Trouble with import to LR4 from 5DmkIII. Intermittent.

I am having trouble importing raw file from my Canon 5D mkIII to Lightroom 4.
It works sometimes and sometimes it doesn't.
When it fails, I get a list of the files that failed to import displayed on the screen.
It often imports a few files and then fails to import the rest.
Any suggestions would be appreciated.
Scott.

Thanks for your quick reply.
I never use a card reader... I think I have one somewhere, so may try that.
I never import to the local drive, so don't want to start that. Have been using LR for about 4 years, this problem is quite recent.
I'm importing right now, but using a 5DmkII. It seems to be working a lot better so far. This would indicate that the 5DmkIII was the issue, but as it's not a constant problem, I didn't think it was the camera.
I think that the 5DmkIII struggles more with the higher capacity cards. 64GB is a nightmare. 32GB is not much better. 8GB seems ok.
The IMPORT screen used to open automatically when I plugged in my camera, but it doesn't any more. Not sure if that is somehow related.
Scott.

Similar Messages

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Having trouble with imports never finishing

I am having trouble with imports that never finished. It is almost like the pictures are stuck on one image. the only way to get out of Iphoto is to force quit. The next time I open, there are a number of images that still need to be imported, but the import never finishes and seems to stop at the same image. When I go to close down I get the message that Photos are being imported to the library.
Anyone have any suggestions.
Thanks

Photo:
Welcome to the Apple Discussions. Check out your iPhoto library and make sure all photos are viewable and there. Force quitting when iPhoto is working can corrupt the database file, Library6.iPhoto. Make a backup copy of it and save in another folder.
First make a backup copy of your iPhoto Library folder. Now download and run BatChmod on the iPhoto Library folder with the settings shown here, substituting your account name for mine. You can either type in the path to the folder or just drag the folder into that field. Open iPhoto and see if it will work OK.
If not, launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options.
Lastly use iPhoto Library Manager to rebuild the library. Here's how:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: It can take some time to create the new library if you have a lot of photos. One user reported that with a library of about 5,000 images it took about 12 hours so plan ahead.
Do you Twango?

HT1550 I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

You can't do it in one step. Add to iTunes first, Once the tracks are in iTunes you may convert to a different format.
tt2

Trouble with the hosted website from a page viewer web part. (Sahrepoint 2010)

Hi everyone,
I am facing trouble with sharepoint and I would like some help.
I use Sharepoint 2010 and I have included a page viewer page part in one the pages I 've created that hosts another website. Although most of the functionality of the hosted website is there, some functions of it don't work. These functions are apply buttons
or downloading documents buttons. My guess is that the web part has to update dynamically and it should be independent from the Sharepoint page.
Is there a way to do this? It is important that the website is hosted in the since at the same page I have s guide on how to use the hosted website.
If this can't be done using a page viewer webpart I am open to other suggestions as well.
Thanks in advance!
Sakis

Is it possible that the hosted website page is using HTML5 of other functionality that isn't supported by the IE-8 restriction in the SharePoint master page? We've run into that before, where the page wouldn't work in the page viewer. I also had problems
where Chrome/Firefox wouldn't display a pager viewer when it crossed hosts/changed protocol.
What I had to do was add some javascript/Jquery to pop up another window to view the page if I wasn't on IE, getting out of the restriction of the SharePoint master page. If I was in IE the page viewer webpart worked. Not ideal, but maybe you could
adapt - they could see your instructions on the page but work with the host page on another.
<script type="text/javascript" src="/Javascript/JQuery/JQueryMin-1.8.2.js"></script>
<script type="text/javascript">
$(document).ready(function() {
var isIE = /*@cc_on!@*/false || document.documentMode;
if(!isIE) {
window.open('http://fmgblog/measure/email/dashboard.php');
}); // end of document ready
</script>
Robin

Trouble with imported sound also going to IDVD

I imported some video and it was fine...then I imported another clip and placed it in front of the first clip. Suddenly that first clip has no sound. It is on the same audio track and the volume is clicked. i can hear the second clip fine.
Also...I have a great deal of trouble with the digital tape looking fine on the camera, but then all jumpy and the picture is all digital screwy when its imported to imovie.
When createing a new IDVD project, is there anyway to create a new on rather than just opening up the last one I was working one? That feature is all annoying and cause me to create duplicates of the work, eating up my precious space!

I would honestly like to know why it would not work to just use the exported video from FCE into iDvD, there should be no aspect change in my case. The source in in 720x480. I also would have thought that FCE would be set up to transfer to dvd since much of what is done will need to be shown on that format?
Anamorphicizer did not work for me!!
myDvdedit I have not tried yet as looks to be too many steps to be practical.
I suppose I will try QTpro.
Any thoughts?

Is anyone else having trouble with Siri calling someone from your Contacts on the Iphone 5?

Has anyone had trouble with Siri on the Iphone 5 in dealing with your Contacts. She gives all of the correct information on scores for the NFL but not if I ask her to call somebody in my contacts. She has no trouble with which movies are playing tonight at my local theaters.
If I ask her to call someone from my Contacts, she takes a very long time and then says something like this, "Uh oh, there's a problem. Can you try again?" or something of this nature. Any help appreciated. BTW I download my information from Itunes and also had to change my sim card in order for Verizon to keep my same telephone number.

