Trouble with drivers

2 years ago I purchased new ram and a new video card for my computer. I recently reloaded windows xp, and I don't have a driver for my speakers or my video card, and I don't know what kind of card it is and I can't find the right driver for my sound. How can I find these?

I'm not sure how your RAM/graphics card has anything to do with a sound card driver...
But go to the website of your computers' manufactuer and they "should" have a support/download page that you can search for your model and find the drivers you need.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Similar Messages

Re: Tecra S10 troubles withe drivers

Hey
I have on my Tecra S10 (PTSB3E) Windows 7 64bit installed.
In the device-manager i have the "PCI-Communicationscontroller" without the correct driver. What have i to do, that this item gets the correct driver?
A Secoud problem is with my docking-station. I have the PA3680E. When i have my S10 docked on the station i have another device without the correct driver. The USB-Serial Controller. Also the Fingerprint-Reader gets an error when i start the application.
Can anybody help me to get the system correct insalled?
Thanks
Thomas

Hello
Who knows what have you installed and which drivers are missing.
So here is install order for your tecra notebook. Check it out to see if all stuff is installed or not:
Win7
Chipset Utility
Matrix Storage Manager
TOSHIBA Value Added Package
TVAP Button Setting install
Display driver
Realtek HD Audio Driver
ALPS Pointing-device Driver
TOSHIBA Software Modem
LAN Driver (EnergyStar support)
Wireless LAN Driver
Bluetooth Stack for Windows by Toshiba
Intel AMT Management Engine Interface
RICOH Media Driver
O2Micro Smart Card Reader Driver
TOSHIBA SD Memory Utilities
TOSHIBA SD Memory Boot Utility
TOSHIBA Wireless Key Logon
TOSHIBA 180 Degrees Rotation Utility
TOSHIBA HDD Protection
TOSHIBA ConfigFree
TOSHIBA WPS Library
TOSHIBA Management Console
TOSHIBA Assist
TOSHIBA Security Assist
TRS Driver for Etude
CD/DVD Drive Acoustic Silencer
Infineon Trusted Platform Module Utility
Infineon TPM (Trusted Platform Module) Installation Guide
Authentec Fingerprint Utility
Chicony Camera Assistant Software
TOSHIBA Face Recognition
TOSHIBA SSD Alert
TOSHIBA PC Health Monitor
TPCHFsDate.exe for PC Health Monitor
TOSHIBA Cooling Performance Diagnostic
TOSHIBA Power Consumtion Meter
TOSHIBA USB Sleep and Charge Utility
All stuff must be installed in this order. If some driver on this list is missing try please to install driver designed for Vista 64bit.

Y50-70 trouble with intel drivers

Hi, I'm having a problem installing some of the intel drivers on my Y50-70, I had some trouble with my OS and decided to downgrade to windows 7 which ended up needing the Partition type change which wiped the disk, so here I am.I'm on Windows 7 64-bit, I've installed most of the drivers but there are 2 that just aren't working, the only driver I have actively not installed is the webcam driver, because I'm paranoid The drivers that aren't working:Intel Management Engine Interface Driver 9.5.15.1 730-"The setup program failed to install one or more device drivers. Setup will exit."andIntel Video Driver for 64-bit Windows 10.18.10 .3574/6. 16.0.3137- "This computer does not meet the minimum requirements for installing this software"In my Device manager my current display adapter is listed as:Standard VGA Graphics adapterand I have a few items with yellow alerts, these are:3D Video ControllerEthernet ControllerPCI DevicePCI Simple Communications ControllerAny ideas as to why I can't install either of the Intel drivers?This is driving me nuts, any help will be greatly appreciated. Sorry for the bunched text, apparently the spaces I used made the post complain about invalid HTML, today is not my day.

If you don't need the Management Engine, don't bother installing the drivers for it. Disable it in BIOS too.
As for the integrated graphics driver, you need to unpack it, then manually install it using Have Disk from Device Manager.

