Trouble with making a freeze frame?

Hello All,
I need some help with something I'm trying to do. I have a short clip in my timeline that I have color corrected and added some filters to. Then I move the playhead around until I find a still picture that I like and then I go to Modify>Make Freeze Frame and then I move the still from the viewer over to the section that hold all the files. The trouble is that when I make the freeze frame FCE is giving the version before I did color correction or adding the filters. How do I get to make a freeze frame that has been color corrected? It's showing me the raw version before I've done anything to it.
Thanks for your help.
MIke

When the freeze frame is created in FCE, it is only from the master clip (with no filters applied). Simply drag the filters that you applied to the clip to the new freeze frame. The filters will be applied with the settings you made.
-DH

Similar Messages

I'm having trouble with my applications freezing. Then when they are "unreponsive" I quit and another becomes "unresponsive" until I'm down to Finder and it won't relaunch. HELP!!

I'm having trouble with my applications freezing. Then I force-quit because they are "unresponsive," another applidation becomes "unresponsive" until I'm down to Finder and it won't relaunch. HELP!!

Mine is doing the same thing! I have more than enough hard drive. It's only 3 months old.

I am having trouble with the ipad2 freezing up causing me to restart the tablet. How can I fix this?

I am having trouble with the ipad2 freezing up causing me to restart the tablet. How can I fix this?

Doubt it is a Hardware issue...
If the Reset and the Restart have not Resolved the Issue...
Then the Next Step is a Restore...
Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

I am also having trouble with my cursor freezing after installing Mavericks. Never did it before. I called tech support at Apple and they had me restart computer and mouse together from a complete shut down. So far has seemed to work.

I am having trouble with my cursor freezing between applications after installing Mavericks. Called Apple on my 3 year warranty and opened a case. They suggested a complete shut down of computer and turning off mouse. Then a reboot and turn on mouse. So far iit has seemed to work. Hope this continues??
Hope it helps others.

I think you can solve your problems by removing your AppleID email address from BOTH the Messages setting on your iPhone and the iMessages settings on your Mac.
On iPhone:
Settings > Messages > iMessage > Dissabled
Settings > Messages > Send & Receive > touch the "(i)" < touch "Remove This Email"
On Mac:
Open "Messages" application
Click "Messages menu > Preferences
Click "Accounts"
Select your AppleID account
Under the "You can be reached for messages at" settings, uncheck your AppleID email address and your phone number
Then uncheck the "Enable this account" setting
And lastly, ask all of your friends with iPhones to delete all iMessage conversations (blue bubbles) in their entirety.
To test, send a friend a new text using their phone number (not their email address) and watch the color of the bubble. If it's green then you are using SMS.

Trouble with making dwt editable

I have a 2nd template in my site I am using for all pages except index. It has a image in the upper right that I want changed on each new page but when I go to make it editable (insert>template objects>editable region) I get a pop up saying this: "The selection already contains or is overlapped with editable optional region" ??? The only area of the template that is editable is in the content area below. How do I make that image change on a new page I create?
Link to page: http://www.universaltime.net/test2/mjr8000.html
Thanks in advance
Dreamweaver Version CS3 on Windows XP

No, you don't need to detach it from the template.
You can change the image in the CSS file by making a tag...say, the body tag...ID attributes editable.
Select the <body> tag (use the Tag Selector)
Choose Modify > Templates > Made Attribute Editable
Choose or Add the ID Attribute in the "Editable Tag Attributes" box
Check the box to "Make attribute editable"
Enter a Label (this will be visible in the dialog box where you enter a new page's body ID)
Type: Text
Default: enter your default <body> id here, if you want one.
Press OK
Now, you can assign a different ID to each page, and you can then "key" images for that div to be different on different pages.
To edit an attribute that you have set up this way, go to a child page and do Modify > Template Properties. You will raise a dialog box that presents a table showing your Labels (see #5 above) and the value that attribute now carries (see #7, if you have not yet edited a new value).
Select the attribute you want to edit and change the value to the new body ID that you want for that page, say "homepage" for the index page.
You will need to put an id on the cell where you image now resides. You will remove the 'surface' image from the code and rely on using a background image.
Now, in your CSS file, you want to set a background image for the cell.
body#homepage td#image {
background-image: url(images/header_graphic.jpg;
You can see that if you create a child page and make the body ID attribute "contactpage" (for instance), you can set up a CSS rule like this:
body#contactpage td#image {
background-image: url(...path to your new image for the contact page...);
Editable attributes may be used to control and customize pages, not just with changing background images, but also to highlight current pages in navigation. Here is a page and a site I am working on that does just that: http://www.gravenimagedesign.net/PHA/publicHousing/index.html
So, I've gotten all wordy, but if this seems like something you are interested in, and you need more explanation, just holler!
Z

