Trouble with leading

This is going to sound a little basic but I am having some issues with leading. I am looking to match a document that I am building a template for. The document has a mix of different sized fonts and leading. When I try to match it though I am having trouble leading individual lines. For example if I want to bring 3,000 and Acre closer I end up putting the to close. Or if I lead collaborating and with close it them brings Metor to close. Am I going to have to use the "space after"option to format that or am I just using leading wrong? Here is a screen shot of the text. I am using Indesign cs5 on mac os 10.6.8

The leading affects the whole paragraph. Try the following:
- Show hidden characters from the type menu if they are not shown then expand your text box's width to make "The 3,000 Acre Classroom" in one line-->select the type tool and click before the number "3,000" and hit return you will find the letter "P" hidden character for the paragraph is shown after "The"--> Hit return again after "Acre". Now the words "3,000 Acre" are in a separate paragraph, select them with the paragraph symbol (hidden character "P") and start to increase and decrease the leading. This will affect only the words "3,000 Acre". In the same way you can select "The" and "Classroom" and adjust their leading independently.
I hope this was helpful.

Similar Messages

Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)

uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

The trouble with 'expression' -- how to edit that

I just walked to the corner bodega ( even though its korean sooo bodega is misleading ).. to get some beer...
ITS BEER THIRTY -- yipee !
and on way back down the block where I live ( which is suburban ) some boy kid on a bike was riding and playing with a girl kid ( probably was his slightly older sister - these kids probably around 12 years old ) in front of a rental property with some spanish americans hanging out in their cemented yard on hammocks near bar b q...with their own kids...(they have planted another hopeful "veg garden" around the perimeter of their so called yard...tomato plants etc )...so anyway, the picture here is a "neighborhood" of sorts with a somewhat lower middle class family atmosphere in a fairly lower class area on the verge of becoming middle class ( with God's help ).
And anyway, I passed by the boy kid on the bike and smiled at him cause he seemed to be a decent kid having fun with his friend ( they were sorta laughing about something and having fun before I showed up as the big "adult" and looked at me ). His smile back was like sunshine and true and he immediately recognized he could keep having fun with his friend and I wasn't a "threat" , but instead some sorta "neighbor". She did the same more or less ( I think she had some devious design re: the game they were playing ... like " OK, you think you're so great on that bike, try to CHASE me ! " or something like that....kid stuff... and fun thank God. This neighborhood has it's share of bad things going on in the streets at times. And that leads to my focus on " The trouble with expression".
A lot of people, like me for example, can't express themselves well in some ways. I didn't say , " Hi there kids ! What's new ? " when I met them on the way back from the bodega. I didn't stop and ask what the heck they were laughing about. Nor did I speak to the spanish people adjacent to the kids ...in their "yard" ...with the bar b q and hammock and obvious friday afternoon socializing they were into....
We in nyc area are typically a mixed bag of races... I'm white, kids were african amer ( black but more like brownish if you ask me ), spanish people like mexicans IMO... who cares. This is suburbia so you can imagine how more mixed it is in the city.
Anyway, the reason I don't express myself so well in situations like that ( spontaneously on the street ) is cause I used to stutter real bad as a kid.. couldnt talk... so I clamed up. All my life I've been fighting that disability ( and other "challenges" re: learning, reading , writing, asthma , etc ) in terms of the "repercusions". Kids like me make fun of me cause I stutter...I can't fight back verbally and lash out physically... become a "maniac". Get kicked out of city schools etc... Trouble maker. Can't express myself, fight back with words....when kids are mean to me. After a while they dont matter much as if they are mean I just keep quiet and keep mouth shut and start "thinking" instead... how to keep on top of this person and not let things get crazy... meet the challenge.
Turns out I'm not stupid and at some point my being " quiet" becomes a positive thing.. peers start asking my advice.. I'm suddenly a " deep thinker" in their eyes. I go from being disabled ( stupid ) to being " a deep thinker" about the age of puberty... when nobody knows what they are doing anymore.
I start thinking about expressing myself some other way than talking.. like maybe draw pictures... paint stuff, do things to have fun with people that doesnt put me in the " limelight".. where I have to talk etc. More success follows this tendency to socialize and express myself... and I discover that chics like the strong silent type.
( I have been into gymnastics thru my fathers infactuation with it since age 2 -- which I think eventually ( inadvertantly ) " cured me " of many of my learning disabilities etc -- (talk to an OT about this and modern child development stuff to know what I mean here )
Meanwhile I am very fond of dogs as my family has dogs one after the other and I am one of their best friends. I find I can communicate with dogs better than I can communicate with people sometimes. This seems to be a problem in some cases with some people, but for me it never got crazy... where I " loved dogs " more than I " love people ". I have never loved any dog more than any person and shudder when I think of those who do. Those people who do have more problems than I ever had to deal with.
And now, after all these years ( I am now 60 ), working on movies and tv stuff etc as a crew person with some college fine art schooling ( eventual photo major ) to get me started, I got into this " editing " stuff... A program I can actually " use " on my mousey computer introduces me to a more " final product " than I ever had access to before.
BUT I don't shoot motion pic stuff, cant afford that - and never could before basically, and now I think about the triple threats and future of movies and tv as a business... as well as the tools ( in this case the editing programs in conjunction with the cameras ( arri, panavision etc ) ) and the desire to express something ...
This has to be ( if you want an audience ) ... " tell a story ". You could just put a camera on a rocket ( strap it to the rocket ) and shoot the takeoff etc and show that.. but you need a V.O. saying " well, I just shot off a rocket and this is what it looked like"...to bring the experience to the audience... or else IMO there is no story.
Which leads to what's going on now in the world of reality tv, episodic tv , some big movies, etc. Telling a story is more than showing you stuff that you just wouldnt have seen if you hadn't been there yourself. Telling a story is more like saying something that bridges the gap between your own experience of life and its challenges ( of being part of your neighborhood and making sense of your own childhood and being an adult now maybe ).. and what others also have gone through to get to the same conclusions....
This is the object of " expression" IMO, whether you can talk about it, draw pictures about it, or make music about it...
And the editing program is a tool to help do that.. it is not the end all or purpose of life or the " personal crusade" in the long run.
It's one reason scary snakes often shock people out of their desire for comfort and predictable living... makes you think about that one serpent in the garden of eden you create for yourself .... and IMO who cares what editing program you use to write that and shoot it ??

