Trouble with Maya 8.5 after installing Airport Extreme

Installed Airport Extreme 802.11n a couple weeks ago - using OS 10.4 on an iMac and 10.3 on G4 Quicksilver.
Network is working fine.
Tried to use Maya 8.5 this week and program freezes on startup. Only change to Mac system is installing network.
Is Autodesk license manager unable to recognize computer with network setup?
Thanks for any help.

Maya not being able to recognize the license dat file will not cause Maya to lock up or crash. Have you run a Maya crash log to confirm what is causing this? Since upgrading from Tiger to Leopard I also upgraded to Maya 2008 (don't know why Autodesk didn't call it 9.0..lol) from 8.5. I haven't experienced any system crashes on Leopard, even on the MacBook Pro (Core 2 Duo 2.33 GHz, 3 GB RAM, ATI X1600). Note: I'm also using the AEBS in the SOHO and no issues with the license server.

Similar Messages

  • HT3024 after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

    after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

    Hi David,
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Tried resetting the PMU for PB/iB?
    http://docs.info.apple.com/article.html?artnum=14449

  • After installing airport extreme, can't recieve mail on comcast/outlook??

    After installing Airport Extreme my internet works well, however I can't recieve email on my comcast/outlook.  Outgoing works I have rechecked my settings and they all seem to be ok. Help?

    Hello mrpardue,
    We've an article that provides information and steps which can help get your mail moving again.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Cheers,
    Allen

  • I am also having trouble with my cursor freezing after installing Mavericks. Never did it before. I called tech support at Apple and they had me restart computer and mouse together from a complete shut down. So far has seemed to work.

    I am having trouble with my cursor freezing between applications after installing Mavericks. Called Apple on my 3 year warranty and opened a case. They suggested a complete shut down of computer and turning off mouse. Then a reboot and turn on mouse. So far iit has seemed to work. Hope this continues??
    Hope it helps others.

    I think you can solve your problems by removing your AppleID email address from BOTH the Messages setting on your iPhone and the iMessages settings on your Mac.
    On iPhone:
    Settings > Messages > iMessage > Dissabled
    Settings > Messages > Send & Receive > touch the "(i)" < touch "Remove This Email"
    On Mac:
    Open "Messages" application
    Click "Messages menu > Preferences
    Click "Accounts"
    Select your AppleID account
    Under the "You can be reached for messages at" settings, uncheck your AppleID email address and your phone number
    Then uncheck the "Enable this account" setting
    And lastly, ask all of your friends with iPhones to delete all iMessage conversations (blue bubbles) in their entirety.
    To test, send a friend a new text using their phone number (not their email address) and watch the color of the bubble.  If it's green then you are using SMS.

  • Cant restart MBP1.83 after installing AirPort Extreme Update 2007-001, Help

    Today I have installed that update on my macbook pro 1.83 mghz as the only update available, accordingly to apple software update utility. After a succesfull download and preinstallation, when I have restarted a lot of unix command lines appeared on a black screen. Then restarted again and the same thing happened (command lines stopping at a empty line). After a hard restart, the system tries to start but it stays on fisrt screen (apple logo with round timer keeping rotating).
    Help please!!! and be carefull anyone who tries to install this patch. Thanks!
    PS: I have tried disk check and permissions test and everything is ok, the problem continues
    Macbook Pro 1.83mghz   Mac OS X (10.4.8)   2Gb Ram

    You cant have a macbook pro 1.83 you must just have a normal macbook 1.83ghz processor. The lowest model of macbook pro has a 2.16ghz processor. I currently have a 2.0Ghz macbook core duo machine and after installing the airport update the machine restarted then came up with a dialog box instead of booting the os saying that i should do a hard restart in order for everything to work properly so once i did a hard restart by holding down the power button till the machine went off everything has worked fine so far.

  • PowerMac G4 (FW 800) Won't Start After Installing Airport Extreme Card!

    After installing an Airport Extreme Card in my G4 FW 800, the computer will not Chime or Start Up; shortly thereafter, the Fan begins to Run erratically.
    Without the Airport Card installed, the CPU runs normal, with the exception of the clock needing to be reset.
    Any help is Greatly Appreciated! -Nico

    Hey Tom, thanks for the response. I have tried holding Command-Option-R-P down (resetting the PRAM) at startup with no avail. I have also pressed the PMU button with and without the Airport Card installed. Still no luck. I am pretty stumped. I ran a hardware check on the machine, and it has come back successful without the card.
    The previous owner installed an extra internal HD and some memory. I have since installed a new PCI graphics card. Do you think these have anything to do with it?

