Trouble with "incomplete transfers" via Cyberduck

Coincidentally or not, since upgrading to iWeb 09 I've had a lot of trouble uploading my updated pages to the website. I haven't made any huge changes to the pages and they're very light-duty pages (all text plus one low-res photo per page). . they just keep coming back as Incomplete Transfers when I try to upload them via Cyberduck.
Should I try another FTP? Is this a common Cyberduck problem?
All thoughts are appreciated,
roxpat

After two days of messing with it. . .and posting the above message. . .it suddenly started working just fine. Go figure.

Similar Messages

IPhoto: trouble with sending photos via gmail.

For some reasons, for about one or two months ago start having troubles with sending photos from iPhoto via gmail.
It used to work perfectly, but now refuses to send photos. Pop up message says that there are some trouble with accessing accounts.
Once I restart my computer it works well again.

Hello ilya,
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.
Mail: Can't send messages, "Cannot send message using the server smtp.xxxxx.com" alert appears...
http://support.apple.com/kb/TS1482

Little troubles with DVB-S2 via MPlayer

Hi,
I use the MPlayer already for quite a while to stream DVB-S and DVB-S2 with it. But for approximately two weeks something changed while watching HD-channels: the video track lags every few seconds; the audio track is quiet normal. However, the non-HD channels hide the problem.
E.g. while watching a German HD-channel, I find following terminal outputs:
[h264 @ 0xf2b820]mmco: unref short failure
[h264 @ 0xf2b820]reference picture missing during reorder
[h264 @ 0xf2b820]Missing reference picture
[h264 @ 0xf2b820]Increasing reorder buffer to 2
h264 @ 0xf2b820]Increasing reorder buffer to 3
[h264 @ 0xf2b820]Increasing reorder buffer to 4
[mpegts @ 0xeb3080]PES packet size mismatch
**** Your system is too SLOW to play this! ****
Specially this message I can't understand, because I'm using a CPU AMD Phenom II X4 955 3,2 GHz, 8 GB Corsair XMS3 DDR3 RAM and the graphic card ASUS GTX 460 Top GDDR5 PCIe 1024 MB. But, let's continue with the outputs:
[h264 @ 0xf2b820]concealing 880 DC, 880 AC, 880 MV errors
[h264 @ 0xf2b820]mmco: unref short failure
[h264 @ 0xf2b820]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
[h264 @ 0xf2b820]illegal short term buffer state detected
Furthermore I'm using two HHD WD20EARS, which are connected to RAID1 via 3ware 9650SE-2LP, and the DVB hardware decoder card Hauppauge WinTV-NOVA-HD-S2. My desktop environment is KDE SC 4.8.
For starting the DVB-S2 streaming I use szap-s2 -r -p -S 1 -c ~/.mplayer/hdchannels.conf "NAME-OF-THE-HD-CHANNEL" in one terminal and mplayer /dev/dvb/adapter0/dvr0 -demuxer lavf -cache 8192 in a second terminal.
I just mention all this stuff because I've absolutly no idea, what could be the reason. Before this troubles started, two weeks ago, everything worked flawlessly. Checking the /etc/log/pacman.log I can find out, that the Linux kernel was upgraded from 3.2.6-2 to 3.2.7-1 on 24th February. I'm not sure, but maybe since that time these failures appears. Presently I'm using Linux 3.2.8-1.
Has anyone an idea what might just be the cause? (Perhaps it could be a option to try the LTS-kernel?)
Last edited by maik-hro (2012-04-13 10:39:59)