Steve Grisetti, the MOD of the Premiere Elements forum and co-founder of a video/photo/editing Web site, Muvipix, did a nice article, "Don't just make a movie - tell a story." His audience was more consumer video editors, than the folk that we see around here, but his points were well-made, and were embraced by many in the Muvipix community.
I think that too many, forget that concept - and I am talking Hollywood and NYC here. It's almost as if, when the story breaks down, they instinctively know to throw in a car chase, or big explosion.
I know that I cite it too often around The Lounge, but that was what I enjoyed most about the LOR trilogy. It told a story. Now, though I had some exposure to the story, when much younger, I have to admit that I never read Tolkien, though almost everyone, that I knew, was busy with every book. Still, I only knew some of the high points, and not much more. However, almost immediately, I was drawn into the story, and only wished that I did not have to wait so long between episodes. The FX were cool, and I am a technoid sort, but it was the story that hooked me. I had read several articles on the FX production, so WAS looking for some of that, but what I wanted was the story. This is one that I will buy the BD "Director's Cut" of, and do a marathon. I have seen each segment, maybe three times, but never back to back to back. I still need to fill in a few blanks, and an entire day of viewing should do that - no phone, no visitors, nothing but LOR.
As far as human communications, I can talk, even more than I write here, but only concerning things that I care about. I am horrible at "small talk," and would rather addrss an auditorium of 10,000, on something that matters to me, than talk about the weather to a single person at a fund raiser. Not that long ago, I was seated next to a potential donor at a charity dinner. I was rather dreading it, and when she mentioned that she did not drink (what, no wine?), I was worried. At some point, early in the evening, the subject turned to politics. Now, I usually am very quiet on my feelings, as they are not exaclty politically correct, and worry about hurting feelings, or making a scene. I fielded a question on Senatorial candidates, and just decided to answer from my heart. Her eyes lit up, and I did not notice that the event had ended. Her husband was standing, as was my wife, and we were talking politics, talk-radio, FoxNews, Senator John Kyl, Will Rogers and much more. I found that we were kindred spirits. Finally, our spouses pulled us apart, and we departed. We continued that conversation at 2 - 3 more events during "the season." One day, my wife informed me that she had just given $10M to the foundation - the largest single gift ever. At least she wasn't a screaming liberal, as I would surely have really messed up the deal... However, had it all been small talk, I would have found a reason to excuse myself and hide in the bar for a few hours.
Also, the way that our society has developed, I will smile, nod, and say "hello" to strangers on the street, but always leave it at that. I am sure that many walk past and think "he wasn't all that friendly." They are probably right, but at least I was pleasant to them and did not rob them! Heck, I will usually tell telemarketers, "No, but thank you for your generous offer on that time-share... "
Hunt

