Trouble with Menu and sub menu widget

I am a newbie, hence my current question. I have developed a site for the company that I work for, the basic navigation menu widget has been added, however, the owner wanted a sub-menu for only one of the categories/menu tab, but I am having trouble getting/adding a drop down for one of the menus, it is doing an all or nothing when I try to add the submenu, regardless of only editing the one. What am I missing?

Thanks, that is exactly what I was missing. And that did the trick. I know it was probably a dumb question, but I'm still learning my way around the Muse.

Similar Messages

Menu and Sub Menu in Flash

I have discover dis site http://vista-buttons.com/
It makes flash menus the way i want.
It wourth 50€ for it or there is a better way to do menu and sub menu in flash ?
Best Regards

For the amount of time it would likely take you to create your own, it's up to you to decide whether or not it's worth the cost. Just note that the cost varies based on your intended use of the product. The non-commercial version is $50.

Menu and sub-menu

Hi,
Is anyone knows where to find an example for creating the menu and sub-menus in coldusion?
thanks
kt

here is a simple example using cfmenu:
<cfmenu name="menu" type="horizontal"
 fontsize="14" font="Verdana, Arial, Helvetica, sans-serif" bgcolor="##ff9f40;"
 selecteditemcolor="##dd6b04" selectedfontcolor="##FFFFFF" menustyle="border: 1;">
 <cfmenuitem name="cfdiv" href="test1.cfm" display="Test1" />
 <cfmenuitem name="cfdiv2" href="test2.cfm" display="Test2"/>
 <cfmenuitem name="JavaScripts" display="JavaScripts">
 <cfmenuitem name="test3" href="test3.cfm" display="test3"/>
 <cfmenuitem name="test3a" href="test3a.html" display="test3a"/>
 </cfmenuitem>
 <cfmenuitem name="Examples" display="Examples" >
 <cfmenuitem name="cfgrid" href="cfgrid.cfm" display="CFGrid"/>
 <cfmenuitem name="cfgridwin" href="cfgridwindow.cfm" display="CFgrid in Popup Window"/>
 <cfmenuitem name="monthDay" href="ymd.cfm" display="day base on month selected"/>
 </cfmenuitem>
 <cfmenuitem name="cfmenu" href="http://tutorial16.learncf.com/demo/16" display="cfmenu on the fly"/>
</cfmenu>
hope it helps.

Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?

If this happens on monitor 2 of 2, this problem has been solved here:
http://support.mozilla.com/en-US/questions/794823#answer-157988
Go to "Firefox"--> "Options" --> "Advanced"
Then un-check "Use hardware acceleration when available"
While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.)

I need help with adobe muse sub-menu styling

i need help with adobe muse sub-menu styling~! i can adjust them to exactly how i like them, but then when i go to the next set of sub-menus, the other ones revert back to the starting white/black boxes. i am frustrated as i have redone this so many times! Please help me!

To achieve this, you can use an accordion widget with custum styling.
IF you search for Terry White, Muse, accordion, you will find some video tutorials on YouTube.

Can't access in Finder Contextual Menu the sub-menu named More

Hi!
I was trying to learn how to use Automator, in the web page
http://www.macosxautomation.com/automator/examples/ex03/index.html
and I realize that I can't access in Finder Contextual Menu the sub-menu named More for choose Automator > Create Workflow... from the sub-menu.
Someone can help me to configure the finder in order to

That page is out of date since it doesn't reflect the change in Snow Leopard that did away with the More contextual menu. Try this. System Preferences->Keyboard->Keyboard Shortcuts->Services->Development->enable Create Workflow. Close the prefPane, select the object, CONTROL-click->Services->Create Workflow.
If that solves your issue, then send a message to the page's developer and ask them to update it.
BTW, see http://discussions.apple.com/thread.jspa?threadID=2241804 for a four-parter by Sal Saghoian on *Automation in Snow Leopard*
and this, which describes the old and new automator—services stuff:
http://www.reynoldsftw.com/2009/08/automator-and-finder-interactions-in-os-x-10- 6/

