Trouble with iPod setting screen

Right, Ive got all my music on my 5G 30gb iPod, the problem is, I also have a movie I want to put onto my iPod but Im not having much luck with it. I successfully coded the movie using HandBrake, and its currently under "movies" in my library. However, when I connect my iPod to my laptop, the iPod settings screen only brings up the Summary, Music, Podcasts and Contacts tabs. Also under the devices, it only has my iPod and its music. This does not give me the option of adding Photos, Movies or Games. I have iTunes 7.0.2 and Im sure the iPod is up to date because I only recieved it yesterday for Chrismas. Any ideas why and how I can get the Movies, Photos etc. under my devices and on my settings screen when the iPod is connected? Your help will be appreciated.

Try this: http://support.apple.com/kb/ts1567

Similar Messages

HT4528 I am having trouble with the touch screen. When I press - on the glass surface sometimes it doesn't respond back. I updated my software.

I am having trouble with the touch screen. When I press - on the glass surface sometimes it doesn't respond back. I updated my software.

This Apple doc might help ya out -> iPhone, iPad, iPod touch: Troubleshooting touchscreen response

Having trouble with intial set up

having trouble with initial set up!

Hi jandra31 and welcome to the forums!
You'll need to provide us with a little more information. At what point during the setup are you encountering a problem. What, exactly, is the problem you are encountering? Are there any messages?

Ive got an iphone 3gs and im having a trouble with its touch screen because when you sometimes tap it doesent respond?

i ve got an iphone 3gs and im having a trouble with its touch screen because when you sometimes tap it doesent respond?

Often a Restart and a Reset will resolve these issues...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the Phone On...

Trouble with DNS set up

Hello !
I've got a real trouble with my dns configuration... and i can't understand! so, i need some help....
well, qutie newbie in mac os server, i run in on a G4, and i had not noticed any trouble until i've decided to run open directory as a master with LDAP, wanting to have a kerberos protection for the users.
Kerberos doesn't want to play with me !
I've been in console mode to have a look, and, actually i've seen this :
"Oct 17 11:31:08 wakan servermgrd: servermgr_dns: no name available via DNS for 192.168.0.109
Oct 17 11:31:08 wakan servermgrd: servermgr_dns: no reverse DNS entry for server, various services may not function properly"
Ok... my DNS has a trouble... but i don't know how to fix it ! Is there anybody in this world who can help me?
I don't want to have a real DNS for my little server... but i understand that my config is not good. I can understand that having a caching DNS can improve the quality of my config, and, in other hand that it is necessary for having the services of OSX server in an effeciant way, but i don't know the way and the parameters i've to put in my config to fix it.
Now, just some words on my config...
First, i've got an adress provided by my FAI (the frenchy workd for ISP, i think) is "193.252.209.135". This adress is set on a d-link modem router via PPOE. The DNS of my provider (wanadoo.fr) are 80.10.246.1 and 80.10.246.132.
After this there is my G4 With mac osX server.
• en0, the "extenal gate" and the internal ethernet on the computer is plug on the modem with the adress "192.168.0.109". the router is set on "192.168.0.1". the dns are 80.10.246.1 and 80.10.246.132.
• en1, the "internal gate" for the network, an PCI card in the computer, has the parameters : adress "192.168.3.1", subnet "255.255.255.0", router "192.168.3.1". no dns records. (no VPN service for the moment). After this, i've a switch for the macs behind the server. (without any link agregation)
All those parameters have been set by the gateaway assistant.
And now the parameters inside the admin server :
DHCP : en1 - adress from 192.168.3.2 to 192.168.3.254, name 192.168.3. no static card. Router 192.168.3.1. No name for domaine by defaut, name servers 80.10.246.1 and 80.10.246.132 No LDAP, no WINS.
DNS : No zone transfert, recursivity is ON. No zone records.
NAT : set on full, Transfert and Network Address Translation.
When i've been on the terminal, i had those information:
"wakan:~ st$ sudo changeip -checkhostname
Password:
Primary address = 192.168.0.109
Current HostName = wakan.local
The DNS hostname is not available, please repair DNS and re-run this tool."
All my "main" services are working fine (AFP, Firewall, DHCP, DNS, Update) Open Directory is running without Kerberos. By the way, all the macs after the G4server can have a corect access to internet, and share information via LDAP of Open Directory, but i've to say that, a couple of days later, a friend of mine, who has a PC computer, can't have a DHCP dynamic address when he plug on my little network. I think that it is an other trouble, and i've decided to have e look to this later... but if someone knows how to resolve it...
So here begins the nightmare for me... so if anybody can help me... i realy need some help to fix this mystery!!!
Special thanks!