I am currently having trouble with an attached PDF fill-able form created in Acrobat being non savable in Reader

Hello, I was wondering if you would be able to help me out?
I am having trouble with my attached PDF fill-able form, I am creating a form that has a limit of one page so in order for more room in a certain field I have added a Hyperlink to an additional fill-able(secondary) form within the Parent document (primary fill-able form. The secondary form is inserted as an attachment into the Primary form. My problem is when I open this document up in Adobe Reader, the Primary fill-able form is savable but the attached Secondary form for which the hyperlink leads to is non-savable and is a must print only. Is there a way to make the Secondary form savable as well within the same document? or is there another way I could execute what it is I am trying to achieve?
Trying to save other as extended reader has not worked, also if I save the attachment file as an extended reader first I am unable to attach a return hyperlink back to the Parent document,
Help would be greatly appreciated please and thank you!

I can't say for certain without looking at the actual PDF but it does appear that they created one large text box over multiple lines. For a fillable form it may have been smarter to remove the lines and create a box with smaller text that supports multiple lines.
At any rate, nothing you can do about it with the free Reader (and depending on the security, maybe nothing with Acrobat either.)

I am currently having trouble with an attached PDF fill-able form...Help Please

Hello, I was wondering if you would be able to help me out?
I am having trouble with my attached PDF fill-able form, I am creating a form that has a limit of one page so in order for more room in a certain field I have added a Hyperlink to an additional fill-able(secondary) form within the Parent document (primary fill-able form. The secondary form is inserted as an attachment into the Primary form. My problem is when I open this document up in Adobe Reader, the Primary fill-able form is savable but the attached Secondary form for which the hyperlink leads to is non-savable and is a must print only. Is there a way to make the Secondary form savable as well within the same document? or is there another way I could execute what it is I am trying to achieve?
Help would be greatly appreciated please and thank you!

Here is the code, thought I had put it in the first time, guess not heh. Anyway, I converted the arrayList(accountList) to a String so that I could see the that element I am trying to index is in there, which it is. I also checked the file that i'm populating the arrayList from and it also has the element in it.
public static void getAccountNumbers() {
          accountList = LoadStoreAccounts.readCollectionObject();
          accountInfo = accountList.toString();
          JOptionPane.showMessageDialog(null, accountInfo);
          acctNumIndex = accountList.indexOf(accountNumber);
          acctIndex = String.valueOf(acctNumIndex);
          JOptionPane.showMessageDialog(null, "Index of accountNumber    is: " + acctIndex);

Mountin Lion has trouble with external monitors

Not so much a question as a shout-out. Since going to Mountain Lion, my pretty new (February this year) MacBook has been having no end of trouble with external monitors. I use it a lot with the clamshell closed with two different external monitors of two different sizes, one at home, one at work. It sometimes thinks the one is the other, or if I unplug the monitor in sleep, when I later open the clamshell, the screen stays black and I have to force a reboot with the power button. Never had these problems with exactly the same set-up in Lion. Sometimes it also refuses to find a connected monitor or projector, I have to pull the dangle and put it in again.

If memory serves, one of the 'flaws' with BM's hardware is that it will not convert on-the-fly. So if your sequence doesn't match what the TV is accepting, you get black.
For example, my TV will not accept 1080p, only 1080i, so working in a 1080p sequence would produce no image for me as the BM will only output exactly what's in the sequence, it can't convert my 1080p/24 sequence into 1080i/30 for output.
Now I'd expect your TV would have no trouble accepting a 720p signal but, maybe the above data will lead you down a path of investigation.

Trouble with Feedburner.