So, today I just made some small tests. First of all I tried to start a HD-channel with WinTV7 on Windows 7: The channel was streamed correctly for almost one minute and than it was lost - and I had no possibilty to get it back.
After that I tried again to start the same HD-channel on Linux. I apologize in advance to the large amount of text but following is the terminal output of the first minute (finally canceled by STRG + C):
MPlayer SVN-r34799-4.6.3 (C) 2000-2012 MPlayer Team
183 audio & 398 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /dev/dvb/adapter0/dvr0.
Cache fill: 17.97% (1507328 bytes)
libavformat version 54.2.100 (internal)
libavformat file format detected.
[NULL @ 0xf50700]non-existing SPS 10 referenced in buffering period
[NULL @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 10 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 11 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 11 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 12 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 12 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 13 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 13 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 14 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 14 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS referenced
[h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
[h264 @ 0xf50700]non-existing PPS 0 referenced
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]no frame!
[h264 @ 0xf50700]mmco: unref short failure
[h264 @ 0xf50700]mmco: unref short failure
[h264 @ 0xf50700]Increasing reorder buffer to 1
[h264 @ 0xf50700]Increasing reorder buffer to 2
[h264 @ 0xf50700]Increasing reorder buffer to 3
[h264 @ 0xf50700]Increasing reorder buffer to 4
[h264 @ 0xf50700]mmco: unref short failure
[mpegts @ 0xed4800]Estimating duration from bitrate, this may be inaccurate
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (mp2), -aid 0
LAVF: Program 11100
LAVF: Program 11110
LAVF: Program 11120
VIDEO: [H264] 1280x720 0bpp 50.000 fps 0.0 kbps ( 0.0 kbyte/s)
Load subtitles in /dev/dvb/adapter0/
Cache not responding! [performance issue]
Cache not responding! [performance issue]
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 54.8.100 (internal)
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Unsupported PixelFormat 61
Unsupported PixelFormat 53
Unsupported PixelFormat 81
[h264 @ 0xf50700]Missing reference picture
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]concealing 3600 DC, 3600 AC, 3600 MV errors
[h264 @ 0xf50700]Missing reference picture
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]concealing 3600 DC, 3600 AC, 3600 MV errors
[h264 @ 0xf50700]Missing reference picture
[h264 @ 0xf50700]decode_slice_header error
[h264 @ 0xf50700]concealing 3600 DC, 3600 AC, 3600 MV errors
[h264 @ 0xf50700]Increasing reorder buffer to 1
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [vdpau] 1280x720 => 1280x720 Planar YV12
A:61580.2 V:61580.9 A-V: -0.639 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0 50%
[h264 @ 0xf50700]reference picture missing during reorder
[h264 @ 0xf50700]Missing reference picture
[h264 @ 0xf50700]mmco: unref short failure
A:61580.3 V:61581.1 A-V: -0.742 ct: -0.004 0/ 0 ??% ??% ??,?% 2 0 50%
[h264 @ 0xf50700]Increasing reorder buffer to 2
[h264 @ 0xf50700]Increasing reorder buffer to 3
[h264 @ 0xf50700]Increasing reorder buffer to 4
[h264 @ 0xf50700]mmco: unref short failure
A:61585.5 V:61586.0 A-V: -0.430 ct: -0.490 0/ 0 86% 7% 0.7% 125 0 50%
[mpegts @ 0xed4800]PES packet size mismatch
A:61585.9 V:61586.3 A-V: -0.400 ct: -0.520 0/ 0 85% 7% 0.7% 125 0 50%
**** Your system is too SLOW to play this! ****
Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
- Try -ao sdl or use the OSS emulation of ALSA.
- Experiment with different values for -autosync, 30 is a good start.
- Slow video output
- Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
- Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
- Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
- Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
- Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.
A:61589.5 V:61587.1 A-V: 2.333 ct: -0.432 0/ 0 83% 7% 0.8% 125 0 50%
[h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
A:61589.5 V:61587.2 A-V: 2.334 ct: -0.430 0/ 0 83% 7% 0.8% 125 0 50%
[h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
A:61589.5 V:61587.2 A-V: 2.332 ct: -0.428 0/ 0 83% 7% 0.8% 125 0 50%
[h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
A:61592.2 V:61589.9 A-V: 2.242 ct: -0.422 0/ 0 58% 5% 0.9% 125 0 50%
[h264 @ 0xf50700]mmco: unref short failure
A:61592.6 V:61590.2 A-V: 2.438 ct: -0.396 0/ 0 61% 5% 0.9% 131 0 50%
[h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
A:61646.7 V:61646.7 A-V: 0.000 ct: 1.818 0/ 0 62% 6% 0.8% 724 0 50%
MPlayer interrupted by signal 2 in module: decode video
MPlayer interrupted by signal 2 in module: enable_cache
A:61646.7 V:61646.7 A-V: 0.000 ct: 1.818 0/ 0 62% 6% 0.8% 724 0 50%
Exiting... (Quit)
Starting the same channel in SD I get these feedback:
MPlayer SVN-r34799-4.6.3 (C) 2000-2012 MPlayer Team
183 audio & 398 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing dvb://ARD.
dvb_tune Freq: 11836000
Cache fill: 17.58% (368640 bytes)
TS file format detected.
VIDEO MPEG2(pid=101) AUDIO MPA(pid=102) NO SUBS (yet)! PROGRAM N. 0
VIDEO: MPEG2 720x576 (aspect 3) 25.000 fps 15000.0 kbps (1875.0 kbyte/s)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 54.8.100 (internal)
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
[VD_FFMPEG] Trying pixfmt=0.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
[VD_FFMPEG] Trying pixfmt=1.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
[VD_FFMPEG] Trying pixfmt=2.
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [vdpau] 720x576 => 1024x576 Planar YV12
A:36766.2 V:36766.2 A-V: -0.001 ct: -0.332 19241/19241 14% 2% 0.7% 9 0 49%
I will not get rid of the feeling that it might actually be due to faulty input signals. May something's wrong with the satellite system (LNB, multi switch, something else)?

