Trouble With mouting network share

We got this problem on 3 mac who are in 10.3.9
When the user mount a network share, ok no problems.
When he want to mount a second share the first one disconnect.
the alias on the desktop dissapear, but the one on the left panel of the finder stay, and it's impossible to remount it because, the share stay on /Volumes/
i tried to remove it => impossible sill reboot.
i got another problem on these machines with mounting network sharing.
When i select a share on the dropdown list, it mount the one who's before.
i did a onyx, diskwarrior repair permission etc ...., other ideas ?
Thank you

No idea ?

Similar Messages

IPad2 got a terrible trouble with 3G network after updateing to IOS5.1.1

Hello guys, I got a terrible trouble with 3G network after updateing to IOS 5.1.1. Now when I turn on my cellular data, the iPad 2 can say the carrier and 3G on the left top. But when I tap the Safari, it turns to be:"PDP authentication failure". I did the update to 5.1.1 last night, before that every thing is fine, and now I can't use my 3G at all.
Could anyone please tell me what's happing and what should I do???
Thank you so much!

Hi Miky. After upgrading to ios 5.1 I had the same problem.
I reset the APN on network settings and rewriting the same. iPad now working on 3G.
My operator is 3 ITA
iPad 1 64 GB Wi-Fi + 3G

Time Machine Can Be Made to work with a Network Share

FYI I am just posting this here for the benefit of the community. The source of this info is: http://forums.macrumors.com/showthread.php?t=375047
As I write this, I am doing a Time Machine backup to a ReadyNAS NV+ afp mounted share. Here is a summary of what the thread above says you need to do. It worked for me.
Take any supported USB standalone drive and plug it in to an available USB port.
Use Disk Utility to format the drive (or partition on the drive) and name that partition to whatever you want your network share to be called. In my case, I called it "office-tm".
After you do this, open the Time Machine preference panel and select that new drive (in my case "office-tm") to be the Time Machine backup drive.
After Time Machine sets up the drive, it will start counting down before the next backup. Press the little X on the right side to cancel the backup.
Now open a terminal session and change directories to /Volumes/<drive> where in my case <drive> was office-tm (cd /Volumes/office-tm).
When you do a ls -a -l, you will see two important files. One starts with a period (.) and contains numbers after it. The other one is called .com.apple.timemachine.supported.
What you need to do is copy these two files to your network share. The trick is that you want your network share to have the same name as this drive you just prepared (again, in my case it was called office-tm). I first created a new share on my ReadyNAS+ called office-tm and set the quotas properly.
Then you need to copy the files. There are several ways to do this but the way I did it was that I temporarily mounted the network share at a different mount point in terminal just to get the files over. So for example, I did:
sudo mount -t afp afp://<ip.addr.of.share>/office-tm /Volumes/office-tm2
Then I copied the two files over (substitute your appropriate volume names):
cp /Volumes/office-tm/.00whateveryourfilenameis /Volumes/office-tm2/.
cp /Volumes/office-tm/.com.apple.timemachine.supported /Volumes/office-tm2/.
Turn off Time Machine so you can unmount.
Now you can unmount both the USB drive and the network share and then you remount the network share as the proper name. The same one that the USB drive was named so as far as Time Machine is concerned, the volume is still there. The two files are on the network share so all is fine and Time Machine can find the volume it expects.
Wait for Time Machine to start it's hourly backup and away you go.
PLEASE NOTE THIS DISCLAIMER - There is probably a good reason why Apple disabled this feature so you might want to think carefully before you rely on this hack published in the MacRumors forum to back up your Mac. I am using this for testing purposes only and I am still using traditional backup techniques for my "real" backup of my office machine. If you don't get good Time Machine backups and you have relied upon them for critical data, don't blame anyone but yourself.

Name: RAIDiator
Version: 3.01c1-p6
Date: Tue Dec 12 17:46:22 2006
Size: 46566912 bytes
Reason: Final 6.
We should probably start a new topic in networking on this. I am seeing some strangeness with afp shares as well.
I have most shares set up to allow access by both CIFS/SMB and AFP. If I use Sidebar and try to access the shares by AFP, it says it can't connect to the server. But the same shares via CIFS works fine. (I can click on the "Windows" server icon and connect.) But for any of these shares, I can manually connect with the normal Go > Connect to Server... method, specifying afp://<ip address> and that works fine.
In the case of the Time Machine share that is the subject of this post, I disabled CIFS and am only using AFP because I wanted to make sure I connected to the share only via AFP for Time Machine purposes.
BTW, I do not use USER or DOMAIN security mode in my case and my shares are set up as SHARE security mode.

