Trouble with MIDI mapping in Logic Pro 9 and 10

Hi!
So I recently bought a Novation Launchkey 25-key keyboard and, as it doesn't map automatically to barely anything, I've been trying to MIDI map it so I can control certain parameters wih the knobs. I've done the learn assignment thing and everything as I found here http://www.logicprohelp.com/forum/viewtopic.php?t=432, but there's this problem: I can't control parameters fully. I'm going to make an example:
I've got the Delay Designer opened, and I would like to control the "Sync" knob with one of the keyboard's knobs, so it map it to do so, but when I turn the hardware knob it goes directly to 100. I mean, I turn the knob just a bit and it goes from 0 to 100, skipping all the other values. This happens with every instrument / effect in Logic Pro 9 but also in Logic Pro 10.
I dont' know if anything else is having this issue, but it's really annoying and I hope you guys can help me fix it...
So, as always, thanks!
And cheers!

And sorry for my poor explanation... English is not my mother tongue!

Similar Messages

Trouble with Midi controls!PLEASE READ AND HELP ME

Hi everyone i just bought an akaimpd32 and am having trouble sending sounds to my midi device to create a preset perminate bank in my mpd... i am new to this program and really have no idea what is going on! i just want to figure out how to send messages or sounds to my MPD if anyone knows what im talking about please please help me out!

Oh and yes i am using logic express 7... lol and if anyone else can tell me how to sample a song in Logic as well that would be AMAZING! thanks again

Help needed in connecting two midi keyboards to Logic Pro.

Hey there, I would like to connect two midi keyboards to Logic Pro and enable each keyboard to trigger separate software instruments each. For example, one keyboard has guitar and the other has strings.
I realise this must have something to do with midi channels or ports, however my knowledge is limited.
At current, I just have the two keyboards connected via usb straight to the computer. Is it possible I need a multi input or output interface, so that Logic can recognise different ports, or channels? Perhaps there is simply something I need to do in Logic itself? the keyboards are basic M-Audio midi controllers, just a usb port - thats it, no other connections. Any help would be great, Brad.

Hey Brad,
yes you need also to change the out midi of the keyboards.
in my case I have the Keysation 61 es, it's done this way:
"Channel
MIDI data from the keyboard can be sent on any of 16 MIDI Channels. However, certain MIDI devices and MIDI software applications require
the keyboard to send data on a speciﬁed channel. If this is the case, you can change the channel the data is sent using the following
method:
< Press the Advanced Functions button to engage Edit Mode.
< Press one of the 16 Channel keys from D1 to E3, according to the Channel that you need.
For example, if a device speciﬁes that you need to send data on Channel 10, press the Advanced Functions button, and then key F2 to select
Channel 10.
The Channel can also be assigned to the Octave “+” and “-” buttons. Once assigned, pressing “+” or “-” will increase or decrease the channel
incrementally. When Channel 16 is reached and “+” is pressed, Channel 1 will be selected. If the Octave “+” and “-” keys are selected to vary
the Channel, the lights above the buttons will not change, since it is not possible to have a Channel with a negative value. Pressing both the
“+” and “-” buttons together will recall Channel 1."
Can you please tell me what keyboards do you have?
this is for two players having a go on completely 2 different parts.
In case you want to record 2 tracks with the same content say a piano and a pad,
all you need to do is open the tracks and rec enable both and you have piano pad.
Anyway I believe you need to have two separate sounds for two players?
Give us some more input of what you want, there must have one or more solutions to what you need.
Cheers mate,
Jorge

TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
Have a nice day!

Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

Hi Kurt,
The Mac IIci is not even powering on at all. Tried again with wih a tested power cable and no luck.
I think it's best that take this issue to the Older Hardware Community. Not only did I see a fair number of replacement parts for the IIci avaiable online, but there also vintage external floppy drives as well. I'm not giving up.
Thank you for your time and interest in helping.

Is macmini enough for a musician that works with logic pro and 10 plugin softsynth at the same time?

I use to work with a music platform like garageband or logic pro and at the same time I am working with a lot of plugin software like toontrack, ik multimedia, musiclab, native instruments etc. On my PC which has the same specification as macmini i7 2.3GHz this was a big problem especially when I was selecting effects like reverb, chorus or compressor so I had to export tracks all the time. What is the minimum specs that I should have to work without any problem? Any help will be appreciated.

Welcome to Apple Support Communities
For what you want the Mac, the Mac mini is OK. It has got a quad-core processor that will give you the performance you need and 4 GB of RAM that you can extend to 16 GB, apart from a removable hard drive.
The problem is the GPU, but as the applications you are going to use don't require the best GPU, it will work properly. If you want the Mac mini, go for it. An iMac may give you better performance, but the Mac mini is correct.
If you buy it from Apple, you have 14 days to return the Mac mini if it doesn't work correctly with the apps you need

Will Lion work ok with Logic Pro and 3rd party plugins?

Will Lion OS work ok with Logic Pro and 3rd party plugins?
Any help would be much appreciated,
Regards James

Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
Both Sylenth and Vanguard are 32bit plugins...
...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

Audio Unit Problem with Logic Pro and Mainstage

When I go to launch my apps, both Logic Pro and Mainstage get stuck loading an AppleAUspeechsynthesis or something along those lines. It never makes it past there and I either have to force quit or it quits itself. I can press control while launching Logic Pro, but then I only get basic MIDI. I just tried an archive and install and I'm in the process of reinstalling Logic Pro right now. Does anyone know what might be causing this?

