Trouble with Line Level....

This is an odd one, but I'm hopeful.
Last fall I got a new Jeep Grand Cherokee and it has an in line FM modulator to connect my iPod. I haven't used it much but I do know it worked previously. Recenly it's stopped working because the level coming out of the connector seems to be too low; or that is my impression.
What happens is:
1) you have to turn the volume up really loud (75-85% max) to listen to anything.
2) Any time the music gets low (begining of songs, between songs, quite parts, etc) the modulator turns off. Once the level is high enogh again for ~5 seconds it turns back on.
As I said, I know this worked once as I'm using the same iPod and the same play lists. Since the dealer is clueless on this type of thing I'm trying to figure this out myself. What I'm hoping is someone here knows of a way to test the Line-level from the iPod to determin if the volume is coming out ok from there. Or ideally a way to set the volumn that somesfrom the connector.
Thaks in advance.

You may have already tried this, but the 1st thing I'd do is plug the line into another compatible device, like a boom box or home stereo (you may need some type of cheap adapter). If you don't have one, I'd take the iPod to an Apple store or some other store that sells a lot of accessories and try it on their accessories. One of these methods should help you determine whether the problem is with your iPod.

Similar Messages

  • Any car charger with line level dock RCA outputs?

    Hello,
    My new car has RCA aux input jacks. I am looking for a car charger that will plug into a standard cigarette lighter type plug that also has the dock line level output with RCA plugs so I can keep the iPod charged and hook it up to RCA. I'm not interested in a headphone jack based RCA plug since that's not the line level out.

    Found it cheap! $28.88
    Roadshow Cable
    PowerMac G5 Dual 2.5 Ghz   Mac OS X (10.4.9)  

  • Trouble with line spacing and text flow in Indesign 6

    Hello everyone. I'm a graphic artist working with magazine layout new to Indesign. I've used Quark for years and recently came across this problem...
    Within a paragraph we'll usually use a soft return to bump certain words to the next line. However, there are occassions I'm noticing that by doing this the lines ABOVE where I'm bumping the word change and reflow. I've never had an issue with this before and it causes a serious problem for us. Is this a setting I have on that I'm not aware? What can I do to avoid this happening?
    Thank you for any input or advice.

    It's one of the major differences between Quark and ID.
    ID has a "paragraph composer" as will as a single line composer like Quark's, and it's on by default. When you use the paragraph composer the text is constantly analyzed and spacing adjusted for the best fit and appearance (according to the spacing algorithm and your justification settings) for the entire paragraph. If you force a line break, ID may adjust all the lines above as well as the lines that follow.
    If this is a "serious problem" you shoud probably witch to the single line composer. You'll find a drop down for it in the paragraph style definitin dialog under the Justification settings, or you can change an individual paragraph as a local override from the Control panel flyout menu.
    Most of us whove been ID users for some time find the paragraph composer to be one of the strenghts of ID, and feel it generates nicer looking text than a single line composer.

  • Reg Exp help needed (trouble with line breaks)

    Hello,
    I am attempting to parse a line of text with regular expressions. I am having difficulty with the line breaks.
    I want to divide the following line by the first '\n' char.
    For instance, I wan the output to be as follows:
    found 1: one
    found 2: ddd
    dddHowever, I get the following with my attached code:
    found 1: one
    found 2: dddHowever, the second line break seems to be the end of the second group.
    How do I get the any character '.' to read past any subsequent line breaks?
    import java.util.regex.*;
    public class Test
         String rawSequenceArg = ">one\nddd\nddd";     
           Pattern p = Pattern.compile(">([^\n]+)\n(.+)");
           Matcher m = p.matcher(rawSequenceArg);
           if(m.find())
                System.out.println("found 1: " + m.group(1));
                System.out.println("found 2: " + m.group(2));
    }

    In this case, the DOTALL flag is the one you need; it allows the dot (period, full stop) to match line separator characters. MULTILINE makes the '^' and '$' anchors match the beginning and end of logical lines, instead of just the beginning and end of the input.

  • Trouble with line drawing

    Can somebody help me figure out why this isn't drawing a line? The code is in frame 1 by itself, and I'm not getting any errors.
    var brownLineDraw:Shape = new Shape();
    brownLineDraw.graphics.lineStyle(12, 0x352000, 1);
    brownLineDraw.graphics.moveTo(100, 100);
    brownLineDraw.graphics.lineTo(200, 200);
    Thanks!

    I figured it out, you have to add the line to the stage using, in this case:
    this.addChild(brownLineDraw);
    Hooray!

  • Recording line-level input with Griffin iMic

    I'm having trouble recording line-level input from a stereo system with a Griffin iMic. Even though all extraneous inputs have been deactivated, I'm still getting a slight feedback hum. There should be no extraneous noise whatsoever. I haven't done this in quite a while, so I've forgotten what I must do. Any help is apprreciated. Thanks very much. Peace,
    iBook G3, 1.42 Mac mini G4 DVD±RW   Mac OS X (10.3.9)   640Mb SDRAM, 1gb DDRAM

    I'm trying to digitize an audio cassette with
    Soundtrack Pro. My setup includes a Griffin iMic
    that goes to a USB port. The trouble I'm having is
    in controlling the input volume. The level meters
    indicate clipping, but I'm not clear how to set the
    input level.
    If it's in the Recording tab (>Input) with the Gain
    slider, mine is greyed out.
    M Wohlgy,
    (I know this is months after your post.)
    Control of the iMic volume is in the Preferences pane called "Sound". You can set the output and the input levels there.
    Remember the iMic's position switch works only for the imput, either close to the microphone icon for "microphone" or away from it for "line in".
    I use the iMic exclusively.
    David

  • Trouble with flash 8

    Hi all
    I'm using Flash 8 and I was saving the swf file in version
    Flash 7 because
    I was having trouble with line spacing with version 8. Now
    I'm getting this
    erre message.
    **Error** C:\Users\LD\AppData\Local\Macromedia\Flash
    8\en\Configuration\Classes\FP8\MovieClip.as: Line 36: The
    class or interface
    'flash.geom.Rectangle' could not be loaded.
    var scale9Grid:Rectangle;
    **Error** C:\Users\LD\AppData\Local\Macromedia\Flash
    8\en\Configuration\Classes\FP8\MovieClip.as: Line 51: The
    class or interface
    'flash.geom.Transform' could not be loaded.
    var transform:Transform;
    **Error** C:\Users\LD\AppData\Local\Macromedia\Flash
    8\en\Configuration\Classes\FP8\MovieClip.as: Line 55: The
    class or interface
    'flash.display.BitmapData' could not be loaded.
    function attachBitmap(bmp:BitmapData, depth:Number,
    pixelSnapping:String, smoothing:Boolean):Void;
    **Error** C:\Users\LD\AppData\Local\Macromedia\Flash
    8\en\Configuration\Classes\FP8\MovieClip.as: Line 59: The
    class or interface
    'flash.display.BitmapData' could not be loaded.
    function beginBitmapFill(bmp:BitmapData, matrix:Matrix,
    repeat:Boolean, smoothing:Boolean):Void;
    Total ActionScript Errors: 4 Reported Errors: 4
    thank you for the help