Trouble with making slide show VCD or copying photos to CD

I have saved approximately 200 photos and made a copy of the photos on a cd. The problem is that some of the photos copied horizontally instead of in vertical format.....the photos where all properly showing on the PSE7 organizer...but about 13 copied in the wrong format??? Then I tried making a slide show with music....works fine in the PSE7 program, but when I went to output to VCD, nothing copied....except some files that don't contain the photos?
Russ

1. Reduce the image size 1000 x 750 if you are using high resolution images.
2. Use windows supported codec background music for slide show.
3. Update the latest audio/video drivers.

Having trouble with making new internet tabs and windows

When I open a new tab or new window, some small blank black windows appear and disappear right away. I have tried running virus scans, uninstalling unnecessary programs and deleting memory but they still pop up. Also after the blank windows disappear, there is a "not responding" after the blank windows disappear, for about 10 seconds and then resumes normal

Well first, the version of Firefox you are running is EXTREMELY old and insecure. Please update to Firefox 11 right away. [[Updating Firefox]] can help you with that.
After doing that, if you are still having issues, Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works fine in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.

Trouble with 5G iPod Freezing

Hey all, I just bought the 5G iPod and Iam having problems with it already. I put a movie on it by using "Handbreak" with MP4. The movied played great through iTunes, but it kept freezing up when it played on the iPod!!! It was also forming green boxes on the screen. The movie would freeze up and put these green boxes in random places, never in the same spot!! Please tell me that it can be fixed and that nothing is wrong with my iPod but I used the wrong program to get the movie on my iPod!!
-J. CrIsPiN

Welcome to Apple Discussions!
Try these...
Resetting Your iPod
Restoring Your iPod
Also, make sure the videos play perfectly in iTunes
Merry Christmas
btabz

Trouble with I-Tunes Freezing

I know this has been brought up by several others. Moderators please feel free to move my post to a more appropriate thread if you feel so led.
I have been having a problem of late. I connect my wonderful I-Phone 5s to my Mac Power Book and the I-Tunes freezes. I am unable to transfer precious tunes to my I-Phone. This diminishes my pleasure as I work my tail off all day. And I haven't a clue what to do.
Please help.

Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Application Support/SyncServices
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Trouble with making a link to Web photo Album in Dreamweaver cs4

I am pretty new to this. I have created my website, made all my links, which are working fine, but when I made a Web Photo Album in Adobe Bridge, saved in Dreamweaver under my other web pages on my site.
Here comes the problem, I made a link from i.e. (parents.html) to go into my Web Photo Album but it won't work when I preview it in browser, but other pages will work when I test it with the same link on my (parents.html) page.
I am pulling my hair out, I can't understand why the link to Web Photo Album won't work, it is the last thing I have to do before I have to upload website. Can someone please, please, please tell me what is wrong.
Cheers

You may need to upload the pages anyway, so that people can help you find the problem. Seeing the code and the associated files is the only way to try and help you ;-)
You can always upload the files to a test folder on the server instead of directly into the root of the site if that is going to be an issue for you,
PS: If it's working from being linked to from other pages, then there must a pathing issue when it comes to that one page.

Trouble with Making A Book

I am in the process of making a book. I just received new photos that I want to include, that were not included when I made the original file. When I take my event group of pictures and drag it to the book icon - nothing happens. I believe the pictures are there somewhere as the total number of photos in the book is quite large - over 1,000. But I can't see them in the books browser to drag them to a page. Any ideas? To many pics?
thanks
Dirk

When I take my event group of pictures and drag it to the book icon - nothing happens.
When you drag the photos to the book icon, do you see a green plus sign?