I'm having trouble with Feedburner.
I know this is not strictly connected to any Apple product, and it is not a iTunes problem... but I tryed to fix this since 4 days... without any result!
I'm the responsible for the website of my church, and I'm using Blogger for the blog, and Feedburner to produce the podcast link for iTunes. For the last 10 years I used it to produce a podcast for our church (in Italy). Had no trouble at all. Some days ago I tried to upload as usual our sunday podcast, but no media was created on the feed.
Looking at the XML source on Feedburner ther is no enclosure, while on the original post I put a media file storede on MediaFire (this one: http://www.mediafire.com/download/hgbgff4qptw2fy8/testimoniareanatale.mp3)
PodMedic says this: "Content Type reported: text/html; charset=UTF-8 Media enclosure not created because: The content type returned from your host server was a text type, not a binary media type. Podcast content should always return a binary media type, such as audio/mpeg for audio, or video/mpeg for video."
I tried all I could: stored file on a different storages (I normally use MediaFire), took all the other elements on the page connected to the feed that could interfere, checked several times if the media enclosure is mp3 (yes, and it works smootly on the blog), put the link straight on the blog page instead of on the title), piged and resync hundred of times... everything. But no solution at all. No media enclosure, they say.
I also tried to post an old media file which is working on a different post to see how Feedburner react: no media enclosure has been created even for this one.
There is anybody who struggled with the same issue?
My feed is:http://feeds.feedburner.com/blogspot/Allenatiallunit
The blog connected is: http://laveravite.blogspot.com
http://laveravite.blogspot.com/feeds/posts/default?max-results=36
Thanks to anyone who can help. Have a blessed Christmas!
Marco

None of your episodes work when subscribing. The media file URLs in the feed are Feedproxy ones, which lead to URLs in the same form as the one you quote above. These bring up a web page with links to download or play, not an .mp3 file.
Since the previous episodes appear in the feed it suggests that you originally had Mediafire set to provide a direct link to the feed but that you've somehow changed it to providing the page with the links, which won't work: then subsequently trying to add a new episode in Blogger has failed as it can't now see an mp3 file.
So you need to look into MediaFire. When you enter the URL for you media file into Safari it must play directly in Safari, not bring up a web page.

Pad string with leading blanks

Im having trouble with padding leading blanks...
String PRpty_no = "10";
String qsPRpty_no = null;
qsPRpty_no = "PRpty_no=\""+pad(PRpty_no, 5, true)+"\" AND ";
protected String pad(String origString, int requiredSize, boolean justRight){
String theString=origString;
if(justRight){
while(theString.length()<requiredSize){ theString=" "+theString; }
} else {
while(theString.length()<requiredSize){ theString=theString+" "; }
return theString;
Returns:
theString = " 10"
theString = " 10"
theString = " 10"
It only adds 1 blank. The loop is obviously finishing when theString.length=5.
If I replace " " with "0" the desired result comes back:
theString = "010"
theString = "0010"
theString = "00010"
What is the difference using " " to "0"?

Unfortunately not GreyMan, copyright and all that. In the end the strings get concatenated into an sql query then run:
String sql="SELECT PRupi FROM PRprop WHERE ("+qsPRpty_no+qsPRpty_suffix+qsPRroad_id+")";
Where PRpty gets pulled out from an earlier sql as "10" and qsPRpty needs to be " 10" not " 10".

Trouble with mounted partitions (root twice)

Since a few days ago, I'm experiencing troubles with my partitions, like / being mounted twice. I'm using systemd instead of Init, mtab is symlinked to /proc/self/mounts
df output:
rootfs 103212320 13629136 84340304 14% /
udev 10240 0 10240 0% /dev
run 10240 344 9896 4% /run
/dev/disk/by-uuid/11331a92-bb2a-4aa2-a376-de9c2d12d6a3 103212320 13629136 84340304 14% /
tmpfs 2011176 0 2011176 0% /dev/shm
tmpfs 2011176 176 2011000 1% /sys/fs/cgroup
tmpfs 2011176 0 2011176 0% /media
run 10240 344 9896 4% /var/lock
run 10240 344 9896 4% /var/run
/dev/sda1 369251368 61124056 289370348 18% /media/Akai-Data
As you can see, / is mounted twice.
my /proc/self/mounts looks like this (in fact, is):
http://pastebin.com/bLi22Cps
my partition layout inherit from the time where I had both Windows and Arch Linux installed (so I was low on free primary partitions) is: sda1 350 GB ext4, sda3 8 GB swap, sda4 98 GB ext4. So I have no /home and / in different partitions as sda1 is where I have all my data.
my /etc/fstab:
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
/dev/sda1 /media/Akai-Data ext4 defaults,realtime,data=writeback 0 2
/dev/sda3 swap swap defaults 0 0
/dev/sda4 / ext4 defaults,user_xattr,realtime,data=writeback 0 1
Also, my /tmp folder has not being cleaned in 5 days. ¿Does it not supposed to be cleaned at every boot/shutdown (I have booted few times in five days)?
So, my troubles here are:
/ is mounted twice, and /tmp is not being cleaned. Any clue on this?
Also, to me, my/proc/self/mounts seems weird, aside from the fact that I think there is why / is mounted twice. Could someone check that?
Thank you in advance.
Last edited by ethail (2011-05-10 16:34:09)

