Trouble with my i-tunes card...
I'm having trouble with my itunes card, every time I try to enter the code it doesn't let me....
Go here and read under "iTunes says my code is "invalid" http://www.apple.com/support/itunes/store/giftcard/
Similar Messages
-
Ok, I am actually having troubles with my itunes music card. I accidentally scratched off a letter. how can i get my card to work without the actual code? thank you.
Yu can try contacting iTunes. See the iTunes Cards abd Code topic of:
Apple - Support - iTunes -
My daughter added songs with her I tunes card and my credit card was charged, how do I get it off my credit card?
What process did your daughter use, there is a specific format to redeem an iTunes gift card. The gift card must be redeemed using the Redeem link in the Quick Links on the right side of the iTunes Store in iTunes on a computer or the Redeem button at the bottom of both the iTunes and App Store apps in iOS. Redeeming the gift card then applies the value of the card as an available credit to the user's iTunes account. The credit is used first before any bank card also stored in the account. If the purchases use the entire credit and there is an additional balance due, it will be charged to any bank card stored in the account.
-
More pgms working with MSI TV-tuner card(s)
There is a couple more programs I found that work fairly nice with the older MSI TV-tuner card and the newer Master TV-tuner card. They are: Intervideo WINDVD Creator and Intervideo Home Theater. Both have free 30 trial dowloads at http://www.intervideo.com. If I use these two softwares and Ulead Video Studio 7, I can pretty much accomplish every thing I could ever ask for with my MSI TV-tuner card. I just wish all the features were consolidated into one software.
Sure, here is my hardware specs:
CPU #1
Asus a7n8x 2.5GHZ with 512MG 400HZ mem
MSI TV-tuner (master)
Windows XP
CPU #2
Asus a7v 1.4GHZ with 650MG mem
MSI TV-tuner (older)
Windows XP
Note: I don't use the tuner and scheduler since I use S-video inputs from my Timewarner Pioneer HTDV setbox. I did, for fun hook up a coax to my MSI TV-tuner card and scanned for ports using these newer softwares from Intervideo, but they did not correctly scan the digital and HDTV channels and only scanned the old analog channels. I tried for fun to schedule some analog channels for record, but it did not work properly for me. This is not a big deal to me since, the tuner and scheduler is not something that interest me, like most folks. And since, I don't use the tuner and scheduler features, I immediately de-installed MSIPVS from both systems since the Intervideo products, especially the WINDVD creator does a much finer job then the old MSIPVS software that MSI keeps bundling with their TV-tuner card. Also, I thought it was cool that the Intervideo WINDVD product allows a person to create huge jpg/gif/bmp slide shows on a DVD without the limitations (total 1900 or something close to this) on VCD's. But, you have to create them using the mpeg2 format, by cliicking on the icon toward bottom and then using the author to create the vobs, etc from the mpeg2's. Anyways, all other softwares, I have tried for this crapped out big time. Sorry, I can't help the tuner/remote probs, but I think conio and some others have a better handle on it then me. -
I'm having trouble with the guitar tuner in Garageband!
I'm having trouble with the guitar tuner in the new Garageband ..locked on C, no response! I've read that opening and locking a couple of times will unfreeze it but that's not working for me. Any suggestions?
Reset your preferences file: Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
Report back if that doesn't work. -
Hi,
I dowloaded some songs, and I meant to pay with an I Tunes card (code)
but my credit card on file was automatically charged.
How can I reverse the charge?
Thanks.Click here and ask the iTunes Store staff for assistance.
(107256) -
I am having trouble with my iTunes Gift card code. It says I have not entered the code correctly when I have…repeatedly. How can I redeem my iTunes voucher?
If the card was issued in the same country as you and your account are based and the page that you posted from doesn't help, then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
No sound with MEGA TV Tuner card
I have a Mega TV Tuner card. I installed it succesfully in my pc and it worked ok appart from there being no sound. I conected the internal cable to the auxillary imput on my motherboard (built in sound) but all i got was a bad sound . When I opened up the sound card controls I could see the auxillary volume control move when I varied the volume within MSI PVS and this varied the volume of the bad sound. Picture quality is perfect. Thinking it may be something to do with the built in sound I tried a sound card and conected the internal line out cable to it, but the problem remained. I have just tried out exactly the same on another pc and the problem is just the same. Do you thing this is a problem with the card as all signs indicate this? Or am I missing something very basic.
RichardNeither of the pcs were MEGA They were both ASUS ones, but as I said the problem was identical in each.One of them had a full installation of WinXP Pro and all of my programs, but the other had just had Win xp home installed on it today and nothing else, so it could not be any conflict with other programs that was causing the problem. Is it possible to download new drivers for the card? or should I scrap it?