WLAN trouble with PEAP network!

I'm trying to connect to Purdue University Calumet's PEAP Network and I am receiving the Authentication Failed error.
Anybody good with that stuff?
And you can tell me where i'm messing up??
The People incharge of setting up WLAN don't know anything about Symbian Phones, Just they idiots pretty much.
All they knew was Windows Mobile Set up.
Data Bearer: Wlan
Network status: Public
Network Mode: Infrastructure
Security mode: WPA/WPA2
Security Settings:
WPA/WPA2: EAP
WPA2 Only Mode: Off
EAP Plug In Settings:
1. EAP-PEAP
EAP-PEAP:
Personal Certificate: Not Defined
Authority Certificate: School Uses [Thawte Premium Servers].
Username in use: User Defined
Username: [username]
Realm in use: User Defined
Realm: blank, school doesnt have one.
Allow PEAPv0: YES OR NO??????????????????????
Allow PEAPv1: YES OR NO?????????????????????
Allow PEAPv2: YES OR NO?????????????????????????

Hi,
did you get it working all right?
My understanding is that it shouldn't matter if you have more of them enabled in the phone. As long as the one which the server wants to use is configured properly, things should work out.
Did some quick browsing, you can check more info from here: Extensible Authentication Protocols
2110i | 3110 | 6110 | 6210i | 9210i | N95

Having trouble with social networks and connection issues

My iPad won't load any pictures on facebooks website, or the app. It will load google pictures but on Facebook they come up as a blue question mark and it also won't let me log into intagram or snapchat, it says check your network connection. Also my app store won't load. Is there anyway to fix this? I restarted my iPad multiple times and cleared all cookies and data but it didn't help. I had a provisioning profile from an GBA emulator awhile back and I deleted the emulator but not the profile. I recently tried to download the emulator again and this is when problems started. I deleted the profile but nothing seems to work. I have an IPad 2, is there anyway to fix this without going to Apple? I'm not good with all this tech stuff

Your post indicates you have used Cydia, which is a software application for iOS that enables a user to find and install software packages on jailbroken iOS Apple devices. Since your iPad has been jailbroken, we can't help you in this forum. Best bet is to Google for answers.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
http://support.apple.com/kb/HT3743
If you jailbreak your iPad:
1. Your Apple warranty, if any is remaining, is canceled.
2. We can't help you in these forums.
3. Apple Support and the Genius Bar won't help you.
4. You can get a virus and malware.
5. You may "brick your iPad and have an $$$ paperweight.
What is Jailbreaking iOS? Should I do it?
http://tinyurl.com/mn5umca
 Cheers, Tom

Trouble with e1000g0 network driver in Virtualbox

Hi,
Has anybody resolved this issue? Cant get networking working on the newest solaris 10 platform because I think the driver or device is faulty or nonexistant. Tried full installation and it doesnt work. Dladm says this is the device. Ive got a ipv4 address up and running but no ping or dns resolving. Anyway, cheers.

There some debate about the duplex and speed settings cause its a gigabit ethernet virtual network card. There's a ndd command that supposed to help you set it to 100 and/or half-duplex. Had no success with it, looking now for a old cheap pc for testing purposes. But the device is in /dev and the ndd page said its included e1000g0 but its gives me an error. Maybe you'll have better luck with it. I'll look into more tomorrow if I have time at work.
Cheers,
Siggi from Iceland.

HP Deskjet 3520 e-All in one printer trouble with scanning network, connection and very slow print

Dear all
I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem.
I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same).
Obesely something did go wrong, but i can’t find the problem.
Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all.
I hope that someone recognize this problem and can help me to solve it.
Regards,
Esra

Hello chesterpascual,
Welcome to the HP Support Forums!
Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
Click here to locate the contact information.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

OS X 10.6.4 troubles with SMB networking

Hello, I found, in my iMac, when for some reason the mounted SMB shares are no available for some time (i.e. the server providing them, rebooting), then available again (server completed reboot and shares up), I cannot navigate the mounted shares, and if I try to reboot iMac, this hangs, so I have to forcefully power down iMac. Shares are provided by a windows server.
Any hints about this?
TIA

Related to this thread http://discussions.apple.com/thread.jspa?messageID=11603932
Not that we have any answers ;(

Trouble with detect network "Domain network" in the domain member server

HI a have quetstaion about detecking "domain network " in the windows 2012 r2 server . after instaling and adding this member server to domain i look that i cannot connect to this server . After I connect to console a detect site also public site
. After I disable and enable this netwotk site the network is correct domain. How is detect which network is it ? this contacted domain controller ? etc. ???
Thank you for answer
Falcon

Hi
Not fully understood the problem. But if you have a Windows domain and you can't add the new server to the domain or can't connect
to the server after or before joining to the domain. Then it could be no of reason first one to check is firewall.
Turn the firewall on host and source and then try again. Also are you able to ping the new server?
How are you trying to connect to the server via RDP?
If yes then you need to enable the RDP and give yourself permission to remote dial in.
Thanks
Umar

Trouble with viewing family share invite on email??