    Oh, OK, you likely have a file with a .dmg extension on it? You need to double-click that - it will mount on your Desktop looking like an external drive. Then you need to double-click the Install Flash Player app.
    This should actually install Flash Player and, after you restart Safari, your'll be able to watch video.
    Good luck,
    Clinton

  • PO with hundreds of multiple account assignment lines on service line level

    Hi, experts,
    I want to create a external service PO with multiple account assignment.
    However, in the service line item level, when I click on the multiple account assignment, I could only enter 97 lines. But I need to create around 1000 account assignment lines for a single service line.
    Is it possible to extend the no. of account assignment lines inside the service line level? May I know how to do so?
    Thanks & regards,
    James

    I'm facing a similar error. 
    What I think it's happening is that for technical reasons the program involved only delivers 99 line items... To make things worse, When you try to create an invoice for that full item you are going to get an error bc the invoice reserves line 99 for unplanned account assignments.
    The suggestion from SAP is to create further items with 98 account assignment items or less.
    Have a look at these notes: 486808, 651784
    Regards,
    Nelson
    PS: Please rewards points for helpful answers

  • Delivery block with confirm. block on schedule line level in sales order

    We customized a new delivery block with confirmation block.
    When using it in sales order header, it is working correctly: the availability check in APO gATP is executed; but as soon as I save the sales order, the confirmation quantity is set to zero.
    We now need to use this on schedule line level, not on header level. It is not working. Even after saving the confirmed quantity stays as filled by gATP availability check.
    What is wrong? SAP help / documentation officially describe that delivery block with confirmation block either works on header level or on schedule line level.
    Thanks in advance.
    Edited by: Schmidt on Aug 13, 2008 4:47 PM

    Please see if OSS notes 21584 and/or 19488 might help.
    Regards,
    Anisha.

  • Trouble with format of files exported from pages as .doc - when opened on a pc they have extra spaces and pages breaks inserted after each line?  Can be manually deleted, but defeats sharing purpose. advice?

    Hi all, I have trouble with the format of files exported by email as .doc from pages - when opened in MS word on a PC or other device, they have extra spaces and pages inserted after each line - can be deleted manually, but defeats sharing purpose.  Any advice?  Not the most sophisticated user.

    Got it. I tried booting with MOD_AUTOLOAD set to yes, and it was working fine. Looks like I needed to specify some more modules in my list.

  • Help with line-in levels, please

    I finally got round to plugging my bass into GB, via my iMonster cable. However, the line-in levels was way too high... I had to turn everything right down (both the internal input controls in sys prefs and the out put on my bass) - both were set at 1. And it was still distorting.
    Can anyone explain why this was happening, and what I need to do about it!!!!!
    The bass is a Wal and it's active!

    Hi guys, thanks for the input. It's definitely not the battery. Although that would indeed cause it to sound distorted, it wouldn't make it peak so badly on the line levels.
    I will try plugging something else in. But give me a couple of days as I just caught Chicken Pox off of one of my kids... so I'm not doing anything much as yet!
    Cheers

  • Anyone having trouble with computer running extremely slow with the color wheel continuously spinning.?

    Updated with Yosemite and think that's when my problems started with my IMac being very slow.  The color wheel keeps popping up and spinning not allowing me to move forward on typing or moving between websites etc.  Extremely slow and never had this problem before Yosemite.  Any real answers to this out there?  I was on the phone with apple support for two and a half hours the other day and it's not made any difference in what the tech had me do to resolve this issue.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1266 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 250 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n    "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<13;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^  |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"9\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"10\f%@d\f%s\f%d\f%d\n\",@d);printa(\"11\f%@d\f%s\f%d\f%d\n\",@e);printa(\"12\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |fmfd|Goog|ksho|ndum|obso|realp|rned f|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,user/$UID} -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {Daemons,Agents}\ {load,disabl}ed {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 83 114;j=$?;for i in 0 1;do ((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74;B7 11;B4 0 0 11;C3 23+2*i;D4 24+2*i 14 66+i 92+i;done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 84 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Line level noise (hiss)  in meters

    Should there be a level in the audio meters even when I am not capturing ? It's around the -24 to -30 db area.
    Thanks
    Tony B

    **** wrote:
    Well lowering your input impedance should help sonically with a ribbon but...
    The button on the preamp is set on "high".
    The mic specs says the mic impedance is <=200 ohms
    <div class="jive-quote">But what puzzles me is this:
    {quote:title=yattaman wrote:}On playback, I can here a noticeable difference - there is silence between the gaps of spoken words - there is "noise" under the spoken parts. It is not room noise.{quote}
    Do you have a way to use another interface?
    Only this preamp. Is the trouble with the USB Codec? I think I once saw a way to bypass the USB Audio Codec used by the preamp, and instead use the Mac "line in" setting while still using the preamp. Change the settings in the Sound Preference pane and/or Audio-MIDI Setup? Also, regarding Audio-MIDI Setup, no matter what I try, cannot make the 48000 setting stay enabled in Audio-MIDI Setup on the left side. It always reverts to 44000. I saw a thread here about it a year ago, and I guess this was never solved.
    As an aside Phantom Power itself will not hurt Ribbons. The issue is if pin 2 or 3 were to short to ground with Phantom Power on. I've left Phantom Power on many times with ribbons.
    The Nady manual (from here: http://www.nady.com/RSM4micspg.html) says phantom power will destroy the ribbon in this mic.)
    How about this:
    I decrease the preamp mic gain, and increase recording level in GB. And, can you confirm how to increase the recording level in GB? :-|