The only place I have found that is on my /boot/burg/burg.cfg file:
linux /boot/vmlinuz26-pf root=/dev/disk/by-uuid/11331a92-bb2a-4aa2-a376-de9c2d12d6a3 ro fastboot quiet logo.nologo resume=/dev/sda3 init=/sbi/e4rat-preload
But as far as I can remember, that has been always there since I started using burg instead of grub (half of a mont ago, maybe more). And never got troubles with that.
Also, rc.local has everything comented out
EDIT: have I to assume that the burg entry is leading to troubles?
Last edited by ethail (2011-05-10 21:37:04)

Trouble with my mouse

For some time now I have been having trouble with the original mouse that came with my Mac G5. I've had this computer about 3 1/2 years. The mouse freezes up and I have to unplug it from the back of the monitor and replug it in and then it will work. When this happens the red light on the underside is still on. But then sometimes it quits working and the light is out. Do I have to get a new mouse or is there someway to correct this problem?

The most likely problem is a short-circuit somewhere along the mouse cord. This problem often occurs at the point where the cord enters the mouse body. Repeated flexing at that point causes the wires to fray internally, eventually leading to a short. Since the short is intermittent, if you unplug it and reconnect, it may work fine for a while, until the cord is flexed in a certain way and the short occurs again.
If this is the problem and if you are handy with a soldering iron (and this is the old "Pro" mouse before the Mighty Mouse), there was a web page with instructions on opening up mouse, making the cord a bit shorter (removing the worn section), and reconnecting the wires internally. I actually fixed an older Apple optical mouse this way. I don't remember the exact guide I used, but this one has the same procedure.
http://www.r3uk.com/index.php/tech-tips/34-disassembly-guides/39-apple-usb-pro-m ouse-disassembly
Otherwise, you can get a good replacement non-Apple mouse for $15 or less. I personally like the basic two buttons plus scroll-wheel optical mice made by Microsoft. They work fine with Apple's built-in USB mouse driver, so you don't need to install Microsoft's software. I currently use this one
http://www.amazon.com/Microsoft-K81-00004-Optical-Mouse-Blue/dp/B000068MP2

Trouble with webcam

Hi I am having trouble with my optia pro webcam. When it turns on it shadows with black and then progressively get's worse. I am using Windows Vista. Is there a link or download that will solve this problem. Thanks

Thanks for the replies, everyone.
I've made some progress. Like I said, before this problem occurred, I had to start my laptop's webcam software (CyberLink YouCam) before starting my .Net applications. If I failed to start YouCam, instead of a video feed I would receive an image from YouCam
instructing me to start YouCam. This is annoying because I have to run YouCam, which is not a light program, along with my stuff.
I wanted to find a way to run my .Net stuff on its own, so I began experimenting, which included uninstalling YouCam. After uninstalling, .Net couldn't get the video feed at all, so I reinstalled. This is when the weird error above appeared, but only for
SOME projects, oddly.
Last night I experimented further. I have three versions of Visual Studio on this system, so I pulled up 2010 to give it a try. Same issue. This lead me to believe the issue was not only outside of my code, but outside of project scope all together.
After a system restore to a point prior to uninstalling and reinstalling miserable YouCam, my video programs worked again, meaning I still have to start YouCam. It seems YouCam is monopolizing something, or maybe the un/reinstall messed something up.
The method I'm using from Emgu CV library is called Capture(), which creates an object to access the video feed. By default, it accesses the default camera. However, you can specify with an index a different camera. I'm suspicious that YouCam might be creating
a virtual webcam and making it the default, so perhaps if I specify a different index, I'll be able to access a camera directly.
Further thoughts are appreciated. Thanks.

