Trouble with Frame Size of AE Composition in Premiere CS6

I'm trying to add a name-bar (name-tag) from After Effects to my sequence in Premiere Pro. I built the name-tag in Illustrator according to the frame size in Premiere.
All of my name tags for a 640x480 frame fit perfectly. However, the tags I built for a 720x480 frame appear way, way too large. I can't figure out why. Below is an example of the issue I've been having:
As you can see, the bar on the bottom extends beyond the frame -- but I built it to be the same 720x480 frame size as the video clip.
So, without further adieu...help me. Please.

Alright, (sorry for the delayed response) here are the settings for the AE composition:
And there Sequence Settings:
And the video properties (2 images):
I hope this helps you help me.

Similar Messages

Trouble with image sizes....

I have a freelance job where I am creating a few simple animations for a digital menu board for a Dairy Queen. I am having trouble with the size of my stage translating to the proper size on the LCD monitor. Is there a trick for making the conversion? The stage is huge and in writing is way bigger but still comes up smaller when viewed on the monitor. The monitor we are using is 768 x 1366 (or 15.5” x 27.5”) and my stage is 5100px x 7688px ( or 70"x106"). So you would think the flash file would be huge but it is too small by about 4in?!?!
--Matt--

those aspect ratios are different. to fill the screen, you will need to make a descision to leave space at the top/bottom, crop your stage width or distort your stage.
you can publish for 100%x100% and use the scaleMode property of the stage to select your option.

Trouble with image size

Hello everyone, I'm having some trouble with image sizes.
I created a 977x5000 px image at 72 PX/inch resolution with text for use on a weebly website.
When created the image looks like a small vertical bar(maybe around 50x500px) with a massive left and right photoshop background(not the image background). so if I drag the bottom slider to the left or right the image will completely disappear. I can CTR and + to get it to the correct size so I can actually read the text. I can still go very far left and right with bottom slider. The problem comes in when I save it to a PNG or other file it still shows up as a bar.
Is there any way to fix this so it saves it as the correct viewing size? that way when I open the image it's an actual 977x5000 instead of looking like a 50x500
I'm on Windows 7, my display settings are at 100% and I'm using Photoshop CC 2014

You do not understand what is going on at all. First an image file's PX/inch resolution setting is meaningless when it come to the Web and displays all that is meaningful is pixels. For displays are run at one resolution usually their native manufactured Pixel resolution so your image will be displayed at 96DPI on Desktop Displays and a 300+DPI on Phones and around 250DPI on tablets. Your image height is also to large to fit on any display. The Display I think that displays the most pixels is the IBM T221 22.2" LCD 16:10 aspect ratio 3840px by 2400px. at 204DPI. Rotating that display to portrait it can display an image with a height of 3840px your image height is larger 5000. Your image has an aspect ratio in the neighborhood of 1:5 an image 50x500 has an aspect ratio of 1:10 a far cry from 1:5 your image is much wider then 1:10.
IBM T220/T221 LCD monitors - Wikipedia, the free encyclopedia
Most common display resolutions in the first half of 2014
Acronym
Aspect ratio
Width (px)
Height (px)
% of Steam users
% of web users
SVGA
4:3
800
600
00.08
00.64
WSVGA
~17:10
1024
600
00.17
01.59
XGA
4:3
1024
768
02.85
09.84
XGA+
4:3
1152
864
00.34
00.85
WXGA
16:9
1280
720
00.93
01.65
WXGA
5:3
1280
768
00.52
01.09
WXGA
16:10
1280
800
02.44
08.90
SXGA– (UVGA)
4:3
1280
960
00.35
00.48
SXGA
5:4
1280
1024
07.05
05.74
HD
~16:9
1360
768
03.00
02.43
HD
~16:9
1366
768
24.53
26.64
SXGA+
4:3
1400
1050
00.10
n/a
WXGA+
16:10
1440
900
05.74
05.95
HD+
16:9
1600
900
07.76
04.99
UXGA
4:3
1600
1200
00.30
n/a
WSXGA+
16:10
1680
1050
06.27
02.96
FHD
16:9
1920
1080
32.91
08.64
WUXGA
16:10
1920
1200
02.11
00.95
QWXGA
16:9
2048
1152
00.08
n/a
WQHD
16:9
2560
1440
00.93
00.58
WQXGA
16:10
2560
1600
00.13
n/a
3:4
768
1024
n/a
05.31
16:9
1093
614
n/a
00.64
16:9
1536
864
n/a
00.70
Other
01.41
09.42

