Trouble with home share audio using ATV2 and Yamaha RX-V475 AV receiver
When I home share play a movie the audio isn't available. To get the audio I must hold down the ATV2 remote and change the speaker setting to the AV receiver. This has the effect of putting the receiver into Airplay input mode and I loose the video. If I reselect the correct input (HDMI channel) on the receiver for the ATV2 connection I get the audio back with the video. Any ideas?
You're going to have to free up that optical input.
Similar Messages
-
I'm having trouble accessing my itunes Library from my AppleTV using home sharing. The appleTV can see my computer, and even updates when I change the Library name, but gives me an error message when I try to access the library. Any thoughts?
Hi,
I am having the same issue as joefromCSH.
I have ensured I have the software up to date on all machines, re-installed iTunes, restored the iTV2, turned off sharing on all machines and re-activated and all to no avail!
I can, for example play a movie (or music) on my iMac's iTunes and select to play it on the iTV2 - this works fine. But when I select my library on the iTV2 I get the error messsage and nothing else.
The turning sharing on/off thing doesn't change the issue.
Other internet features of the Apple TV2 work fine.
Help! -
Trouble with screen resolution when using Parallels and ACT on Macbook Pro (late 2013)
Hello, I have installed my Sage ACT 2013 software on my Macbook Pro 13" Retina (late 2013) computer that has 16GB of RAM and an i7 core processor using Parallels 9 desktop and Windows 7- 64bit. The problem is that the screen resolution is very small and condensed to the left side making reading the title boxes and content very difficult. I reached out to Parallels who was unable to resolve the screen resolution by either adjusting the display settings or the Windows 7 video settings. Right now they have the Resolution listed as "Scaled" as the "Best for Retina" & "More Space" options did not help the issue. What is even more strange is that I have Office 2013 installed on the Parallels side so that it can interface with ACT and those screen resolutions read just fine. Are there any ACT/MAC users out there that might have any insight for me? Thx!
See -> http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf.
In addition to the Windows disc (or USB flash drive with the Windows installer) you'll need a 8GB+ flash drive.
The referenced manual - on page 3, I think, gives you a run-down of what you'll need before you begin the installation. You may also want to post any further Boot Camp questions in the Boot Camp forum -> https://discussions.apple.com/community/windows_software/boot_camp.
Good luck,
Clinton -
I am having trouble with home sharing 11.0.1, i am having trouble with home sharing 11.0.1
i am having trouble with home sharing 11.0.1 and setting it up with apple tv and i pad
Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Troubleshooting Security Software -
Sorry for the silly question.
I have never used the home share.
On my mac mini is a drobo with the main library on.
Back on my imac I have just imported a CD.
I can see the minis home share so select it and my music from the drobo appears, but I was under the impression I would be allowed to copy over the cd I imported on the iMac?
there does not appear to be a way to do that?
CheersGary i wrote:
Sorry for the silly question.
I have never used the home share.
On my mac mini is a drobo with the main library on.
Back on my imac I have just imported a CD.
I can see the minis home share so select it and my music from the drobo appears, but I was under the impression I would be allowed to copy over the cd I imported on the iMac?
hi Gary,
sorry if i ask the obvious but is iTunes on both machines authorized to the same iTunes account ?
these reads may be helpful: one and two.
happy computing ... -
Started having trouble with iTunes so I uninstalled everything and tried to reinstall but it says ' iTunes cannot run because some of its required files are missing. Please reinstall iTunes.' Well, I've uninstalled and reinstalled 5 times. Now what?
I figured it out. A week ago I had downloaded a screensaver from a website I trusted and that's when my problems started. I uninstalled it but that didn't help. So, I reinstalled it then used an uninstall softtware app that cleanns more than the control panel does. Then I used a computer cleaner to be sure everything was wiped clean. And it worked. I downloded iTunes for the 7th time in 2 days and finally it worked! And I lost nothing from my account.
Maybe this info will help others. -
I am having trouble with a lot of pop ups and causing websites and screens to roll slowly, firewall is on, how do i prevent this
You installed adware along with something else.
You can either follow Apple's manual instructions for removing it, or use the free automated tool, AdwareMedic. -
I am having trouble with comcast e mail using safari
I am having trouble with xfinity e mail using browser, SAFARI
I too had this issue. I was recently an employee and user of Comcast and they do not support Safari. Some functions work, many don't. I used Firefox and had no issues. I also set up my mail using MAC MAIL and didn't have any issues with that.
-
How can I home share between a wired and a wireless computer
how can I home share between a wired and a wireless computer? I have no problem linking wireless devices, but cannot set up homeshare with a wired PC.
Maybe you want to describe exactly what you have and what you want to do.
-
With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.
Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.
-
Why am I having so much trouble with my iPad air 2 reading and remembering my fingerprints?
Why am I having so much trouble with my iPad air 2 reading and remembering my fingerprints? Even if I enter the same finger 5 times, it only works once or twice.
Try this -> http://m.facebook.com
which is the mobile optimized page of FaceBook. -
I am having trouble with my iphone, I updated it and when I turned on the screen the ituns and USB icon appear. I've tried to restore it but it sends me to the ituns icon right away and I dont know what to do.
you may have to do these stepps a few times http://support.apple.com/kb/HT1808
-
I updated my software to iOS6 and now my phone won't automatically join known wifi networks even though I have it on. It goes back to 3G every so often when I'm at home instead of using wifi, and each time I ask to join it asks for my wifi password
Try this for your home Wi-Fi:
On your iPhone, Settings > Wi-Fi > select your home network > "forget this network"
Power down (unplug) your wireless router
Restart your iPhone
Plug in your router
Re-join that network
I don't know if this simple technique will fix it for good but try it. There is a long thread about this problem here: iOS 6 WiFi Disabled -
I have turned home share on my iPhone and my Apple TV and the remote app doesn't work all of the sudden. How can I fix this?
Welcome to the Apple Community.
Have you updated to the latest version of the Remote App. -
My iPhone 5 its running IOS6.4 and just work with wifi, when I use 3G I can't send or receive any data
Try resetting all network settings, or turn the airplane mode on then off, or restarting the device itself
if all else fails, do a restore (Back-up everything before doing this)
if it still fails, contact apple or your wireless carrier.
Maybe you are looking for
-
Does the LG 300 W Smart Sound Bar support my iPod nano?
Does the LG 300 W Smart Sound Bar support iPod nano?
-
Oracle VM Server for SPARC Management Platforms
Upon doing some nominal research, I see that the Oracle VM for x86 platform is significantly more robust (at least at first glance) with regards to migrations/interface/etc. Where is the equivalent of Oracle VM Manager for SPARC? Is the Oracle Enterp
-
Hello I can connect to a Oracle 10g release 2 server using instant client. I can execute a select query without any problems, but when I try to update a table, my program crashes. For example, SELECT * FROM table WHERE col1 = 'value'; works fine. UPD
-
Dashboard Info Button not working
Hi guys! I can see all the widgets on my dashboard, but all their 'i' button can't work. I have tried repairing permissions and deleting the preference files, but it still can't work. Had restart the laptop multiple times. Hope somebody will be able
-
I am unable to access app's such as pages, facebook amongst others, any ideads, it loads but shuts straight down before bringing up anything?