-
Weird troubles with system resolution [ati card]
Hi all !
First post here because I'm coming from the french arch community
Straight to the point: I have a new toshiba laptop with ati hd 3650 graphic card running with proprietary drivers. Everything worked fine (Direct rendering ok) until I decided to configure dual screen with aticonfig.
I tried but it didn't work as expected so I decided to go back to my previous Xorg conf. But now I have a kind of weird behaviour. When X starts, it seems to settle as if it was still running dual screen configuration. My mouse cursor is on the right side (desktop center) and when I log on, kde shows wide desktops. Weirder is the fact that when I go to system configuration > display settings, the screen flicks and then everything went back with no wide desktop anymore... Another thing is when I've just logged on, blender run just fine, but once I've been to display settings, it shows horizontal black lines all around and is unusable though.
One more detail: on the display settings, I still can see the 2560x800 resolution setting on top of the list... I suspect kdm to use this one but how ? I don't have any idea
Here is my Xorg.conf
# Core keyboard's InputDevice section
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "record"
Load "dri"
Load "glx"
Load "GLcore"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "DesktopSetup" "single"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
If anyone has any clue on what is happening to my mad X server, I'll be very gratefull
Oh and sorry for my bad english
Last edited by sebby (2008-11-04 20:37:05)Nobody ?
-
Trouble with eSata Drives and Cards
I'm totally at my wits' end on this one. Hope someone has some useful suggestions.
I had an esata card from OWC that came with an external Mercury Elite Pro enclosure. I installed it in 10.4.8 or so. Upgraded to 10.5.1 and then 5.2. Started losing my raid (kept degrading). I separated the drives. They continued to work as indpendents. Then they started disappearing from the desktop. I would reboot and they'd reappear. Disk utility reported no errors on either drive.
Then they just completely disappeared.
I went out and bought an eagle esata/usb enclosure to test my drives. Both pulled drives from the OWC case mounted perfectly through the USB bus but neither would mount through the esata bus on the new eagle enclosure. So at this point it has to be the card or the wires right? Swapped out wires and still no joy. Wrote to OWC who didn't write back and bought a new card from another vendor (Norco). Installed it installed drivers. Shows up in PCI cards as a RAID controller.
Still, no esata drives will mount through it. Not even seen by disk utility. The eagle drive light indicating hard drive activity briefly illuminates during startup, but that's the extent of it.
I reset NVRAM. I ran disk utilities on my startup disk. Repaired permissions. Reset PMU.
I've attempted to install 10.5.2 combo update over my system and I get the error
"You cannot install Mac OS X Update Combined on this volume. This volume does not meet the requirements for this update."
Usually this means my system is updated beyond what I'm trying to update with... but this update was downloaded from apple.com yesterday... even tried it after safe booting to see if it was an extension conflict.
Anyone have any other places to go for help or thoughts on what to try next?
Thanks!Sorry about that, okay the box was torn and there was no software. After a month of problems, spinning beachball etc. I contacted Norco and with the help of an interpreter, very difficult to understand tech support, I found out there was drivers involved. Downloaded the drivers and the card still would not work. Nor would the drives mount ( 2 WD my book studios 500g each.) I have returned the card and am currently running the drives through the 800 fw connection. I brought the drives, 6 gigs of ram and the card all at once, put everything togathr and thought I would be in editing heaven. I quickly fell into tech support ****...Everyone blames everyone else, oh well. I am looking ror a PCI-X controller card that works. I feel the Seritek could be the one. It is not my choice because it does not support ESATA 11. Can you help me?
-
Does anyone know what error code (-1202) means? I can't add any money to my I-tunes store account with an i-tunes card. Please Help! Thanks
Contact the support staff for the stores at http://www.apple.com/emea/support/itunes/contact.html
-
Best Graphics and Tuner Card for 865 Pro with XP MCE (Maybe Vista?)
Hi all,
I'm looking at rebuilding my 865 Pro
I haven't upgraded the graphics so what do people recommend as the best AGP card for the 865 Pro
I have the MSI tuner but I am looking a ditching instant on for MCE would like to get a idea for digital tuning card (I'm in the UK). Would anybody recommend using a combined AGP/Tuner card like the ATI All in Wonder cards or using a USB Tuner?
I am thinking I will have to stick with XP because of driver support. I have dual boot to Vista at the moment but the wifi doesn't work.
Idea and Suggestions welcome
DannyThanks for the reply Stu.
I tried installing the XP wi-fi driver in Vista and I couldn't get it to work. I didn't try harder as the Mega 865 Pro is not supposed to be Vista compatible.