Trouble with 3 ATV to connect to iTunes in one WiFi / LAN

Hi community,
I've trouble with my ATVs in my network. I have 1 3Gen. ATV connected via LAN to iTunes on iMac and 2 2Gen. ATVs via WiFi. The problem I am facing is, if I am connected with two of them to my iTunes Library the third can't even the others ( which have been conneted) are off. If I restart iTunes, I can connect again two of them and the third (doesn't matter which one) cannot. So I can circle arround which one gets connected but it is not very satisfying.
My network is setup on two Airport express and a TC 2Gen to cover the whole house. As I stated above, the ATV 3Gen is connected via Lan, and the other two via WLAN?
Any idea what I've made wrong, or what to do to find the problem?
Thanks in advance

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

TS1468 I am having trouble with two cover flows duplicating themselves more than once, is there anyone out there that can help me with this, they are not duplicated in my itunes library, just the ipod.

I am having trouble with two cover flows on my IPOD, duplicating themselves more than once, they haven't duplicated themselves in my Itunes library, just the ipod, could anyone have any ideas on how I could fix this problem. I have tried so many times, even if I restore the ipod, it still does the same thing. Please if possible email me at [email protected] with any suggestions.

Aha! I have sorted it.
For those with similar problems, the solution is this:
Macintosh HD > Library > Audio > MIDI Drivers
Then delete DigiDioMidiDriver.plugin

Trouble with color on Presario, No red tones on display. Not a monitor issue.

Am experiencing trouble with color on Presario, model no. CQ5500F. Purchased a couple of years ago, and trouble was present immediately. Am getting no red tones - red items appear black or sometimes blue. Was told by HP that it was a monitor issue, and let computer slide out of warranty. installed new monitor today and problem still exists. Is this merely a display adjustment of some kind? Or will I have to pay HP their $99 for a one time fix? Any suggestions appreciated.

Hello UncleBob62,
It could be the display driver that is not properly working
1. Click on the start icon
2. Right click on computer and go to properties
3. Select Device Manager
4. Expand display adapters and right click on the video card driver and uninstall
The computer screen will go blank
On the keyboard press the windows key the right arrow key twice and then the letter R.
At this point your computer is going to reboot. After the reboot Windows will install generic drivers for your video card. Do you still see a lack of red tones?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Are people still having trouble with iPhone/HP Laptops?

Since I've had my Envy I've had no end of trouble with getting it and the iPhone to play nice. Any my search continues. So far, I have updated every bios, reinstalled Windows 7/iTunes many times, have restored the iPhone far more times than I care to remember and I am STILL having troubles with this thing. Having got through the Syncing issues with the PM55 chipset and iPhone I can now sync with my laptop. However all is not well as it would seem that I cannot sync my photo's. It doesn't matter if I have 0gb, 15gb or 30gb free, iTunes is telling me that there is not enough memory available. This error seems like an old one and there is even some info in the Apple KB but after following all that I still can't get it to sync my photo's.
Some info on my setup:
HP Envy 15 (all the latest drivers installed, bios F.24) Core i7-820, 8gb ram etc.
iPhone 32gb, ver 3.1.3
iTunes (whatever the latest one is)
I should add that I can sync my iPhone with an identical install of intunes on my vintage Quad core desktop PC, but as I use my Laptop a lot more (and have all my media, email, and contacts etc on it) I would prefer to sync to it.
Is there anything that I can do? Its very frustrating to have blown $4k on this equipment and it doesn't work...

Well I tried deleting the photocache but alas, no luck. I also tried syncing with just the photo's enabled, and it worked! So then I enabled my other media and that copied across too! I thought I was on a bit of a roll here, but now whenever I try and sync it will do one of 3 things:
iTunes will crash.
iTunes will indicate that there is not enough memory on the device (+9GB free)
iTunes will remove the iPhone from the sidebar (and my computer/disk management) even though it will continue to charge.
Interesting point to note is that it works fine (cable/iphone/itunes/media library) on my desktop and macbook. Still really disappointed that I cannot get these two to cooperate. Also still haven't got any contacts from outlook but that may not be related?

I have some trouble With the graph XY, if I display a curve and try to zoom on it, it may be corrupted, or may disappeared.

In fact this happens on some computers. the graph XY causes some trouble when zooming. Sometimes, when I run my main program and open the window with the graph, it has change the displayed it overflows to the edge of the windows. Or somtimes it works but if I zoom the curves disappeared, or is corrupted.
I have this for instance on a computer with win 98 and a ATI graphic board. So I try to update all drivers but noting has changed. I try to decrease the hardware acceleration, and it seems to happen less oftenly.
Does anybody have seen that kind of trouble ?

