Trouble with My University Email

I am having some trouble with my university email. It is an exchange server or an Outlook Web Access Server. Any ideas?

I am sorry. I was a little vague in my description. I will try to be more comprehensive this time around. I can get email in from the Outlook server. How ever I can't seem to send any out. Now I followed the same steps that Apple gives you for when you can receive but can't send out, and I still can't get it to work.
Here are my settings just in case:
IMAP Account
Server name is smtp.mailbox.sc.edu
Using SSL port 993
and password protected
I hope this helps.

Similar Messages

I am an iPad novice and whilst I have managed to set up my personal email, I have having trouble with my business email in that I can receive emails, but am unable to send and the message says 'this email address has been rejected by server'

I am an iPad novice and whilst I have managed to set up my hotmail account on the iPad - I ham having trouble with my business email (I can receive emails, but cannot send and it says' email rejected by server'

That sounds like a settings issue to me. Check with your IT depatment to make sure you have it configured properly.

IPhone 5S trouble with Go Daddy email

I have an iPhone 5S (iOS 7.1.2) but I'm having trouble with Go Daddy email (C-Panel). I've already contacted Go Daddy about the issue and spent a few hours without any luck. The Go Daddy agent was able to setup my email with no problem and said he couldn't see an issue on their side:
Issues:
1- cannot delete messages on the inbox (it states "unable to move message, this message could not be moved to mailbox trash".
2- cannot edit draft email started on Outlook. when I check iPhone, the draft is synced, but cannot edit it to send it from iPhone.
3- cannot see sent messages. If I send message from Outlook, it shows up on my sent items in iPhone. However, if I send or reply to message from iPhone, the message gets to the recipient, but I have no backup of the message because it does not show up on my Outlook or my iPhone.
Please help. Thank you.

Hey Anshul,
1) here is the screenshot of the website on a mobile device. the entire website is cropped on every page. the link to the website is goodmothergallery.com
2) also when i add hyperlinks to any text or image and then export the site to publish it says the hyperlinks did not work.
3) last question is when your navigating the website and scroll over for instance the 'saving bubba' article we would like to make that image clickable to navigate you directly to the article. is that possible at all and if so how would I go about doing so?
Thank you so much! Extremely helpful!
-Jared

I M having trouble with my BT emails coming through to my I pad, they came through fine at first now they are not coming through at all

I am having trouble getting my BT email account to work on my I pad and I phone. It was working fine but then stopped and I get a message saying I can't get mail because my password is incorrect. My password is fine can anyone help?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try a Reset - iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
Or this - Delete the account in Mail and then set it up again.
 Cheers, Tom

Trouble with SAPconnect / sending email in ABAP-code

Hi,
with the code below I try to send an email from ABAP outside
to an mail-account in the internet.
I'll get no error/exceptions but the mail will be not send
to the internet-mail-account.
In Transaktion SCOT I checked the SAPconnect-Node "INT"-"SMTP".
There is a mailserver with the right IP und the right Port. So I don't understand
what could be the problem!?
Can anybody help me and say me why the code below doesn't works?
Best wishes!
* For API
data: maildata type sodocchgi1.
data: mailtxt type table of solisti1 with header line.
data: mailrec type table of somlrec90 with header line.
start-of-selection.
clear:    maildata, mailtxt, mailrec.
refresh: mailtxt, mailrec.
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test'.
maildata-obj_langu = sy-langu.
mailtxt-line = 'This is a test'.
append mailtxt.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
    call function 'SO_NEW_DOCUMENT_SEND_API1'
         exporting
              document_data              = maildata
              document_type              = 'RAW'
              put_in_outbox              = 'X'
         tables
              object_header              = mailtxt
              object_content             = mailtxt
              receivers                  = mailrec
         exceptions
              too_many_receivers         = 1
              document_not_sent          = 2
              document_type_not_exist    = 3
              operation_no_authorization = 4
              parameter_error            = 5
              x_error                    = 6
              enqueue_error              = 7
              others                     = 8.
    if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
* Start the send process using the following statement
submit rsconn01 with mode = 'int' and return.
Message was edited by:
        sebastian eckes

