Trouble with html on copyright page

I was wondering if anyone had the time to take a look at the source code on my copyright page. I have been using this page for years, and adjusting it when the need arises. I recently made some changes and, when I generate the project in RH6, I get an error message saying a Runtime Error has occurred.
I've played with the code all day today, to no avail. Perhaps I should call support? I'm not sure how to proceed. . .
Regards,
Sharon

I'm going to answer this to the best of my abilities.
First of all, I did import the source file, not the output file, into another project, though I repeated that exercise again to be sure that is what I had in fact done. With that clarified, I proceeded to take out the text as recommended by Willam. I did begin to realize that all my source files have this code.
After generating, I viewed the output files in both Firefox and IE6. In Firefox, I had no problems; In IE, the error remained. I decided to debug in IE, and (not being a programmer), I can only surmise that my results were that something was wrong with IE! I upgraded to IE8, and all went swimmingly from then on.
If someone can explain this more clearly, that would be terrific. . .in the meantime, thank you all for your help, as always.
Have a wonderful weekend.
Regards,
Sharon

Similar Messages

Having trouble with custom web auth page on 4404

Hi all
I am having trouble with a custom web auth page on my controller, we have edited the original file, but when we click login it goes to page cannot be displayed and it doesnt redirect to the page I want, however when I close the window and reopen it has already authenticated me.
Has anyone got a copy of some working html code I can use ?
cheers

There is sample Web Authentication bundle avaiable for download from cisco.com. if you go to the software download page and go to Wireless->Standalone Controllers->4404 you should see a link for Wireless Lan Web Authentication Bundle.
Its the same bundle whether you have a WiSM, 4404 or 2100

CS5 trouble with updating main template & pages

Sorry I'm new at this & didn't realize I needed a full title in the subject area. I 'put', I test & it all looks good. But when I go on line the changes didn't work in the main template in the navigation & the side bar ads & promoos don't change on all the pages - again - even tho' when I test in Firefox & Explorer they do show up updated.

I SENT YOU A SNIPE PHOTO OF THE TEMPLATE SHOWING ONE OF THESE FILES ON THE MAIN TEMPLATE
THIS WAS ORIGINAL LINK:
•Access a cached copy of www.kosherwoman.com/Menu_Items/Health/TIPS/prevention/preventDentalProblems.html
IT WAS CHANGED TO:
../Menu_Items/Health/DENTAL/dentalCare.html
On some pages, you get the correction & on others you get the old link with the line that it doesn't work
THIS WAS ORIGINAL LINK:
•Access a cached copy of www.kosherwoman.com/Menu_Items/Kitchen/foodContamination/preventingFoodContaminat ion.html
IT WAS CHANGED TO: .../Menu_Items/Kitchen/CONTAMINATION/preventingFoodContamination.html
Ruth Goldman
Kosher Woman Administrator
E-mail: [email protected]

I'm having trouble with auto-correct in Pages

I am having trouble with auto-correct spelling in Pages. I have read a past discussion of this in which I believe the last comment was made in 2012. (I have the latest Macbook Pro purchased Dec 2012 and it is totally updated.) The problem is just with one word, as far as I can tell. It seems that perhaps the older problem of contractions has been resolved except for one word: "hasn't". Auto correct insists that it should be "hans't". I follwed the suggestions offered in the previous discussion about using SYMBOL AND TEXT SUBSTITUTION to correct the word but it hasn't worked. Do I just have to live with this? Surely there is a way to fix this problem? I really like using the auto-correction and would hate to have to stop using it just for one word. Thanks in advance for your help.

It should work if you have a Symbol and Text Substitution set for hans't → hasn't. Are you sure you have this substitution checked, or Symbol and Text Substitution checked overall?

Trouble with search results landing page

Hello. I am having problems with my search results page linking correctly. I get the error that the page can not be found.
http://highestgood03.businesscatalyst.com/_blog/Highest_Good
What am I doing wrong? Any help will be appreciated. Thanks!

Perfect! Thanks for your help.
I have another question. Right now for my search results I have {tag_image} inserted. It is currently rendering a picture of a pencil.
How do I change the image? Is it possible to have a unique image for each blog posts? Thanks!

PSE9 - having trouble with "html email sender verification" page

We have just purchased the PSE9. This is our first venture into a photoshop program. We are wanting to send some of our pictures to friends via email. Just after we push the "share" button, to create an attachment for the email, we get this page "html email sender verification." It contains in the first blank, our email address (given), a button "resend email", and a blank entitled " Sender verification." Below this box are the words:
"If this email address is not correct, or you would like to use a different e mail client, you can change your email settings by clicking Cancel and then choosing
Edit ->Preferences->sharing."
At the bottom right are two buttons, "OK" and "Cancel"
When we put in our email address into the "Sender verification" box, and press "OK" the next window is entitled "HTML Email Sender Verification" . The only words on the page for us are in red and they say:
"Your email could not be sent because an unkown error has occurred. Please try again."
Then we have the option of pushing the "OK" or "Cancel" button.
Can anyone help us get beyond this obstacle?
THANKS!!