  • Imac 24 won't sleep after installing Airport Extreme

    Hi there.
    This topic may have been covered already, but does anyone know why I can't seem to get either my Imac 24 display or the internal HD to automatically sleep after installing the Airport Extreme .11n?
    Both the display and internal HD would sleep just fine when directly connected to modem, but now with Airport Extreme, only the screen saver appears and I can't get either the display or drive to sleep.
    Thanks
    Imac 24   Mac OS X (10.4.9)  

    Hmm, check your settings for sleeping.
    Try Apple Web Chat
    http://www.apple.com/support/chat

  • Kernal panics after installing AIRPORT EXTREME PCI 54M WIFI CARD

    hi all - after reading around the forums - i bought this off ebay
    AIRPORT EXTREME PCI 54M WIFI CARD /APPLE POWERMAC G3&G4
    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=37 0157697386#ht1341wt892
    but when i boot up i all i get is the screen of death - kernal panic - and need to reboot to another kernal panic
    i have tried it in slots 2-5 and the result is the same - i have now taken it out and the machine boots fine.
    I am keen to use it as a media streamer for appletv - have i bought the wrong card or is there something i can try/do?
    as always - thanks in advance
    darren, lockerbie, uk

    Hi-
    I would consider the problem to possibly be incompatibility with Leopard.
    The seller states 10.2/10.3/10.4 "and above", but does this include 10.5x? Leopard is not specifically mentioned. "And above" could mean up to 10.4.11.......
    If you have a drive with OS 10.4x on it, try booting to that volume with the card.
    If it works, then it's an OS incompatibility.
    If it doesn't, then the card is the problem.
    Biggest problem, is it looks like some generic brand. Not knowing the maker really makes trouble shooting difficult.
    Is is a Broadcom chipset?
    While generic Broadcom chipset cards worked well up through 10.4.11, Leopard seems to have "broken" that generic support that was previously enjoyed, for at least some of those chips. Seems to be an "era" related thing......
    If the chipset is Atheros, the previously successful Orangeware driver also doesn't work in Leopard.

  • Problems after installing Airport Extreme Update 2008-001

    ever since I installed the Airport Extreme update 2008-001 my internet connection has been dropping and it's so frustrating. I normally wait and don't install updates immediately after they are released. I installed this one and now my internet connection keeps dropping.
    Anyone have any suggestions??

    Same scenario here, though I'm running 10.4.9. on a Mac Pro. I've tried every known fix, but Safari still stalls every few minutes - taking upwards of a minute to continue loading whatever page I was browsing to.
    Other apps, including Mail, Firefox, and Remote Desktop screen sharing aren't affected - I can ping away without issue while Safari is choking, and there is no unusual Safari CPU consumption in Activity Monitor
    Mac Pro Mac OS X (10.4.9)

  • Help after installing airport extreme on my ibook G4

    Hi,
    I installed an airport extreme card but then how do I know that my G4 recognizes it? Does it need any software or should it automatically pick it up? Help Im new to mac so Im still learning how to get around it. I have os 10.39 on it.
    Thanks,
    Millie

    how do I know that my G4 recognizes it?
    Choose About this Mac from the Apple menu and click on More Info, or open the Network pane of System Preferences.
    Does it need any software or should it automatically pick it up?
    The necessary software should be included with Mac OS X 10.3.
    (32522)

  • My wifi printer is not recognised after installing airport extreme

    Hi,
    I have recently changed internet provider and took the opportunity to change router. I removed a netgear modem/router and installed a Draytek Vigor120 modem and Apple AirPort Extreme. My existing wifi HP all in one printer (which was working normal before change) is no longer recognised. I want to use the USB port on the extreme for an external hard drive so don't want to connect the printer to it. Any solutions? I am using an imac with OS X 10.8.3.

    Well the printer wont be recognized until it has been connected to the new wifi. Most wifi printers use either an LCD screen on them or software that came with them. You will likely need to reconfigure the printer so that it can connect to your new network.

