Trouble with multi-media docking station

I have used my multi-media docking station every night since I got the phone in September. Last night I put my phone in and went to sleep only to wake up at 5 and realize that its not charging.
I took the phone off and put it back on and it still won't charge. After several tries I got up and got my usb charger and my phone charges fine on it.
Any ideas??
Thanks

Sparkette wrote:
I have used my multi-media docking station every night since I got the phone in September. Last night I put my phone in and went to sleep only to wake up at 5 and realize that its not charging.
I took the phone off and put it back on and it still won't charge. After several tries I got up and got my usb charger and my phone charges fine on it.
Any ideas??
Thanks
Did you try taking the plug out of the back of the docking station and then reinserting it. Maybe it was knocked loose.

Similar Messages

  • USB media docking station won't wake up pc

    using the USB media docking station with Toshiba Satellite laptop. If it goes into sleep mode for more than an hour, I need to open the laptop lid in order to wake up the PC. With my old HP laptop, I could simply move my external mouse or press any key on my external keyboard to wake it up

    it could be that the speakers that is having the issue. Does your coworker's laptop work with the speakers when plugged directly into the laptop?
    I have encountered this problem before, when the cable was actually leaking current back through the cable that connects to the headphone port (3.5 mm jack).
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • TS2634 After I updated my iPod touch with iOS6, it does not work with my Logitech docking station. Is this a problem with iOS6?

    Does updating the 4th generation iPod touch with iOS6 keep it from working with a Logitech docking station/boombox? Nothing is wrong with the boombox.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    If it still does not work that means that the update broke compatibility. That happens sometimes. You will have to wait for an update to either iPod's iOS or the dock's firmware.

  • Xb4 Notebook Media Docking Station Compatibility?

    I am in the market for a new laptop. I bought and have loved using the HP xb4 Notebook Media Docking Station. I would like to buy a new HP laptop that will allow me to continue using the docking station.
    What new HP laptops are compatible with the HP xb4 Notebook Media Docking Station?

    Hi,
    The good news is, it compatible with all laptops which have USB 2.0 ports (you can use USB 3.0 port but won't get USB 3.0 speed):
         http://h10032.www1.hp.com/ctg/Manual/c01576968.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls

    any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !

    Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.

  • Does the new IPOD Nano connect with the bose docking stations?

    Does the new IPOD NANO connect with the Bose docking stations?

    hi
    Yes it does. just bought a Bose. But make sure you have no cover on your Nano as it will not connect!

  • HT1222 Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

    Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

    Natan turbo hadar,
    I have the same exact problem.
    I put an iPod shuffle on the Bose system, it plays just fine.
    My iPhone 4s works just fine connected to my car stereo.
    My iPhone 4s on the Bose will charge, it "thinks" it's playing, song shows, time line shows it's playing, can pause if I touch the phone's screen.
    The remote for the Bose WILL NOT pause it, forward to next song, etc. It does work with the iPod shuffle.
    So it's not the Bose, it's not connections, it's the iOS 7.1.1
    Everything worked fine before, any one else have suggestions?

  • IPhone 4 won't work with any music docking station. I have tried it on a Bose system and orbit. This has only happened since the last 2 iOS update. Appreciate any help .

    iPhone 4 won't work with any music docking station. I have tried it on a Bose system and orbit. This has only happened since the last 2 iOS update. Appreciate any help .

    you have two kickers in there.
    Cheers
    Pete

  • Syncing Classic with USB killed docking station for my Nano

    I have two libraries in Itunes, one for music and one for books. I use my Nano for music. After I organized a second library for books, I bought a Classic. It uses a USB cable. After my first hookup of the Classic, syncing the book library. The firewire docking station for my Nano no longer will connect that Ipod to Itunes. I can charge, but not sync. Is this a new feature from Apple or does Itune now only recognize Ipod thru the USB port? I can sync the Nano with USB, but I like the docking station

    I do not think that your USB docking station is faulty. I use it all the time.
    What killed my ipods (resulting in exactly your problem) was the update to firmware 1.1.2. I am on my fifth !! ipod classic (courtesy of technical support/ genius bar at the apple store) as they are not as solid as the older models and
    may go wrong quicker, despite much more enhanced functions. Touch wood mine is working fine now.
    In the mean time, you could try a hard/factory reset of your ipod:
    apple doc: http://support.apple.com/kb/HT1339
    Interesting may also be "hidden" ipod commands:
    http://www.command-tab.com/2006/03/30/hidden-ipod-commands/
    Hope you can sort it.

