Trouble with inviting attendees

I no longer am able to respond to invitations. i get a server error. also notifications don't show up in the notification box in ical.
anyone have an idea what is going on?

I also have problem with the mirroring of port on my SG200-08. The firmware is 1.0.6.2.
I mirror the port g1, to which my router to the Internet is connected, to the port g2 to be able to see the traffic with a Centos system running Bandwidthd connected to the port g2. The problem is that I only see the traffic coming in (downloads from the Internet) and not the traffic comming out (uploads to the Internet).
When looking at the SG 200-08 on the web interface at "Status and Statistics/Interface" and looking at the port g2, I see values for the "Transmit Statistics", but all the values are at 0 for the "Received Statisticsc" (see the attached file)
I confirmed that in "Administration/Diagnostic/Port Mirroring" is set up both Tx and Rx (it does not work either if I have Tx or Rx alone: I do not see the uploda traffic to the Internet). See the attached file.
This is very annoying as I purchased this SG 200-08 especially for this and it does not do the job porperly.
Does anybody knows a solution to this?

Similar Messages

When I invite attendees to an event the organiser's email address is not the one associated with that calendar; what can i do?

I use a couple of calendars in lightning; two of them have different email addresses associated in the calendars property page;
when i create a new event in one of those and try to invite attendees, the first member of the event is usually the email address associated with the calendar the event is created in.
with one of my calendars this works fine; and when i change the email address associated to that calender the organiser of events changes accordingly.
with the other one it does not. instead it shows an email address that i do not have configured in any of my email accounts nor have in any of my address books (but it is in fact setup as alias of the correct email address on the mail server, but how would thunderbird find that out?). when i change the associated email address to that calender the organiser of events is not affected, it still shows the wrong email address.
i have tried searching for the email address and significant parts of it in the thunderbird profile directory, to no avail.

I use a couple of calendars in lightning; two of them have different email addresses associated in the calendars property page;
when i create a new event in one of those and try to invite attendees, the first member of the event is usually the email address associated with the calendar the event is created in.
with one of my calendars this works fine; and when i change the email address associated to that calender the organiser of events changes accordingly.
with the other one it does not. instead it shows an email address that i do not have configured in any of my email accounts nor have in any of my address books (but it is in fact setup as alias of the correct email address on the mail server, but how would thunderbird find that out?). when i change the associated email address to that calender the organiser of events is not affected, it still shows the wrong email address.
i have tried searching for the email address and significant parts of it in the thunderbird profile directory, to no avail.

Having trouble syncing calendar and inviting attendees to events

I am a Yahoo! mail user with an iPhone 4s and I'm having two problems with my iPhone:
1. My calendar is not syncing properly. It seems to work fine between my Yahoo! mail calendar and the iPhone calendar. But when I add an event to the calendar from my iCloud account, it only syncs to my iPhone calendar, not my Yahoo! mail calendar.
I have a bunch of events that appear in both my Yahoo! mail calendar and my iPhone calendar... but they are not showing up in the iCloud calendar. I feel like there's some kind of missing link between my iCloud calendar and the Yahoo mail calendar. I can't figure out how to connect the two.
2. I don't have the option to "invite attendees" to events I create from my phone. However, if I create the event within iCloud, I get the option to "invite attendees." I want to be able to invite attendees from events I create on my phone - why isn't the option available?!
I have looked under Settings > iCloud and the Calendars is ON.
I have looked under Settings > Mail, Contacts, Calendars, and the the Calendars are ON there as well.
Please help!

I had the same problem this morning. Can't find a permanent fix yet, but was able to sync the calendars by going the the info tab in iTunes and scrolling down the page till you get to a section that lets you overwrite your iPhone with your computer. This is a one-time action, per iTunes. After clicking Calendar in the list, I was able to sync successfully. Hope this helps temporarily.

Cannot invite attendees to iCal event in iCal 5.0 on new MacOSX lion?

Hi there,
Background: I have two gmail calendars snyced with the new iCal 5.0 on MacOsx Lion.
Problem: When creating an event, I cannot add anybody to the event. The attendee field is just nonexistant. If I drag and drop a business card into iCal a new event is created with the person listed as attendee, but I cannot edit this event.
Cry for help: This is weird - I need this to work. With those basics, there is no excuse for iCal . I cannot find anything relevant on the web. Did anybody experience something similar?
Thanks for your support,
B

Got a solutions for you that worked for me because I have the same annoying problem.
1. sign in to iclould on the website www.icloud.com/
2. Go to your calendar
3. You'll noticed some extra benefits of creating invents here instead of iCal app. You can actually invite attendees!! Also, when selecting a day for your event, it pops up a calendar and you just click on the day you want. On iCal you have to manually type in the date numbers.
Hope this was helpful.
check out www.framedlegacyparties.com

Blackberry Calendar "invite attendee" feature

My husband has a Pearl Flip and I have a Curve 3G we are trying to add calendar appointments on both of our phones using the 'invite attendee' feature. When my husband creates an appointment he just invitee's me and the appointment shows up on my calendar, however, when I invite my husband to a calendar appointment he gets an email with the subject line stating the appointment name but nothing else (no time or date, just the name) and no appointment shows up on his calendar. Does anyone know why this is happening or how we might be able to fix this issue?
Thank you in advance for your help!