SAP is a robust system, which gives many facilities in the form of Function Modules (FMs) for connecting to external systems or for use within the system. With a clever use of these FMs we can achieve a lot of things through ABAP code.
This article focuses on ways to send E-mails and SAP Mails using ABAP code.
Firstly SAP Mail
A SAP mail is a mail internal to the SAP system. It is a very good forum to exchange information with other users. Using a SAP mail in ABAP code facilitates exchange of automatic messages at various stages of the business process. It is easy to use and saves many hassles involved in using workflows for exchanging messages.
The ABAP code to send a sap mail is built around the FM SO_OBJECT_SEND which has the following pattern.
call function 'SO_OBJECT_SEND'
exporting
EXTERN_ADDRESS = ' '
FOLDER_ID = ' '
FORWARDER = ' '
OBJECT_FL_CHANGE = ' '
OBJECT_HD_CHANGE = ' '
OBJECT_ID = ' '
OBJECT_TYPE = ' '
OUTBOX_FLAG = ' '
OWNER = ' '
STORE_FLAG = ' '
DELETE_FLAG = ' '
SENDER = ' '
CHECK_ALREADY_SENT = ' '
importing
object_id_new =
sent_to_all =
tables
OBJCONT =
OBJHEAD =
OBJPARA =
OBJPARB =
receivers =
PACKING_LIST =
ATT_CONT =
ATT_HEAD =
NOTE_TEXT =
exceptions
active_user_not_exist = 1
communication_failure = 2
component_not_available = 3
folder_not_exist = 4
folder_no_authorization = 5
forwarder_not_exist = 6
note_not_exist = 7
object_not_exist = 8
object_not_sent = 9
object_no_authorization = 10
object_type_not_exist = 11
operation_no_authorization = 12
owner_not_exist = 13
parameter_error = 14
substitute_not_active = 15
substitute_not_defined = 16
system_failure = 17
too_much_receivers = 18
user_not_exist = 19
x_error = 20
others = 21.
In the next article we will understand the main parameters and table interfaces of the FM.
Import Parameters Name and Description     Field name     Field function
Object_hd_change (structure) Contains the process to be done when SAP mail is marked for execution.When the Execute Icon in the SAP mail is clicked the corresponding object is executed     vmtyp     D for dialog module F for function moduleR for reportT for transactionU for transaction with export
     Acnam     Name of the object which is to be executed, like name of transaction/report
     Skips     X to execute first screen in background
     Objsns     Indicates sensitivity of the object. P for private objectF for functional objectO for confidential objectC for company confidential objectSensitivity level is restricted to O for documents in shared folders
     Objla     Language of the document E for Englishsy-langu for system language
     Objnam     Name of the document
     Objdes     Short description (Title) of the document
     Objsrt     Name of the sort field. This is used to group documents based on certain criteria
Object_type Type of document to be sent with mail           RAW for raw text (default) DOC for word file XLS for excel fileAll classes can be used except for folders (FOL) and distribution lists (DLI)
Outbox_flag           X to indicate that mail should also be stored in outbox of the user after sending (default )
Owner           Sap login of the user responsible for transmission
Table Parameters Name and Description     Field Name     Field function
Objcont Table to hold the body of the mail     Line     Text lines up to 255 characters
Objhead Table to hold number of lines in the body of the mail, i.e size of the table in lines     Line     Text lines up to 255 characters
Objpara Table to hold the set/get parameters to be transferred to the processing element     Name     Name of the parameter. Only first three characters are used
     Option     Not used
     Low     Value of the parameter in name
     High     Not used
Objparb Table to hold information for mails to which a certain processing type is assigned. For a report or transaction with transfer of values to global memory, the table has to contain the parameters with relevant values. The memory id is taken from the first row. For a FM or dialog module, data in table will be transferred as table parameter msgdial     Name     For report or transaction with transfer of values to global memory, the field for first row should hold the name of the memory id used for export and the other rows should hold the parameter names. For FM or dialog module this field should hold the values as per the usage of the module
     Value     For report or transaction with transfer of values to global memory, the field for first row should remain empty and the other rows should hold values of the parameters. For FM or dialog module this field should hold the values as per the usage of the module