I just tried pasting my crash report. It seems like it is too long to post?

Logic Pro and downloading additional content trouble.

I just downloaded the latest Logic Pro and opted to download all additional content. Some of the content that finished downloading would ask for my password to finish the download and others would say "cannot be completed" or something like that... When I'm in Logic Pro, if I want to use "Electo-trance" drums, it cannot be found. Did I do something wrong? also, I have 650g of space and computer is only used for school work.

There is another possible fix that I have just been made aware of, thanks to Apple Tech Support...
Go into Energy Saving in System preferences.. and temporarily move the two sliders (for screen sleep and computer sleep) to never, uncheck "Put hard Drives to sleep whenever possible" and then download additional content..
When the downloads are complete, put back these settings to their original state...
For some people this has provided another way of avoiding the 'timeout' if it has not been caused by an ISP's max file limit rule...

Problem with midi on my Macbook pro

Ok, so i've been having this problem for a while now...i came on the forums before and asked about it, and people said to get more RAM...so i've done that...
Before I thought it was a CPU issue, but now i'm realizing it has something to do with MIDI.
I have Pro Tools and Logic on my computer, and whenever I load a MIDI instrument into either program, the CPU usage goes way up...way more than it should. I don't know why this is happening. Right now I only have one piano loaded in Pro Tools and it's taking up so much CPU that the sound cuts in and out. In Logic, the CPU bar goes all the way up.
Does anyone have a solution for this? It's got something to do with the midi...if i bounce the midi track to make it an audio track it works fine. Also, if i restart the computer or close & open the program again it tends to work a little better for a limited amount of time...
I'm running a 2.2 Ghz 2007 Macbook Pro with 4 GB Ram that i recently put in. I have a lot of the MIDI sounds on an external hard drive, but both the external sounds and sounds that are on the computer itself have the same problem.
Thanks,
TJ

?

Ich nutze Logic Pro um Midi-Files zu bearbeiten. Unbearbeitete Midi-Files werden von Qmidi mit deutschen Buchstaben ä, ö, ü, ß wiedergegeben. Sobald ich das midi-file mit logic-Pro bearbeitet habe werden die Buchstaben nicht korrekt wiedergegeben

Ich nutze Logic Pro um Midi-Files zu bearbeiten. Unbearbeitete Midi-Files werden von Qmidi mit deutschen Buchstaben ä, ö, ü, ß wiedergegeben. Sobald ich das midi-file mit logic-Pro bearbeitet habe werden die Buchstaben nicht korrekt wiedergegeben. Dies passiert auch, wenn ich keine Änderungen im Midi-File vorgenommen habe. Bei Qmidi kann ich die Schriftarten / Einstellung " Western ( ISO Latin 1 ) " eingeben und diese Buchstaben werden korrekt erkannt. Es muss daran liegen, was Logic Pro aus dem Midi-File macht.
vielen Dank für Eure Hilfe im voraus
I use Logic Pro to edit midi files. Unprocessed Midi-Files reproduced from the programm "Qmidi" with German letters ä, ö, ü ß. Once I have edited the midi-file with logic-Pro are not correctly play back the letters. This also happens when I have not made any changes in the midi file. In Qmidi I can the font / setting "Western (ISO Latin 1)" and enter these characters are correctly recognized. It must be because what makes Logic Pro from the midi file.
Thank you for your help in advance

That's clearly a bug. Please send this to Apple using their feedback form:
http://www.apple.com/feedback/logic-pro.html
Best,
DaCaptain

Midi out in Logic Pro 8?

I cant seem to find the settings for Midi out in Logic pro 8. IM trying to set up IPmidi and cant make it happen.
Anyone know where it is?
ipmidi: http://nerds.de/en/ipmidi.html

Sorry... I cannot help you...
but
I prefer Cables... IP is not a good idea for midi...
it require to stay with File sharing on!
it is not a good idea!
G

Trouble with MIDI, redirecting MIDI out to Line-out???

Hello
I have yet another question regarding Logic pro and MIDI. I've plugged my keyboard via MIDI to my TC konnekt 8 audio interface, which is then plugged via firewire to my laptop. I've succesfully been able to record a track and now i want to actually hear it. I know im able to hear it via the Midi connection from my interface to the keyboard, but is there a way to "redirect" the output from my MIDI track to the Line-outs on my interface, so that i can hear it on my studio monitors instead??

I know MIDI has nothing to do with audio, but there might be a way to convert it to audio.
I just wanna hear my MIDI recorded track without going through the MIDI out/the speakers in my keyboard.
The keyboard is playing the audio, under instruction from the MIDI commands. To record the audio, or patch it through your interface, you must cable up it's audio output.
Garageband is a hugely simplified version of Logic. Of course Logic can do anything GB can do.

So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

I have a mid 2007 mac book pro and i cant get mac osx mountain lion

i have a mid 2007 mac book pro and i cant get mac osx mountain lion
please get back to me and it says on the apple website i would be able to get it

I would make sure it's deffinetely a mid 2007, and that's not just when you purchased it. Also you need at least 2GB of RAM and an intel core 2 duo processor with 8GB of HD space.

Trouble with MIDI mapping in Logic Pro 9 and 10

Similar Messages

Maybe you are looking for