Trouble with FCP 7 and Share (for Blu-Ray)

I've done a bunch of reading in this forum this morning and I see that pretty much everyone agrees NOT to use the Share option within FCP7 for burning a blu-ray.  But I haven't come up with an exact answer as to why.  Until now I've actually had good success with this, although I have not compared it directly with a BD created in Compressor or Toast 10
That would be great to know, but more importantly for now here is my question:
I wanted to burn a BD from FCP7 using Share.  The project is 1 hour in length and the export took 5 hours.  When it got to the point of burning the BD it gave me an error message saying that the Blu-ray drive was in use by another program.  My only option was to cancel the burn, and thus start all over again!! 
However, checking the scratch discs it appears that the video and audio files were created. So the root of my question is... what can I do with those created files now?  Can I put them into Compressor?  How can I burn a BD from those files without having to go through the 5 hour export again?
Thank you very much!!
Eric

Hi Eric, here is a response a I just posted for someone else...
How odd that the BluRay disc using share will not play... I've used Share before successfully, except since I don't have a blu ray burner, I burned a AVCHD disc (which only plays on a BluRay Player).
Perhaps you took a wrong turn somewhere... What were your EXACT steps?
Do you have Toast? That may be another solution... Follow this thread on Creative Cow for that: http://forums.creativecow.net/thread/20/861769
Here is a tutorial on using Compressor (I have not watched, if it s u c k s, sorry): Compressor 3.5 Tutorial: Burning a Blu-Ray and/or DVD - YouTube
Here is the Kenstone tutorial for creating a AVCHD disc... perhaps it will shed some light in case you did something wrong:http://www.kenstone.net/fcp_homepage/burn_br_mac_superdrive_stone.html
Anyhow, hth...

Similar Messages

  • Authoring and codec for Blue Ray

    Hi,
    We must deliver a Blue Ray DVD in a few months.
    Everything has been edited in 1920X1080 23.98 p.
    1) Can we compress the program in MPEG-2 like SD-DVD ?
    2) Can we make the authoring in DVD Studio Pro 4.2.1 ?
    thanks

    Antoine,
    BR authoring on the Mac isn't really possible yet. PP CS3 does include Encore which will do a very limited-author for BR but it's not the full specification.
    If you absolutely must author in BR and don't want to spend 100k for Sonic Scenarist (and the required hardware) there might be one way to do it effectively - but nobody has tested this yet, so you'll be on the bleeding edge of experimentation...
    You could use BootCamp with Leopard and install an XP partition; purchase Roxio's DVDit Pro HD and do your authoring on the PC side. See this website:
    http://www.roxio.com/enu/products/dvdit/hd/overview.html
    You'll have to experiment a bit with output from Compressor to provide a file that the Roxio app will like, but it might just work.
    If that's not an option, then you'll have to take your project to an HD authoring facility and pay anywhere from $5-$15k to have it properly BR authored.

  • Media Coder Failing with MPEG2-DVD and H.264 Blu-Ray Encode

    I am useing Adobe Media Encoder CC 2014 8.0.0.173 build.
    I am a CC subscriber.
    I am importing a Premiere Pro CC 2014 timeline.
    I also have Premiere Pro CS6, Photoshop CC and CS6, Encore CS6, Lightroom 5, Indesign CC and CS6 installed.  Just updated all apps from the cloud.
    When exporting the timeline to MPEG2-DVD I get the failed status.
    In the text note section this is the result: MXF decode error in "J:\Murray-Gross Wedding\CLIPS001\AA0068\AA006802.MXF" at frame 16339. Frame 16316 was substituted.
    I had several frames substituted.
    I tried both the Mercury Playback Engine GPU acceleration and I also tried the software only version.
    The original footage is;
    MXF File details:
    Wrapper type: MXF OP1a (type: SingleItem SinglePackage MultiTrack Stream Internal)
    File generated by: CANON, XF100
    MPEG-2 422 Long-GOP
    I was able to export the timeline to an avi file from Pro CC 2014.  But P Pro told me that the export had failed.  When I checked the folder though the avi file was there.
    I am running Windows 7 home premium.
    I need to make a DVD of this footage.  And would prefer not to reformat the avi file I created.  Thanks in advance.

    Do you get encode complete with Errors or are you getting encode failed (no encoded file)?  The reason frames were substituted is because the source file had errors or other problems.  So during import, PPro and AME substitute bad frame with adjacent good frame and continue to import.  But if there are way too many bad errors and source is too corrupted, it may not be able to import it correctly and won't be able to export.  so let us know if you get exported file and you are just curious what the error message was or if you don't get encoded files going to MPEG2-DVD at all. 