As the router modem is already doing NAT why use NAT in the server?
If you want to use OpenDirectory and other services you should/need to set up the DNS correctly using the server's private IP (and others in the same range the server is setup with). The domainname used internally can be different than your public one.
And then use the server as the only DNS for you LAN clients and the server itself. Forwarders (your ISP DNSes) in /etc/named.conf usually speeds up lookups of external addresses (also turning off IPv6 can help that too).

Trouble with ipod classic!!!

Hi all, i am having trouble with my ipod and i hope you can help me
I have a 80gb iPod classic and i am updated to the latest version of itunes. When i plug in my ipod, itunes stalls for a minute or two and when it finally comes back, itunes does not notice that the ipod is plugged in but it is shown on my computer and it says connected on my ipod. if anyone could help with this problem it would be a big help. Thanks.

Having EXACTLY the same problem on a 160 Gb model.
Win7 also asks for checking IPod for errors and recovery (answered NO).
Just bought 2 days ago my very first iPod: not bad as a start... :-/
(Weren't Apple products supposed to be hassle free?)
Thanks in advance for any help
Enrico

Anyone having trouble with iPod 1.2 update?

After going back from 7 to 6.05 (which I kept on another PC), I still find my iPod 5th gen. crashing occasionally when I play some podcasts. The fix has been to play a few moment from the podcast on the iPod through iTunes.
Everyone is bashing iTunes 7.0/7.01 - might there be a problem with iPod 1.2 upgrade too?

I don't have trouble with that.
But this might mean nothing, because I'm on a German version of InDesign CS6 v8.1.0 on Mac OSX 10.7.5.
What I try to do:
Change the preferences.
Change the workspace.
Restart your machine.
Restart InDesign.
The preferences should be sticky then…
Uwe

Do you have trouble with iPod Classic and Ford's SYNC?

Anyone have trouble with Ford SYNC recognizing iPod Classic? When I first bought my Lincoln my iPod Classic worked perfectly--just like it should with Ford SYNC. But a few months ago, when I plug in the iPod using a USB cable I get the message on Ford Sync that says, "incompatible device". At first I thought it was a ford problem so I began testing using a 2010 Buick and a 2010 Lincoln Navigator. My iPod classic doesn't work in either. However, a iPod nano works perfectly in either car. Also if I put some of my music on a flash drive it works fine in the Lincoln. So, I'm convinced that the problem is some type of update that occurred to my iPod or to iTunes.
I have tried several iPod Classics and several USB cables so it is definitely aiPod Classic software problem. By the way, my iPod Classics work fine by themselves--just not through Ford's SYNC.
I'm pretty lost as to possible solutions.
Thanks,

I have done some experimenting and testing with my old Classic iPod that uses operating system 3.1.1. I don't think this operating system has changed. However, later generation iPods such as nano, shuffle that use a different operating system seem to work absolutely perfectly in my 2010 Lincoln Navigator, especially the ones without a hard drive (i.e. flash drive). My conclusion is that the Ford SYNC updates have somehow not been backward compatible with the older operating system. I know this can be attributed to Apple for part of the problem but I suspect that Ford somehow did not do enough testing with the older iPod operating systems. Turns out there are probably 7 or more operating systems on iPods and while you would assume that "backward compatibility" is a no-brainer, that seems not to be the case with second party vendors such as Ford SYNC. Personally, I have given up trying to solve this problem and have gone to flash drive and a "line in" option. My old Classic iPod works exceptionally well, plus I have a spare so I can probably use these thing till "H freezes over". Being a older retired American these things may actually last a life time!

Trouble with iPod freezing, etc

Hi, I have a 40GB iPod (it's a year and a half old, thus long out of warranty), and while it frequently freezes, it's easily reset. However, recently it freezes, can't be reset, shows the sad iPod icon, but can be operational again after being set in disk mode. Today, it froze, sad iPod icon'd, and after being plugged in to my computer alternately displays: sad iPod, the still "battery charged to one bar" icon, and the apple icon. When I try to reset it while plugged in, it repeats this cycle, and when I try to put it into disk mode, the screen goes blank and stays like this for as long as I hold down the center and play buttons. If anyone can help after reading this long description, you would be my hero/heroine. Thanks.