  • IBook G4 won't start up after installing Airport Extreme card

    Hi,
    just installed an Airport Extreme Card into girlfriends iBook G4 (10.4.5), which now won't start up. After pressing the start button all I hear is the fan spin (pretty fast actually), but nothing else happens.
    When I remove the card the iBook starts up normally.
    Any thoughts what could be wrong? Bad card? Bad connection?
    Thanks a lot

    Sven, Welcome to the discussion area!
    Are you certain that you have an AirPort Extreme card?
    Are you certain that it is an iBook G4? The iBook G3s require the original AirPort card.
    If both of those are OK, then one (or more) of these is true:
    The card isn't installed correctly.
    The AirPort Extreme card is defective.
    The iBook's motherboard is defective.

  • Blank screen on my eMac after installing Airport Extreme Card

    I just bought and installed (the right way, I checked) the Airport Extreme card on my eMac G4 desktop and at first the computer couldn't find it at all and after restarting several times, now the computer turns on but the screen is absolutely blank. I took the card out and restarted and it came on just fine. Can the card be affecting the screen? ANy help appreciated, I have no idea on this one.

    This symptom is commonly seen when the Airport card is not FULLY seated into its socket. It can take a fair bit of force to do this.

  • Airplay icon missing on iMac after installing airport extreme

    Can't get my iMac to display the airplay icon after changing to the AirPort Extreme wireless router.
    Previous Setup: 
    Cable Modem ->LinkSys Wireless Router -> AirPort Express for Home Stereo access using Airplay
              Accessed Airplay from iPhone 5S, iPad, iMac - all worked
    NEW Setup:
    Replaced old wireless router with Airport Extreme
    Cable Modem -> Airport Extreme -> Airport Express for Airplay on home speaker system
    Airport Utility (v 6.3.2) see's both the Airport Extreme and the Airport Express
    The Airport Express is in Network Mode of :Join a wireless network.  My AirPort Extreme wifi network is Why Phi
    The Airplay option is selected
    My iMac does not see the airplay option in the menu bar.
    Note:  The Airplay icon used to show up on my iMac before I had the AirPort Extreme. 
    My iPhone 5s see's the AirPort Express for airplay, and plays the music fine.
    The display for my iMac is flagged to show for AirPlay but it doesn't see any devices.
    If you know what I have missed, please let me know!  I loved the AirPlay option from my iMac, and would really like to get it back!

    The AirPlay icon within iTunes appears when iTunes "discovers" that an active AirPlay-ready "speaker" is available on the network. In this case the speaker would be your AirPort Express base station.
    It may be possible that the Express has not properly joined the Wi-Fi network provided by the new Extreme base station.
    Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

  • Cannot turn on my iBook after installing airport extreme card

    I have an older iBook that's running OSX 10.4.3 I am trying to install an airport extreme card, but I am unable to turn the computer on after installing it. What's the deal?

    you have an ibook G3?? if so, then you need the old "Airport Card", which apple no longer makes and you'll have to get from macmall or macwireless.com
    iBook G4   Mac OS X (10.4.2)  

Maybe you are looking for

  • Project file not opening in my system

    I have installed a new LabVIEW 8.2 and all the drivers resourses also, i am not able to open th project file, sometimes the NIMax is not opening and keeps me installing again and again but not working properly.even after formating the system i am not

  • How to extract data for this tcode

    Hello BW Experts, I have a transaction code in R/3. i observe that is a using a program P1 and structure S1 to generate the table display in the r/3 transaction. i go to se38 and display the code, it seems to be a module pool. Any suggestions for ext

  • Is javascript capable of exporting specific artboards to a jpg?

    I can export a single artboard to a jpg using the GUI but "artboardRange" doesn't do anything when exporting to a jpg. I can use the artboardRange in the pdf save options and that works fine but, while the artboard selection is there in the jpg expor

  • Why photoshop CS5 opens twice the same image?!

    Hi there Sometimes when I have opened an image in PS I reopened from bridge or from Ilustrator as a smart object and the image duplicates in photoshop! Somebody knows what it's happening with this? is this a bug? if not what is the use of this? thank

  • HT4623 i update my 4.1 to 6.01 so my iphone not activated , what can i do

    hello