My husband and I are having the same problem. He has a Bold. I have the Storm 2. Any help with this would be doubly appreciated

Why was the option to invite attendees removed from Calendar??

With the new Samsung "upgrade" we can no longer invite attendees using Calendar.
And Google calendar only uses @gmail account, you can't add your biz email account.

Lets find the best option to stay on top of your schedule PennState22! Do you have the Galaxy S4 or Mini? Are you using the default Calendar app?
AshleyS_VZW
Follow us on Twitter @VZWSupport

TS3999 Help! Trouble with my calendar and icloud.

I am having trouble with my calendar and icloud.
Customers send me meeting invites and I can accept them no problem. But if they subsequently change the date or time I get an error message:
Access to “appointment name” in “Home” in account “iCloud” is not permitted.
The server responded:
“403”
to operation CalDAVWriteEntityQueueableOperation
sometimes the time changes in my calendar, sometimes it doesn't, and my customers keep getting messages back from icloud 'accepting' the original date, not the changed date!!
It is driving me an my clients crazy! any help would be appreciated.

I had a problem specific to the Calendar on web-based Firefox (PC) Was asked for a separate sign-in I'd never seen before which didn't work. I resolved this by signing out, signing in again.

Cannot invite attendees to a BB event created on handheld.

I was getting error KB19454 when trying to sync BB Desktop Manager. This happened two times and the only solution at this point is to restore my handset. This isn't something I'm willing to do regularly.
The way around this was to use Google Calendar in conjunction with iCal, Entourage, Google Sync and Spanning Sync. I got all the programs talking to one another but now I'm unable to invite attendees via my handset for events I create on the 9630.
I used to be able to send invitations with my default email address. Now my only option is to send an invitation with a Blackberry Messenger Group.
I have five calendar groups:
-Groups (the only option I can select to invite contacts)
-Device Default
-Gmail
-Work account
-Work account
This immediately started happening when I started using Google Sync.
Anyone have any thoughts?
Equipment being used:
-Blackberry Tour 9630
-Macbook v1.1
-Entourage 2008
-iCal v3.0.8
-Spanning Sync v3.0.4
-Google Sync (on handheld)
Thanks in advance!

Got a solutions for you that worked for me because I have the same annoying problem.
1. sign in to iclould on the website www.icloud.com/
2. Go to your calendar
3. You'll noticed some extra benefits of creating invents here instead of iCal app. You can actually invite attendees!! Also, when selecting a day for your event, it pops up a calendar and you just click on the day you want. On iCal you have to manually type in the date numbers.
Hope this was helpful.
check out www.framedlegacyparties.com

Why do I have the Invite Attendee option in some calendar events and not in others?

I just entered a lot of kids' activities into my Blackberry and couldn't send them to my husband's--the option was not there. I have previously been able to do this. In events that I entered prior to tonight, the invite attendee option is still there, even if I hadn't invited anyone yet. In each event that I entered tonight, the option is not there. I recently installed the newer version of Facebook. My husband changed his facebook options (unchecked the box connecting his facebook account with the blackberry calendar application) and his invite attendee option returned. I tried the same thing, and it did not work. I also went under default services and changed the calendar (CICAL) to an email address instead of facebook, and that also did not work. I don't know if I have BES or BIS--how do I find out? I have tried checking to see if the desktop organizer is using the blackberry wireless synch as mentioned in a previous post, but that isn't an option next to calendar (only ASCII Importer/Exporter or Yahoo).

Hi and welcome to the forums!
mindianna wrote:
I just entered a lot of kids' activities into my Blackberry and couldn't send them to my husband's--the option was not there. I have previously been able to do this. In events that I entered prior to tonight, the invite attendee option is still there, even if I hadn't invited anyone yet.
Please tell me who is the email provider, Google, Yahoo, etc.
In each event that I entered tonight, the option is not there. I recently installed the newer version of Facebook. My husband changed his facebook options (unchecked the box connecting his facebook account with the blackberry calendar application) and his invite attendee option returned. I tried the same thing, and it did not work. I also went under default services and changed the calendar (CICAL) to an email address instead of facebook, and that also did not work.
Houston, we have a problem! The first version of Facebook that came out, had a bug that changed the default CICAL
to Facebook. In Default services the CMIME and CICAL should match the main email address, that is also the main
address on your PC.
Go to the calendar and once started, menu key, options. Calendar options is the name of the screen. You will see a calendar
for each email address, and one for Facebook. Highlight and click each calendar, not the number of records in each.
If you a a calendar for Device Default, let us know the records for that one as well.
I don't know if I have BES or BIS--how do I find out? I have tried checking to see if the desktop organizer is using the blackberry wireless synch as mentioned in a previous post, but that isn't an option next to calendar (only ASCII Importer/Exporter or Yahoo).
If your phone is a personal phone you setup your self, you're most likely BIS. I don't think this will be related to
the wireless sync. Please tell me what Calendar do you sync with. Outlook, Yahoo, etc.
Please go to options, advanced options, applications. Find Facebook and click on it, scroll down and tell me what
version it is. OK?
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Invite Attendees

