Trouble with Leopard and Clean Access Agent

I just got Leopard yesterday. I loaded it to my computer and all went well. Except when I tried to get on the internet (on my college campus that requires Cisco Clean Access) it wouldn't let me. I realize this is a third party software problem, but I was wondering if anyone else is dealing with this and had found a way around it.

its the same situation at my school (OSWEGO STATE), after a long heated discussion with the CTS department i still had no answer.
however this morning i was notified that Cisco is in no rush to update and may, if we're lucky update by the end of November.
i've decided to try and run a cable modem through my TV service, my CTS on campus has just screwed over Mac users for the past few years, and they have no motivation to stop and help us out.

Similar Messages

  • Iphoto trouble with Leopard and RAW pictures

    After installation of Leopard, iphoto 08 is unable to open RAW photographies in editing mode.
    Can you help me ?
    Thanks
    Régis

    Régis:
    Welcome to the Apple Discussions. How did you perform the Leopard upgrade? Did you do an Archive and Install without selecting the option to retain the user and internet settings? And are you using Photoshop for the RAW editing? Check in your HD/Library folder for a folder titled ScriptingAdditions. It gets removed when when you do a A&I without those options being selected. Can you open Photoshop and use it outside of iPhoto? If so then forget what I just wrote as it is not a possible reason.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Removing Cisco Clean Access Agent 4.5 (CCA)

    I'm more or less having trouble with uninstalling Cisco Clean Access Agent 4.5.0.0, so I can install CCA 4.1...
    I removed CCAAgent 4.5 + the files within "Library/ApplicationSupport/" and in "Library/Receipts"...yet when I try to install 4.1, it tells me there's a newer version of the software on this disk & won't let me install.
    I am on Snow Leopard, too - by the way.
    Any solutions to this?

    Tim:
    Seen this page yet....anything there help?
    http://www.cisco.com/en/US/docs/security/nac/appliance/configurationguide/45/cam/magntd.html#wp1276391
    Do you have a fresh backup if needed? Have you tried repairing permissions and checking for hidden files with a similar name?

  • Mac OS X Leopard Fails with Clean Access Agent

    Hey All,
    I've had several students in my office saying that Leopard and Clean Access don't work together. I haven't seen a specific error, yet, but was wondering if anyone else is seeing this problem...?
    I'm using the 4.1.2.0 agent for Macs.
    Mike

    I am at Cal Poly SLO and we have this error "Agent user operating system is not supported" Part of our system has been changed back to allowing Mac users to Authenticate using the web browser instead of the agent. That should work until cisco updates the agent

  • Problem with Clean Access Agent and Windows Updater

    I have a problem with a laptop when using Cisco Clean Access Agent. The agent keeps directing the laptop to get updates from the Windows Update site, but when I have connected the laptop via cable, windows updates tells me there are no updates either essential or optional. The laptop is a Sony VIVO VGN-FJ270 running XP Home Edition SP2 and the Clean Access Agent is version 4.0.2.1
    Any help is appreciated!!

    Verify the allowed hosts in CCA agent.
    Try these link:
    http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html
    http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml

  • Clean access agent keep on running again and again

    Added some registry checks in NAC 4.5 after that Clean access Agent keeps on running again and again on the client(looping)
    Thanks

    Philip,
    Windows 7 wasn't supported with CCA till 4.7.x and agents also have to be 4.7.x
    Best approach would be to get to a supported version and then if that doesn't work we can work with you to see what might be causing this.
    HTH,
    Faisal

  • Different between cisco NAC agent and cisco Clean Access Agent

    Hi all,
    if anyone has idea about different between cisco NAC agent and cisco Clean Access Agent, please share your ideas.
    thank you

    In 4.6, the agent was overhauled and is now called the NAC agent.  Previous versions were referred to as the Clean Access Agent.  So pretty much, the 4.5 agent and 4.1.3.2 agents are Clean Access agents, and the 4.6.x and 4.7.x agents are called NAC agents.
    Some of the changes made were moving a lot of the agent configuration to an XML file, redesigning the GUI, adding a service portion (so that the stub agent is no longer required), and better agent logging.