I have not had this problem. I am new to Siri (with an iPhone 5 upgrade from an i4) and Siri has made a number of calls from my contacts. She asks, which John Doe (if I have more than one), which number (if I have more than one) and off we go.
Maybe, you have some setting wrong.

Issue with importing effects settings from 3.0 to CS5.5

Several times I've attempted to import effects settings from 3.0 into 5.5 using the 5.5 Import>Application Settings function. Each time it says that it is unable to do it because of some unknown error. Is there another way to import the settings? I'm in the middle of an album project in 3.0.1 and would like to try 5.5 with some of these existing sessions. I've used the SuiteSpot studios Ses2Sesx program to translate the session. It imports fine, but none of the effects or racks import. I very much want to be able to do that.

Hi Michael,
These effects are mostly external VSTs, but a few of them are native
(Parametric EQ). The program will just not import the settings .xml
file or the vstmanager settings .xml. The VSTs seemed to have been
found easily by the program. I have not yet gone through them all to
see if they will pop up.
Another interesting thing - when I installed AACS5.5 I lost the ability
to open AA 3.0.1. I had to reinstall 3.0.1 in order to be able to use it.
I'm not liking this program at all. I don't like the interface, the
GUI, or the navigation through the program.

Anyone else having trouble with their iPad disconnecting from wifi since 6.0.1 update

Anyone else having trouble with their iPad dropping wifi about once a week since 6.0.1 update?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problem with importing RAW files from camera

LR 1.3 refuses to import raw files from my camera. Only JPEG's are imported. Got a Canon 350D/Rebel XT. Once I copied the raw files to disk (using Camera Window) Import from disk works fine and converts the CR2 to DNG without a problem. The preference "Treat JPEG files next to..." makes no difference. Anybody a clue what's wrong?
Thanks, Edwin

Yeah this is a known bug with Canon cameras in general (not just using Lightroom!). If you use the camera to download your images anyway, I believe the trick is to set the camera to mass storage mode and you'll also get the RAWs. Lightroom's import from camera is very buggy though, hence it is a better idea to use a reader, or to manually copy the files to your harddisk first and import from there.

Troubles with launching Java GUI from C++

Hi,
I'm launching a Java program from my C++ program (in linux). For C++ I'm using the Xm library for the GUI. When I want to instantiate a new Java object, I get the following error:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x4015C475
Function=XmRenderTableFree+0x15
Library=/usr/X11R6/lib/libXm.so.2
This is a backtrace (see #17):
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 1024 (LWP 19643)]
0x4015c475 in XmRenderTableFree () from /usr/X11R6/lib/libXm.so.2
(gdb) backtrace
#0 0x4015c475 in XmRenderTableFree () from /usr/X11R6/lib/libXm.so.2
#1 0x40153cd9 in XmFontListFree () from /usr/X11R6/lib/libXm.so.2
#2 0x4c6ed4c4 in Java_sun_awt_motif_MComponentPeer_pSetFont () from
/localhost/packages/java/j2sdk1.4.0/jre/lib/i386/libawt.so
#3 0x423b6129 in ?? ()
#4 0x423aef93 in ?? ()
#5 0x423aef93 in ?? ()
#6 0x423aef93 in ?? ()
#7 0x423aef93 in ?? ()
#8 0x423aeebc in ?? ()
#9 0x423aef93 in ?? ()
#10 0x423aef93 in ?? ()
#11 0x423ac195 in ?? ()
#12 0x404d6156 in JavaCalls::call_helper () from
/localhost/packages/java/j2sdk1.4/jre/lib/i386/client/libjvm.so
#13 0x40570ccd in os::os_exception_wrapper () from
/localhost/packages/java/j2sdk1.4/jre/lib/i386/client/libjvm.so
#14 0x404d62a4 in JavaCalls::call () from
/localhost/packages/java/j2sdk1.4/jre/lib/i386/client/libjvm.so
#15 0x404de12d in jni_invoke () from
/localhost/packages/java/j2sdk1.4/jre/lib/i386/client/libjvm.so
#16 0x404de94e in jni_NewObjectV () from
/localhost/packages/java/j2sdk1.4/jre/lib/i386/client/libjvm.so
#17 0x0804d27b in JNIEnv_::NewObject (this=0x819af2c, clazz=0x819b938,
methodID=0x8293af8) at /localhost/packages/java/j2sdk1.4/include/jni.h:840
#18 0x0804cb0a in AppletViewer::AppletViewer (this=0x81a5628,
appletA=0x8193438) at AppletViewer.cc:227
#19 0x0804e17b in Applet::move (this=0x8193438, drawX=18, drawY=25,
drawWidth=376, drawHeight=77, scrollX=0, scrollY=0, dpi=86) at Applet.cc:329
#20 0x0808b852 in PageAttrs::moveApplets (this=0x8192dd8, drawX=18,
drawY=25, drawWidth=376, drawHeight=77, scrollX=0, scrollY=0, dpi=86) at
Page.cc:321
#21 0x080ae6ab in XPDFCore::moveApplets (this=0x81698d0) at Page.h:190
#22 0x080ac87f in XPDFCore::displayPage (this=0x81698d0, pageA=2, zoomA=1,
rotateA=0, scrollToTop=1, addToHist=1) at XPDFCore.cc:585
#23 0x080acac3 in XPDFCore::gotoNextPage (this=0x81698d0, inc=1, top=1) at
XPDFCore.cc:670
#24 0x080b3901 in XPDFViewer::nextPageCbk (widget=0x8149ff0, ptr=0x81408e8,
callData=0xbffff6d0) at XPDFViewer.cc:1229
#25 0x401df59e in XtCallCallbackList () from /usr/X11R6/lib/libXt.so.6
#26 0x400b5803 in ActivateCommon () from /usr/X11R6/lib/libXm.so.2
#27 0x400b5689 in Activate () from /usr/X11R6/lib/libXm.so.2
#28 0x4020c453 in _XtMatchAtom () from /usr/X11R6/lib/libXt.so.6
#29 0x4020cd3e in _XtMatchAtom () from /usr/X11R6/lib/libXt.so.6
#30 0x4020cdf4 in _XtTranslateEvent () from /usr/X11R6/lib/libXt.so.6
#31 0x401ea462 in XtDispatchEventToWidget () from /usr/X11R6/lib/libXt.so.6
#32 0x401ead7e in _XtOnGrabList () from /usr/X11R6/lib/libXt.so.6
#33 0x401eafc8 in XtDispatchEvent () from /usr/X11R6/lib/libXt.so.6
#34 0x401eb3d9 in XtAppMainLoop () from /usr/X11R6/lib/libXt.so.6
#35 0x080ab04c in XPDFApp::run (this=0x81175b0) at XPDFApp.cc:299
#36 0x080b8eef in main (argc=2, argv=0xbffffa84) at xpdf.cc:283
Now here's the interesting thing: in the constructor of my Java class there's a call to pack() to initiate my Java GUI. When I remove that call everything works fine (but then I haven't got a GUI though). setVisible(true) in the Java code also gives that problem.
Has C++ or the Xm library some troubles with the Java GUI? Or what the hell is going wrong?
PS: On Solaris, the very same code works perfectly...