Hi 1county,
What sort of trouble are you experiencing?

Help with ipod video, screen doesn't work

My ipod started acting weird when I updated the ipod software. My screen will freeze, but it's not black or white, it shows the "Do not disconect" sign but with a bunch of little color squares all over the screen. I've tried everything, restore it, reset it, everything and as soon as it turns on, the screen goes like this.
can anyone help me?
thanks!

Try the standard fixes to rule out a software problem:
- Reset. Nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store.

Having trouble with Ipod, restoring thing, kind of

This might be kind of long,
So two weeks ago my i tried to load my video ipod onto itunes but my computer said it didnt recognize the usb device, I left it there and then took it out and plugged it back in. This time it loaded on itunes but it said it was currupt. So I called my buddy and he walked me through the whole updating thing, so we updated everything, nothing helped. I tried restoring it but I kept giving me different messages, including the error 1418 one.
I took it to Best Buy, to have it looked at, and they said that nothing was wrong with it, and my computer was the problem. Somehow they also deleted everything off of it. When I got home, It began to work fine, I loaded all my stuff back on and everything. Yesterday, It started doingthe exact same thing. Both times it has been after my Ipod was fully depleted of power, so I think that this might be the problem, but the thing is even when the computer recognizes the ipod, it still gives my the restore screen.
Im grateful for any help anyone can give me, thanks.

See: Error 1415/1417/1418/1428 when restoring any iPod using iTunes 7 or later.

Having trouble with Ipod-because of cold??

I am having a problem with my ipod not wanting to change the songs with my ihome remote when attached to the ihome. It will not puase or play either when using the remote. I have put another ipod into the ihome and it works just fine. I also am having trouble plugging it into my car as it just gets an error. Also double checked this with another ipod. I have already reset and restored it with no luck. I think this problem maybe due to the fact that it was left in my car for a few hours and it was very cold outside. Can anyone tell me what I should/can do to fix this? I works in all other aspects, this is why I am so confused. Thanks!

I have discovered that the error I am getting from the car stereo is saying that it is a "connection" error between the car stereo and the ipod. So that kinda narrows it down and like i've said i know its the ipod b/c i have tested everthing else with a different ipod to double check things.

Bug? - trouble with iPod menus

I recently downloaded my first video podcasts, but I'm having some trouble playing them in my iPod. Although they are ok when played in iTunes, they didn't seem to be recognized as video by the iPod - at least when I selected them through the podcast menu (they played as audio with a small imaged on the left). But I just found they play perfectly fine, though, if I select them through the video ("recently added") menu. Weird.
But then under that menu (the "recently added" list under Videos) I got not only videos but also all the recently added songs/audio. Does this happen to everyone? Is it just me, or does this look like a bug?

Hi 1county,
What sort of trouble are you experiencing?

Trouble with amazon and screen locking the app with voiceover

Hey,
This is really bugging me, when I want to listen to a book in my amazon kindle app. I can't seem to screen lock my ipod touch, so that I can put it in a pocket or something instead of carrying it around, does anyone know how to screen lock or screen curtain the screen, so that it doesn't go weird. Thanks for your time.

Yes, I agree with this 100% - when listening, I can be doing other things, not looking at the screen. I figure 100% of the people using kindle portable devices are in agreement. My iPhone has a cover, but now I have bought yet a second case to put the first case in so that it covers the screen. But this is certainly not the optimum solution.

Having trouble with ipod and g4 tower.

hi all,
my ipod is erratic in the sense that sometimes the os will mount it and other times it wont. i cant determine any set of circumstances that lead to either. the ipod always shows up in the ipod updater often with strange serial codes not that of my ipod. when i restore the ipod. it mounts, itunes recognises it. everything works great.
when i eject it and plug it back in,im back at the start, no mount(equally often it mounts), not in itunes (ever), and a different serial no. in ipod updater.
i had the same problem with my ipod mini before it died. so i guess its a problem with my machine. everything else works fine.
ipod works fine with powerbook g4, imac g5 and windows
is this a common problem, is there a fix.

not sure what to tell you other than try posting your same question in the iPod section of the discussion forums.

Trouble with iPod setting screen

Similar Messages

Maybe you are looking for