TO ALL THOSE HAVING TROUBLE WITH ICHAT AND AIM ON MACBOOKS

I've had a lot of trouble with AIM and iChat on my new Macbook, but I believe I've figured out the answers to all the problems I and others have encountered.
Firstly, for those who's AIM continually crashes and displays the message "The application AIM unexpectedly shut down," my answer to your problem is too many sent messages. Watch the bar in the bottom left of your chat window, when it reaches red, your application will probably shut down.
Secondly, for those experiencing difficulties with iChat, it's most likely a problem with communitcation between your wireless router and your computer. Try these steps:
1. From the Apple menu, choose System Preferences.
2. From the View, choose Sharing.
3. Click the Firewall tab.
4. Click New.
5. From the Port Name pop-up menu, choose Other.
If you have a Macbook, you'll probably have a TCP Port Number Bar and a UDP Port Number Bar. Try these steps:
1. In the TCP Port Number(s) Bar, type: 5190, 5298
2. In the UDP Port Number(s) Bar, type: 1024-5219, 5221, 5223-65535
3. In the Description Bar, type: iChat AV
4. Click OK
5. Click Start above the window with your firewall settings, and make sure the box next to iChat AV is checked
6. Relaunch iChat
Good Luck! I hope this solves some of the problems that people have been encountering.

Rob
My Linksys is the WAG54G, which might be different from your WRT54G. Currently, UPnP is disabled and the Router ports are a bit of a mystery, because they're forwarded to an IP address that's outside of the current DHCP Address Range! Once I got it working, I was reluctant to change it even though it looked anomalous.
The Firewall is on, with the iChat ports open that I listed in the previous post.
My two regular buddies are my sons, who both use Trillian Pro on a Windows machine. Works pretty well despite occasional freezes or garbled sound.
Hope you get sorted soon.
Dave

I am having all kinds of trouble with itunes and updating my ipad. when I open up itunes, it seems to just sit there, never going to itunes store. when I connect my ipad, I check update and it starts, but then I get this message:backup can't be saved on

I am having all kinds of trouble with itunes and updating my ipad. I open itunes up but it doesn't do anything except open to a blank screen. I try to access the itunes store but it won't go there. When I connect my ipad, and try to update it, it starts and then I get a message that says backup cannot be saved on this computer. I have tried everything suggested to no avail. This is the 2nd or 3rd time I have had problems with itunes. Sometimes I even get a message that I am not connected to the internet.
I have uninstalled and re-installed. Any help?

You might not have enough space left on your hardrive.

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Hi FuzzyDunlopIsMe,
Welcome to the Support Communities!
It's possible that resetting your password multiple times has triggered this security. Click on the link below for assistance with your Apple ID Account:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Here is some additional information regarding your Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account.
Cheers,
- Judy

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???

It's only Safari/iOS7. Chrome iOS7 works fine.
Solution?
Go to YT and grab the code.
Paste it in a HTML Snippet.

I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. Can I go back to the older version? I had no trouble with that and I do not like this new version at all.

I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. I went to the forums and tried all the suggested fixes but none worked. Can I go back to the older version? I had no trouble with that and I do not like this new version at all. I tried a system restore twice and it did not fix the problem.

I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet.

Trouble with Mail and Maverick

Trouble with Maverick and Mail - contacts (groups) will not load into address bar in mail.

Check that the mac's preferences for icloud is still connected to the proper account. Be sure photo stream is turned on.
You haven't described what "trouble" your mail account has.

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

BIWS with Breaks and Sub-Total

Hi All,
Created a simple report with Breaks and sub-total and then i exported that report block as BIWS. When I test it in the BIWS Manager, I can able to see the break data with sub-totals. But when i try to connect the same BIWS with Dashboard, am getting only the detail rows and am not getting the sub-total rows.
Please suggest how to go over this issue.Thanks for your time and support.

You have any idea now ‘nbLines’ works? If its returning total row count, then i think we can try some options with it. Basically am trying to get data like below to apply combo box selectors on Year and Country.
Year
Country
Sales
2013
India
100
2013
US
200
2013
UK
100
2013
Total
400
2014
India
100
2014
US
200
2014
UK
100
2014
Total
400
Total
Total
800
But am getting it as below, if i apply combox box on Year and Countyr, am getting blank value in between list of values.
Year
Country
Sales
2013
India
100
2013
US
200
2013
UK
100
2014
India
100
2014
US
200
2014
UK
100
2013
Total
400
2014
Total
400
Total
Total
800
Thanks