Trouble with Border Size when Printing

I am having a great deal of difficulty with border size using PSE 9 and an Epson R800. I have the latest driver for Windows 7, and still all of my photos come out with a .25" border (or greater if border is checked in the Adobe settings as well) when "borderless" is left unchecked. I have tried all possible permutations of borderless with an added border, changing print size to trick the program, but cannot get the 3mm (.125") border I am accustomed to. Can anyone figure out what I am doing wrong? Is a quarter of an inch on a 4x6 print the standard border?
Thanks in advance
Gregg

You must have been using iPhoto 6 the last time as that's not available any more. There are themes now with different border options but no continuously adjustable border width.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Trouble with ipa size after changing assets

Experiencing some really really odd issues with file size.
Cooked a development version of our app yesterday, and the IPA file came out to 596Mb. We deemed this WAY too big to be useful, so we took every image and downsized it to 72 DPI at the exact pixel dimensions and compressed with jpg as small as we could get them.
Next build of the app today, and the IPA file comes out to 822Mb...
how is this even possible!?
We reduced the file size of all our assets by almost 90% and the file size of the app INCREASES!?
[edited]
Anyone have any insight on why DPS seems to be defying all logic?

Thanks very much Neil. Much appreciated.
I am unfortunately out of the office for the night, so I can't get access to the files or DPS, but I will share the folio first thing in the AM.
In the meantime though my team and I started doing some testing, as we were really concerned that the imagery in our app was what was causing the issues.
As I mentioned earlier, we had swapped much of the imagery in our app for .jpgs that are rendered at the correct pixel dimensions they appear at in the app.
We tried quickly swapping out a few of the higher res, and larger file size images for these smaller, compressed .jpgs After running the folio through DPS it seemed to impact file size very little (only dropped the file size a couple of hundred kb) - I am guessing this is due to what you were saying about DPS automatically resizing most images to 108ppi etc.
Dropping to a single orientation definitely had a major impact on the file size. (822Mb for dual vs. 540Mb for single)
Unfortunately the dual orientation is something we have been locked in to by our client.
for this particular app the client is very picky about the image quality and they have made it a requirement that the app support retina display.
Our initial tests running a 1024x768 file and upscaling on the newer iPad didn't have the best results, as the image compression and upscaling left our pixel imagery looking less than optimal.
I finally managed to find this: http://blogs.adobe.com/digitalpublishing/files/2012/03/DPS_iPad3_bestpractice.pdf
This PDF has a section on file size, and describes using a 1024x768 with images at 144ppi folio for both retina and non-retina display
Would starting with a 1024x768 file and then building a retina folio with those files drop our file size?? or would DPS scale the images up for retina and then result in a similar file size?

Portal application not displaying correctly with frame size 125% in IE

Dear Expert,
We are facing issue in Portal (7.0) like, when I open the application "Products Coatings" in myWorkspace with Internet Explorer
display size 100% the frame "xyz" is displayed correctly:But When I open the application "Product Coatings" in myWorkspace with Internet Explorer display size 125% the same frame is NOT displayed correctly.
Someone can help me in closing this issue..
Thanks,
kundan

Hi,
How are you opening your portal application? Is it through iViews? Where are you setting the property as 125%?
Thanks,
Mahendran B.

Trouble with header size....

Hey,
I am having trouble getting rid of a gap at the top of my header/banner
The attached picture shows what i am talking about: if you look above the photo on the left, you will see a black gap that i cannot get rid of.   I want the picture to go all the way to the top of the page
How do i do this?
sorry for the simple question, but i just can't work it out

You have h2 tags (head text size 2) around the image at the top of the page.
   <h2><img src="logo%20black.jpg" alt="ken logo" width="1000" height="200">
      
</h2>
They are adding an extra 18px drop above the image. Header tags are block tags, which means (partly) that they come with extra space (margin) above and below). Taking the h2 tags off moves the image back up. Then you can go to the css and make the header div 200px tall (the height of the photo) instead of 218px, and the whole thing will tighten up.
.twoColLiqLtHdr #header {
    font-family: "MS Serif", "New York", serif;
    background-color: #000;
    background-position: 0px;
    height: 200px;
    position: relative;
    padding-top: 0px;
    padding-right: 0px;
    padding-bottom: 0px;
    padding-left: 0px;
    margin-top: 0px;
    margin-right: 0px;
    margin-bottom: 0px;
    margin-left: 0px;
    border: medium double #300;
Beth

Trouble with auto size text in a single line form field

Hi. I'm having an issue with filling out a form in Adobe Reader on my iPad. The text field is single line. The font is set to "auto" so that the line of text will not exceed a certain width. When filling out this form on my laptop using Adobe Reader, it works fine. As I type additional text, once the field is filled, it shrinks the text font size. On my iPad, however, it won't let me type any more text in the field once I reach the end. Does Adobe Reader for iPad not support the "auto" font size in form fields? And I did check that my version of Adobe Reader is up to date on my iPad, so I do have the latest version.
Thanks in advance for your help,
Ashley

Actually, nevermind. It must be something wrong with the file. I tried opening another file and auto resize worked perfectly on it. Weird though that it works on one file and not another.
Thanks!
Ashley

Having trouble with image size on new HP2311x display with 4 year old MacBook. Image too small. Do I have to stay in mirror mode? I have messed with OSD and Image Control menus on display and have gotten nowhere. Help?

