Trouble with mouse click

I used to have a LOGITECH but reverted to the wired APPLE mouse that came with my computer. My problem is when I try to click on a file ONCE to : let's say change a file name or edit a file ...it'll open a file in a program I didn't command it to. A good example are sound files I'll try to edit an audio file name but the single click causes QUICKTIME to open the file and play it...very annoying when you are try to navigate your files. Thanks

yes but the problem exists even going back to the old mouse with wire. I need to reiterate that the problem didn';t exist in early summer when I was using the LOGITECH mouse only sometime during June I began to notice the trouble and it's there with the (wireless) LOGITECH and/or APPLE mouse (wired USB). Mystery unsolved. Thanks for responding.

Similar Messages

K9a2 platinum motherboard, trouble with mouse/updating bios.

Hello all, I have a MSI K9A2 Platinum mb, using vista 64 bit. I wanted to flash my bios, Pretty sure I have 1.4, wanted to try 1.8, or 1.9. When I go to download center will ask me where I want to download from, I click on U.S nothing happens, even tried the other countries nothing. Up top tab will say blank page and go back to download center. Reason I wanted to try and flash my bios to update it is. I have a USB razer lachesis which I have to unplug and plug back in several several times a day, Im having trouble with it lagging or stuttering. I have tried every driver update new and old and nothing works. I have unchecked enhance pointer precision, I have tried every usb port on my computer. Nothing. I have tried updating my video card, on board sound drivers, mouse drivers nothing. Im at a lost. I have no clue on what else to try. Do you think updating my bios will work? Thank you all for reading this. Hope it makes sense)

Quote from: Stu on 12-April-11, 02:42:09
Get another mouse. I bought a Razer Copperhead a few years ago, and had similar troubles on several different boards. I just use cheap generic mice again now, they just work.
QFT
I just use some leftover kensington notebook mouse (ci25m), even though its small it fits my fingers(not my palm, just my fingers ..because my hand/palm is huge lol) and it just works. The only time I bought a really spendy mouse (creative fatality) I only ever had problems with it.

Problems with mouse clicks..

Hello.
i�m having problems with the mouse clicks in a component...
i have events that occur when a click is given and others when 2 clicks are given, but these events occurs only once a while....it�s not always that they occur...
can anyone help me with it?? it�s very strange...
thanx

How about copy and pasting your mouseClicked or mousePressed methods. Are you sure you know the difference between a click and a press?

Trouble with Mouse

I have a logitech 570 wireless mouse and it is working great in every other program, still I did a troubleshoot on it and everything seems to be working fine.
In Indesign CS5 after I have selected the text tool I cannot then select anything else. Not fonts, not swatches and not other tools. To get back to the "selection tool" I have to select "v" and "esc".
Can anyone help me with this. I have checked and have all updates for this program also.
"Help me Obiwan Kenobi's you are my last hope!"
Dana

Operating System?
If it's windows, is it this: InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)

Firefox 9.0.1 with Flash player not catch keyboard event with mouse click.

In a flash application, I need select mutil items using shite key and mouse click, it is not working. looks like firefox didn't pass the keyboard even alone with the click event. This happen on Window 7, IE and Chrome have no problem. only FF

i have the same problem everytime i open a website with flashcontent firefox freezes and i have to kill the flash process to unfreeze the browser the only way i can see a youtube video is in html5 mode.
Hardware
Acer aspire 4553
Turion X2 p520
3gb of ddr3 ram
Ati Mobility Radeon 4250

K9A2 Platinum trouble with mouse.

Hello all, Im having trouble with my K9A2 Platinum and my Razerr Lachesis usb plug in mouse. I have to unplug and plug my mouse in several times a day due to my mouse curser jumping all over the place. I have downloaded the 1.94 razer firmware and still does not work. At first I thought this was a Razer issue, Now I know its a msi issue. I know several people who have the K9A2 and have the same trouble with there mouse. The mice they have are all random and not just razers, different products. I have tried every driver. Old drivers, new drivers, different combinations of drivers and nothing works. Have tried plugging to the back of my Razer tarantule. Have tried different usb ports, nothing. Will take all the help I can get please. I have googled this and have tried everything. To the point if I have to get a new motherboard, trust me it will not be a MSI one. I have spent a lot of money building this rig. Any advise please. Thank you all for reading.