  • Mpeg 2 for Blu-ray audio exports with missing frames at beginning and end.

    Im using a Matrox Axio LE system and the Matrox Media encoder to export an Mpeg 2 for blue-ray. My footage is shot in 1280x720p 59.94 drop frame. I have found that after exporting the file from the encoder and bringing it into Encore CS3 that the audio that was exported is a little shorter than the video. Frames are missing at the end of the file.
    Because of this my video and audio are way out of sync. Has anyone else come across this issue?

    Maybe on the Matrox forums.

  • FCP 7 "Share to blu-ray" burn issue.

    This may not actually be a FCP issue, but possibly some of you here are experienced in the matter.
    Firstly, my video is 1080/24p ProRes.
    This is my first jump into Blu-ray, and I'm quickly learning the many work-arounds, but have run in to a problem.
    Initially I tried exporting a QuickTime with "current settings", and dropping it in toast and encoding/burning.
    Video looked pretty good, but it was choppy. Google tells me this seems to be a common issue with toast and 24p.
    Most suggest encoding with Compressor and then burning with Toast.
    Tried that, but I couldn't get it to just encode the files and that be all. It kept asking for a blu-ray disc and ejecting the drive, as if Compressor was going to burn it?
    When I would choose "cancel burn", my only option, the whole batch would fail. After all that encoding time...
    Wasn't too depressed, because after digging more, Google also told me that many believe the h264 encode using the "share" function in FCP produces better results. Though the options are non-existent, it did great. My only complaint is you are forced to convert audio to .ac3. Well that *****.
    So I went ahead and exported all the audio from IN and OUT markers as .aiff.
    This is where my problem arrives..
    I threw the h264 and aiff in Toast, chose "never re-encode", and it burnt fine.
    Video looks great, no stuttering. But the AUDIO! It slows drifts out of sync...
    Video is an hour long, and at about 20 minutes in, it's 1-2 seconds behind, and goes from there.
    Why would that be?
    Any experience with this?
    I checked, and the ac3 that FCP made, and the aiff are the EXACT same length.
    Any thoughts? Or any other work-around for keeping audio lossless?
    Thanks!

    Thanks for the reply, Johnny.
    I wasn't saying AC3 s*u*c*k*s. And really.. Why is that word censored? I didn't do that.
    I was saying it ***** that you ONLY have the option of AC3 with the "Share to blu-ray" feature.
    And yea, I'm sure I would never know the differene, and especially not my grandparents with their home movies.
    But it just seems d*u*m*b (can I say that?) to be going through all this trouble for a "lossless" lineage, ie. HD camera, FCP, Blu-ray burner/player, and have to compress the audio. Isn't that one of the main advantages of blu-ray?! Quality? Wether we can detect it or not?! Ha!. Okay..
    I thought an easy workaround would be to export the audio to AIFF and drop it in.
    No idea why it's drifting....but yes, in the end i may settle.
    Though I'll feel cheated! Guess that's what I get for loving BOTH Apple and Blu-ray....
    If anyone has other processes of getting good 24p to Blu-ray, please share!
    Thanks again.

  • FCP X fails to share to blu-ray or DVD, no chance to trash com.app...plsit from lion, what to do?

    I burned some Blu-Ray before with my new FCPX, now I get a "Failed" message when I try to share both Blu-Ray and DVD to hard drive for an image or actually burn a disc. I saw one answer was to trash the com.apple.final...plist files but I do not know how to do it from the new Lion OS, any help?

    Tom,
    Thank you so much. It trashed the files and now FCPX is burning my Blu-Ray :-)