Is there a 3rd party driver I should try?
The reason I would like to upgrade the graphics is to have the option to play some games and I am beginning to find limitation with the on board graphics. I tried to check out second life on the mega the other week and it wouldn't set up because the graphics wasn't up to it.
I have tried installing a dedicated APG card before - the Gigabyte nVidia Geforce 6600 with heatpipe passive cooling.
It is a great card but I found every now and then the PC would crash with it running. It is a very tight fit with the TV tuner card and the airflow wasn't good.
So I am looking at using a small APG card or replacing the tuner. That’s why a combined card seemed to make sense and would free up the PCI slot.
As power is a problem for some graphics cards is upgrading the PSU an option?
Thanks
Danny -
KT4V (with lan) and TV Tuner Cards
I have a MSI motherboard model MS6712. This device isn’t compatible with any PCI TV Tuner Card. When I am using a tv-tuner card, after some minutes the computer crashes and the only way is turning off the computer by switching off the power. This problem happened with four tv cards which I have used. My motherboard has been replaced two times with others MS6712 motherboards. But the problem, which doesn’t happen on a MSI MS6385, is still persistent. Drivers and Bios are up to date.
My motherboard has known incompatibilty with any tv tuner card? I think that this problem affects any MS6712 motherboard.
Anyway the problem is surely caused by the hardware or by a defective BIOS.
My Pc:
Motherboard MS-6712 + lan
Athlon XP 2000+
VGA GeForce 4 MX440 - 64MB SDR - APG 4x
Maxtor Diamond Max 9 Plus - 60GB
DVD Rom LiteOn LTD-163
CD-RW Artec WRR-52x
TV Tuner Maxron (Wayjet) with Conexant BT878A and Philips Tuner
Modem 56k Conexant
Power Supply SUNTEK 250WOr this Power Supply SUNTEK 250W
-
I have trouble with APSDeamon.exe
I also have trouble with starting I Tunes. Can you send a programtool to solve this problem?
Hi Tonnie Blommaart,
If you are having issues with APSDaemon.exe and iTunes not launching, you may find the following article helpful:
Apple Support: iTunes for Windows and the iCloud Control Panel may not launch when APSDaemon (Apple Push) is running
http://support.apple.com/kb/TS4194
Regards,
- Brenden -
Problems w/ TV Tuner Card and Media Center
Hi all,
Just wondering if anyone else is having this problem:
I just installed the FX5200 TDR-128, with the TV@nywhere card, and the Media Center Deluxe II. I can't get the tv stations to work in MCD II. It works great with MSI PVS software that came with the TV Tuner card. When I go into the "Watch TV" menu of MCD II, it brings up the tv screen but it is all garbled or sometimes a blue screen. I changed all the settings to the appropriate formats and it even has the channels that were scanned in the MSIPVS program. Does anyone know what is causing the channels to not work in the Media Center Deluxe II? Also there is a switch on the VIVO connector that has two settings "Safe" and "Work" what does this switch do? I can't find anything on it in the manual that came with the video card.
P.S. The remote works great.
Motherboard:KT4V-L
CPU: AthlonXP 2400+
RAM: 512Meg DDR400
Video: FX5200 TDR-128
OS: WinXPCheck out the new release 3 upgrade here
It has solved almost all the problems described here. Just came out today too.
Maybe you are looking for
-
Is there a way to determine the equivalent ANSI C code from a Labview project?
I'm a complete beginner to Labview. I have this fairly complex Labview project that was used to create a DLL which matlab could call to control my PCI-6534 card without having to know the NIDAQmx calls. I'm in the process of figuring out how to make
-
Help Needed with creting down payment request without tax from order
Hello, We are trigerring a down payment request from sales order. There is no tax to be collected on down payment. When the billing document is created SAP copied over tax elements from order and posts a relevant tax code on the down payment billing
-
Form: DELNOTE does not staple on HP4250N using win default printer
We have the problem, that over the exisiting SAP WIN printer, the new Adobe form does not staple the paper. The WIN printer on SAP was set up years ago and I think we have to replace the WIN printer driver on our SAP system with new driver files. Do
-
Won't burn, stops after encoding, then freezes, why?
Hi, I am unable to burn my iMovie project that I "shared" with iDVD. I have tried using a dvd -R and +R, and they both stop right after the "Process Movie" stage, the nothing happens, then it freezes and I have to force quit. So, it never even reache
-
How to create an array with controls and indicators?
I want to create a scrollable array of control/indicator pairs from a config file. Something that looks like the attached image. Of course, I can only create an array that's either either a control or indicator -- not both (the operator should not