  • Relational access to XML Content: can not display line level details

    Hi folks,
    there is one record at the header level and two records at the line level in the xml data file. I created the following view and when i see the results, I see two records as expected but the value for the line level coloumns is null but there are some values for the containerid in the xml data file
    Here is the view and bellow that is my schema that i registered and the inserted the xml datafile into the default table specified in the schema .
    Can you please tell me whats wrong with this view.
    Thanks,
    Pradeep
    create or replace view myrcv_reccontainer_view as
    select m.header_id,a.*
    from RECEIVINGUPLOAD mr,
    XMLTABLE('/'
    PASSING object_value
    COLUMNS
    header_id varchar2(20) PATH '/WMWROOT/WMWDATA/WMFWUpload/Id',
    rec XMLType PATH '/WMWROOT/WMWDATA/WMFWUpload/Receipts/Receipt/ParentContainers/Parent/ReceiptContainers/ReceiptContainer'
    ) m,
    XMLTABLE( '/ReceiptContainer'
    PASSING m.rec
    COLUMNS
    cid varchar2(40) PATH 'ContainerId'
    ) a;
    <?xml version="1.0" encoding="utf-8"?>
    <xs:schema id="ReceivingUpload" targetNamespace="http://www.manh.com/ILSNET/Interface" elementFormDefault="qualified"
         xmlns="http://www.manh.com/ILSNET/Interface" xmlns:xs="http://www.w3.org/2001/XMLSchema" version ="2007"
         xmlns:xdb="http://xmlns.oracle.com/xdb"
         xdb:storeVarrayAsTable="true"
    >
         <xs:include schemaLocation="Item.xsd"/>
         <xs:include schemaLocation="InterfaceEntity.xsd"/>
         <xs:include schemaLocation="UploadGroup.xsd"/>
         <xs:include schemaLocation="SerialNumber.xsd"/>
         <xs:include schemaLocation="Address.xsd"/>
    <xs:include schemaLocation="ContainerType.xsd" />
         <xs:element name="WMWROOT" nillable="true" type="WMWROOT" xdb:defaultTable="RECEIVINGUPLOAD" xdb:SQLName="WMWROOT"/>
         <xs:complexType name="WMWROOT">
              <xs:sequence>
                   <xs:element minOccurs="0" maxOccurs="1" name="WMWDATA" type="WMWDATA" />
              </xs:sequence>
         </xs:complexType>
         <xs:element name="WMWDATA" nillable="true" type="WMWDATA" xdb:SQLName="WMWDATA"/>
         <xs:complexType name="WMWDATA">
              <xs:sequence>
                   <xs:element minOccurs="0" maxOccurs="1" name="WMFWUpload" type="WMFWUpload" xdb:SQLName="WMFWUpload" />
              </xs:sequence>
         </xs:complexType>
         <xs:element name="WMFWUpload" nillable="true" type="WMFWUpload" />
    <xs:complexType name="WMFWUpload">
    <xs:complexContent mixed="false">
    <xs:extension base="UploadGroup">
    <xs:sequence>
    <xs:element minOccurs="0" maxOccurs="1" name="Receipts" type="ReceiptList" xdb:SQLName="Receipts"/>
    </xs:sequence>
    </xs:extension>
    </xs:complexContent>
    </xs:complexType>
    <xs:complexType name="ReceiptList">
    <xs:sequence>
    <xs:element minOccurs="0" maxOccurs="unbounded" name="Receipt" nillable="true" type="Receipt" xdb:SQLName="Receipt"/>
    </xs:sequence>
    </xs:complexType>
    <xs:complexType name="Receipt">
    <xs:complexContent mixed="false">
    <xs:extension base="InterfaceEntity">
    <xs:sequence>
    <xs:element minOccurs="0" maxOccurs="1" name="Appointment" type="AppointmentSchedule" />
    <xs:element minOccurs="0" maxOccurs="1" name="ArrivedDate" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="BolNumAlpha" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="Carrier" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="CarrierService" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ClosedDate" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="Company" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="EndUnitizeDate" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="ErpOrderNum" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ErpOrderType" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="InternalRecNum" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="LaunchNum" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="LeadingSts" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="LeadingStsDate" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="LeadingStsFailed" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="LicensePlateId" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ManuallyEntered" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="PackingListId" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="Priority" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="ProNumAlpha" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ReceiptDate" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="ReceiptId" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ReceiptIdType" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ReceiptType" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ScheduledDate" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="SealId" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="StartUnitizeDate" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalContainers" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalCost" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalGreatPlainsQty" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalLines" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalListPrice" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalQty" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalValue" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalVolume" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalWeight" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="TrailerId" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="TrailingSts" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="TrailingStsDate" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="TrailingStsFailed" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="Vendor" type="Vendor" />
    <xs:element minOccurs="0" maxOccurs="1" name="VolumeUm" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="Warehouse" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="WeightUm" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="Details" type="ReceiptDetailList" />
    <xs:element minOccurs="0" maxOccurs="1" name="ParentContainers" type="ParentList" xdb:SQLName="ParentContainers" />
    <xs:element minOccurs="0" maxOccurs="1" name="ReceiptContainers" type="ReceiptContainerList" xdb:SQLName="ReceiptContainers"/>
    </xs:sequence>
    </xs:extension>
    </xs:complexContent>
    </xs:complexType>
    <xs:complexType name="Vendor">
    <xs:complexContent mixed="false">
    <xs:extension base="InterfaceEntity">
    <xs:sequence>
    <xs:element minOccurs="0" maxOccurs="1" name="Company" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ShipFrom" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ShipFromAddress" type="Address" />
    <xs:element minOccurs="0" maxOccurs="1" name="Source" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="SourceAddress" type="Address" />
    <xs:element minOccurs="0" maxOccurs="1" name="VerifyUm" type="xs:string" />
    </xs:sequence>
    </xs:extension>
    </xs:complexContent>
    </xs:complexType>
    <xs:complexType name="ReceiptContainer">
    <xs:complexContent mixed="false">
    <xs:extension base="InterfaceEntity">
    <xs:sequence>
    <xs:element minOccurs="0" maxOccurs="1" name="ContainerId" type="xs:string" xdb:SQLName="ContainerId"/>
    <xs:element minOccurs="0" maxOccurs="1" name="ContainerClass" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ContainerType" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ConvQty" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="ConvUm" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="DimensionUm" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="DispCode" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="EPC" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ExpDate" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="FromLoc" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="FromWhs" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="Height" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="IncomingPd" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="InterfaceRecId" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="InternalLocContNum" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="InternalRecContNum" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="InventorySts" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="LaunchNum" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="Length" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="LocatingRule" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="Lot" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ManufacturedDate" type="xs:dateTime" />
              <xs:element minOccurs="0" maxOccurs="1" name="OutPd" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="QcInspection" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="Qty" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="QtyUm" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ReasonCode" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ReceiptDetail" type="ReceiptDetail" />
    <xs:element minOccurs="0" maxOccurs="1" name="SerialNumbers" type="SerialNumberList" />
    <xs:element minOccurs="0" maxOccurs="1" name="Status" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="StatusFailed" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ToLoc" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ToWhs" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="UploadInterfaceBatch" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="URI" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="UsedByImmNeed" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="Weight" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="Width" type="xs:decimal" />
    </xs:sequence>
    </xs:extension>
    </xs:complexContent>
    </xs:complexType>
    <xs:complexType name="ReceiptDetail">
    <xs:complexContent mixed="false">
    <xs:extension base="InterfaceEntity">
    <xs:sequence>
    <xs:element minOccurs="0" maxOccurs="1" name="ConvHeight" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="ConvLength" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="ConvQty" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="ConvUm" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ConvWeight" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="ConvWidth" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="Cost" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="CustomerOrderNum" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ErpOrderLineNum" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="ErpOrderNum" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ErpOrderType" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ExpectedInvSts" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ExpDate" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="HazCode" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="InterfaceRecId" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="InternalRecLineNum" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="InvSts" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="GreatPlainsQty" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="ManufacturedDate" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="OpenQty" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="OriginalQty" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="Priority" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="PurchaseOrderDetailId" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="PurchaseOrderLineNumber" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="PurchaseOrderId" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="PutListNum" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="PutLoc" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="PutZone" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="SerialNumReqd" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="SKU" type="SKU" />
    <xs:element minOccurs="0" maxOccurs="1" name="StatusFlowName" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalCost" type="xs:decimal" />
    </xs:sequence>
    </xs:extension>
    </xs:complexContent>
    </xs:complexType>
    <xs:complexType name="Parent">
    <xs:complexContent mixed="false">
    <xs:extension base="InterfaceEntity">
    <xs:sequence>
    <xs:element minOccurs="0" maxOccurs="1" name="ContainerId" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ContainerType" type="ContainerType" />
    <xs:element minOccurs="0" maxOccurs="1" name="EPC" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="FromLoc" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="FromWhs" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="InternalRecContNum" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="InventorySts" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="LocatingRule" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="QcInspection" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="Status" type="xs:int" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalQty" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="TotalWeight" type="xs:decimal" />
    <xs:element minOccurs="0" maxOccurs="1" name="ReceiptContainers" type="ReceiptContainerList" />
    <xs:element minOccurs="0" maxOccurs="1" name="StatusFailed" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ToLoc" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="ToWhs" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="URI" type="xs:string" />
    <xs:element minOccurs="0" maxOccurs="1" name="WeightUm" type="xs:string" />
    </xs:sequence>
    </xs:extension>
    </xs:complexContent>
    </xs:complexType>
    <xs:complexType name="ReceiptContainerList">
    <xs:sequence>
    <xs:element minOccurs="0" maxOccurs="unbounded" name="ReceiptContainer" nillable="true" type="ReceiptContainer" xdb:SQLName="ReceiptContainer"/>
    </xs:sequence>
    </xs:complexType>
    <xs:complexType name="AppointmentSchedule">
    <xs:complexContent mixed="false">
    <xs:extension base="InterfaceEntity">
    <xs:sequence>
    <xs:element minOccurs="0" maxOccurs="1" name="ApptDateTime" type="xs:dateTime" />
    <xs:element minOccurs="0" maxOccurs="1" name="Dock" type="xs:string" />
              <xs:element minOccurs="0" maxOccurs="1" name="EndDateTime" type="xs:dateTime" />
              <xs:element minOccurs="0" maxOccurs="1" name="ObjectId" type="xs:int" />
              </xs:sequence>
    </xs:extension>
    </xs:complexContent>
    </xs:complexType>
    <xs:complexType name="ReceiptDetailList">
    <xs:sequence>
    <xs:element minOccurs="0" maxOccurs="unbounded" name="ReceiptDetail" nillable="true" type="ReceiptDetail" />
    </xs:sequence>
    </xs:complexType>
    <xs:complexType name="ParentList">
    <xs:sequence>
    <xs:element minOccurs="0" maxOccurs="unbounded" name="Parent" nillable="true" type="Parent" xdb:SQLName="Parent" />
    </xs:sequence>
    </xs:complexType>
    </xs:schema>