Have just installed new HP 2311x display withe 4 year old MacBook. VGA cable. In mirror mode, at high resolution of 1920x1080, image size on HP display is too small. How can I get it to fill screen? If not in mirror mode, the display looks good, only I can't get the top menu bar (tried to drag it) nor the rest of the desktop. Help?

Have just installed new HP 2311x display withe 4 year old MacBook. VGA cable. In mirror mode, at high resolution of 1920x1080, image size on HP display is too small. How can I get it to fill screen? If not in mirror mode, the display looks good, only I can't get the top menu bar (tried to drag it) nor the rest of the desktop. Help?

Trouble with custom sizes

I just got an Epson 3800 and am trying to set up a custom size. I have used Aperture for several years and never used this function (used Photoshop instead). The problem is in the printing. I entered my custom size, everything looked right in the thumbnail on the print page but it doesn't print properly. Twice the photo paper came through with nothing on it (even thought the printer said "Printing") and now most recently only a portion of the picture is printed in one corner.
Any ideas?
Thanks, John

It could be an orientation issue - in other words the length vs. width is screwed up. Maybe not - I have gone through some serious pain getting all of my software working correctly with 4880 printers in the past.
RB

Trouble with DVI to S-Video/Composite on 480i TV

Please help. Just connected my 480i TV with my 2008 mac mini. First connection worked perfectly. I changed the screen resolution and now all I have is a flickering black & white tv. I've tried almost every possible screen resolution with no luck.
Help?

I can explain the behavior with AirDisplay. OS X has the ability to store different display settings according to how many screens are in use. AirDisplay counts as two screens being in use, same as like attaching an external display to a laptop. So OS X is using different settings for that configuration. As soon as the second display goes away, OS X reverts to settings last in use for the single display configuration.
Maybe restarting in Safe mode and changing the resolution to 480i will be all you need to do. That is also covered in the link the was previously sent.

Trouble with JFrame Sizes, background always seem to be exposed

I must be misunderstanding how this pack() and setPreferredSize() thing works. Basically I have a JPanel, which I draw a blue background in. I set it up so that it is a gridLayout.
super(new GridLayout(GRID_ROWS, GRID_COLS, GRID_SPACE, GRID_SPACE));
setPreferredSize(new Dimension(GRID_COLS * CELL_SIZE,GRID_ROWS * CELL_SIZE));to me this means I have a gridlayout of squares.
then I add JLabel "blocks" to this gridlayout, so that it will look like a maze. I set the preferred size of the JLabels to CELL_SIZE. So I would think everything would fit nicely. Then I insert this JPanel onto a JFrame. I also add another JPanel (ButtonPanel) to the bottom of the JFrame, and this seems to screw everything up.
First off, am I doing this setPreferredSize() stuff right. I was under the impression that I should set the preferredSize() of all the subcomponents, and then on the larger component, one that I really don't have a preferredSize() for, I just pack() it, and that will shape around the limitation of the subcomponents.
Secondly why doesn't this ButtonPanel just scale to the size of the maze? Why does it have to stretch it out, so that my, once square looking JLable blocks, look like rectangles? Is there a way short of setting the PreferredSize(some_number_of_pixels), that is more elegant that will make the ButtonPanel behave?

No takers? really any ideas about why this might be please let me know. I have a feeling it is a somewhat simple concept, but I'm just missing the point or something.

Trouble with Frames, Menu

Hi! I need some help. I am currently designing a webpage in
Dreamweaver MX. I am using a frameset, one of the frames is going
down the right of my page. I made a pop up menu in fireworks to put
in this frame. I inserted the menu's HTML and it looks fine, except
the menu pops out but it will only stay in that frame, so it gets
cut off. Also, whenever I click on one of the links in my menu, it
opens the new page in that tiny little frame that is made only for
the menu. Here is the code for my frame that contains the
menu.

Hi! I need some help. I am currently designing a webpage in
Dreamweaver MX. I am using a frameset, one of the frames is going
down the right of my page. I made a pop up menu in fireworks to put
in this frame. I inserted the menu's HTML and it looks fine, except
the menu pops out but it will only stay in that frame, so it gets
cut off. Also, whenever I click on one of the links in my menu, it
opens the new page in that tiny little frame that is made only for
the menu. Here is the code for my frame that contains the
menu.