I'm having some troubles with videos transferring

I just bought a Ipod video 30gb. I can transfer songs and photos but not videos. in Itunes i see my videos but i seems like it doesnt transfer on my ipod, and also i transferred videos in .mp4 (as suggested) and Itunes doesnt even show them to me when i want to add them to my library.
I'm kinda lost here can somebody help please!!

as for transfer your video to your iPod make sure "automatically update all videos" is selected.
and as for your other question what did you use to convert the files? i have had troubles converting files with Quicktime. it doesn't always seems to work.

Trouble with incomplete installation of Adobe Creative Suite Production Premium

Hi,
I tried to install Adobe Creative Suite Production Premium from CD:s, but half way through the installation something went wrong and installation was abruptly interrupted and cancelled. I then went to disc 1 again to try and re-install the program, but then it says that I already have an installation (even if it is incomplete) and that I have to finish installing the one I have already started. But I cannot finish the one that is already started because I can't find any way how to continue an installation that has been started.
What can I do?

Nobody can tell you anything without proper system info or other technical details. We don't even know what version. For starters run the cleaner tool and try again.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Trouble with incomplete syncing with icloud

Only my calendar and contacts have synced using iCloud. Any ideas as to how I might remedy this or what I might be doing wrong?

I finally found another thread that answers part of my question: https://discussions.apple.com/message/16339884#16339884. Apparently Reminders syncing is allowed only through iCloud.

Trouble with LR download via Cloud Membership

I just purchase the creative cloud membership and am trying to download lightroon. When i click on the blue download bar, a Cloud pop-up appears, that lists which programs are to date, then lists all Apps, but LR is not an option on this list??????

Lightroom is close to the bottom of along list of applications. So, scroll right to bottom, but remember to first togle All Apps to show the new Apps list

I'm having trouble with back to my MAC. I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection. I'm wondering if the Verizon hookup is a problem.

I'm having trouble with back to my MAC. I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection. I'm wondering if the Verizon hookup is a problem.

I finally figured it out. Needed to update her Airport firmware and allow guest access, and also changed Sharing preferences to Allow Access for All Users.

Having trouble with running an APP transferred from my imac?

Having trouble with running an APP transferred from my imac?

It asks me to sign in. I sign in and nothing happens.

I've been having trouble with in getting iMessage to send messages. I decided to connect to my VPN (along with wifi) and it worked. Why won't it work via my wifi connection alone?

I've been having trouble with in getting iMessage to send messages. I decided to connect to my VPN (along with wifi) and it worked. Why won't it work via my wifi connection alone?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Trouble with sending huge arrays via DataSockets.