Receivers Table to hold recipient details     Recnam     SAP login of the recipient. Append all the recipients to this table
     Sndcp     X for sending mail as a copy
     Sndex     X for sending as express document. This will prompt a logged on recipient saying that he or she has received an express mail
     Recesc     B for SAP user E for external email addressU for unix address
Export Parameters Name and Description     Field name     Field function
Object_id_new Contains object id of document created during send process
Sent_to_all X indicates that document was sent to all recipients. Flag is not activated if sending fails in one or more cases
Main Exceptions Name and Description     Description
Too_much_receivers      Number of recipients is greater than number for which sender is authorised to send
Object_not_sent     Document was not delivered to any of the recipients
Object_not_exist     Document class specified does not exist or cannot be sent
Object_no_authorisation     Document could not be sent as one of the required authorisations does not exist
Parameter_error     Invalid combination of parameter values transferred to FM
X_error     Internal error occurred
Once all the parameters and table interfaces are properly filled, call the function module to send the SAP mail to the recipient inbox.
Care should be taken to report the status of execution of the function module to the user using one of the exceptions defined (refer function module pattern above)
Though SAP mail is a very robust method of interacting with users within SAP system, it is always good to receive email in Microsoft inbox. This also works like an additional notification to users in case they do not check SAP mail regularly. The next article covers sending E-mails using ABAP.
Sending Email to a non-SAP system:
Though SAP mail is a very robust method of interacting with users within SAP system, it is always good to receive email in Microsoft inbox. This also works like an additional notification to users in case they do not check SAP mail regularly.
Sending an email to the Microsoft Inbox is a way of interacting with a non SAP system through ABAP code and hence is very interesting. A fair knowledge of UNIX shell scripting is assumed here.
The ABAP code to send an email to Microsoft inbox revolves around following UNIX script
Echo "From:" "<"$1">" > <unix file path name>
Echo "To:" "<"$2">" >> <unix file path name>
Echo "Subject:" "<"$3">" >> <unix file path name>
Cat $4 >> <unix file path name>
Uuencode $5 $6 >> <unix file path name>
Cat <unix file path name> | /usr/sbin/sendmail f $fraddr $toaddr
(Note : the commands in the above script can be case sensitive. Check the actual case on the unix installation in question)
Let us understand the various parts of the above script.
$1 = Sender email address
$2 = Recipient email address
$3 = Subject of the email
$4 = Path of unix server file having email body
Form email body as an internal table in ABAP program, download it to a unix server file
$5 = Path of unix server file to be sent as email attachment
$6 = Name to be given to the attachment (like test1.doc, test1.xls). The corresponding Microsoft icon
will be shown in the email for the type of file attached ( Word document, excel document etc)
The script builds a temporary file and pipes the file to the sendmail command to achieve the mission.
This script can be invoked from SAP to send the mail to the intended recipient. Store this small script on the unix server. (Assume script name is sndmail )
To do this we should define a link in the SAP system between a customized command and this unix script.
The FM to define a customized command in SAP system has the following pattern.
call function 'SXPG_CALL_SYSTEM'
exporting
commandname =
PARAMETERS = ' '
importing
status =
tables
exec_protocol =
exceptions
no_permission = 1
command_not_found = 2
parameters_too_long = 3
security_risk = 4
wrong_check_call_interface = 5
program_start_error = 6
program_termination_error = 7
x_error = 8
parameter_expected = 9
too_many_parameters = 10
illegal_command = 11
others = 12.
In the next article we will understand the main parameters and table interfaces of the FM.
Import Parameters Name and Description     Field name     Field function
Commandname Name of unix shell script or command to be executed by SAP           Name of unix shell script to be invoked
Parameters           The parameters to be sent to unix shell script ($1, $2 etc). Send parameters as a concatenated string separated by space and length not exceeding 128 characters For eg in UNIX environment the above shell script would be executed as Sndmail [email protected] [email protected] Trial /home/test.doc testmail.We will be simulating this command using the FM from SAP system