Enter SafeMode and DeviceManager. What relevant mouse(s) and possibly HID-devices do you find?
The skipping mouse can come from an auto-starting program or virus. That is something that would not be seen in SafeMode, too.

Issues with mouse clicks/jumps after using CleanMyMac App.

Since using this app. my hitherto slightly slow responding iMac has required multiple mouse clicks and is less/unresponsive.
Anyone else used this software?
As yet have not approached CleanMy Mac.
I have reinstalled Mountain Lion (download) not clean install.
Any suggestions? Is there a separate app for mouse that I can reload. Im guessing a minor chunk of code was deleted along with rubbish.
Reg25x

Uninstall CleanMyMac and do not reinstall it.
CleanMyMac is one of a broad category of time- and money-wasters capable of causing system corruption that can only be rectified by reinstalling OS X, restoring from a backup, or completely erasing your system and rebuilding it from the ground up. Get rid of it and test your Mac for operation. If it does not perform normally, the possibility that Cleanmymac resulted in system corruption must be considered.
The vast majority of Mac problems reported on this site are the direct result of having used garbage like that. Never install such junk on a Mac.

Character movement with mouse click

This will be for an MMO online game/ world. So it needs to be good.
Hi guys. I'm really happy I got this to work as I'm a neebie to AS3 but getting to love its simplicity. My problem is not my AS3 but my maths.
I click the mouse and the movieclip runs to the mouse's x position. However, it only goes in one direction ie: downwards and to the right.
I need to it go in all directions depending on where I click. I suppose it has to do with comparing x and y positions of both mouse and mc - ie: if one is bigger than the other then you can tell where both are positioned and then put the code in. Am I right and does anybody hace a little code like this flying around for me?
import flash.display.Stage;
import flash.events.Event;
stage.addEventListener(MouseEvent.CLICK, myClickReaction);
function myClickReaction (e:MouseEvent):void{
    sunny.gotoAndPlay("runback")
    //sunny.x = root.stage.mouseX
    //sunny.y = root.stage.mouseY
    addEventListener(Event.ENTER_FRAME, onEnterFrame);
function onEnterFrame(event:Event):void {
             var xDistance:Number
             var yDistance:Number
            //mc increments by 5 until it reaches mouse - mc (ie the distance)
            sunny.x += 5;
            sunny.y += 5;
            xDistance = root.stage.mouseX - sunny.x
            trace (xDistance)
            if (xDistance <= 0 ) {
            trace("works")
            sunny.gotoAndPlay("static")
            removeEventListener(Event.ENTER_FRAME, onEnterFrame);

Thanks for contacting but the code more or less works already apart from the comments below.
The position I get comparing mousex position and movieclip position. BUT it goes loopy when I move the mouse around. ie: I need the coordinates when I click and not a variable that changes while I move mouse around.
I will check it out now.
import flash.display.Stage;
import flash.events.Event;
stage.addEventListener(MouseEvent.CLICK, myClickReaction);
function myClickReaction (e:MouseEvent):void{
//sunny.x = root.stage.mouseX
//sunny.y = root.stage.mouseY
addEventListener(Event.ENTER_FRAME, onEnterFrame);
function onEnterFrame(event:Event):void {
             var xDistance:Number
    var yDistance:Number
   //mc increments by 5 until it reaches mouse - mc (ie the distance)
            // if you click to the right of sunny then mouse is > than sunny.x so x = 5
   if (root.stage.mouseX > sunny.x) {
    sunny.gotoAndPlay("walk right")
    sunny.x += 5;
    sunny.y += 0;
    xDistance = root.stage.mouseX - sunny.x
    //if (xDistance <= 0 ) {
    //sunny.gotoAndPlay("static")
    //removeEventListener(Event.ENTER_FRAME, onEnterFrame);