You need to enter the email id in preferences. Once you put it, you will receive a verification code. You need to put this verificaiton code in the sender verification window. This is required if you are using Adobe email service. You can change the email provider from sharing preferences.

Having trouble with html snippets and movies in iweb 09

Hi I have built a site iweb2.0.4 and recently moved it onto my new machine with iweb 09 on. Basically I have been putting in videos that I have exported for web out of Quicktime. In the past I have simply added an html snippet code like this in <iframe src="http://evileducation.org/stammuraifinalcomp/ReadMe.html" style="width: 340px; height: 285px"; scrolling="no" controller="true" frameborder="0"></iframe>
I edit the ReadMe.html based on a tutorial I saw and it loads the movie after pressing the "Click to play" button. Now in 09 when I put the code in to the snippet it just shows a Quicktime symbol with a question mark. if you check the link below you can see the videos with the best I have managed to do so far which is get the new movies on but they both autoplay (I have linked in this instance to the 4kb .mov in each folder rather than the readme.html.). I don't want to just drag a video in I would like the options to view on phone or on computer etc and not for them to autoplay. Is there a new/ different way to do this now. Surely it shouldn't be this hard to get the export for web in Quicktime and iWeb to work together? The frustrating thing is if you check the link below the old movies work fine still it's just the 2 new ones. Soz for the long one!
http://evileducation.org/eviltwin_education_2010/movies_made_by_youngpeople.html

Less cryptic :
MAKE THE TWO MOVIES THE SAME AS THE OTHER EIGHT.
Here are some pages for your convenience you can study and nim :
http://www.wyodor.net/iFrame/
http://www.wyodor.net/MoreEmbed/
[Using the iWeb HTML Snippet|http://www.wyodor.net/blog/archives/2009/07/entry_213.html]
http://www.apple.com/quicktime/pro/tutorials.html
You may have to learn HTML/CSS/JavaScript.
for the young people with disabilities that made
Keep the emotions out of the equation.

Trouble with html and Foreca meteo maps

hey,...
here is the situation ,...
i try to display this type of address with "<mx:HTML >"
http://srv.foreca.com/foreca_com/loader20.swf?lang=FR&mode=world&continent=Europe
i have remplaced the "&" by "&"
but with no result
it is possible to display this type of address,...??
i supposed "yes "
but can you tell me how please,...
thanks in advance,...

i have remplaced the different special charactere...
and i have no more error in the debug,...
but the html page dont display the map
only a "error " message
"No Content Available"
My question is
is it possible to display a foreca weather map ????

Having trouble with simple tasks in pages 09

I am trying to put a single horizontal line above the page footer in a pages document that I am trying to create as a template
I've spent quite a long time with it and cannot figure it out
As much as a pain Word is, doing something like this is very simple - I thought Pages would be even easier!

sean
You look in exactly the same place, it is a paragraph (text) format.
+Inspector > Text > More > Border & Rules > choose a stroke > click on a position > choose color, thickness & offset (how far above the text)+
You can also draw a line, using the Shapes menu on the Toolbar.
Peter

Trouble with opening a 2nd page of Safari and getting Wx or Stock updates?

My ipod touch says it is connected to internet through my home wifi router and all the items under Settings>wifi seem correct. My windows laptop works correctly on the same router. But when I open Safari on the Touch, the first page of the web site opens but I can not then get beyond that page. That is, if I click on a topic in Yahoo for example, I get the message "Safari can not open page, not connected to the internet". Similarly, I can not get my weather updated or the Stocks updated. I get the message "Update Failed". My Touch works on other networks. Any suggestions?
Thanks

I don't recommend using Safari to check your connection. You have some other tools that will let you know what the problem is.
Tap Settings > WiFi > and then tap the blue > next to your network name. When your touch is connected to your network and your router has issued an IP address, you will see an IP address for the device, a subnet mask address, a router address, and a DNS address or two.
Most likely you are going to see a device IP of 169.x.x.x, and incomplete subnet mask address and nothing else.
The most common things to cause this are:
1. WEP encryption
2. Old router firmware
3. You need to reboot your router
All are fixable. See this article for general troubleshooting help with WiFi: http://support.apple.com/kb/TS1398