  • Trouble With Opening InDesign and now Photoshop and Illustrator

    First off I apologize if this isn't in the correct section. I couldn't find a section specific to my problem since it involves multiple aspects of Adobe products. I was having trouble with InDesign, it kept crashing. So I followed all of the advice I could find on the forums about deleting the preferences and cache information in the Library folder, and that didn't seem to make a difference. So then I thought maybe it needed an update, so I logged into Adobe Application Manager and sure enough, it did. So I clicked on "download" and it stalled there too. Then the manager became unresponsive. I couldn't cancel the update or log out or anything. So then I saw in the forum someone suggested the Adobe Creative Cloud Cleaner Tool if your manager becomes unresponsive. I ran that and then shut my computer off. When I turned it back on, InDesign started working BUT my Photoshop is completely gone from my system (I never messed with it in the first place since I wasn't having any trouble with it.) And the when I tried to click on Illustrator it said "Do you want to begin your trial?" Huh?
    I have had a subscription since 2012, why on earth would it suddenly think that I no longer should have access to these programs? If I log on to my Adobe account it shows my subscription and that it's up to date (last payment was April 5, 2015). The versions I was using were the CS versions that I had downloaded directly from Adobe and when I used to have any trouble or when I got a different computer I could just log into my account and then redownload them. They are no longer showing under my products, so I can't figure out what on earth is going on. The website has changed since the last time I downloaded them, so that partly could be me, but I thought they would at least be showing up under products. I contacted Adobe support and the first person I talked to on chat said "this is clearly a technical issue I am transferring you to someone better suited for this," but that's all he said. And I haven't heard from anyone since so I thought I'd make a topic and see if anyone else out there has had a similar problem.

    The versions I am using are the CS6 versions.*

  • Trouble with mobile site. Displays for a second then screen goes black.

    Trouble with mobile site. Displays for a second then screen goes black. Using safari, 4s on Verizon. Example: m.mlb.com/lad/

    I hadn't checked the site since January or so, when it worked. It might be related to the Opening Weekend skin they have on the site, but for me, it shows the top part of the page for 3 seconds while it's loading (scrolling down is impossible) and then all of a sudden it turns black, showing nothing. It's that way for every MLB mobile site.
    At first:
    Two seconds later:
    I noticed this on 4/7/12. Does anyone NOT have this problem?
    Matt

  • Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T

    Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T
    I am having trouble making outgoing call or answering incoming call.
    When I try to call out from my IP 7961 phone, it fails with the message "unknown number".
    For incoming call, it rings but when I pick up the call nothing happens,
    Put the receiver back on hook, the phone carries on ringing. I am in UK
    and just trying to set up test system with one analogue line. Any help will
    be most appreciated. My config of the 2811 router is posted below. All calls ineternally works fine.
    Thank you for your help.
    hostname Test-CME
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 10.10.10.1 10.10.10.10
    ip dhcp excluded-address 10.139.139.1 10.139.139.10
    ip dhcp pool host
    network 10.10.10.0 255.255.255.0
    default-router 10.10.10.1
    option 150 ip 10.10.10.1
    ip dhcp pool data
    network 10.139.139.0 255.255.255.0
    default-router 10.139.139.1
    dns-server 10.139.139.5
    voice-card 0
    no dspfarm
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    supplementary-service h450.12
    h323
    sip
    header-passing
    registrar server expires max 3600 min 3600
    interface FastEthernet0/1
    no ip address
    no ip mroute-cache
    duplex auto
    speed auto
    no shut
    interface FastEthernet0/1.2
    description ** Data VLAN **
    encapsulation dot1Q 2
    ip address 10.139.139.1 255.255.255.0
    interface FastEthernet0/1.3
    description ** Voice VLAN **
    encapsulation dot1Q 3
    ip address 10.10.10.1 255.255.255.0
    ip http server
    ip http authentication local
    no ip http secure-server
    ip http path flash:
    tftp-server flash:S00104000100.sbn
    tftp-server flash:TERM41.7-0-3-0S.loads
    tftp-server flash:term61.default.loads
    tftp-server flash:term41.default.loads
    tftp-server flash:CVM41.2-0-2-26.sbn
    tftp-server flash:cnu41.2-7-6-26.sbn
    tftp-server flash:Jar41.2-9-2-26.sbn
    tftp-server flash:term70.default.loads
    tftp-server flash:term71.default.loads
    tftp-server flash:cnu70.2-7-6-26.sbn
    tftp-server flash:Jar70.2-9-2-26.sbn
    tftp-server flash:TERM70.7-0-3-0S.loads
    tftp-server flash:CVM70.2-0-2-26.sbn
    control-plane
    voice-port 0/3/0
    connection plar opx 202
    caller-id enable
    dial-peer voice 1 pots
    incoming called-number .
    destination-pattern 9T
    port 0/3/0
    telephony-service
    load 7914 S00104000100
    load 7941 TERM41.7-0-3-0S
    load 7961 TERM41.7-0-3-0S
    load 7970 TERM70.7-0-3-0S
    max-ephones 20
    max-dn 40
    ip source-address 10.10.10.1 port 2000
    calling-number initiator
    service phone videoCapability 1
    system message MKC CME
    url services http://10.10.10.1/voiceview/common/login.do
    url authentication
    http://10.10.10.1/voiceview/authentication/authenticate.do
    time-zone 21
    date-format dd-mm-yy
    voicemail 600
    max-conferences 8 gain -6
    call-forward pattern .T
    call-forward system redirecting-expanded
    moh music-on-hold.au
    web admin system name admin secret 0 test
    dn-webedit
    time-webedit
    transfer-system full-consult dss
    transfer-pattern 9.T
    secondary-dialtone 9
    create cnf-files
    ephone-dn 1 dual-line
    number 201
    label 201
    description Sarah
    name Sarah
    ephone-dn 2 dual-line
    number 202
    label 202
    description Vitthal
    name User2 Vitthal
    ephone-dn 3 dual-line
    number 203 secondary
    label 203
    description Neil
    name User3 Neil
    ephone 1
    video
    username "user1" password 201
    mac-address 0018.18EE.947F
    type 7961 addon 1 7914
    button 1:1
    ephone 2
    video
    username "user2" password 202
    mac-address 0018.18BB.B973
    type 7941
    button 1:2
    ephone 3
    video
    username "user3" password 203
    mac-address 0018.1885.6BA2
    type 7970
    button 1:3