    Thanks for your response.
    Glad to hear that you are getting the data.
    Here is the output iam getting; Note: CID is null
    =========================
    HEADER_ID,CID
    81b1d486-f5ec-461d-a,
    81b1d486-f5ec-461d-a,
    ======================
    here is the sample data.
    ============================
    <?xml version="1.0" encoding="utf-8" ?>
    - <WMWROOT xmlns="http://www.manh.com/ILSNET/Interface">
    - <WMWDATA>
    - <WMFWUpload xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <Date>2010-01-27T09:32:29.35096-05:00</Date>
    <GroupIndex>1</GroupIndex>
    <Id>81b1d486-f5ec-461d-a204-c8a4543ed888</Id>
    <NumGroups>1</NumGroups>
    <NumRecs>1</NumRecs>
    - <Receipts>
    - <Receipt>
    <CreationDateTimeStamp>2010-01-27T09:23:58</CreationDateTimeStamp>
    <CreationProcessStamp>lmenghani</CreationProcessStamp>
    <DateTimeStamp>2010-01-27T09:32:09.633</DateTimeStamp>
    <InterfaceRecordId />
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ArrivedDate>2010-01-27T09:25:39</ArrivedDate>
    <ClosedDate>2010-01-27T09:32:09.633</ClosedDate>
    <InternalRecNum>38</InternalRecNum>
    <LaunchNum>0</LaunchNum>
    <LeadingSts>900</LeadingSts>
    <LeadingStsDate>2010-01-27T00:00:00</LeadingStsDate>
    <LeadingStsFailed>N</LeadingStsFailed>
    <ManuallyEntered>Y</ManuallyEntered>
    <Priority>0</Priority>
    <ReceiptDate>2010-01-27T00:00:00</ReceiptDate>
    <ReceiptId>TESTRECPTUPLOAD</ReceiptId>
    <ReceiptIdType>Packing List ID</ReceiptIdType>
    <StartUnitizeDate>2010-01-27T09:25:39</StartUnitizeDate>
    <TotalContainers>1</TotalContainers>
    <TotalCost>0.00000</TotalCost>
    <TotalGreatPlainsQty>0.00000</TotalGreatPlainsQty>
    <TotalLines>1</TotalLines>
    <TotalListPrice>0.00000</TotalListPrice>
    <TotalQty>10.00000</TotalQty>
    <TotalValue>0.00000</TotalValue>
    <TotalVolume>10.00000</TotalVolume>
    <TotalWeight>10.00000</TotalWeight>
    <TrailingSts>900</TrailingSts>
    <TrailingStsDate>2010-01-27T00:00:00</TrailingStsDate>
    <TrailingStsFailed>N</TrailingStsFailed>
    - <Vendor>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <ShipFrom>1234</ShipFrom>
    - <ShipFromAddress>
    <Address1>Australia Business Unit</Address1>
    <City>Sydney</City>
    <Country>US</Country>
    <Name>Australia Business Unit</Name>
    <PostalCode>30339</PostalCode>
    <State>GA</State>
    </ShipFromAddress>
    <Source>1234</Source>
    - <SourceAddress>
    <Address1>Australia Business Unit</Address1>
    <City>Sydney</City>
    <Country>US</Country>
    <Name>Australia Business Unit</Name>
    <PostalCode>30339</PostalCode>
    <State>GA</State>
    </SourceAddress>
    </Vendor>
    <VolumeUm>IN3</VolumeUm>
    <Warehouse>Moreno Valley</Warehouse>
    <WeightUm>LB</WeightUm>
    + <Details>
    - <ReceiptDetail>
    <DateTimeStamp>2010-01-27T09:27:08</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvHeight>0.00000</ConvHeight>
    <ConvLength>0.00000</ConvLength>
    <ConvQty>0.00000</ConvQty>
    <ConvWeight>0.00000</ConvWeight>
    <ConvWidth>0.00000</ConvWidth>
    <ErpOrderLineNum>1.00000</ErpOrderLineNum>
    <InternalRecLineNum>46</InternalRecLineNum>
    <GreatPlainsQty>0.00000</GreatPlainsQty>
    <OpenQty>0.00000</OpenQty>
    <OriginalQty>10.00000</OriginalQty>
    <Priority>0</Priority>
    <PurchaseOrderLineNumber>0.00000</PurchaseOrderLineNumber>
    <PutListNum>0</PutListNum>
    <SerialNumReqd>Y</SerialNumReqd>
    - <SKU>
    <DateTimeStamp>2010-01-27T09:27:08</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <Active>Y</Active>
    <AvailableOnWeb>N</AvailableOnWeb>
    <BomAction>N</BomAction>
    <CatchWeightReqd>N</CatchWeightReqd>
    <Cost>0.00000</Cost>
    <DaysToExpire>0</DaysToExpire>
    <Desc>ITEMA</Desc>
    <GtinEnabled>N</GtinEnabled>
    - <HarmCode>
    <RecordType>HARMONIZED</RecordType>
    </HarmCode>
    <Item>ITEMA</Item>
    <ItemCategories />
    - <ItemClass>
    <StorageTemplate />
    </ItemClass>
    <ImmediateNeedsEligible>N</ImmediateNeedsEligible>
    <InboundQcAmount>0.00000</InboundQcAmount>
    <InboundQcEligible>N</InboundQcEligible>
    - <ItemTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    </ItemTemplate>
    <InternalItemNum>22</InternalItemNum>
    <InventoryTracking>Y</InventoryTracking>
    <ListPrice>0.00000</ListPrice>
    <LotControlled>N</LotControlled>
    <NetPrice>0.00000</NetPrice>
    - <Nmfc>
    <RecordType>NMFC</RecordType>
    </Nmfc>
    <Producer>N</Producer>
    <SerialNumTrackInbound>Y</SerialNumTrackInbound>
    <SerialNumTrackInventory>Y</SerialNumTrackInventory>
    <SerialNumTrackOutbound>Y</SerialNumTrackOutbound>
    - <StorageTemplate>
    <DateTimeStamp>2001-06-12T17:07:39</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>System</UserStamp>
    <Active>Y</Active>
    <Desc>Default Storage Template</Desc>
    - <Details>
    - <StorageTemplateDetail>
    <DateTimeStamp>2010-01-06T09:47:29</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <Active>Y</Active>
    <GroupDuringUnitize>Y</GroupDuringUnitize>
    <Sequence>1</Sequence>
    <TreatFullPct>100</TreatFullPct>
    <Um>EA</Um>
    </StorageTemplateDetail>
    - <StorageTemplateDetail>
    <DateTimeStamp>2010-01-03T17:25:16</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <Active>N</Active>
    <GroupDuringUnitize>N</GroupDuringUnitize>
    <Sequence>2</Sequence>
    <TreatFullPct>100</TreatFullPct>
    <Um>CS</Um>