Trouble with export and import

I am having trouble with export and import
here is what I did...
exp "'/ as sysdba'" PARFILE=parfile.txt
PAFILE
TABLES=user1.Table1
file=Table1_1006.dmp
LOG=Table1_1006.log
query="where to_char(processeddate,'YYYYMMDDHHMISS') between to_char(to_timestamp('1911-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS') and to_char(to_timestamp('2011-10-06 16:46:26','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS')"here is my log from export
set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
Current user changed to user1
. . exporting table Table1 16019049 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.Then I started importing
/database2/rdbm15> imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log
Import: Release 10.2.0.5.0 - Production on Thu Oct 6 19:57:01 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
. importing user1's objects into user1
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "Table1" ("APPROVALTRACEID" VARCHAR2(64), "REQUESTOR"
"EID" VARCHAR2(9), "EID" VARCHAR2(9), "FIRSTNAME" VARCHAR2(32), "LASTNAME" V"
"ARCHAR2(32), "MIDDLEINITIAL" VARCHAR2(8), "TIER" VARCHAR2(3), "JOBTITLE" VA"
"RCHAR2(64), "JOBCODE" VARCHAR2(10), "EMPLOYEETYPE" VARCHAR2(2), "CONTRACTOR"
"TYPE" VARCHAR2(2), "EMPLOYEESTATUS" VARCHAR2(2), "COSTCENTER" VARCHAR2(10),"
" "COSTCENTERDESCRIPTION" VARCHAR2(50), "CONTRACTENDINGDATE" VARCHAR2(8), "A"
"CCOUNTSTATUS" VARCHAR2(2), "LOGINID" VARCHAR2(70), "APPLICATIONGROUP" VARCH"
"AR2(50), "APPLICATIONNAME" VARCHAR2(50), "APPLICATIONID" VARCHAR2(12), "LEV"
"EL1" VARCHAR2(512), "LEVEL2" VARCHAR2(512), "LEVEL3" VARCHAR2(512), "LEVEL4"
"" VARCHAR2(512), "LEVEL5" VARCHAR2(512), "PROFILECODE" VARCHAR2(50), "PROCE"
"SSEDDATE" DATE, "APPROVERMANAGEREID" VARCHAR2(9), "APPROVERMANAGERDELEGATEE"
"ID" VARCHAR2(9), "APPROVERT4MANAGEREEID" VARCHAR2(9), "APPROVERT4MANAGERDEL"
"EGATEEID" VARCHAR2(9), "APPROVERAPPOWNEREID" VARCHAR2(9), "APPROVERAPPOWNER"
"DELEGATEEID" VARCHAR2(9), "PERFORMEREID" VARCHAR2(9), "NATIONALID" VARCHAR2"
"(30), "COUNTRYCODE" VARCHAR2(9), "PASSPORTID" VARCHAR2(20), "DATEOFBIRTH" V"
"ARCHAR2(15), "CITYOFBIRTH" VARCHAR2(15), "VENDORNAME" VARCHAR2(50), "VENDOR"
"MANAGERNAME" VARCHAR2(50), "VENDORMANAGERID" VARCHAR2(9), "VENDORADDRESS1" "
"VARCHAR2(100), "VENDORADDRESS2" VARCHAR2(100), "VENDORSTATEPROVINCE" VARCHA"
"R2(15), "VENDORCOUNTRYCODE" VARCHAR2(9), "VENDORZIPPOSTALCODE" VARCHAR2(9))"
" PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 4076863488 "
"NEXT 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) "
" LOGGING NOCOMPRESS"
Import terminated successfully with warnings.but I did not get rows to database2
[server1]database2
/database2/rdbm15> sqlplus / as sysdba
SQL*Plus: Release 10.2.0.5.0 - Production on Thu Oct 6 19:59:17 2011
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select count(*) from user1.Table1;
COUNT(*)
 0
SQL> exit
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - ProductionEdited by: user3636719 on Oct 6, 2011 5:23 PM

user3636719 wrote:
Thanks for the reply...
Old EXP IMP doesnt have capability to append the row, since you're using 10g use datapump instead. use option TABLE_EXISTS_ACTION=APPENDso my import should be like this
imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log TABLE_EXISTS_ACTION=APPEND
Did you look up the command line syntax and control options for imp?
You should make it a habit that whenever anyone - especially a stranger on the web - gives you a bit of code or references a command or init parm or any some such, the VERY FIRST thin you should ALWAYS do is look it up for yourself and see exactly where and how it is used and what it means. That is how you grow beyond having to be spoon fed every little thing and become more self-sufficient.
If you had, you would have seen that there is no TABLE_EXISTS_ACTION option for imp and seen that it is an option for impdp. And realized that exp and imp are NOT the same thing as expdp and impdp.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Trouble with Menu and sub menu widget

Similar Messages

Maybe you are looking for