  • Problem with laptop and docking station

    Hello.
    We have two laptops with two docking station. Both laptops w/ docking have the same problem:
    When the computer is turned off, and its still connected to the docking station, the fan in the computer start to run really fast. The fan goes on for a good while. This is making alot of noise, which can be annoying for the person using the office. When the computer is on, the fan runs at normal speed. If you disconnect the computer from the docking station, the fan stops immediately. Any ideas?
    1. Product Name and Number
    HP ProBook 6460b
    Docking Station VB043AA
    2. Operating System installed
    Windows XP 32-bit
    3. Error message
    No error message.
    4. Any changes made to your system before the issue occurred
    No recent changes.
    Thanks in advance.
    - Betroger
    This question was solved.
    View Solution.

    It is possible the notebook is not completing the shutdown in full when docked.
    Make sure the BIOS is the most recent version.
    Here is the most recent one to try should you need it.
    Other than that, I am afraid I do not have much else for this. I did some research, but I didn't really find anything that was exactly like this. I found scenarios where the fan would run at full speed when docked, but this happened whether the notebook was booted or not. You can try your luck in the business support forums to see if they may have something that is a little more helpful.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • DVI/HDMI connection for Thinkpad R61 (with IBM 2504 Docking station) and Samsung LNT4665F LCD TV

    I am trying to connect my laptop (Thinkpad R61) with my TV (Samsung LNT4665F) using a DVI/HDMI cable. Because the R61 doesn't have a DVI port, I am using it in the IBM 2504 Docking station. I have docked the computer, connected the DVI/HDMI cord (using HDMI in 1 on the TV, which I believe is the only DVI accepted HDMI on the TV). I followed the Samsung instructions to then hit "Fn-F7" on the laptop. Unfortunately, nothing is happening. It doesn't appear that any signal is pushing out to the TV.
    I am not very tech savvy. Can someone please tell me what I need to do?
    Thanks for your help.
    Brian

    lead_org wrote:
    if your R61 uses an intel GPU, then it won't support the dvi passthrough port on the dock. 
    The 14" models with intel GMA have DVI pass through.
    @ bweisy, welcome to the forum,
    Which model R61 do you have? Could post the Type and Model Number Please do NOT post your s/n.
    Thanks
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Iphone 5 doesn't work with philips DS9000 dock station

    The dock station Philips DS9000 doesn't work with the Iphone 5. I have tried several lightening adaptator but the problem is the same. Anyone have the same ??

    I have the SoundDock 10 and generally use the Bluetooth connection.
    I have just reinserted the 30 pin normal socket ( as in normal SoundDock)
    the Apple 30 pin to lightning adapter and with iPhone 5 have perfect
    sound
    It works so something in your set up is faulty possibly the adapter
    some have posted issues

  • Not Getting "Undock" Option in Windows 7 with W520 in Docking Station

    I just bought a W520 which is my 5th ThinkPad in about 10 years.  This one is different in that I don't get the option to "Undock" in the Windows 7 "Shutdown" option list.  I also noticed the W520 doesn't seat as securely into the docking station as my prior ThinkPads, but the docking station ports all work correctly.
    Is there something wrong with my hardware or Windows 7 settings?

    Hi all
    I guess, this article would help
    http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/94468d2b-4ae8-4228-90a6-2c5ae...
    If the undock option is not available, you could just put your laptop into sleep mode (or simply close the lid by default) and just undock the docking station from it. Resuming from sleep mode does not take much time either.
    Have a nice day! 
    Peter
    W520 (4284-A99)
    Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future 
    =====================================
    Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
    http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62... 