> I have some trouble With the graph XY, if I display a curve and try to
> zoom on it, it may be corrupted, or may disappeared.
>
I think what you are describing is not due to video driver, but rather
to the way the graph works. The LV graph maps points to integer screen
coordinates and draws lines be tween those point. When the numbers are
way to large to fit on the screen, the numbers are pinned to a special
large value. When this happenson one axis but not the other, it causes
the slope of the line to change and potentially not cross the screen.
If this is the same effect I'm describing, it only takes place when you
zoom into the data by a large extent, pushing the other points about ten
to fifteen monitors away. At this point you are no longer
looking at
measured data, but rather just on the interpolation of a line between
two points. The solution if you must have one is to resample your data
on the diagram to contain more points.
Greg McKaskle

Satellite L755-16J - Trouble with sound card

I currently own a Toshiba *Satellite L755-16J* and it is having some sort of trouble with the sound card, i think.
When i bought it, it came with windows 7, i changed the windows to windows 8 and since then the audio has been troubling me.
The internal speakers work for a minute or two when i play an audio file but then stop working.
i had been using an external usb soundcard and external speakers for some time but decided to switchback to windows 7 for the sound to work properly again. even though i have switched back to win 7, the sound still doesnt work.
I am quite sure that the problem is not in the internal speakers because they do work, although just for a brief moment but they work, so i am guessing the problem is in the software instead of the hardware.
i tried updating the sound drivers but they seem to be up to date, according to windows the drivers "seem to be working properly"
Can anyone help?

> even though i have switched back to win 7, the sound still doesnt work.
How did you do that?
Did you use the Toshiba Recovery Disk in order to install Win 7 or did you install the Win 7 using fresh and clean Windows 7 disk?
The notebook supports Conexant sound chip. The sound driver is available on the Toshiba EU driver page and in case the sound chip is already recognized in device manager after the sound driver installation, I assume the driver has been installed properly.
In such case I would recommend you to connect the headphones.
In case the headphones would function properly, the speakers might be affected. I mean the hardware. But of course its only an idea.
Beside the headphone check, you could check also the settings within the control panel -> sound -> playback tab.
Usually the speakers should be set as default device.
Check this option too.

Has anyone had trouble with the middle mouse (open in new tab) button lately?

Hi gang. Since v29 came out, I have been having trouble with the middle mouse (open in new tab) button.
Sometimes the button does not register with Firefox. And sometimes FF acts like I pressed it several times.
Has anyone else had any problems? I use an add-on called
'''''[https://addons.mozilla.org/en-US/firefox/addon/mclickfocustab/?src=collection&collection_id=33bf10fa-666d-45a2-9bc9-491ce21671c6 MClickFocusTab]'''''
I disabled it but the problem was still there.

''''' "Sometimes the button does not register with Firefox. And sometimes FF acts like I pressed it several times." '''''
Sounds like a mouse on its' way to mouse-heaven. Seriously, the exact symptoms I have seen with a dozen 3 button mouse's (?meese - ?mice) over the last 15 years. <br />
Not registering a click is usually due to a dirty contact. And the "double-click" is when the flat spring looses tension and bounces.
I have had similar happen with the left button, too. But when it happens to that button it is more noticeable much sooner.
I bought a box of a dozen A4D house branded infrared wireless 3-button mouse's for like $24.00 back in 2000 that were on clearance because the driver disk didn't support W2K, only Win95, 98, and NT4. I got newer drivers from the A4D website and wore all 12 out over the 8 or 9 years. I even fixed a few that broke from the parts from other broken mouse's. I still have 6 or 7 of them laying in the "needs to be fixed" box under my workbench. I'll probably never fix them though, the nano receiver USB mouses I have been using for the 4 or 5 years have much better battery life and lately only need one AA battery.

I am having trouble with my candy crush saga game. It will not allow me to purchase more lives. The finances are fine. What do I do to get it to allow me to purchase more lives?

I am having trouble with my candy crush saga game. I am not being allowed to purchase more lives, even though the finances are ok.

Aha! I have sorted it.
For those with similar problems, the solution is this:
Macintosh HD > Library > Audio > MIDI Drivers
Then delete DigiDioMidiDriver.plugin

Anyone else having trouble with flash player over working the processor since the security update?