I am the family share manager and i sent out 2 invites to family members. they were not able to open the invite on the email. Has anyone ran into this problem???

A bit different, I've been sending and resending the invitations under Family Sharing but none of my kids nor wife have yet to receive a single invitation yet to attempt and open and accept ?? Had zero issues updating to Yosemite and IOS 8 across all my devices but family sharing I am spinning my wheels going nowhere. Docs said they can accept actual email or by invite showing up in family sharing under iCloud in System Preferences. Try the other...
d-

Synchronizing with network share?

Is there a way to synchronize local workspace files in CFBuilder with a network share? I see the FTP options but these won't work for me as I just need to push the files over to a shared drive on our development server (Like you can do in Dreamweaver).

As CFB is just built on Eclipse, there are probably many plugins you can get that'd do this - I just found one called FileSync which should do the job you're after, but have a Google and see what suits you.
Never used any of them myself (disclaimer, etc) but it's a fairly simple task so I'm sure someone has written something decent.
O.

How can I make OSX index a network share for spotlight?

How can I make OSX index a network share for spotlight?
I am using a QNAP NAS with SMB network shares, which I mount with OS X Mavericks. They are not searchable, as far as I know because of the indexing of network share is by default not activated.
To force the OS to index them I activated this via mdutils. But this is no solutions. This makes spotlight to index the share once. But I want spotlight to index it always and keep it up to date. I have a huge amount of documents & fotographs, which is very difficult to manage without being searchable.
Unfortunately the only solution I found in the www was the mdutils-way, which seems not to work, maybe only works not for me.
I would appreciate any assistance,
Thank you,
Stefan

My thanks to everyone who has contributed to solving this problem here.
It appears that there still is NOT a good, reliable solution. Please correct me if I'm wrong.
I did find this on http://jonathansblog.co.uk/how-to-enable-spotlight-indexing-on-a-network-drive:
===================================
To enable spotlight indexing on a network drive:
# mdutil /Volumes/name -i on
To disable the indexing of a connected network drive:
# mdutil /Volumes/name -i off
To check the status of indexing on a connected network drive:
# mdutil /Volumes/name -s
===================================
And, I found this on the Synology NAS forums:
cd /Volumes
mdutil shareName -i on
mdimport -Vp ./shareName
where shareName = name of your share
I have used the mdutil /Volumes/name -i on, and it seems to work.
But, if I understand it correctly, it is a one-time indexing -- the index is NOT keep up-to-date with changes.
So, how can we keep the index up-to-date?
My thought was to schedule a Terminal file to execute each night with the mdutil code.
Would this work? If so, how would you setup a scheduled run?
Would it have to be done on each Mac that accesses the Share?

Net Use give error 67 when trying to mount network share in Windows PE

I am trying to deploy Windows 7 Pro by PXE booting Windows PE5 and applying a WIM file over a network share. The problem that I am running into is that I get an system error 67. I can ping the server with the network share with both the IP
and the FQDN, but whether I use the machine name OR the IP I get a system error 67. I verified that the account that I am using to connect has permissions, but even excluding the user name and waiting for it to prompt me for a user name gives the same
error. Any idea what is going on?

Check : http://social.technet.microsoft.com/Forums/en-US/9c429bef-edf0-4bad-83a3-644e6ba28ea8/net-use-system-error-67?forum=winservergen
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Windows 8.1 Network Share 0x8007003b Error Copying Files