Trouble with DV Type 2 AVI audio in Premiere Elements 11

Please see the two screen captures below. G-Spot says my clip is DV Type 2 AVI which Premiere Elements 11 supposedly handles well. G-Spot says both the appropriate audio and video codecs are available on my Windows 7 x64 PC. Main Concept DV codec is installed. The camera was a Sony Handycam vintage 2000 and the clip captured by Firewire.
When I load the clip into Elements 11, the audio is compressed in length relative to the video. I get about 11 seconds of high pitched warbling and then no sound for the balance of my 67 second clip. You can see the audio profile flatten after 11 seconds in the Timeline view. I do notice that the audio preset for Elements is 48000 sample rate, and my clip is at 44100. If this is an issue I do not know how to fix it in Elements.
The clip plays fine, audio and video properly synced, in Windows Media Player and AVS Video Creator.
I am able to use AVS Video Creator to strip the audio from the clip, output it as a .wav file, and use it to replace the audio track in Elements. However, I have hundreds of clips to edit; this method will cause substantial brain damage.
Is there something I can do to get Premiere Elements 11 to process the audio properly?

Harmon,
Great news!
Not sure why that other app. would Encode the Audio to MP3, as that is non-standard (though MP3 is a fairly common format/CODEC - just not in a DV-AVI).
Sorry to hear that you have that extra step, with those particular DV-AVI's, but at least you do have a workaround for them.
Not sure if you will be outputting to DV-AVI, but if you do, the Audio choice would be that of the DV-AVI files that do work - PCM/WAV @ 48KHz 16-bit. That will create files, that are about as "plain vanilla," as it gets with PrE.
Good luck and happy editing,
Hunt

Is anyone else having trouble with Audio Assets not packaging correctly? Indd CS6

When I go to package my indesign files, which appear properly linked and organized, rather than bundling the play and pause icons in one folder labeled Audio (in an Overlay Assets folder) like it should, it collects as two Audio folders (both into an Overlay Assets folder). I do have two audio resources I'm using (the same mp3 file for each audio button). When I collect, I see one folder is named Audio and has nothing in it. Nor does the 2nd folder, named Audio 402-12510241 but with a long 12 digit code in the filename (this number changes each time I attempt to bundle.). So each time I try to package, then open the newly packaged file, the audio controller files show up as missing assets.
Here's two alert messages I get when I:
A. Try to package a file
B. Try to preview on iPad
If I manually dump these collected audio folders and replace into the Overlay Assets folder it works to preview on the iPad. And seems to work. But try repackaging and you get the same scenario.
Any ideas how to resolve this?
—Brian

Well it worked, kind of. Opened and worked in CC. Previewed to iPad just fine. Packaged folder on the CC machine, which seemed to create correct overlay asset folders with the audio plan and pause pngs. Yeah.
Then, I followed the steps from your note, copied the whole folder to the cs6 machine. Opened the idml in that folder, where there was also the CC version, saved the idml as a new filename in cs6. And if I stop right there, I likely have good files.
But for good measure, I tried to package again, hoping this time I'd see the audio folders in the right place. But no dice. The packaged file creates two empty audio folders. The reason I keep trying to re-package is because I'll be adding more content to these files and will have to re-package at least one more time before uploaded article into an actual folio. And I want to address the problem before going to the Cloud. I'm a bit hesitant to upload given the behavior of these audio files. I've tried importing new audio files with new controller files but that doesn't work.
Days ago, doing troubleshooting of the file, I noticed an old remnant which I deleted from the CC file, and that was a plain text box (with 100% color fill) that had an audio controller file path/location (in the audio folio overlay panel) that linked backed to the CC machine. This was an accident to link this colored box, and it had no mp4 link (or audio controller files) attached to it in the links folder. But deleting the box did delete this audio pathway.
So I can keep doing what I'm doing, replacing the Overlay Assets folder with a custom Audio folder each time, but I'll have to do this to my other 700 pages of iPad documents that will follow this chapter. I'd rather just understand what is happening, fix the file once, then move on and use the corrected files for a template to use for other 20 chapters i have to build.
Mac OS 10.7.5 (which keeps telling me there is an CS6 update but then after updating it, the same update is ready for me to download again). So maybe my OS has something to do with it? Or working on two separate harrdrives that are both within the same tower? I'm trying to work on just one, but I have copied files onto this 2nd drive, which I plan to add as new articles to a new folio as soon as I figure this out.
What do you think?

Trouble with Frame Size of AE Composition in Premiere CS6

Similar Messages

Maybe you are looking for