    </StorageTemplateDetail>
    - <StorageTemplateDetail>
    <DateTimeStamp>2001-06-12T17:26:35</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>System</UserStamp>
    <Active>N</Active>
    <GroupDuringUnitize>N</GroupDuringUnitize>
    <Sequence>3</Sequence>
    <TreatFullPct>100</TreatFullPct>
    <Um>PL</Um>
    </StorageTemplateDetail>
    </Details>
    <Template>*Default</Template>
    </StorageTemplate>
    - <UOMS>
    - <UOM>
    <DateTimeStamp>2010-01-13T10:54:26</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvQty>1.00000</ConvQty>
    <DimensionUm>IN</DimensionUm>
    <EPCPackageID>0</EPCPackageID>
    <Height>1.00000</Height>
    <InternalItemUm>13</InternalItemUm>
    <Length>1.00000</Length>
    <QtyUm>EA</QtyUm>
    <Sequence>1</Sequence>
    <TreatAsLoose>Y</TreatAsLoose>
    <TreatFullPct>100</TreatFullPct>
    <Weight>1.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>1.00000</Width>
    <SlottingID />
    <SlottingPalletTI>0</SlottingPalletTI>
    <SlottingPalletHI>0</SlottingPalletHI>
    </UOM>
    - <UOM>
    <DateTimeStamp>2010-01-13T10:54:37</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvQty>5.00000</ConvQty>
    <DimensionUm>IN</DimensionUm>
    <EPCPackageID>0</EPCPackageID>
    <Height>5.00000</Height>
    <InternalItemUm>14</InternalItemUm>
    <Length>5.00000</Length>
    <QtyUm>CS</QtyUm>
    <Sequence>2</Sequence>
    <TreatAsLoose>N</TreatAsLoose>
    <TreatFullPct>100</TreatFullPct>
    <Weight>5.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>5.00000</Width>
    <SlottingID />
    <SlottingPalletTI>0</SlottingPalletTI>
    <SlottingPalletHI>0</SlottingPalletHI>
    </UOM>
    - <UOM>
    <DateTimeStamp>2010-01-13T10:54:50</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvQty>10.00000</ConvQty>
    <DimensionUm>IN</DimensionUm>
    <EPCPackageID>0</EPCPackageID>
    <Height>10.00000</Height>
    <InternalItemUm>15</InternalItemUm>
    <Length>10.00000</Length>
    <QtyUm>PL</QtyUm>
    <Sequence>3</Sequence>
    <TreatAsLoose>N</TreatAsLoose>
    <TreatFullPct>100</TreatFullPct>
    <Weight>10.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>10.00000</Width>
    <SlottingID />
    <SlottingPalletTI>0</SlottingPalletTI>
    <SlottingPalletHI>0</SlottingPalletHI>
    </UOM>
    </UOMS>
    <BaseQty>10.00000</BaseQty>
    <BaseQtyUm>EA</BaseQtyUm>
    <ConvertedQty>1</ConvertedQty>
    <ConvertedQtyUm>PL</ConvertedQtyUm>
    <DimensionUm>IN</DimensionUm>
    <Height>1.00000</Height>
    <Length>1.00000</Length>
    <Quantity>10.00000</Quantity>
    <QuantityUm>EA</QuantityUm>
    <TotalListPrice>0.00000</TotalListPrice>
    <TotalValue>0.00000</TotalValue>
    <TotalVolume>10.00000</TotalVolume>
    <TotalWeight>10.00000</TotalWeight>
    <Value>0.00000</Value>
    <Volume>1.00000</Volume>
    <VolumeUm>IN3</VolumeUm>
    <Weight>1.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>1.00000</Width>
    </SKU>
    <TotalCost>0</TotalCost>
    </ReceiptDetail>
    </Details>
    - <ParentContainers>
    - <Parent>
    <DateTimeStamp>2010-01-27T09:32:09.757</DateTimeStamp>
    <InterfaceRecordId />
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ContainerId>PLTEST</ContainerId>
    - <ContainerType>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <Desc>Pallet</Desc>
    <Height>0.00000</Height>
    <Length>0.00000</Length>
    <MaxWeight>0.00000</MaxWeight>
    <Type>PL</Type>
    <UseAsDefault>N</UseAsDefault>
    <Volume>0.00000</Volume>
    <Weight>0.00000</Weight>
    <WeightTolerance>0.00000</WeightTolerance>
    <Width>0.00000</Width>
    </ContainerType>
    <EPC />
    <FromLoc>RECV-01</FromLoc>
    <FromWhs>Moreno Valley</FromWhs>
    <InternalRecContNum>120</InternalRecContNum>
    <QcInspection>N</QcInspection>
    <Status>900</Status>
    <TotalQty>10.00000</TotalQty>
    <TotalWeight>10.00000</TotalWeight>
    - <ReceiptContainers>
    - <ReceiptContainer>
    <DateTimeStamp>2010-01-27T09:32:09.54</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ContainerId>LPNTEST2</ContainerId>
    <ConvQty>1.00000</ConvQty>
    <ConvUm>CS</ConvUm>
    <DimensionUm>IN</DimensionUm>
    <FromLoc>RECV-01</FromLoc>
    <FromWhs>Moreno Valley</FromWhs>
    <Height>5.00000</Height>
    <InternalLocContNum>0</InternalLocContNum>
    <InternalRecContNum>121</InternalRecContNum>
    <InventorySts>Available</InventorySts>
    <LaunchNum>190</LaunchNum>
    <Length>5.00000</Length>
    <QcInspection>N</QcInspection>
    <Qty>5.00000</Qty>
    <QtyUm>EA</QtyUm>
    <ReasonCode />
    + <ReceiptDetail>
    <DateTimeStamp>2010-01-27T09:27:08</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvHeight>0.00000</ConvHeight>
    <ConvLength>0.00000</ConvLength>
    <ConvQty>0.00000</ConvQty>
    <ConvWeight>0.00000</ConvWeight>
    <ConvWidth>0.00000</ConvWidth>
    <ErpOrderLineNum>1.00000</ErpOrderLineNum>
    <InternalRecLineNum>46</InternalRecLineNum>
    <GreatPlainsQty>0.00000</GreatPlainsQty>
    <OpenQty>0.00000</OpenQty>
    <OriginalQty>10.00000</OriginalQty>
    <Priority>0</Priority>
    <PurchaseOrderLineNumber>0.00000</PurchaseOrderLineNumber>
    <PutListNum>0</PutListNum>
    <SerialNumReqd>Y</SerialNumReqd>
    - <SKU>
    <DateTimeStamp>2010-01-27T09:27:08</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <Active>Y</Active>
    <AvailableOnWeb>N</AvailableOnWeb>
    <BomAction>N</BomAction>
    <CatchWeightReqd>N</CatchWeightReqd>
    <Cost>0.00000</Cost>
