Trouble with media syncing

I need help with media sync everytime I do it the music transfers sucessfully but it double everything, then if I delete the double it will delete the original so am left with no music. Then when I look in my files there is only one music file so I am very puzzled. Can someone help me, I have tried everything that I have thought of.
Thanks

Ade Ingram wrote:
did so, but then it started saying that my iPad wasn't usable. I don't understand why this is happening.
What said the iPad wasn't usable? I have never heard that one before.
This is how you sync music to the iPad.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on all of the albums or playlists that you want to sync - or the entire library if you like.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes

Similar Messages

  • Switched from a PC to a MBP, having trouble with iTunes syncing iPhones, iPods. Devices are still linked to the PC ?

    Switched from a PC to a MBP, having trouble with iTunes syncing iPhones, iPods. Devices are still linked to the PC. How do I undo the PC link without a restore / reformat?

    Post in the iTunes forum:
    https://discussions.apple.com/community/itunes
    Read:
    http://www.apple.com/support/switch101/
    http://www.macworld.com/article/1153952/superguide_switchingtoamac.html

  • Can't get itunes onto my Pre with Media Sync

    I've been trying to use the Media Sync to get some of my itunes onto my Pre for ringtones, but I just can't do it.  I went though all the steps listed in the Palm Support section titled: "Use Media sync mode to synchronize photos, music, and videos through iTunes".  I got all the way to step 7 and was right on par with the directions.  I plugged in the phone to the USB, itunes opened up, but the screen did not look like the one in the directions at all.  It was the normal screen for my itunes.  When I got to step 7, my itunes never recognized my Pre as a device, and  I couldn't go any further.  Palm says:
    Follow the steps in iTunes to synchronize files to your phone. Visit Apple’s website to learn how to sync:
    Music and podcasts: support.apple.com/kb/HT1351
    Photos: support.apple.com/kb/HT1678
    Videos: support.apple.com/kb/HT1333
    I tried the link Palm provided to Apple support, but Apple doesn't tell you how to work with anything other than a genuine ipod or iphone, so that was no help at all.  Does anyone know how to do this?  I'm just trying to get some **bleep** ringtones!!!!  I can't even buy any through verizon because for some reason that service isn't available for Palm Pre's yet!!!!

    It's really easy to manually move stuff from iTunes to your phone using it as a USB drive. Open iTunes and plug in your Palm and choose USB drive when it pops up. When the window for the phone opens, you can drag and drop songs/podcasts from your iTunes library directly to your phone. After you eject your phone from the computer you will be able open the music player and you will see the files to play..... Haven't tried ringtones (I make my own) but I'm assuming its the same.....

  • Anyone else having trouble with media import in 10.2?

    I am having trouble importing media from a camera SD drive. It lets me see the file, but is not importing. When I select import nothing happens.

    David, I found a work around. I use a Canon XA10 and usually can just pull the SD card from it, plug in to my Macbook pro and download the file(s) I need. Not quite sure why it never downloaded last time. I opened the file I needed and saved it to the hard drive and accessed it just fine. Probably just a glitch, but wondered if this was an issue with the new 10.2. Will have to see if the problem continues to recur.

  • Can't Choose Songs With Media Sync

    I see my iTunes playlists in Media Sync but it won't allow me to select any of them, (won't let me check any boxes).
    Any advice would be appreciated. Thanks!

    You should try this.... it's a program made just for Itunes and Blackberry.... IT ROCKS!
    http://na.blackberry.com/eng/services/media/mediasync.jsp
    or if you just want to use blackberry desktop manager  uninstall your current manager and download this one
    it works with everything trust me.
    https://www.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB068C22&dl=...
    Message Edited by Jamesgrnstd on 12-24-2008 06:29 PM
    Please remember to resolve your thread.
    Put the check mark in the green box that contained your answer! Thanks

  • Trouble with first sync

    I have tried many times to sync my phone for the first time.  I make about 50% progress in the backup and that takes about 2 1/2 hours.  Then my computer starts acting up.  I lose control of my mouse and I stop making progress with the sync.  Does anyone have any help to offer?  I want to install an update but I can't until I backup my files and that's where I am stuck.  Thanks!