    Hi
    Please find enclosed debug attachment for voice ccapi and ephone. First, I called from outside. Extension 202 rings but when I answered on extension 202 nothing happens. Replace the rceiever and the pone starts ringing again.Second step. I tried to call out by dialing 9 and then number but after a while phone displays unknown number.
    Thank you for your help.
    Vitthal

  • SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

    SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

    huge storage, low cost, high quality, very small and portable.
    BEST FOR THE COST, Toshiba "tiny giant" 15mm thick  2TB drive (have several of them, lots of storage in tiny package)    $100
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48    /ref=sr_1_3?ie=UTF8&qid=1390020791&sr=8-3&keywords=toshiba+2tb
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim perfect for use with a notebook
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s    r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    *This one is the BEST portable  external HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr    _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
    Most storage experts agree on the Hitachi 2.5"
    Hitachi is the winner in hard drive reliability survey:
    Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

  • I'm having trouble with iTunes synching and accessing the iTunes store.

    I'm having trouble with iTunes synching and accessing the iTunes store.   When synching, the process tops at the back up stage, freezes and I can't close the iTunes window, need to ctrl alt del.   When trying to access the store, the progress bar stops halfway.   I've googled heaps and tried most of the standard answers - unistall, reinstall, etc, now looking for some help please.
    This has only started a few weeks back, after working smoothly for the 2 years of owning the iPhone 3gs.
    Any suggestions will be appreciated, it's getting realy frustrating.
    Cheers for now,
    Marty

    http://support.apple.com/kb/HT1923?viewlocale=en_US
    this worked perfectly for me, with no loss of library! BUT was warned about uninstalling things in the order listed...FYI.

  • Trouble with internal keyboard and touchpad

    Hi,
    Yesterday I just out of nowhere started having some trouble with my keyboard and touchpad on my MacBook Air.
    The problem displayed itself on various ways. One thing was that I couldn't press regulary with the touchpad. When I was pressing one time, it acted like a pressed with two fingers. When I tried to type in my password on the administrator page, some of the keys didn't work at all and some started to act weird. For example when I was pressing the letter B, the "bar" which displayes where you are in the text (don't know the word in English) went backwards, and when I pressed the letter F it went forward. This seemes so weird and also gives me a hope that it might be some setting failure though B stands for backwards and F stands for forward.
    I could log in to the guestpage where I tried to write in "notes". In notes, no letters at all was working, only numbers. When I tried to shut the computer down from the apple symbol I was asked to write administrator name and password. When I tried to mark the name to write it, there wasn't a "bar" but a cross, but on the other hand did it work to write in the password field. But of course not B and F..
    Usualy I'd just press the on/off botton until the computer lockdown, unfortunately the botton doesn't work. So the only thing I could do was to let the battery die and hope that it would start when I recharged it and pressed start, this didn't go as well as I hoped, so now I'm stuck with a dead macbook air.
    Any ideas of what could be the problem or/and any solutions what might do the trick?
    Extremly greatful for any answers

    Yes you need to use a wired keyboard.