CS5 trouble with updating main template & pages is a dreamweaver problem

The web site is www.KosherWoman.com which I work on with DWCS5.
Whenever I update anything - the nav,- add a side bar ad or promo or add a new page - I test it via F12. It shows the changes on my pages, on the nav & on the side bars. But when I upload it to my server,the changes aren't reflected on-line. I use the 'put' method & when that doesn't work I expand to show the local & remote site & I drag & drop with Dependent files as a yes. Again, the changes do not occur.
After failing to have the changes show up when I copied the dreamweaver site to a flash drive & tried it on another computer in my office, I then gave it to a co-worker who went home & tried it putting the flash drive on his computer. He has DW CS4 & tried to update pages from there. He, too, tested with F12 & everything was correctly changed but they also failed to take after being 'put' & after trying both from dreamweaver & from remote - the old fashioned way of dragging & dropping. The site has been up since January & only developed this problem a couple of weeks ago.
Is this a Dreamweaver problem or possibly a problem of my hosting company earthlink.net.?

KosherWoman wrote:
HOW DO YOU DO THIS?
When you have got it, you need to configure it using your FTP details. It acts as a FTP program and it is very nice indeed. It is like using your host's computers/servers as your own.
Hope this helps.
OK I am not currently on Windows 7 machine so I will tell you what I do in Windows XP. The method is still the same in Windows 7.
1) Open/Click on Network from your start button (the one you said you have got it)
2) now in windows XP, I see something like this:
3) Now can you see the first item that says Add a Network Place? Click on it
4) For about one or two windows you just need to click next until you come to a screen that looks like this:
In the above box you need to enter the FTP address like ftp://yourdomain.com (whatever your host has told you about this)
You just continue doing this - follow the on screen instructions and you are done.
If I get time I'll see if I can post exact instructions for Windows 7 or somebody else like John Waller can do this because he has a better machine than mine! My machine is refurbished from old systems I found on some streets discarded by some business!
hth

Trouble with HTML

Hello,
I want to write a guestbook - applet for my website.
The applet contains a JTextPane and supports formatted
text like italic, bold etc.
So, when the user clicks some button, I want to update
a special html-file called guestlog.
Here I want to insert the formatted text from the Textpane
directly after the BODY-Tag.
My problem is that I didn't find out how to do that!
Is it possible to convert the Text from the textpane to HTML
and keep its format?
Codesamples are welcome!
Thanks in advance,
Markus

Ok, here is what I already have (it's not very much!)
Important is method update().
My problem is that I just don't know how to insert code
after the Body-tag.
The code below creates a new BODY tag at the wrong place
(inside of <Head>).
I also tried to iterate through the document and retrieve
the Position of <Body> what also didn't work.
(Element.getStartOffset() returnd a value of 3 what I can't
apply to the HTML-file)
import javax.swing.text.html.*;
import javax.swing.text.*;
import java.net.*;
import java.io.*;
import javax.swing.JTextPane;
import javax.swing.text.html.parser.*;
public class HTMLUpdator {
//Document with new text from JTextPane
HTMLDocument textDoc;
//Document with existing Text from "guestlog.htm"
HTMLDocument doc;
JTextPane textpane;
URL base;
HTMLEditorKit kit;
public HTMLUpdator(URL base) {
//Place of "guestlog.htm"
this.base = base;
public void update(){
try{
//Construct a reader to load "guestlog.htm"
Reader rd = getReader(base.toString());
//Read guestlog.htm into doc;
kit.read(rd, doc,0);
System.out.println("Content of guestlog.htm: " + doc.getText(0,doc.getLength()));
System.out.println("Content of JTextPane: "+ textDoc.getText(0,textDoc.getLength()));
//Insert new text from JTextPane into doc
kit.insertHTML(doc,doc.getStartPosition().getOffset(),
"<p>" + textDoc.getText(0,textDoc.getLength()) + "</p>", 0,0,HTML.Tag.BODY);
//Write doc back to disk as "guestlog.htm"
File f = new File("guestlog.htm");
     try {
          FileOutputStream fstrm = new FileOutputStream(f);
kit.write(fstrm,doc,0,doc.getLength());
     } catch (IOException io) {System.out.println(io.toString());};
} catch (Exception e) {
e.printStackTrace();
public void setJTextPane(JTextPane in){
this.textpane = in;
this.textDoc = (HTMLDocument)in.getDocument();
this.kit = new HTMLEditorKit();
this.doc = (HTMLDocument)kit.createDefaultDocument();
static Reader getReader(String uri) throws IOException {
if (uri.startsWith("http:")|| uri.startsWith("file:")) {
// Retrieve from Internet.
     URLConnection conn = new URL(uri).openConnection();
return new InputStreamReader(conn.getInputStream());
} else {
// Retrieve from file.
     return new FileReader(uri);
The Created HTML-Code looks like follows
(look at the wrong body tag inside head):
<html>
<head>
<body>
<p>
"Text from JTextPane"
</p>
</body>
<title>G�stebuch </title>
</head>
<body bgcolor="#000000" text="#FFFFCC" link="#FF9900" alink="#669933" background="_themes/artsy/arttilea.jpg" vlink="#999900">
</body>
</html>
Help is very appreciated!
Greetings,
Markus