    Hi and welcome to the forums!
    Check the PC and disable any firewalls or virus protection programs, for the initial sync.
    Once the internet is accessed by the desktop manager software you can run normally.
    Thanks,
    Bifocals
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB16471&sliceId=1&docTy...
    Message Edited by Bifocals on 05-11-2009 05:41 PM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Having troubles with Media Encoder CS6

    Hello,
        I am having the issue with Media Encoder where the it tries to connect to the dynamic link server for a long time and then ultimately fails with the message Could not read from the source. Please check if it has moved or been deleted.  I have so far tried everything that I found online so far, that being uninstall and reinstall and creating the Premier shortcut in the Program Files (x86)\Common Files\Adobe\dynamiclink directory but nothing has worked.  I am queuing the job from Premiere Pro CS6.  I am not sure where to go from here and really need some help.  This is on a Windows 7 machine.  Thanks.

    There are several different ways to add a Premiere sequence to AME, see if either of these alternative methods work for you:
    Opt 1) Save your Premiere project, then drag your sequence from Premiere's Project panel and drop it into AME's Queue panel.
    Opt 2) Quit Premiere but leave AME running.  Drag your Premiere project file from the desktop (or wherever you've saved it) and drop it into AME's Queue panel.  You should see an import dialog asking you to choose the sequence you want to import.

  • I am having trouble with contacts syncing (CardDAV vs iCloud)

    I found that a number of recently added contacts do not sync across iCloud (devices). I have read several forum threads and can't seem to find a solution. I digging into my group text app (Text2Group) I discovered that somehow the missing contacts are not in iCloud but CardDAV. I added them in my phone by opening contacts and tapping on the + symbol in the upper right hand corner of the screen. I did the same thing over the years and never had this problem before upgrading to iOS 8 and then 8.1.1, or at least noticing it recently..
    I logged out and back in from both devices. turned off/rebooted my iPhone. The contacts I added today on my MacBookPro (13-inch, Mid 2009, 8 GB ram, OS 10.9.5) today appear on both my iPad Mini and Phone 5S....
    Any thoughts other than manually adding the phone CardDAV-contacts to iCloud so the will syn. All of the contacts in CardDAV can be found in contacts, but cannot be added to groups.  Baffling

    You can sync/manually mange iphone with one and only one computer.  If you sync/manually mange to anther, then it will erase the current content and replace with content from the new computer.
    What "trouble" are you having?

  • Trouble with Iphone syncing

    My Iphone has trouble syncing. Its a hand-me down phone from another friend. I cannot sync my Iphone to another computer and when I try to sync with wifi, it says it is not able to sync and sync would resume when my "friends-pc" is available. The device isnt shown in the itunes sidebar either

    Have you restored the iPhone once in your possession?  Since it was synced on your friends computer wifi syncing will also be looking for that computer.
    As for the device not showing up in iTunes try the Assistant.

  • Trouble with media player of nokia X2-01

    Hey, i am using Nokia X2-01. When i open the media player, it says'file not supportive'. When i open the song, i can hear it, the media player is not shown. And i cant even watch videos in it. Plz help me out with the trouble.

    Minnu30 wrote:
    file not supportive
    Is that your error message? Please double-check, because we need the message word-for-word.

  • BB 8900 trouble with iTunes sync - Mac

    Just upgraded my memory card to 8GB, and was able to sync some of my iTunes library via PocketMac.  I tried to sync again, but now I'm getting an error thru PocketMac "Feature Unavailable: No Media Card Present." Confirmed that the BB is attached to the MacBook via USB, restarted each, no change.  Anyone have any experience with this?
    Thanks.
    Matt

    Try formatting the card, and try again
    If I successfully help you with an issue, thank you for clicking "kudos" in my post.
    If your issue has been solved, please resolve this thread by marking the post which solved it for you!

  • I'm having trouble with the sync all feature and i'm not sure what to do about it

    i'm using Lr 5.3 on a windows 8.1 and a really fast laptop "can render movies in after effect in minutes"
    the problem i'm having is when i click the sync all button and the top loading bar moves like everybody, only the pictures viewed in my bottom slider will change even if i leave it for hours and this happen with big and small number of pictures so i tried reinstalling it and that didn't work
    i do a lot of timelapses and i thought maybe if i export the video they will show with the edited settings and that didn't happen and it showed the pictures that i havent moved to view blured, like the same blue when you move fast between raw pictures
    so i t tried exporting them and that worked fine but takes ages, the pictures still didn't change in the viewer but all the exported pictures did and thats not helping me in my job !
    FIND ME A SOLUTION please cause i'm dealing with 500-1000 picture here and i need to move the slider every 20 sec or so every picture is changed and this takes time and effort  guys !

