine about doing that that, but I don't know what it takes to accomplish that. I'm concerned now that any changes I make out of guesswork could only make the problem harder to resolve. It just feels to me like something I did at the beginning just wasn't right, and now it's a tangle.
Can you advise?
Thanks,
Gary

I'm having trouble with a multi channel acquisition and download with PXI-5922

I am having trouble with getting data out from both channels of a PXI-5922. My software seems to be working, but when I do the fetch there is no data for the second channel. I am using the same format for all of the channelList inputs (0,1). I've checked the instrument handles and anything else I can think of, but this is my first time trying to collect data on 2 channels of a digitizer. Any help would be appreciated.

Hi schliepe,
Try checking your code against an existing example. The
Developer Zone Example: Independent
Channel Configuration with NI-SCOPE is a good VI to reference. Also note
that there are several examples that come with the NI-SCOPE driver. They can be
found in Windows by going to Start »
Programs » National Instruments » NI SCOPE » Examples. Additionally, if you find that the examples are not working either, verify that both channels are functioning by running the
NI-SCOPE Soft Front Panel.
Please post back if you have any questions. Have a great
day!
Ryan D.
District Sales Manager for Boston & Northern New England
National Instruments

I'm having trouble with the sync all feature and i'm not sure what to do about it

i'm using Lr 5.3 on a windows 8.1 and a really fast laptop "can render movies in after effect in minutes"
the problem i'm having is when i click the sync all button and the top loading bar moves like everybody, only the pictures viewed in my bottom slider will change even if i leave it for hours and this happen with big and small number of pictures so i tried reinstalling it and that didn't work
i do a lot of timelapses and i thought maybe if i export the video they will show with the edited settings and that didn't happen and it showed the pictures that i havent moved to view blured, like the same blue when you move fast between raw pictures
so i t tried exporting them and that worked fine but takes ages, the pictures still didn't change in the viewer but all the exported pictures did and thats not helping me in my job !
FIND ME A SOLUTION please cause i'm dealing with 500-1000 picture here and i need to move the slider every 20 sec or so every picture is changed and this takes time and effort guys !

It could be overheating..........thing is ....i never realy though ibooks got that hot....the ibook does not even have a cooling fan...at least my blueberry 300mhz doesn't.
I would have to say sounds more like your hard drive may be starting to fail you.

Trouble with connecting to an App and restoring In App Purchases

I am having trouble with restoring my in app purchases. I had purchased the full season for crazy night out a while back but when I got the app again after restoring the app the full season wasn't on and it is trying to charge me for it. I had also bought the fantasy date app and the multipacks and unlike crazy night out it recognizes I made the purchase but when I click restore purchases or buy pack it won't download and it says can not connect to server and for me to check my settings and try again also for the ones I do have that were free when I click play or download all videos it says it can't connect to servers and the videos don't play. Is there anything I can do to retrieve these purchases back and get the videos to play.
It's not the Internet everything else works.

ftp doesn't work well in modern network environments, and the design of the protocol itself is basically incompatible with the inclusion of firewalls in modern networks. And it transmits the authentication credentials in cleartext.
Put another way, see if ssh and particularly sftp works here (either directly via the sftp command, or via a sftp GUI tool) works for your requirements.
Failing that, [here is ftp set-up information|http://labs.hoffmanlabs.com/node/942].
If it's the DNS set-up, then here is some [DNS server set-up information|http://labs.hoffmanlabs.com/node/1436]. And your Mac OS X client will need to have access to the same DNS information your server is using.

Trouble with Drive&Walk USA license and 2.0

Similar Messages

Maybe you are looking for