  • Trouble with LaCie disk and time machine

    HI everyone,
    I've been having trouble with using time machine to back-up to my 1 TB LaCie drive (purchased 5/12, unfornuately I was dumb and didn't register the drive and no longer have the box with the serial number and there is no serial number on my drive. The only problem I had up until the end of August was that every so often the LaCie drive (using my FW 800 port) would unmount after waking up from sleep.
    The end of August the drive unmounted for no reason while I was on the computer doing a task. Could not get the LaCie drive remounted (rebooting, etc. etc.) To make a long story short, ended up calling apple care who took me through resetting my SMC and PRAM to no avail. Was booted to higher level of support who walked me through trying to repair my drive using the disk utiltiy. When that didn't work, she walked me through erasing and reformatting the LaCie drive and starting a new time machine back-up. Every thing ok until about ten days ago.
    Last week, when I woke my iMac up from sleep, I got an error saying that the disk was not ejected properly and I could not mount the drive. Restarting did nothing, the disk did not  mount. Shutting down and rebooting seemed to solve the problem and the disk was mounted. Every so often I've had the problem with the disk unmounting after waking up from sleep before. So, I changed my energy sleep preferences. At the end of the day when I am done, I'd unmount the LaCie drive before putting the Mac to sleep using the apple menu.
    Today I came in to start my day, plugged the drive in and it would not mount. Tried rebooting nothing. Went into the disk utility, at first the LaCie drive passed the disk verify (6:26:25 and 6:26:38). Then I went into repair disk on the indented drive at 6:27:13, I wasn't sure what it is was doing, thinking that it had hung, I stopped the repair at 6:27:24. Exited disk utility, and the LaCie drive mounted. But I was getting a read only error when I tried to back-up using time machine. So, I went back into disk utility at 6:27:35, when I verified the disk (indented disk), I got an error saying the disk need to be repaired. After several minutes the disk could not be repaired. So, I erased and reformatted the drive. Ran a time machine back-up and it seemed to back-up everything on my hard drive. Just ran another verify disk and it passed.
    Is the drive failing? Have some other back-ups of my documents, my address book, iCal and am going to make a backup of some of my pref files and important e-mail files and am going to do some more back-ups after I am done.
    Have reached out to the women at apple care whom I talked to last August, but don't expect to hear back from her for at least 24 hours.
    Here is my disk utility log
    2013-11-07 06:26:25 -0500: Verifying partition map for “LaCie”
    2013-11-07 06:26:25 -0500: Starting verification tool:
    2013-11-07 06:26:25 -0500: Checking prerequisites
    2013-11-07 06:26:25 -0500: Checking the partition list
    2013-11-07 06:26:25 -0500: Checking for an EFI system partition
    2013-11-07 06:26:25 -0500: Checking the EFI system partition’s size
    2013-11-07 06:26:25 -0500: Checking the EFI system partition’s file system
    2013-11-07 06:26:25 -0500: Checking all HFS data partition loader spaces
    2013-11-07 06:26:25 -0500: Checking Core Storage Physical Volume partitions
    2013-11-07 06:26:25 -0500: The partition map appears to be OK
    2013-11-07 06:26:25 -0500:
    2013-11-07 06:26:25 -0500:
    2013-11-07 06:26:38 -0500: Verifying partition map for “LaCie”
    2013-11-07 06:26:38 -0500: Starting verification tool:
    2013-11-07 06:26:38 -0500: Checking prerequisites
    2013-11-07 06:26:38 -0500: Checking the partition list
    2013-11-07 06:26:38 -0500: Checking for an EFI system partition
    2013-11-07 06:26:38 -0500: Checking the EFI system partition’s size
    2013-11-07 06:26:38 -0500: Checking the EFI system partition’s file system
    2013-11-07 06:26:38 -0500: Checking all HFS data partition loader spaces
    2013-11-07 06:26:38 -0500: Checking Core Storage Physical Volume partitions
    2013-11-07 06:26:38 -0500: The partition map appears to be OK
    2013-11-07 06:26:38 -0500:
    2013-11-07 06:26:38 -0500:
    2013-11-07 06:27:13 -0500: Disk Utility started.
    2013-11-07 06:27:21 -0500: Verifying and repairing partition map for “LaCie”
    2013-11-07 06:27:21 -0500: Starting repair tool:
    2013-11-07 06:27:21 -0500: Checking prerequisites
    2013-11-07 06:27:21 -0500: Checking the partition list