Desktop files won't open with mouse click

I'm sure this has an obvious solution, but I can't find it.
(I'm on a new Powerbook G4 running Tiger)
When I try to open a folder or file on my desktop by double clicking it, nothing happens.
However, when I click once on the folder/icon to highlight it, then hit Command + O, it opens/launches.
I want to be able to open files with my touchpad without having to use the keys. Is there a setting for this?
Thanks!!!!
Powerbook G4 15" Mac OS X (10.4.1)

You might want to go into the System Preferences under "Keyboard & Mouse" and check your double-click settings. Also, if I understand correctly, to click using the trackpad itself, you can select "Clicking" under the trackpad options.
PowerBook G4 12 1.5GHz and a bag full of goodies! Mac OS X (10.4.4) 80GB HD, 512 MB ram, 300GB Maxtor OneTouch II FireWire 400 External HD.

Bluetooth Trouble With Mouse and Keyboard

Symptoms of problem: Message indicating that mouse is not connected. Mouse becomes inoperable.
Related clues:
After selecting "Browse Device" from the Menu Bar, Bluetooth icon, drop-down menu, the mouse is listed in the Browse Device window...the keyboard is not listed. The message "Searching for Devices - 0 Found", followed by "Found - 0 Devices" appears every few seconds.
When the Bluetooth icon in the System Preferences is selected, both the mouse and the keyboard are shown to be - On, Discoverable, Paired, and Connected.
There would seen to be nothing interfering with the signal, although I did enable a new 1.9 GHz wireless phone system just prior to experiencing the Mouse trouble.
???

So the first thing that I would do is disable the phone system and see if the issue goes away. If it does you most likely have your answer to the cause. However, BT is supposed to be confined to the license-free ISM band at 2.402-2.480 GHz which would seem to be well away from the phone's frequency.
Dah•veed

Troubles with the Click Wheel (or whatever the "technical term" is) HELP!

My iPod works pretty well, except for the click wheel (or whatever you wanna call it). It scrolls fine, but when it comes to trying to press the menu button, or even sometimes when I try to press the play, forward or backward button, it seems to think I'm pressing the center select button instead, selecting something on the screen instead..
If anyone can help, I'd really appreciate it! (I posted one earlier but I'm new at this and was told I should make the subject more specific..
Thanks!
*Ace
(P.S. It's not the iPod with the four buttons across the top- it's one with just the wheel and the center select button)

I still need help please!
When restoring the iPod, that erases everything on the iPod, correct? Would I then have to do all that stuff you have to do when you first get the iPod, like registration type stuff? Does this mean that everything in iTunes will be erased as well? (I have purchased a lot of music that is not on a CD..)
sorry, many questions in one... thanks for the help though!

Trouble with mouse wheel button!

How to enable scrolling in JScrollPane by mouse wheel button? In AWT TextArea everything is OK. Thanks.
import javax.swing.*;
class New {
     JFrame frame = new JFrame("MouseWheel");
     JTextPane txt = new JTextPane();
     public Tockic(){
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.setSize(100,300);
          txt.setText("AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best AWT is the best");
          JScrollPane scroll = new JScrollPane(txt);
          frame.getContentPane().add(scroll);
          frame.setVisible(true);
     public static void main(String[] args){
          new New();
import java.awt.*;
import java.awt.event.*;
class Old {
     Frame frame = new Frame("MouseWheel");
     TextArea txt = new TextArea();
     ScrollPane s = new ScrollPane(ScrollPane.SCROLLBARS_ALWAYS);
     public Old(){
          frame.setSize(100,100);
          txt.setText("Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad Swing is very bad");
          frame.add(txt);
          frame.setVisible(true);
          frame.addWindowListener(new WindowAdapter(){
               public void windowClosing(WindowEvent e){
                    frame.dispose();
                    System.exit(0);
     public static void main(String[] args){
          new Old();