    <DaysToExpire>0</DaysToExpire>
    <Desc>ITEMA</Desc>
    <GtinEnabled>N</GtinEnabled>
    - <HarmCode>
    <RecordType>HARMONIZED</RecordType>
    </HarmCode>
    <Item>ITEMA</Item>
    <ItemCategories />
    - <ItemClass>
    <StorageTemplate />
    </ItemClass>
    <ImmediateNeedsEligible>N</ImmediateNeedsEligible>
    <InboundQcAmount>0.00000</InboundQcAmount>
    <InboundQcEligible>N</InboundQcEligible>
    - <ItemTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    </ItemTemplate>
    <InternalItemNum>22</InternalItemNum>
    <InventoryTracking>Y</InventoryTracking>
    <ListPrice>0.00000</ListPrice>
    <LotControlled>N</LotControlled>
    <NetPrice>0.00000</NetPrice>
    - <Nmfc>
    <RecordType>NMFC</RecordType>
    </Nmfc>
    <Producer>N</Producer>
    <SerialNumTrackInbound>Y</SerialNumTrackInbound>
    <SerialNumTrackInventory>Y</SerialNumTrackInventory>
    <SerialNumTrackOutbound>Y</SerialNumTrackOutbound>
    - <StorageTemplate>
    <DateTimeStamp>2001-06-12T17:07:39</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>System</UserStamp>
    <Active>Y</Active>
    <Desc>Default Storage Template</Desc>
    - <Details>
    - <StorageTemplateDetail>
    <DateTimeStamp>2010-01-06T09:47:29</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <Active>Y</Active>
    <GroupDuringUnitize>Y</GroupDuringUnitize>
    <Sequence>1</Sequence>
    <TreatFullPct>100</TreatFullPct>
    <Um>EA</Um>
    </StorageTemplateDetail>
    - <StorageTemplateDetail>
    <DateTimeStamp>2010-01-03T17:25:16</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <Active>N</Active>
    <GroupDuringUnitize>N</GroupDuringUnitize>
    <Sequence>2</Sequence>
    <TreatFullPct>100</TreatFullPct>
    <Um>CS</Um>
    </StorageTemplateDetail>
    + <StorageTemplateDetail>
    <DateTimeStamp>2001-06-12T17:26:35</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>System</UserStamp>
    <Active>N</Active>
    <GroupDuringUnitize>N</GroupDuringUnitize>
    <Sequence>3</Sequence>
    <TreatFullPct>100</TreatFullPct>
    <Um>PL</Um>
    </StorageTemplateDetail>
    </Details>
    <Template>*Default</Template>
    </StorageTemplate>
    - <UOMS>
    - <UOM>
    <DateTimeStamp>2010-01-13T10:54:26</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvQty>1.00000</ConvQty>
    <DimensionUm>IN</DimensionUm>
    <EPCPackageID>0</EPCPackageID>
    <Height>1.00000</Height>
    <InternalItemUm>13</InternalItemUm>
    <Length>1.00000</Length>
    <QtyUm>EA</QtyUm>
    <Sequence>1</Sequence>
    <TreatAsLoose>Y</TreatAsLoose>
    <TreatFullPct>100</TreatFullPct>
    <Weight>1.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>1.00000</Width>
    <SlottingID />
    <SlottingPalletTI>0</SlottingPalletTI>
    <SlottingPalletHI>0</SlottingPalletHI>
    </UOM>
    - <UOM>
    <DateTimeStamp>2010-01-13T10:54:37</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvQty>5.00000</ConvQty>
    <DimensionUm>IN</DimensionUm>
    <EPCPackageID>0</EPCPackageID>
    <Height>5.00000</Height>
    <InternalItemUm>14</InternalItemUm>
    <Length>5.00000</Length>
    <QtyUm>CS</QtyUm>
    <Sequence>2</Sequence>
    <TreatAsLoose>N</TreatAsLoose>
    <TreatFullPct>100</TreatFullPct>
    <Weight>5.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>5.00000</Width>
    <SlottingID />
    <SlottingPalletTI>0</SlottingPalletTI>
    <SlottingPalletHI>0</SlottingPalletHI>
    </UOM>
    - <UOM>
    <DateTimeStamp>2010-01-13T10:54:50</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvQty>10.00000</ConvQty>
    <DimensionUm>IN</DimensionUm>
    <EPCPackageID>0</EPCPackageID>
    <Height>10.00000</Height>
    <InternalItemUm>15</InternalItemUm>
    <Length>10.00000</Length>
    <QtyUm>PL</QtyUm>
    <Sequence>3</Sequence>
    <TreatAsLoose>N</TreatAsLoose>
    <TreatFullPct>100</TreatFullPct>
    <Weight>10.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>10.00000</Width>
    <SlottingID />
    <SlottingPalletTI>0</SlottingPalletTI>
    <SlottingPalletHI>0</SlottingPalletHI>
    </UOM>
    </UOMS>
    <BaseQty>10.00000</BaseQty>
    <BaseQtyUm>EA</BaseQtyUm>
    <ConvertedQty>1</ConvertedQty>
    <ConvertedQtyUm>PL</ConvertedQtyUm>
    <DimensionUm>IN</DimensionUm>
    <Height>1.00000</Height>
    <Length>1.00000</Length>
    <Quantity>10.00000</Quantity>
    <QuantityUm>EA</QuantityUm>
    <TotalListPrice>0.00000</TotalListPrice>
    <TotalValue>0.00000</TotalValue>
    <TotalVolume>10.00000</TotalVolume>
    <TotalWeight>10.00000</TotalWeight>
    <Value>0.00000</Value>
    <Volume>1.00000</Volume>
    <VolumeUm>IN3</VolumeUm>
    <Weight>1.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>1.00000</Width>
    </SKU>
    <TotalCost>0</TotalCost>
    </ReceiptDetail>
    + <SerialNumbers>
    - <SerialNumber>
    <DateTimeStamp>2010-01-27T09:27:06.757</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ObjectId>445</ObjectId>
    <SerialNumber>TEST6</SerialNumber>
    - <SerialNumTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <ObjectId>0</ObjectId>
    </SerialNumTemplate>
    </SerialNumber>
    - <SerialNumber>
    <DateTimeStamp>2010-01-27T09:27:06.757</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ObjectId>446</ObjectId>
    <SerialNumber>TEST7</SerialNumber>
    - <SerialNumTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <ObjectId>0</ObjectId>
    </SerialNumTemplate>
    </SerialNumber>
    - <SerialNumber>
    <DateTimeStamp>2010-01-27T09:27:06.757</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ObjectId>447</ObjectId>