Hi,
I am having trouble sending huge arrays via Data Sockets from my main vi on the server PC to the vi on the client PC.
To further elaborate, in my main vi program I have created 3 arrays called Array1, Array2 and Array3 on my front Panel. By right clicking the mouse on each set of array and from the pop-up menu I selected Data Operations-> DataSocket Connection and I entered dstp://localhost/Array1 and clicked on Publish to broadcast the data from Array1. Similarly, I did the same for Array2 and Array3.
Now, in my client vi program I have created three arrays on my front Panel to read (Subscribe) the data from the three arrays broadcasted via DataSockets from the server’s main vi program. To subsc
ribe the data I did the similar process above and clicked on Subscribe to read the data (of course the IP address of the client PC will be different then the server PC so enter the hosts IP address). Once the data is received in the client arrays, I am using LV2 globals so that I can use these arrays on other sub-vi’s locally (instead of having each sub-vi get data from the server directly).
I succeeded in doing this with two arrays, however when I added the third array the DataSockets would not work consistently. For example the refresh rate would get slower at times and sometimes 2 out of the 3 arrays would update. I don’t know if I have exceeded the limit on how much data DataSockets can broadcast, but I need to have some mechanism to broadcast 6 arrays (approx. 10000 elements for each array) of double digits precision.
Has anyone come across this issue? Is there another way of broadcasting data more efficiently then DataSockets?
I would appreciate any
help that I can get.
I have attached the files for this program in the zip file.
First run the Server main program, testServeMainVI.vi, and then the client program, testClientMainVI.vi.
Thanks
Nish
Attachments:
beta2.zip ‏70 KB

DataSocket can be a lossy communication. I like the advice to flatten the data to a string, but another option would be to buffer the communcation. The problem might be that the data is being overwritten on the server faster than it is being read. There is an example of buffered datasocket on NI web page: http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=BA3F9DFED17F62C3E034080020E74861&p_node=DZ52000_US&p_submitted=N&p_rank=&p_answer=&p_source=Internal
Also, I have played with the new built in buffered datasocket in LabVIEW 7.0. It is pretty slick. If buffers the data both on the server and the client side.

Is anyone having trouble with email via iCloud?

Is anyone having trouble with email via iCloud? I'm not getting it on any of my devices, iPhone, Mac ... even the iCloud website.

yes! just loaded mountain lion yesterday beacuse my mail server was acting up and i thought it would help. now its worse, apple mail is giving me error messages, cant connect to server. i can get emails but can not send out. everytime i open the program it takes a VERY long time to load. thanks apple, great job!

I just bought a new computer and im having trouble with transferring my purchased songs to my iphone please help

im having trouble with tranferring my purchased songs to my iphone . The problem is that im using my house desktop windows computer because my laptop is broking and all my songs are mainly on that one . Right now im trying to see if i can tranfer my purchased songs from the desk top itunes to my iphone .Its not showing me options for my perdiciment please help!!.

Plug it in and sync it.
What is the issue?
It will erase the current content and replace with content from the new computer.

I had trouble with a iTunes download. Two songs of an album were not complete. I contacted iTunes and yawl post the the download again. My iTunes now has the complete copies. The trouble is my iPhone will not accept/sync the complete copies. What up?

I had trouble with a iTunes download. Two songs of an album were not complete. I contacted iTunes and they redownloaded the tunes. My iTunes now has the complete copies. The trouble is my iPhone will not accept/sync the complete copies. It will only play the original incomplete copies of these songs. I've made new playlists and made sure I had the correct items checked to backup/sync. Still only the incomplete copies are played via the iPhone. What's up? What can I do to get to the iPhone to sync the correct version?

- Are you saying that they are not listed in your Purchased section?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Are they listed in your Puchases history when you log into your account on your computer?
- Are they still available now for purchase? If not then you are out of luck
If they are still available and listed in your Puchase History then contact iTunes
http://www.apple.com/support/itunes/

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Trouble with "incomplete transfers" via Cyberduck

Similar Messages

Maybe you are looking for