I have been having a lot of trouble with the latest itunes update and my ipod classic 80Gb i.e. being unable to sync songs, but now i have no files at all on my ipod, it is completely blank when i view it from my computer. I need help, please, anybody.

As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK Computer Inc. K50IJ
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038B8600B98D1E0
Current user is not an administrator.
The current local date and time is 2014-03-21 16:52:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

Trouble with OR in where clause

Hello,
I'm having trouble with execution speed. The problem seems to be with using OR in my where clause.
Here's the meat of the function where i_pledge_number is an input parm:
BEGIN
SELECT /*+ INDEX (pp) */ SUM(pp.prim_pledge_amount)
INTO return_amount
FROM
primary_pledge pp
WHERE
-- Get total if multiple allocations
pp.prim_pledge_number IN
(SELECT pc.pledge_number
FROM pledge_codes pc
WHERE pc.pledge_code_type = 'M'
AND pc.pledge_code = 'AC'
AND lpad(pc.pledge_comment,10,'0') = i_pledge_number)
-- Get total if single allocation
OR pp.prim_pledge_number = i_pledge_number;
RETURN return_amount;
END;
If I comment out either half of the OR statement (either the subquery or the pp.prim_pledge_number = i_pledge_number half) the function returns a value in .02 seconds. If I leave the OR in, it takes 2.764 seconds to execute?? Can someone please show me a better way (faster) to do this? I tried using nvl() around the subquery but couldn't get it to compile.
Thanks

These things are difficult to diagnose remotely, but here is something you can try....
SELECT */ SUM(pp.prim_pledge_amount)
INTO return_amount
FROM   primary_pledge pp
WHERE pp.prim_pledge_number IN (SELECT pc.pledge_number
                                 FROM pledge_codes pc
                                 WHERE pc.pledge_code_type = 'M'
                                 AND pc.pledge_code = 'AC'
                                 AND lpad(pc.pledge_comment,10,'0') = i_pledge_number
UNION ALL
SELECT i_pledge_number FROM dual)
   RETURN return_amount;
END;If that doesn't do anything (and it might well not) there are a large number of different ways we can recast this query. To save us further guessing please give us more details: execution plans, database version number, volumetrics.
Cheers, APC

A trouble with "LIKE" in a select statement

Hi!
I'm having trouble with "LIKE" in a select statement...
With Access I can make the following and everything works well:
SELECT name, birthday
FROM client
WHERE birthday LIKE '*/02/*';
but if try to do it in my application (it uses Access), it doesn't work - I just can't understand that!!!
In my application the "month" is always the currently month taken from the "System". Look what I'm doing...
String query1 = "SELECT name, birthday " +
          "FROM client " +
          "WHERE birthday " +
          "LIKE '*/" +
          pMonth +
          "/*' " +
          "ORDER BY birthday ASC ";
ResultSet rs = statement1.executeQuery(consulta1);
boolean moreRecords = rs.next();
The variable "moreRecords" is always "false", the query returns nothing although the table "client" has records that attend the query.
Please, anyone can help me?! It's a little bit urgent.
Thanks,
Katia.

Hi Katia,
I'll bet the problem lies with the characters you're using to escape the LIKE clause. You're using the ones that Access likes to see, but that's not necessarily what's built into the JDBC-ODBC driver class.
You can find out what the correct escape wildcard characters are from the java.sql.DatabaseMetaData.getSearchStringEscape() method. It'll tell you what to use in the LIKE clause.
I'm not 100% sure about your code. It doesn't use query1 anywhere. I'd do this:
String query = "SELECT name, birthday FROM client WHERE birthday LIKE ? ORDER BY birthday ASC";
PreparedStatement statement = connection.createStatement(query);
String escape = connection.getMetaData().getSearchStringEscape();
String test = escape + '/' + pMonth + '/' + escape;
statement.setString(1, test);
ResultSet rs = statement.executeQuery();
while (rs.hasNext())
// load your data into a data structure to pass back.
rs.close();
statement.close();Let me know if that works. - MOD

Trouble with leading

Similar Messages

Maybe you are looking for