    <SerialNumber>TEST8</SerialNumber>
    - <SerialNumTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <ObjectId>0</ObjectId>
    </SerialNumTemplate>
    </SerialNumber>
    - <SerialNumber>
    <DateTimeStamp>2010-01-27T09:27:06.757</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ObjectId>448</ObjectId>
    <SerialNumber>TEST9</SerialNumber>
    - <SerialNumTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <ObjectId>0</ObjectId>
    </SerialNumTemplate>
    </SerialNumber>
    - <SerialNumber>
    <DateTimeStamp>2010-01-27T09:27:06.757</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ObjectId>449</ObjectId>
    <SerialNumber>TEST10</SerialNumber>
    - <SerialNumTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <ObjectId>0</ObjectId>
    </SerialNumTemplate>
    </SerialNumber>
    </SerialNumbers>
    <Status>900</Status>
    <StatusFailed>N</StatusFailed>
    <ToLoc>PRIM-06</ToLoc>
    <ToWhs>Moreno Valley</ToWhs>
    <UploadInterfaceBatch>5f00ef65-262c-43e4-8dca-6a803424ed00</UploadInterfaceBatch>
    <Weight>5.00000</Weight>
    <Width>5.00000</Width>
    </ReceiptContainer>
    - <ReceiptContainer>
    <DateTimeStamp>2010-01-27T09:32:09.6</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ContainerId>LPNTEST1</ContainerId>
    <ConvQty>1.00000</ConvQty>
    <ConvUm>CS</ConvUm>
    <DimensionUm>IN</DimensionUm>
    <FromLoc>RECV-01</FromLoc>
    <FromWhs>Moreno Valley</FromWhs>
    <Height>5.00000</Height>
    <InternalLocContNum>0</InternalLocContNum>
    <InternalRecContNum>122</InternalRecContNum>
    <InventorySts>Available</InventorySts>
    <LaunchNum>190</LaunchNum>
    <Length>5.00000</Length>
    <QcInspection>N</QcInspection>
    <Qty>5.00000</Qty>
    <QtyUm>EA</QtyUm>
    <ReasonCode />
    + <ReceiptDetail>
    <DateTimeStamp>2010-01-27T09:27:08</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvHeight>0.00000</ConvHeight>
    <ConvLength>0.00000</ConvLength>
    <ConvQty>0.00000</ConvQty>
    <ConvWeight>0.00000</ConvWeight>
    <ConvWidth>0.00000</ConvWidth>
    <ErpOrderLineNum>1.00000</ErpOrderLineNum>
    <InternalRecLineNum>46</InternalRecLineNum>
    <GreatPlainsQty>0.00000</GreatPlainsQty>
    <OpenQty>0.00000</OpenQty>
    <OriginalQty>10.00000</OriginalQty>
    <Priority>0</Priority>
    <PurchaseOrderLineNumber>0.00000</PurchaseOrderLineNumber>
    <PutListNum>0</PutListNum>
    <SerialNumReqd>Y</SerialNumReqd>
    - <SKU>
    <DateTimeStamp>2010-01-27T09:27:08</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <Active>Y</Active>
    <AvailableOnWeb>N</AvailableOnWeb>
    <BomAction>N</BomAction>
    <CatchWeightReqd>N</CatchWeightReqd>
    <Cost>0.00000</Cost>
    <DaysToExpire>0</DaysToExpire>
    <Desc>ITEMA</Desc>
    <GtinEnabled>N</GtinEnabled>
    - <HarmCode>
    <RecordType>HARMONIZED</RecordType>
    </HarmCode>
    <Item>ITEMA</Item>
    <ItemCategories />
    - <ItemClass>
    <StorageTemplate />
    </ItemClass>
    <ImmediateNeedsEligible>N</ImmediateNeedsEligible>
    <InboundQcAmount>0.00000</InboundQcAmount>
    <InboundQcEligible>N</InboundQcEligible>
    - <ItemTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    </ItemTemplate>
    <InternalItemNum>22</InternalItemNum>
    <InventoryTracking>Y</InventoryTracking>
    <ListPrice>0.00000</ListPrice>
    <LotControlled>N</LotControlled>
    <NetPrice>0.00000</NetPrice>
    - <Nmfc>
    <RecordType>NMFC</RecordType>
    </Nmfc>
    <Producer>N</Producer>
    <SerialNumTrackInbound>Y</SerialNumTrackInbound>
    <SerialNumTrackInventory>Y</SerialNumTrackInventory>
    <SerialNumTrackOutbound>Y</SerialNumTrackOutbound>
    - <StorageTemplate>
    <DateTimeStamp>2001-06-12T17:07:39</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>System</UserStamp>
    <Active>Y</Active>
    <Desc>Default Storage Template</Desc>
    - <Details>
    - <StorageTemplateDetail>
    <DateTimeStamp>2010-01-06T09:47:29</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <Active>Y</Active>
    <GroupDuringUnitize>Y</GroupDuringUnitize>
    <Sequence>1</Sequence>
    <TreatFullPct>100</TreatFullPct>
    <Um>EA</Um>
    </StorageTemplateDetail>
    - <StorageTemplateDetail>
    <DateTimeStamp>2010-01-03T17:25:16</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <Active>N</Active>
    <GroupDuringUnitize>N</GroupDuringUnitize>
    <Sequence>2</Sequence>
    <TreatFullPct>100</TreatFullPct>
    <Um>CS</Um>
    </StorageTemplateDetail>
    - <StorageTemplateDetail>
    <DateTimeStamp>2001-06-12T17:26:35</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>System</UserStamp>
    <Active>N</Active>
    <GroupDuringUnitize>N</GroupDuringUnitize>
    <Sequence>3</Sequence>
    <TreatFullPct>100</TreatFullPct>
    <Um>PL</Um>
    </StorageTemplateDetail>
    </Details>
    <Template>*Default</Template>
    </StorageTemplate>
    - <UOMS>
    - <UOM>
    <DateTimeStamp>2010-01-13T10:54:26</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvQty>1.00000</ConvQty>
    <DimensionUm>IN</DimensionUm>
    <EPCPackageID>0</EPCPackageID>
    <Height>1.00000</Height>
    <InternalItemUm>13</InternalItemUm>
    <Length>1.00000</Length>
    <QtyUm>EA</QtyUm>
    <Sequence>1</Sequence>
    <TreatAsLoose>Y</TreatAsLoose>
    <TreatFullPct>100</TreatFullPct>
    <Weight>1.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>1.00000</Width>
    <SlottingID />
    <SlottingPalletTI>0</SlottingPalletTI>