    2013-11-07 06:27:21 -0500: Checking for an EFI system partition
    2013-11-07 06:27:21 -0500: Checking the EFI system partition’s size
    2013-11-07 06:27:21 -0500: Checking the EFI system partition’s file system
    2013-11-07 06:27:23 -0500: Checking all HFS data partition loader spaces
    2013-11-07 06:27:24 -0500: Reviewing boot support loaders
    2013-11-07 06:27:24 -0500: Checking Core Storage Physical Volume partitions
    2013-11-07 06:27:24 -0500: Updating Windows boot.ini files as required
    2013-11-07 06:27:24 -0500: The partition map appears to be OK
    2013-11-07 06:27:24 -0500:
    2013-11-07 06:27:24 -0500:
    2013-11-07 06:27:35 -0500: Verifying volume “LaCie”
    2013-11-07 06:27:35 -0500: Starting verification tool:
    2013-11-07 06:27:35 -0500: Checking file system2013-11-07 06:27:35 -0500: Error: This disk needs to be repaired. Click Repair Disk.2013-11-07 06:27:35 -0500:
    2013-11-07 06:27:35 -0500: Disk Utility stopped verifying “LaCie”: This disk needs to be repaired. Click Repair Disk.
    2013-11-07 06:28:05 -0500:
    2013-11-07 06:28:13 -0500: Verify and Repair volume “LaCie”
    2013-11-07 06:28:13 -0500: Starting repair tool:
    2013-11-07 06:28:13 -0500: Checking file system2013-11-07 06:28:13 -0500: Volume repair complete.2013-11-07 06:28:13 -0500: Updating boot support partitions for the volume as required.2013-11-07 06:35:05 -0500: Stopped by user
    2013-11-07 06:44:56 -0500: Disk Utility started.
    2013-11-07 06:45:20 -0500: Verifying volume “LaCie”
    2013-11-07 06:45:20 -0500: Starting verification tool:
    2013-11-07 06:45:20 -0500: Checking file system2013-11-07 06:45:20 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 06:45:20 -0500: Checking extents overflow file.
    2013-11-07 06:45:20 -0500: Checking catalog file.
    2013-11-07 06:45:59 -0500: Missing thread record (id = 5057741)
    2013-11-07 06:46:06 -0500: Checking multi-linked files.
    2013-11-07 06:46:19 -0500: Checking catalog hierarchy.
    2013-11-07 06:46:38 -0500: Invalid directory item count
    2013-11-07 06:46:38 -0500: (It should be 0 instead of 4)
    2013-11-07 06:46:38 -0500: Invalid volume directory count
    2013-11-07 06:46:38 -0500: (It should be 166840 instead of 166841)
    2013-11-07 06:46:38 -0500: Checking extended attributes file.
    2013-11-07 06:47:05 -0500: Checking multi-linked directories.
    2013-11-07 06:48:10 -0500: Checking volume bitmap.
    2013-11-07 06:48:12 -0500: Checking volume information.
    2013-11-07 06:48:12 -0500: The volume LaCie was found corrupt and needs to be repaired.
    2013-11-07 06:48:12 -0500: Error: This disk needs to be repaired. Click Repair Disk.2013-11-07 06:48:12 -0500:
    2013-11-07 06:48:12 -0500: Disk Utility stopped verifying “LaCie”: This disk needs to be repaired. Click Repair Disk.
    2013-11-07 06:48:12 -0500:
    2013-11-07 06:50:02 -0500: Verify and Repair volume “LaCie”
    2013-11-07 06:50:02 -0500: Starting repair tool:
    2013-11-07 06:50:02 -0500: Checking file system2013-11-07 06:50:02 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 06:50:02 -0500: Checking extents overflow file.
    2013-11-07 06:50:02 -0500: Checking catalog file.
    2013-11-07 06:50:41 -0500: Missing thread record (id = 5057741)
    2013-11-07 06:50:48 -0500: Checking multi-linked files.
    2013-11-07 06:51:02 -0500: Checking catalog hierarchy.
    2013-11-07 06:51:20 -0500: Invalid directory item count
    2013-11-07 06:51:20 -0500: (It should be 0 instead of 4)
    2013-11-07 06:51:20 -0500: Invalid volume directory count
    2013-11-07 06:51:20 -0500: (It should be 166840 instead of 166841)
    2013-11-07 06:51:20 -0500: Checking extended attributes file.
    2013-11-07 06:51:47 -0500: Checking multi-linked directories.
    2013-11-07 06:52:55 -0500: Checking volume bitmap.
    2013-11-07 06:52:56 -0500: Checking volume information.
    2013-11-07 06:52:56 -0500: Repairing volume.
    2013-11-07 06:52:56 -0500: Missing directory record (id = 5057741)
    2013-11-07 06:52:56 -0500: Look for missing items in lost+found directory.
    2013-11-07 06:53:10 -0500: Rechecking volume.
    2013-11-07 06:53:10 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 06:53:10 -0500: Checking extents overflow file.
    2013-11-07 06:53:10 -0500: Checking catalog file.
    2013-11-07 06:53:16 -0500: Incorrect number of thread records
    2013-11-07 06:53:22 -0500: Checking multi-linked files.
    2013-11-07 06:53:35 -0500: Checking catalog hierarchy.
    2013-11-07 06:53:53 -0500: Invalid directory item count
    2013-11-07 06:53:54 -0500: (It should be 5 instead of 6)
    2013-11-07 06:53:54 -0500: Invalid volume directory count