Trouble with making playlists on iPhone 6 plus running iOS8,please help!

Iphone6 plus 128G
IOS8.02
IInitially I restored my phone from my previously used iPhone 5 that was updated to IOS 8.01 backed up the same day I got my iphone 6 plus. It stalled when installing the 2nd out of 400 apps. I had already hit the "X" button on iTunes to stop the sync so I couldn't do the "wifi-sync" trick to keep it going. Anyways I eventually turned it into airplane mode after unplugging it and starting the sync over. Was able to restore everything on my old iPhone, updated my software to 8.02 then updated all my apps, and sync'd my phone again and created a backup on my computer and iCloud. Saw people were having problems with syncing playlists, but all mine showed up except recently added and recently played.
My question is how to create a playlist on my phone. I was trying to create a new playlist on my phone, was able to create a new playlist, hit the edit button to add songs, added all the songs I wanted, but then I'm stuck here. There's no button to "finalize/create" the playlist after all the songs are added. It will let me go to other playlists, my songs/albums/artists/etc tabs, but at the top It just says add songs to playlist. When I go to the playlists tab and go to the newly created playlist it just has the playlist name and says there's no songs in the playlist.
any help would be appreciated!

hi
i was just creating a playlist when the Done button disappeared. i then tried to make it happen again and i did:
-play a song
-then make a new playlist
-select some songs for the playlist
-wait for the song to change and when it does select some songs to add from the artist/album section
-the song change turns the "Done" button to "now playing"
-now you've gotta quit the app because there is not way to finish adding to playlist or change the song you're listening to D:
here are photos before and after the song changes, note the text at the top right of the screen:
After the button changes there is no way of getting the 'done' button back so you have to quit the app
i am also on an iPhone 6

Troubles with making iPod an external hard drive. Very frustrated. Please help..

I need to make my iPod an external hard drive, and the “enable disk use” option does not appear for me. I've gone through all the settings, reverted back to 10.7 and gone through all of those settings too. I've watched a million ****ing tutorials and I still can't find it. The reason I ask is because I want to switch to Winamp media player, which also has the ability to manage music on mobile devices (including iPod), but Winamp wont recognize my iPod unless it's an external hard drive. I'm going to go insane, if I can't get my music back for school work. Thanks for anyone that helps.
- Lewis

Here's another one:
You need iOS 7.0 and Mac OS X 10.8. I have an Ipod Touch 4. I tried to update iOS from 6.1.6 to 7.0. I got no error message, but I checked "software update" in the ipod settings. The iOS version is still 6.1.6 and it says that "my software is up to date". So go figure!
You need to install it on both your Mac and your iOS device. The screenshot above is from: http://www.beyondf.com/airbridge/. The page contains links to both the Mac and the iOS versions.

Freeze Frame Does Not Work Properly Please help

I have a sequence that will be cut into a master sequence consisting of six video tracks. When I invoke the Freeze Frame command, the resulting freeze frame only has the video from the bottom track (V1). This happens no matter where the playhead is when I select Freeze Frame. Even after rendering the sequence a Freeze Frame will only contain the video from the bottom track. Why???
FCP HD 4.5
Mac OS 10.3.9
QT 6.5.2
G4-500DP Mac OS X (10.3.9)

The Freeze Frame function targets the bottom most track with the AUTOSELECT button active. Autoselect is the gray box to the right of V1, V2, etc.
Are all your video tracks composited so that they are all visible at once? Then try nesting them, THEN making the freeze frame.
Shane
"There's no need to fear, UNDERDOG is here!"

How to edit a freeze frame in Photoshop?

When making a freeze frame, the file that FCE creates is videofile AVI or MOV, the same as the source clip is. If I would like to edit the image in photoshop, it should be converted to still image?
Is there any way to do that in FCE?

OK. Thanks!
Eventhough I use Quick Time almost daily to export and compress movies, I´ve never before noticed that pop up menu.
I´ve been only wondering where all those formats disappeared from the main dialog box where all the other setting are done.
So I got two answers at the same time.

Trouble with making a freeze frame?

Similar Messages

Maybe you are looking for