Hi All,
I'm having an issue when copying files from a Windows network share. If the file is above 5MB it will start copying and then after a minute or two I will get an error such as:
Interrupted Action
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
Error 0x8007003B: An unexpected network error occurred.
The network share is in a different office and is accessible over a point-to-point VPN, so the connection is not that fast.
But before everyone tells me to start diagnosing the router and or VPN please take note of the following:
My colleague who is running Windows 7 can copy files from the network share fine
If I run a Windows 7 VM on my Windows 8.1 laptop I can copy the files across fine
I also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client
VMs to a similar speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
There is also a noticeable difference visually when copying using Windows 8.1 and Windows 7:
Windows 7 - The progress bar progresses smoothly giving the current speed and estimated time remaining
Windows 8.1 - The progress bar progresses in a jumpy fashion. E.g. it shows no progress, then after a minute it jumps and shows 16% progress, then shows no further progress, then jumps by another 18%. There is no estimated time remaining.
I ran Wireshark to investigate what was going on at the network layer. I see the following behaviour:
Windows 8.1 - The file is copying fine then all of a sudden there are a lot of TCP dupack packets. After which the Windows 8.1 client sends a RST packet and then the error pops up.
Windows 7 - The file is copying fine then you also see a load of TCP dupack packets, however no error is displayed and it continues copying fine.
I'd appreciate any help with this I'm hoping there are some settings I can change to make Windows 8.1 behave more like Windows 7!
FYI originally posed here (but was advised to ask on Technet) - https://answers.microsoft.com/en-us/windows/forum/windows8_1-files/windows-81-network-share-0x8007003b-error-copying/300bc9a4-597b-402a-b885-9dd6f6fb51a2
Thanks,
Zak

Hi MeipoXu,
Sorry, it has taken me so long to reply. I thought I had subscribed to receive updates on this thread, but I didn't see anything!
I've ran the commands you gave but some of them did not work, I got the following error:
Set global command failed on IPv4 The parameter is incorrect.
However, output of current settings are below.
TCP Global Parameters
Receive-Side Scaling State : disabled
Chimney Offload State : disabled
NetDMA State : disabled
Direct Cache Access (DCA) : disabled
Receive Window Auto-Tuning Level : normal
Add-On Congestion Control Provider : none
ECN Capability : disabled
RFC 1323 Timestamps : disabled
Initial RTO : 3000
Receive Segment Coalescing State : disabled
Non Sack Rtt Resiliency : disabled
Max SYN Retransmissions : 2
To answer your original questions.
Do you mean the file below 5 MB will copy fine ?
5MB is not a hard limit. If the file is small enough it will copy before it errors out. A file of around 5MB or so fails with an error.
Have you tried to copy the files from another Windows 8.1 machine (This will help us to verify whether the issue is casued by the specific machine)?Have you tried to copy another file from the network share to have a check ?
Yes I've tried from another Windows 8.1 machine and have the same behaviour. It is the same with different files from the network share. And the same with different network shares.
I am seeing nothing in the event viewer when the error occurs. I do not believe this to be a VPN issue because I can recreate this situation perfectly. As I mentioned in the original post- I
also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client VMs to a similar
speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
Basically, I had virtual machines all on the same local network. One virtual machine was hosting a file share with files on it. I created one Windows 7 VM and one Windows 8.1 VM. Using VMWare Workstation you can limit the network bandwidth to the VMs. When
I did not limit the network bandwidth I could copy all files of all sizes fine. However, when I limit the network bandwidth to a speed of around 30-50KBps, the Windows 8.1 VM fails to copy files with the same error. But Windows 7 VM copies the files fine.
The point of limiting the bandwidth in this way is to create a similar scenario to that I see when connecting over the VPN.
This all leads me to believe there is some sort of issue with copying files from fileshares over slow connections using Windows 8.1.
Cheers,
Zak

Export-VM to a network share permission problems

Hello,
I am just getting into scripting backups of Hyper-V VMs using Powershell. I have using 2008 R for the Hyper-V host and 2008 R2 for the server with the network share. I am using Powershell Management Library. I have been able to export the VMs up to the local
VM host. However, I have not been successful in exporting to a network share. I get the stock message:
"Failed to create export directory with error 'General access denied error'(0x80070005): MyVMtoExport (98504EFC-2B8A-43A8-A14D-999B78CFB736)
Failed to create export directory."
I have read about and applied NTFS and share permissions on the folder on the network share. I have given full control to my domain account, the domain Admin account, as well as the machine account of the Hyper-V host.
I have been able to (as the same user), xcopy files from the Hyper-V host to the share. I have also been able to export the VM from Hyper-V manager to the share.
I have gone back an forth checking permissions, but can't seem to export the VM as myself or as the Hyper-V host machine account.

Hi ,
I assume that the logged user can manager hyper-v and it has proper share/ntfs permission on share folder (also the computer account ).
Please run powershell.exe directly on hyper-v host do not "run as administrator" then export the VM .
BTW , here is a script for exporting .
http://blogs.msdn.com/b/virtual_pc_guy/archive/2012/02/08/powershell-script-for-exporting-a-virtual-machine.aspx
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Trouble With mouting network share

Similar Messages

Maybe you are looking for