In outlook when I create a new appointment on the calendar, I am able to "Invite Attendees". This then sends an email to the Attendee to accept or decline. If you accept it places the appointment automatically in your calendar.
I have had the capability with my BB. How do I do this on my iPhone 4?
RSWiser

This is only possible with an Exchange account on the iPhone. If you have that, when you create a new event there is an Invitees option, and anyone added to that list gets a meeting invite.

I have been having a lot of trouble with the latest itunes update and my ipod classic 80Gb i.e. being unable to sync songs, but now i have no files at all on my ipod, it is completely blank when i view it from my computer. I need help, please, anybody.

As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK Computer Inc. K50IJ
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038B8600B98D1E0
Current user is not an administrator.
The current local date and time is 2014-03-21 16:52:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)

uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

Trouble with OR in where clause

Hello,
I'm having trouble with execution speed. The problem seems to be with using OR in my where clause.
Here's the meat of the function where i_pledge_number is an input parm:
BEGIN
SELECT /*+ INDEX (pp) */ SUM(pp.prim_pledge_amount)
INTO return_amount
FROM
primary_pledge pp
WHERE
-- Get total if multiple allocations
pp.prim_pledge_number IN
(SELECT pc.pledge_number
FROM pledge_codes pc
WHERE pc.pledge_code_type = 'M'
AND pc.pledge_code = 'AC'
AND lpad(pc.pledge_comment,10,'0') = i_pledge_number)
-- Get total if single allocation
OR pp.prim_pledge_number = i_pledge_number;
RETURN return_amount;
END;
If I comment out either half of the OR statement (either the subquery or the pp.prim_pledge_number = i_pledge_number half) the function returns a value in .02 seconds. If I leave the OR in, it takes 2.764 seconds to execute?? Can someone please show me a better way (faster) to do this? I tried using nvl() around the subquery but couldn't get it to compile.
Thanks

These things are difficult to diagnose remotely, but here is something you can try....
SELECT */ SUM(pp.prim_pledge_amount)
INTO return_amount
FROM   primary_pledge pp
WHERE pp.prim_pledge_number IN (SELECT pc.pledge_number
                                 FROM pledge_codes pc
                                 WHERE pc.pledge_code_type = 'M'
                                 AND pc.pledge_code = 'AC'
                                 AND lpad(pc.pledge_comment,10,'0') = i_pledge_number
UNION ALL
SELECT i_pledge_number FROM dual)
   RETURN return_amount;
END;If that doesn't do anything (and it might well not) there are a large number of different ways we can recast this query. To save us further guessing please give us more details: execution plans, database version number, volumetrics.
Cheers, APC

A trouble with "LIKE" in a select statement

Hi!
I'm having trouble with "LIKE" in a select statement...
With Access I can make the following and everything works well:
SELECT name, birthday
FROM client
WHERE birthday LIKE '*/02/*';
but if try to do it in my application (it uses Access), it doesn't work - I just can't understand that!!!
In my application the "month" is always the currently month taken from the "System". Look what I'm doing...
String query1 = "SELECT name, birthday " +
          "FROM client " +
          "WHERE birthday " +
          "LIKE '*/" +
          pMonth +
          "/*' " +
          "ORDER BY birthday ASC ";
ResultSet rs = statement1.executeQuery(consulta1);
boolean moreRecords = rs.next();
The variable "moreRecords" is always "false", the query returns nothing although the table "client" has records that attend the query.
Please, anyone can help me?! It's a little bit urgent.
Thanks,
Katia.

Hi Katia,
I'll bet the problem lies with the characters you're using to escape the LIKE clause. You're using the ones that Access likes to see, but that's not necessarily what's built into the JDBC-ODBC driver class.
You can find out what the correct escape wildcard characters are from the java.sql.DatabaseMetaData.getSearchStringEscape() method. It'll tell you what to use in the LIKE clause.
I'm not 100% sure about your code. It doesn't use query1 anywhere. I'd do this:
String query = "SELECT name, birthday FROM client WHERE birthday LIKE ? ORDER BY birthday ASC";
PreparedStatement statement = connection.createStatement(query);
String escape = connection.getMetaData().getSearchStringEscape();
String test = escape + '/' + pMonth + '/' + escape;
statement.setString(1, test);
ResultSet rs = statement.executeQuery();
while (rs.hasNext())
// load your data into a data structure to pass back.
rs.close();
statement.close();Let me know if that works. - MOD

Trouble with inviting attendees

Similar Messages

Maybe you are looking for