    2013-11-07 06:53:54 -0500: (It should be 166844 instead of 166842)
    2013-11-07 06:53:54 -0500: Invalid volume file count
    2013-11-07 06:53:54 -0500: (It should be 1056326 instead of 1056321)
    2013-11-07 06:53:54 -0500: Checking extended attributes file.
    2013-11-07 06:54:20 -0500: Checking multi-linked directories.
    2013-11-07 06:55:25 -0500: Checking volume bitmap.
    2013-11-07 06:55:26 -0500: Checking volume information.
    2013-11-07 06:55:26 -0500: Repairing volume.
    2013-11-07 06:58:06 -0500: Rechecking volume.
    2013-11-07 06:58:06 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 06:58:06 -0500: Checking extents overflow file.
    2013-11-07 06:58:07 -0500: Checking catalog file.
    2013-11-07 06:58:12 -0500: Incorrect number of thread records
    2013-11-07 06:58:18 -0500: Checking multi-linked files.
    2013-11-07 06:58:31 -0500: Checking catalog hierarchy.
    2013-11-07 06:58:50 -0500: Invalid volume directory count
    2013-11-07 06:58:50 -0500: (It should be 166844 instead of 166842)
    2013-11-07 06:58:50 -0500: Invalid volume file count
    2013-11-07 06:58:50 -0500: (It should be 1056326 instead of 1056321)
    2013-11-07 06:58:50 -0500: Checking extended attributes file.
    2013-11-07 06:59:17 -0500: Checking multi-linked directories.
    2013-11-07 07:00:22 -0500: Checking volume bitmap.
    2013-11-07 07:00:24 -0500: Checking volume information.
    2013-11-07 07:00:24 -0500: Repairing volume.
    2013-11-07 07:03:03 -0500: Rechecking volume.
    2013-11-07 07:03:03 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 07:03:03 -0500: Checking extents overflow file.
    2013-11-07 07:03:04 -0500: Checking catalog file.
    2013-11-07 07:03:09 -0500: Incorrect number of thread records
    2013-11-07 07:03:15 -0500: Checking multi-linked files.
    2013-11-07 07:03:29 -0500: Checking catalog hierarchy.
    2013-11-07 07:03:47 -0500: Invalid volume directory count
    2013-11-07 07:03:47 -0500: (It should be 166844 instead of 166842)
    2013-11-07 07:03:47 -0500: Invalid volume file count
    2013-11-07 07:03:47 -0500: (It should be 1056326 instead of 1056321)
    2013-11-07 07:03:47 -0500: Checking extended attributes file.
    2013-11-07 07:04:14 -0500: Checking multi-linked directories.
    2013-11-07 07:05:19 -0500: Checking volume bitmap.
    2013-11-07 07:05:20 -0500: Checking volume information.
    2013-11-07 07:05:20 -0500: The volume LaCie could not be repaired after 3 attempts.
    2013-11-07 07:05:21 -0500: Volume repair complete.2013-11-07 07:05:21 -0500: Updating boot support partitions for the volume as required.2013-11-07 07:05:21 -0500: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.2013-11-07 07:05:21 -0500:
    2013-11-07 07:05:21 -0500: Disk Utility stopped repairing “LaCie”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    2013-11-07 07:05:21 -0500:
    2013-11-07 07:09:45 -0500: Disk Utility started.
    2013-11-07 07:11:45 -0500: Preparing to erase : “LaCie”
    2013-11-07 07:11:45 -0500:     Partition Scheme: GUID Partition Table
    2013-11-07 07:11:45 -0500:     1 volume will be erased
    2013-11-07 07:11:45 -0500:         Name        : “LaCie”
    2013-11-07 07:11:45 -0500:         Size        : 999.86 GB
    2013-11-07 07:11:45 -0500:         File system    : Mac OS Extended (Journaled)
    2013-11-07 07:11:45 -0500: Unmounting disk
    2013-11-07 07:11:45 -0500: Erasing
    2013-11-07 07:11:54 -0500: Initialized /dev/rdisk1s2 as a 931 GB HFS Plus volume with a 81920k journal
    2013-11-07 07:11:54 -0500: Mounting disk
    2013-11-07 07:11:54 -0500: Erase complete.
    2013-11-07 07:11:54 -0500:
    2013-11-07 10:38:00 -0500: Disk Utility started.
    2013-11-07 10:38:12 -0500: Verifying volume “LaCie”
    2013-11-07 10:38:12 -0500: Starting verification tool:
    2013-11-07 10:38:14 -0500: Checking file system2013-11-07 10:38:14 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 10:38:14 -0500: Checking extents overflow file.
    2013-11-07 10:38:14 -0500: Checking catalog file.
    2013-11-07 10:38:29 -0500: Checking multi-linked files.
    2013-11-07 10:38:29 -0500: Checking catalog hierarchy.
    2013-11-07 10:38:41 -0500: Checking extended attributes file.
    2013-11-07 10:39:04 -0500: Checking multi-linked directories.
    2013-11-07 10:39:31 -0500: Checking volume bitmap.
    2013-11-07 10:39:32 -0500: Checking volume information.
    2013-11-07 10:39:32 -0500: The volume LaCie appears to be OK.
    2013-11-07 10:39:32 -0500: Repair tool completed:
    2013-11-07 10:39:32 -0500:
    2013-11-07 10:39:32 -0500:

    I just got a call back from the upper level support person at apple care who had been advising me on my trouble with time machine and my LaCie 1 TB FWD. I had sent her much of the same verbiage as I posted here. As some of you have probably figured out, the verdict is that the drive is probably failing. She says this because I have had to do two erase and reformats. She thought that the intermitant problem that I have had with the drive unmounting when my iMac wakes from sleep could be related to the drive failing.
    In the meantime I have a secondary back-up (not using time machine) and the LaCie  1 TB FWD is working for the moment.
    Thanks to all who read all my verbiage.
    And in the meantime, I've learned something. I marked this question as solved. But I'm open to other things to try.
    Message was edited by: njtreehugger minor edits and update

  • TS3999 Help! Trouble with my calendar and icloud.

    I am having trouble with my calendar and icloud.
    Customers send me meeting invites and I can accept them no problem. But if they subsequently change the date or time I get an error message:
    Access to “appointment name” in “Home” in account “iCloud” is not permitted.
    The server responded:
    “403”
    to operation CalDAVWriteEntityQueueableOperation
    sometimes the time changes in my calendar, sometimes it doesn't, and my customers keep getting messages back from icloud 'accepting' the original date, not the changed date!!
    It is driving me an my clients crazy!  any help would be appreciated.

    I had a problem specific to the Calendar on web-based Firefox (PC) Was asked for a separate sign-in I'd never seen before which didn't work. I resolved this by signing out, signing in again.

  • Which H.264 settings for Blu ray with mixed assets

    Hi,
    I am still learning with the different options that I can chose in Encore for transcoding an asset but I am not sure what to chose.
    I created a project in PP which uses the following formats 1080i/25,1080i/50, 720p/23,976 and 1080p/25.
    the main scenes in PP is in 1080i/25. Most clips are documenting sports or moving objects.
    If I use the automatic transcoding setting in Encore, it will be transcoded in 1080i/25 but is this really good? Although I am in a PAL region I think, for Blu Ray, I could also use NTSC settings like 1080p/25.
    What shall I do?
    Thanks

    Hi,
    I am still learning with the different options that I can chose in Encore for transcoding an asset but I am not sure what to chose.
    I created a project in PP which uses the following formats 1080i/25,1080i/50, 720p/23,976 and 1080p/25.
    the main scenes in PP is in 1080i/25. Most clips are documenting sports or moving objects.
    If I use the automatic transcoding setting in Encore, it will be transcoded in 1080i/25 but is this really good? Although I am in a PAL region I think, for Blu Ray, I could also use NTSC settings like 1080p/25.
    What shall I do?
    Thanks

Maybe you are looking for