In all honesty though, even if fixing this kind of bug would create a new one, its not a bug that should be ignored. Its a major one imo (fix this bug and create a new one, I would personally take my chances). I remember after effects had a bug in a recent update, were audio always was set to low quality when you export, which was very annoying, and it wasn't fixed for months! This bug is worse, and happily I read this thread before updating so Im staying away for now, I hope it won't take months to fix this one.
It makes sense and Im really happy to hear a chunk of the AE team is working on optimizing the code.Though I think they should devote more people to that. AE is such an old program that I assume those working with keying or other of the features that have been updated lately, they bought a better plugin for it allready. I would much rather have NO updates for a year if that means the program would become more stable, faster and in the future they would not need to patch up layers and layers of old code, as you say....and from what I remember the response from the community was pretty much the same from every single one when it was asked in public what people wanted in the future updates....a faster program. THe content of AE is all ready great, and you can get plugins for pretty much everything you need...except optimization and an up to date software that uses the computer to the maximum potential.

Trouble with mouse not moving

Hello folks,
So I'm having some issues with my mouse. I have a Satellite C55-A5245 with windows 7. Problem is, it won't move when I'm typing or holding a key down. I need to be able to move the mouse while using the keyboard to play any of the games I have. Please help!
Thanks

Sorry but I'm not seeing anything like that either :/ I've been through all the tabs and menus and don't see anything like "disable touchpad while typing"
Attachments:
MouseProperties1.png ‏402 KB
MouseProperties2.png ‏283 KB
MouseProperties3.png ‏333 KB
MouseProperties4.png ‏357 KB

I trouble with mouse.

I am using microsoft word 2003. When drag mouse in page word and left-click mouse, pointer no responses. I reinstall microsoft word and driver of mouse but do not. Please help me fix this problem.

what os are you using? XP or Vista?
Also, what mouse are you using?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

ListBox/Xcontrol with mouse click but no dragging

Bonjour,
Je suis actuellement en train de paufiner mon IHM et j'aimerais résoudre un petit problème concernant ma listbox. Cette listbox est contenue dans un Xcontrol mais c'est un détail.
Ce que j'aimerais effectuer c'est de pouvoir selectionner les élements de ma listbox avec la souris mais ne pas permettre de dérouller la scrollbar lorsque je glisse ma souris vers le bas ou vers le haut.
Est ce que je peux faire celà avec un noeud de propriété (solution facilitée) ou bien suis je obligé de coder la fonctionnalité ?
Si vous voulez un petit exemple, voilà ci dessous ce que je peux vous proposer.
Oops, it's in the wrong community forum.
So, I can try to explain that in english.
Hello,
I'm trying to create a listbox where I can select my item by clicking on it but I don't want to select an item, dragging down et seeing my scrollbar going down.
Is there a property node to do that or am I obbliged to developp this fonctionnality ?
Thank you.
Note : I don't want to disable it because I'll not be able to select an item by clicking on it.
Attachments:
Exemple defillement.vi ‏9 KB

Sorry just got home from very long drive and tired . My question doesn't make sense. Restarted computer upon returning home . Prior to leaving house did lose power due to ice storm and wonder if that did something.
Anyway, it's not the mouse that's not working it's the wireless keyboard. I can't get into my computer because I cannot even type my password. No icons are available to me to click on to open computer or check computer. No apple icon for example. Only thing is top right of screen showing WiFi on full bars and the time. The little green light in wireless keyboard flashes intermittently. I have tried shutting down computer, unplugging etc. Nothing is working. Really need computer tomorrow. Time sensitive work to do. Thinking I might have to take a trip to the Apple store in morning?
Using my phone right now to type this.

Trouble with mouse click

Similar Messages

Maybe you are looking for