Hi everyone-
Since the last security update (flash player version 11.7.700.169) I have been having trouble with flash player beating the daylights out of my processor. My OS is Windows XP. This only happens on some sites, not all. For example netflix and amazon are fine, but acorn and huffington post videos send the processor into overdrive. Anyone have any ideas or suggestions? Thanks in advance :-)

I have XP on some machines, and I do not experience any such problems with 11.7.700.179. If I were, I would try two things
update the graphics drivers; see http://forums.adobe.com/thread/945765
update to the latest Flash Player beta, or wait until the new version is released later this week

Trouble with safari after updating SL 10.6.8

I updated my OS last night to 10.6.8 and today, in Safari I find that I cannot view amazon.com When I open a page, much of it is blank. Anyone else having trouble with amazon after updating to 10.6.8?
michelle

(This is a copy of my post in this thread.)
I updated to 10.6.8 too, was suddenly unable to print to my before perfectly working printer (an HP Color LaserJet CP1515n hooked up to an AirPort Express), and started scouring the web for solutions. The more I tried, the more disappointed and frustrated I became. Then I came here, read about a possible solution in this very thread (the disk image 'Repair10.6.8.dmg') and became hopeful again.
But alas...
Sadly, this isn't working for me at all. I ran the script that supposedly fixes the print problems introduced in 10.6.8, but the print jobs still all pause the printer and fail with a 'broken pipe' error. It has nothing to do with the USB cable, as I can print just fine with the printer directly hooked up to my Mac wit that very same cable. I reinstalled the drivers, updated my printer's firmware, ran the repair script twice just to be sure, reset the printing system, even deleted all preference files with 'hp' in the name and having to do with printing, restarted my Mac. All with no result.
Man, this is so frustrating! Anybody with any other suggestions or possible solutions?

Troubles with videocard dv6-6179er

After installing and using win 8.1 on my notebook, i decided to install AMD Catalist Center, because before it screen driver was installed automatically by windows, so, after installing driver for my Radeon HD 6500 M from official site , notebook starvated with black screen. After that I tried to install drivers from your site and from official site on win 7, win 8 . Results: installation process... "display driver is installing" screen should turn off three or more times, but after seccond extinction notebook is starvated. And next starting up is not successful, asking to recover system, after that process no video drivers on notebook is located.
More, I tried to recover system to factory parameters from CD, but after full recovery system is not started like after the installation video drivers, that is why i think that total trouble with my video card. What should I do? Thanks!

Hello @VladimirRus ,
Welcome to the HP Forums!
I understand the computer is experiencing all sorts of graphics issues. It definitely does seem like the hardware is failing, but I will suggest a couple things to try.
Since you reinstalled the OS, try installing the graphics driver again:
AMD High-Definition Graphics Driver
Intel High-Definition (HD) Graphics Driver
*Windows 7 is the only supported OS on this computer. I would have to advise only using Windows 7 64-bit.
If that doesn't help, I would call HP phone support, to possibly address the hardware. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks!
Mario
I worked on behalf of HP.

K9a2 platinum motherboard, trouble with mouse/updating bios.

Hello all, I have a MSI K9A2 Platinum mb, using vista 64 bit. I wanted to flash my bios, Pretty sure I have 1.4, wanted to try 1.8, or 1.9. When I go to download center will ask me where I want to download from, I click on U.S nothing happens, even tried the other countries nothing. Up top tab will say blank page and go back to download center. Reason I wanted to try and flash my bios to update it is. I have a USB razer lachesis which I have to unplug and plug back in several several times a day, Im having trouble with it lagging or stuttering. I have tried every driver update new and old and nothing works. I have unchecked enhance pointer precision, I have tried every usb port on my computer. Nothing. I have tried updating my video card, on board sound drivers, mouse drivers nothing. Im at a lost. I have no clue on what else to try. Do you think updating my bios will work? Thank you all for reading this. Hope it makes sense)

Quote from: Stu on 12-April-11, 02:42:09
Get another mouse. I bought a Razer Copperhead a few years ago, and had similar troubles on several different boards. I just use cheap generic mice again now, they just work.
QFT
I just use some leftover kensington notebook mouse (ci25m), even though its small it fits my fingers(not my palm, just my fingers ..because my hand/palm is huge lol) and it just works. The only time I bought a really spendy mouse (creative fatality) I only ever had problems with it.

Trouble with drivers

Similar Messages

Maybe you are looking for