Trouble with HTML snippet

An HTML snippet does not work once published to a website although it does work in the "view published site" option. Error message "Not Found URL requested". I use iWeb for my website and Firezilla to publish to www. Any solutions please?

This could be caused by the file in question not being uploaded to the server or an error in the URL.
You need to use your FTP app to have a look at the files on the server to see if the appropriate one is actually there and in the correct place.

Having trouble with my PHP code. Appers to get stuck on a white page.

HI all,
I have just began having trouble with my PHP code. Was working before and haven't made any changes to the code since last time it worked.
What happens is after the form is submitted it goes to a white page (no text just all white page) and in the address bar it has the path for my php page. what supposed to happen is either it goes to a success page or a error page.
I've had a problem where the info entered is correct but was directed to the error page. i managed to fix that issue but i am puzzled what is happening to my php page now.
Mind you that i didn't write this code i just took over the responsiblities of this website and i am hopping that its a quick fix.
I appreciate any help you could give me. Thank you.
CODE:
<?php
   $to = '[email protected]';
      $from = '[email protected]';
        //Make sure we have some info posted from the form...
        if (isset($HTTP_POST_VARS)){
            //Clear the body of the message to be sent
            $body = '';
            //go through all POSTed variables sent
            while (list($key, $value) = each($HTTP_POST_VARS)){
    if($key <> "Submit" && $key <> "submit") {
     $body .= $key . ' = ' . $value . "\r\n";
            //Now building mail headers.....
            $headers = "From: ".$from."\r\n";
            //Mail message
            $success = mail($to, "Email Club" . date("m/d/Y"), $body, $headers);
   // CURL stuff.....
   $ch = curl_init();
   curl_setopt($ch, CURLOPT_FAILONERROR, 1);
   curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1);
   curl_setopt($ch, CURLOPT_TIMEOUT, 4); //times out after 4s
   curl_setopt($ch, CURLOPT_RETURNTRANSFER,1);
             if ($success){
    //readfile('http://www.lvpaiutegolf.com/thankyou.html');
    curl_setopt($ch, CURLOPT_URL,"http://www.lvpaiutegolf.com/thankyou.html");
    header("Location:http://www.lvpaiutegolf.com/thankyou.html");
            else{
             // readfile('http://www.lvpaiutegolf.com/error.html');
     curl_setopt($ch, CURLOPT_URL,"http://www.lvpaiutegolf.com/error.html");
     header("Location:http://www.lvpaiutegolf.com/error.html");
   // Output
   //$result=curl_exec ($ch);
   //curl_close ($ch);
   //echo $result'";
?>

Insert the install disk and boot from it. Use disk utitlity to repair your drive and check for errors (report any errors back here) then reinstall the os. This should not erase your data.

Help! I'm having trouble with images on my web page.

I'm trying to create a page with a bunch of my photos but I need the photos broken up into groups so I can discuss the different groups. So I simply cut and paste the photo area several times BUT now when I click on any picture in any group it only does a slideshow for the last group of photos.
I guess I could simply break the single page into multiple pages but that is so inconvenient in iWeb since it doesn't let you cut and paste template pages! Apple needs to seriously fix this shortcoming. How can you not allow cutting and pasting of pages??
Here's the page I'm having trouble with:
http://photo.braintransplants.com/Site/Astronomy.html
Thanks!
PowerBook G4 17 (A1085) 1.5 GHz / 1.5 GB RAM / 128 MB VRAM / 80 GB HD Mac OS X (10.4.2)

You probably realise by now that you're attempting to do things with iWeb which it just wasn't intended to do. Cutting and pasting the photo grid area just won't work as you want it to. To work within iWeb's limitations might i suggest that you use the 'nesting' approach described in several posts here already. Use a single representative image on your main page for each of the situations you want to cover, and link each of these to an appropriate Photo page which has 'Include page in navigation menu' unchecked.
You could add a link on each of the Photo pages which returns to your main descriptive page.

Trouble with html on copyright page

Similar Messages

Maybe you are looking for