  • Trouble with Extreme N base station and Express station wireless

    Upgraded extreme base station with new extreme "N" base station. Currently have the extreme "N" base station connected to cable modem on 2nd floor. I have wired the house to have the demarc on the 2nd floor. I purchased the express base station to be placed on 1st floor to extend the wireless range from the extreme "N" base station.
    Prior to this setup, I had a wired bridge on the 1st floor to the main router on the 2nd floor. I was able to connect all wireless connections to the bridge where there was weak signal to the main router on 2nd floor.
    The trouble I am having is that whether I have the express base connected or not. My signal is near the same as having only the main base station on 2nd floor. I can be seated right next to the express on the 1st floor and have only 1-2 bars on the signal.
    I have updated and running the latest utilities for the airports. I have also been seeing the same trouble with other Mac's and PC's.
    Also, I have been noticing the extreme "N" base station blinking amber when no Mac's or PC's are accessing the network or even when they are.
    So, even when both the extreme and express have solid green LED, I still have the problem.
    I am not sure if I am setting up this incorrectly or if I have hit a brickwall with this setup in my house.
    Could I hard wire the express from the extreme from the second floor as I did with the bridge I use to have? I am not sure if the express would work as a wired bridge.
    Just appears to be performing less then my prior PC networking products.
    Thanks everyone...hope to get some insight. I have read all the prior discussions and still not getting good results.

    Tesserax....Thanks for the quick clarification on using the expresss as a wired bridge. I did avert back to a wired bridge now using all apple products. I was trying to get away with reusing the hard wire from the base station since I was running out of ports on the base station. {Apple has to be difficult with only having 3 ethernet ports.}
    So I had to run a linksys switch off the extreme "N" base station.
    Thanks again..
    Guess I have to live with the quirks...

  • Iphone 4-iOS 7.0.4 doesn't work with Philips DS1150 Docking Station

    Hi all,
    as said, I have an ipod touch 2nd generation and an iphone 4 already updated to iOS7.0.4
    4 days ago I bought a docking station Philips DS1150 and while the ipod touch works perfectly, my iphone cames out with a popup message saying that the device is non supported.
    I'm a quite confused about that, I bought that Philips because I tried it 6 months ago in an hotel room and it was simply amazing. I guess the iOS7 update messed up a little...
    I've also run the reset instruction for both the dock and the iphone, I've also lost half day formatting the whole iphone as a fresh-form-factory and the message is always the same.
    Any kind of help would be appreciated.
    Thanks,

    I have the same problem and have since the 5.0 update.  The 5.0.1 didn't fix it nor did the itunes updates including the most recent.  Apple doesn's seem to care either as I am finding is the case with any bug they don't feel like fixing.  Sorry, so far no solution either.  I have erased erased everything and started over numerous times, still doesn't work.

Maybe you are looking for

  • Memory leak in MAX Preview resolved by build 411

    I was experiencing a memory leak while using the TLF that came as part of Flex 4 MAX Preview. Over the course of several hours, instances of a class called TextAccImpl would rapidly accumulate to the point where they accounted for over 50% of memory

  • Finding the ReportRepositoryPath and Report Filename

    I was wondering if the report repository path and report filename of files sent to the report manager are stored somewhere in a table. It seems as if a select statement would be easier than finding the psreports/dbname/data/process id/process name_pr

  • To add data in excel file

    I have an excel file with some cells blank. I want to add data in these cells and save this excel file with a different name.How can I do these by repoer generation toolkit for microsoft office.I am using Labview 2011. Please give suggestions. Thank

  • Security Error in Log for 11g WLP

    I have a new 11G WLP domain that has one set of clustered managed portal servers on it and several non-portal managed servers. The non-portal clustered managed servers start fine and deploy their apps fine. The portal managed servers do not start at

  • Why this happen?

    i have an application that doesn't update on the fly(update an internalframe), why is that happen? the window that you see is the Jinternalframe that i add Jpanel on its. my code is to complex so i explane with pictures. this the step: 1. this is the