    It could be overheating..........thing is ....i never realy though ibooks got that hot....the ibook does not even have a cooling fan...at least my blueberry 300mhz doesn't.
    I would have to say sounds more like your hard drive may be starting to fail you.

  • Having trouble with Audio Sync in FCExpress

    Hello, everyone...a question for the board.
    I recently acquired a new iMac with Final Cut Express...planning to try some video editing at home.
    I haven't been successful with the proper configuration for captured video, however...using a Sony TRV-900 as my source, video feeding in via firewire 800 (I bought a 400/800 adapter to make it work), and ingesting using NTSC Basic...however, my audio is still not in sync with the video--the video is always ahead, and it jumps further ahead the more I ingest.
    Is there some configuration I need to use so that the audio syncs correctly? Is it, as I suspect, a drop-frame issue that I haven't set up correctly?
    Any help you could throw my way would be very much appreciated.

    I realize that most DV cameras will record in 32 and 48 sampling rates. What I'm trying to get you to do is see what you've ALREADY recorded.
    Open one of the captured clips in QuickTime, then hit Command j to see the movie properties. Or in FCP, right-click on a captured clip and choose Item Properties to see what audio you are trying to capture. Once you know that, create a Sequence with those settings, then capture any remaining footage with those settings. If needed, recapture any footage that was previously captured using the wrong settings.
    -DH

  • Need help with Media Sync PLEASE - can't sync pictures

    I just installed the newest version of desktop software, v6.0, and when i click on the buttons to sync pictures from my blackberry to my PC, it says there are no pictures available....i have dozens of pics on the device and i really want to get them off ASAP...please help
    Solved!
    Go to Solution.

    Try turning OFF Mass Storage. Is encryption still enabled for Media Files in your device?
    If it is, Roxio should ask for the encryption password to allow you to access the media card.
    When it does, all media should be visible...

  • Trouble with Missing Sync

    Hello all,
    I am currently trying to get data from my treo 680 onto my mac (in mac address book, ical, etc formats) so that I can eventually put them on an iphone. I am using a program called missingsync which supposedly does this, however i am having much difficulty finding where the backed up files are going. The program says they have been successfully backed up however I can't find them anywhere on my mac. Does anybody have any experience with Missingsync that could help me out? (I tried calling tech support, its an answering machine). Thanks in advance.

    Welcome to Apple Discussions.
    Have you read the User Guide bundled with the Missing Sync for Palm OS? Are you not aware that files stored on your Palm device are written in this manner:
    • contacts to the Address Book
    • events and tasks to iCal?
    Are you talking about 'transfering' or synchronizing your data now stored in your Palm device with your Macintosh desktop or portable computer, or backing it up using the standard Palm backup conduit?
    Are you aware that Mark/Space offers a specific application designed to do just what you want to do, and provide ongoing support for iPhone features not supported by iTunes?

Maybe you are looking for

  • Calling the Java Method in PL/SQL Java Stored procedure errors out

    Hi, I could not find a suitable thread to post my PL/SQL question so iam posting it here......... I have written a java class by name XYZ which has a method ABC for which there are 9 arguements being passed and its a VOID method. This java class has

  • Iphone 4 update to ios 5.1 twice?!

    I updated my iphone 4 to ios 5.1 a few weeks after it was released from iphone software update in settings, not through itunes. presently when the phone is connected to itunes and i click on check for updates: everything is up to date. however, now t

  • My hard drive crashed..what to do?

    Hi, My hard drive crashed..What should i do now? Is there a way for me to upload the content of my ipod to a new/blank itunes library (on my new hard drive), eventhough i understand that it usually works the other way around (itunes to ipod)? Any hel

  • Read Routing and work center details from transfer order

    Hello I am using transaction LT31 to print a form for the transfer order. The customer wants me to print a field that is in the work center details of the routing for this material and plant. I can see this data with transaction CA02 where i enter ma

  • Changing link in CUC Notification email?

    Does anyone know how to change the link for the notification email (SMTP) and put in a different URL to access the server? The customer would like to have their external DNS name on the email for the users so they can click on it to get to the PCA we