  • Clean Access Agent in Windows 8, 64 bit

    Hey guys,
    I posted this on another Cisco community site, someone there suggested I try here. He also gave me this page as a possible solution but I'm unable to download from the page as I don't have a service contract, I'm just a Dad trying to get his kid's computer online at school.
    http://www.cisco.com/cisco/software/release.html?mdfid=282855549&flowid=34712&softwareid=282573326&release=4.8.3&relind=AVAILABLE&rellifecycle=&reltype
    Kind of at our wit's end here. My daughter is at Mass Art in Boston with a nearly new computer (6 months old at most) with Windows 8 Pro and the Clean Access Agent isn't letting her connect saying she has no updated AV installed. However, we did have BitDefender installed and updated and I've seen BitDefender on a Cisco list on line somewhere, the tech department at the school also said that it should work. Thinking there might be a conflict with BitDefender and Windows Defender we uninstalled BitDefender but to no avail, the agent still won't allow access.
    Now the tech dept. at the school is telling her she has to reformat her hard drive (Ha!!) which is simply and completely unacceptable.
    Does anyone here know if the above link may solve our problem?
    Can someone send me the necessary files?
    Is there someone the school tech people can contact for this?
    Am I asking enough annoying questions?
    Many thanks for your time,
    Ken

    Hello Ajay,
    When I try to download either the "4.8.3 Patch for Windows 8 support" or the "4.8.3 Patch for Windows 8 Official support" it says I need a service contract. Which, of course, I don't have. I'm just a Dad trying to get his kids computer connected to the school's network!
    Do you know what the difference is between the "4.8.3 Patch for Windows 8 support" and the "4.8.3 Patch for Windows 8 Official support" downloads?
    Might you be able to email me what I need to [email protected]?
    I don't know how all of this works between the school and Cisco but if you can't send it to me might it be something the tech support people at the school can download? I would have to guess they do, indeed, have a service contract.
    Thanks again,
    Ken

  • Cisco Clean Access Agent patch?

    I just upgraded to Snow Leopard today without realizing that my campus uses Cisco's Clean Access Agent to allow access to the network. Every time I try to log in log in it tells me "Agent user operator system not supported." It is version 4.6.0.3. I realize now that this is not a campus problem, but more likely a program problem. Is there any word on a way around this or a patch in the near future?
    Thanks.

    The same issue occurred on my campus. Cisco claims they will fix the problem between 3 and 90 days.

  • Clean Access Agent Windows XP permission/Rights Issue

    Hi,
    I have a problem with Clean Access Agent.
    When a domain user installs the agent on the computer, only that user is able to login into the network using the CCAgent. Any other user who tries to login in on the same machine gets an error. In short, only the DOMAIN USER who installed the agent authenticates without a problem (or a user with administrative rights)
    The error that the second user gets is the same as the one here;
    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40.1ddf8b7d
    I am not sure if this problem is related to this one;
    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40.1ddfc848
    Anybody with ideas?
    Edd

    One quick fix could be to try restarting the HTTPD services. Although there should be no conflict if you install CSA and CCA, but you can uninstall CSA and check if other users are able to login on the same machine.

  • I am having all kinds of trouble with itunes and updating my ipad. when I open up itunes, it seems to just sit there, never going to itunes store. when I connect my ipad, I check update and it starts, but then I get this message:backup can't be saved on

    I am having all kinds of trouble with itunes and updating my ipad. I open itunes up but it doesn't do anything except open to a blank screen. I try to access the itunes store but it won't go there. When I connect my ipad, and try to update it, it starts and then I get a message that says backup cannot be saved on this computer. I have tried everything suggested to no avail. This is the 2nd or 3rd time I have had problems with itunes. Sometimes I even get a message that I am not connected to the internet.
    I have uninstalled and re-installed. Any help?

    You might not have enough space left on your hardrive.

  • Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

    Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

    Hi FuzzyDunlopIsMe,
    Welcome to the Support Communities!
    It's possible that resetting your password multiple times has triggered this security.  Click on the link below for assistance with your Apple ID Account:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Here is some additional information regarding your Apple ID:
    Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
    http://support.apple.com/kb/ts2446
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622
    Click on My Apple ID to access and edit your account.
    Cheers,
    - Judy

  • Nac appliance - clean access agent report

    Hi,
    I have been searching a lot, and I don't find any good explanation about how the clean access agent report works. I experienced that not all agent activity will be reported. Sometimes it showed up report about the "passed" and "failed" agent, but not at another time. Would someone give me explanation about when the agent will show up reports and it will not ? or did it show bugs ?
    Thanks in advance.

    Hi,
    does anybody experience this ? or Everything is going fine on your NAC ? I am using NAC 4.1.3.1.
    Thanks.

  • NAC Clean Access Agent Issue

    Hi,
    Can anyone tell me that If I want my user to download clean access agent so how can I achieve that...I have uploaded agent to my CAM but Im confused that should my user use web agent first then download the agent over network or he can download Clean agent directly ?

    Unlike the Clean Access Agent, the Cisco NAC Web Agent is not a "persistent" entity, thus it only exists on the client machine long enough to accommodate a single user session. Instead of downloading and installing an Agent application, once the user opens a browser window, logs in to the NAC Appliance web login page, and chooses to launch the temporal Cisco NAC Web Agent, an ActiveX control or Java applet (you specify the preferred method using the Web Client (ActiveX/Applet) option in the Administration > User Pages > Login Page configuration page) initiates a self-extracting Agent Stub installer on the client machine to install Agent files in a client's temporary directory, perform posture assessment/scan the system to ensure security compliance, and report compliance status back to the NAC Appliance system. During this period, the user is granted access only to the Temporary Role and if the client machine is not compliant for one or more reasons, the user is informed of the issues preventing network access and may do one of the following as mentioned in the below URL:
    http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/45/cam/m_cca.html#wp1130212

  • CISCO CLEAN ACCESS AGENT ALWAYS POPS-UP EVEN ALREADY AUTHENTICATED

    Hello,
    Just wonder why clean access agent always pops-up even already authenticated. Please how can i eliminate those multiple pops-up?
    thank you and best regards,
    Edwin

    Hi:
    I have the same issue. Would you please tell me what you did exactly?
    I am using OOB VGW mode.
    NAC version is 4.7.2
    Switch configurations:
    snmp-server community RO RO
    snmp-server community RW RW
    snmp-server location LOCATION
    snmp-server contact CONTACT
    snmp-server enable traps snmp linkdown linkup
    snmp-server enable traps mac-notification change move threshold
    snmp-server host CAM_IP version 2c RW  mac-notification snmp
    mac address-table notification change interval 0
    mac address-table notification change
    mac address-table aging-time 3600

Maybe you are looking for

  • Disk Utility can't repair disk...Can I still create a new image to back up?

    Two days ago my computer died and I haven't been able to get past the Apple screen since. I've tried starting in Safe mode, etc. that did not work. I just started up using my installation disk and got into Disk Utility. It says it cannot repair the d

  • Client showing it doesn't have client installed, but it does

    I have clients out at a secondary site that I've done a push install to.  when I do a push install to the client I can see the server create the request and pass it on to the client, the client then receives the request and in the log files I see it

  • Errors of BEA-101147 during shutdown if a managed server form a cluster

    Hi there,           We have a cluster with two machines running one managed server on each. Acces to these servers is made with mod_wl.so on Apache. The problem we´re having is: when I shutdown one of the managed servers it seems to undeploy the web

  • Anyone know where IPHOTO keeps the faces names

    I used IPHOTO faces so I could print sets of photographs by person - to send out to those who did not have a copy. These are scanned in pictures - which include people it took awhile to match up. As you cannot print the pictures with the legend of wh

  • Hi----------shipment creation problem...........

    hi, i have a issue in transportation which deals with transferring of amount to the respective G/L account. actually three C's has to come then only billing can be done for that particular shipment. those three C's are 1. calculated C fully calculate