    <SlottingPalletHI>0</SlottingPalletHI>
    </UOM>
    - <UOM>
    <DateTimeStamp>2010-01-13T10:54:37</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvQty>5.00000</ConvQty>
    <DimensionUm>IN</DimensionUm>
    <EPCPackageID>0</EPCPackageID>
    <Height>5.00000</Height>
    <InternalItemUm>14</InternalItemUm>
    <Length>5.00000</Length>
    <QtyUm>CS</QtyUm>
    <Sequence>2</Sequence>
    <TreatAsLoose>N</TreatAsLoose>
    <TreatFullPct>100</TreatFullPct>
    <Weight>5.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>5.00000</Width>
    <SlottingID />
    <SlottingPalletTI>0</SlottingPalletTI>
    <SlottingPalletHI>0</SlottingPalletHI>
    </UOM>
    - <UOM>
    <DateTimeStamp>2010-01-13T10:54:50</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ConvQty>10.00000</ConvQty>
    <DimensionUm>IN</DimensionUm>
    <EPCPackageID>0</EPCPackageID>
    <Height>10.00000</Height>
    <InternalItemUm>15</InternalItemUm>
    <Length>10.00000</Length>
    <QtyUm>PL</QtyUm>
    <Sequence>3</Sequence>
    <TreatAsLoose>N</TreatAsLoose>
    <TreatFullPct>100</TreatFullPct>
    <Weight>10.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>10.00000</Width>
    <SlottingID />
    <SlottingPalletTI>0</SlottingPalletTI>
    <SlottingPalletHI>0</SlottingPalletHI>
    </UOM>
    </UOMS>
    <BaseQty>10.00000</BaseQty>
    <BaseQtyUm>EA</BaseQtyUm>
    <ConvertedQty>1</ConvertedQty>
    <ConvertedQtyUm>PL</ConvertedQtyUm>
    <DimensionUm>IN</DimensionUm>
    <Height>1.00000</Height>
    <Length>1.00000</Length>
    <Quantity>10.00000</Quantity>
    <QuantityUm>EA</QuantityUm>
    <TotalListPrice>0.00000</TotalListPrice>
    <TotalValue>0.00000</TotalValue>
    <TotalVolume>10.00000</TotalVolume>
    <TotalWeight>10.00000</TotalWeight>
    <Value>0.00000</Value>
    <Volume>1.00000</Volume>
    <VolumeUm>IN3</VolumeUm>
    <Weight>1.00000</Weight>
    <WeightUm>LB</WeightUm>
    <Width>1.00000</Width>
    </SKU>
    <TotalCost>0</TotalCost>
    </ReceiptDetail>
    + <SerialNumbers>
    - <SerialNumber>
    <DateTimeStamp>2010-01-27T09:27:08.867</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ObjectId>440</ObjectId>
    <SerialNumber>TEST1</SerialNumber>
    - <SerialNumTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <ObjectId>0</ObjectId>
    </SerialNumTemplate>
    </SerialNumber>
    - <SerialNumber>
    <DateTimeStamp>2010-01-27T09:27:08.867</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ObjectId>441</ObjectId>
    <SerialNumber>TEST2</SerialNumber>
    - <SerialNumTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <ObjectId>0</ObjectId>
    </SerialNumTemplate>
    </SerialNumber>
    - <SerialNumber>
    <DateTimeStamp>2010-01-27T09:27:08.867</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ObjectId>442</ObjectId>
    <SerialNumber>TEST3</SerialNumber>
    - <SerialNumTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <ObjectId>0</ObjectId>
    </SerialNumTemplate>
    </SerialNumber>
    - <SerialNumber>
    <DateTimeStamp>2010-01-27T09:27:08.867</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ObjectId>443</ObjectId>
    <SerialNumber>TEST4</SerialNumber>
    - <SerialNumTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <ObjectId>0</ObjectId>
    </SerialNumTemplate>
    </SerialNumber>
    - <SerialNumber>
    <DateTimeStamp>2010-01-27T09:27:08.867</DateTimeStamp>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <UserStamp>lmenghani</UserStamp>
    <ObjectId>444</ObjectId>
    <SerialNumber>TEST5</SerialNumber>
    - <SerialNumTemplate>
    <ProcessStamp>cb4b572f-2b2c-46b9-81b7-b585aea08f93</ProcessStamp>
    <ObjectId>0</ObjectId>
    </SerialNumTemplate>
    </SerialNumber>
    </SerialNumbers>
    <Status>900</Status>
    <StatusFailed>N</StatusFailed>
    <ToLoc>PRIM-06</ToLoc>
    <ToWhs>Moreno Valley</ToWhs>
    <UploadInterfaceBatch>5f00ef65-262c-43e4-8dca-6a803424ed00</UploadInterfaceBatch>
    <Weight>5.00000</Weight>
    <Width>5.00000</Width>
    </ReceiptContainer>
    </ReceiptContainers>
    <StatusFailed>N</StatusFailed>
    <ToLoc>PRIM-06</ToLoc>
    <ToWhs>Moreno Valley</ToWhs>
    </Parent>
    </ParentContainers>
    <ReceiptContainers />
    </Receipt>
    </Receipts>
    </WMFWUpload>
    </WMWDATA>
    </WMWROOT>

  • Reg: Sale Order short close at Schedule lines level

    Dear Gurus,
    Requirement is to close all open schedule lines beyond one month.
    In detailed. User Enters Manual Schedule Lines as per the requirement of the customer say for 6 months.
    for Eg . Sale order entered on 1st of august to Dec with 500 qty, schedule 100 qty/Month, manually in sale order.
    Now if business delivers only 90 out of 100. they need to short close that particular schedule line only not the entire sale order or line item. I tried with Delivery block at schedule lines level. but it is not working.
    If any one has come across this scenario please share with me.
    Regards
    Praveen

    If we apply a delivery block the pending qty will automatically add to the last schedule date. Ex. if there is 3 dates in the schedule lines, and there is some 50 qty pending in second date, and if u apply delivery block it will carry forward that pending 50 qty to the third schedule line and adds up with it.
    But in my case i just want to close that pending 50 qty in second line item.
    Regards
    Praveen
    Edited by: Praveen_PG on Sep 15, 2011 1:28 PM

Maybe you are looking for