I really need a solution.
Is it possible it has something to do with threads?
Do I have to do AttachCurrentThread or something like that? Is that necessary?
Btw, I assigned 10 duke dollars to this topic.

Problem with importing a clip from another iMovie project

Hello
I want to import a clip from one iMovie project to another iMovie project.
Both projects are in 16:9, but when I import a clip it's no longer in 16:9.
The clip is croped and I have a black bar on the right and left side.
How can I solve this ?
Jufke

Have you tried Copying the clip in Project A and Pasting it into Project B?
When you Copy and Paste clips, try to Copy and Paste all at the same time. More here:
http://discussions.apple.com/thread.jspa?messageID=2356757&#2356757
Karl

Troubles with importing in iMovie

Hi, I have movies that I transferred from my camcorder to iPhoto. However, when I try to import the movies from iMovie it doesn't seem to recognise there are movies available to import from iPhoto. Any ideas why?

OK let's step back a moment. You are using an analog camera, yes? And then that is hooked up to an AV(analog) to Firewire (digital) converter, yes? And iMovie sees the converter ok, yes? So then you put the camera in VTR mode, but hitting import in iMovie would normally command a Firewire connected DIGITAL camcorder to start playing. Since you have an analog camcorder, there is no way for the Mac or the converter to command it to start playing.
Soooo, I would guess you FIRST need to hit PLAY on the camcorder. When it starts to play the tape you should see it come through on the Mac screen. If so, NOW hit import in iMovie to start capturing.
Patrick

Trouble with Importing from Canon 6d

Hi,
When I try to import from my Canon 6D (RAW), it shows all the previews, but will only successfully import a handful of the photos. I get a dialog box saying that the files cannot be read. If I turn off the camera, then try again, it imports just a few more. Finally, after 3 or 4 attempts, all the photos are imported. Any suggestions? Thank you!
(I'm on a Mac, OS 10.7.5, LR5. Also, I have checked the permissions for the destination folder, and it is allowed for both read/write.)

Something is interfering with the transfer of images to your computer that works for most other people. It could be anything from and in between the camera and the computer hardware.
These alternatives for how to get the images to your computer and into LR are ways to troubleshoot where the issue is, and ways to get things going until you do figure out what the problem is.
Another suggestion would be to clear your card of images after things have been imported. It sounds like LR is having to look through a lot of extra images that are already duplicates and with your iffy transfer setup, not a lot of actual images make it through each time before the transfer fails.
If things worked ok with LR3 and now aren’t working with LR5, then what has changed is Adobe uses different OS-level functions to transfer images and some of those newer functions may be susceptible to different things.

Trouble with import to LR4 from 5DmkIII. Intermittent.

Similar Messages

Maybe you are looking for