Table Parameters Name and Description     Field Name     Field function
Exec_protocol (structure) Table to get messages from unix server after shell script is executed     Length     Length of the message from external program i.e unix
     Message     Log message from external program i.e unix
Export Parameters Name and Description     Field name     Field function
Status Contains the status of execution of external program            Scheduling status of external program i.e unix
Once the above FM is invoked with the necessary parameters the unix program sendmail will send a mail to the inbox of the recipient in Microsoft.
The restriction on the parameter string length of 128 characters can be removed to make way for very long email addresses and subjects. Build the parameters into an internal table and download it as a file on the unix server. Instead of passing each parameter individually, pass the unix server path of this file as the parameter to the unix shell script (sndmail mentioned above). Modify the shell script to read every line of this parameter file as variables to be used in the shell script.
In the next article we will see an example of the ABAP code you can use to send SAP Mails.
REPORT ZTSAPMAIL.
DATA: X_OBJECT_TYPE LIKE SOOD-OBJTP.
DATA: BEGIN OF X_OBJECT_HD_CHANGE.
INCLUDE STRUCTURE SOOD1.
DATA: END OF X_OBJECT_HD_CHANGE.
DATA: BEGIN OF X_OBJCONT OCCURS 10.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJCONT.
DATA: BEGIN OF X_OBJHEAD OCCURS 0.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJHEAD.
DATA: BEGIN OF RAW_HEAD.
INCLUDE STRUCTURE SORH.
DATA: END OF RAW_HEAD.
DATA: BEGIN OF X_RECEIVERS OCCURS 0.
INCLUDE STRUCTURE SOOS1.
DATA: END OF X_RECEIVERS.
PARAMETERS: RECEIVER LIKE X_RECEIVERS-RECNAM. " Name
*BUILD MESSAGE HEADER
MOVE 'Sort field goes here' TO X_OBJECT_HD_CHANGE-OBJSRT. " Sort field
MOVE 'Name of the object goes here' TO X_OBJECT_HD_CHANGE-OBJNAM. " Name
MOVE 'Document title goes here' TO X_OBJECT_HD_CHANGE-OBJDES. " Title
MOVE 'F' TO X_OBJECT_HD_CHANGE-OBJSNS. " Functional OBJECT
MOVE 'E' TO X_OBJECT_HD_CHANGE-OBJLA. " Language
Object type of the new document
MOVE 'RAW' TO X_OBJECT_TYPE.
CLEAR X_OBJCONT.
MOVE 'Contents of mail' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
CLEAR X_OBJCONT-LINE. APPEND X_OBJCONT.
MOVE 'More contents' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
MOVE 'Still more contents'
to x_objcont-line.
APPEND X_OBJCONT.
MOVE ' ' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
Specific header (Dependent on the object type, here RAW)
REFRESH X_OBJHEAD.
DESCRIBE TABLE X_OBJCONT LINES RAW_HEAD-RAWSIZ.
MOVE RAW_HEAD TO X_OBJHEAD.
APPEND X_OBJHEAD.
*RECEIVERS table
CLEAR X_RECEIVERS.
REFRESH X_RECEIVERS.
MOVE RECEIVER TO X_RECEIVERS-RECNAM. " Name
MOVE 'B' TO X_RECEIVERS-RECESC. " Receiver type
MOVE 'X' TO X_RECEIVERS-SNDCP. " Send as a copy
MOVE 'X' TO X_RECEIVERS-SNDEX. " EXPRESS DOCUMENT
APPEND X_RECEIVERS.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = 'OUTBOX'
forwarder = x_forwarder
object_fl_change = x_object_fl_change
OBJECT_HD_CHANGE = X_OBJECT_HD_CHANGE
object_id = x_object_id
OBJECT_TYPE = X_OBJECT_TYPE
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
store_flag = x_store_flag
importing
object_id_new = x_object_id_new
sent_to_all = x_sent_to_all "May need to use
TABLES
OBJCONT = X_OBJCONT
OBJHEAD = X_OBJHEAD
objpara = x_objpara
objparb = x_objparb
RECEIVERS = X_RECEIVERS.
REPORT ZTUNIXMAIL.
DATA : TO_ADDRESS LIKE SY_LISEL,
FROM_ADDRESS LIKE SY-LISEL,
SUBJECT LIKE SY-LISEL,
ATTACHMENT_NAME LIKE SY_LISEL,
DATA_FILE_PATH LIKE SXPGCOLIST-PARAMETERS,
BODY_FILE_PATH LIKE SXPGCOLIST-PARAMETERS.
DATA : BEGIN OF INT_EMAIL_ATTACH OCCURS 0,
TXTLINE CHAR(255),
END OF INT_EMAIL_ATTACH.
DATA : BEGIN OF INT_EMAIL_BODY OCCURS 0,
TXTLINE CHAR(255),
END OF INT_EMAIL_BODY.
CLEAR : INT_EXEC_PROTOCOL,INT_EMAIL_ATTACH,INT_EMAIL_BODY.
REFRESH : INT_EXEC_PROTOCOL,INT_EMAIL_ATTACH,INT_EMAIL_BODY.
INT_EMAIL_ATTACH-TXTLINE = 'Put all attachment text in this table'.
APPEND INT_EMAIL_ATTACH. CLEAR INT_EMAIL_ATTACH.
INT_EMAIL_BODY-TXTLINE = 'Put all attachment text in this table'.
APPEND INT_EMAIL_BODY. CLEAR INT_EMAIL_BODY.
CONCATENATE TO_ADDRESS
FROM_ADDRESS
SUBJECT
BODY_FILE_PATH
DATA_FILE_PATH
ATTACHMENT_NAME
INTO V_PARAMETERS.
IF NOT INT_EMAIL_ATTACH[] IS INITIAL.
OPEN DATASET DATA_FILE_PATH FOR OUTPUT IN TEXT MODE.
LOOP AT INT_EMAIL_ATTACH.
TRANSFER INT_EMAIL_ATTACH-TXTLINE TO DATA_FILE_PATH.
ENDLOOP.
CLOSE DATASET DATA_FILE_PATH.
ENDIF.
IF NOT INT_EMAIL_BODY[] IS INITIAL.
OPEN DATASET BODY_FILE_PATH FOR OUTPUT IN TEXT MODE.
LOOP AT INT_EMAIL_BODY.
TRANSFER INT_EMAIL_BODY-TXTLINE TO BODY_FILE_PATH.
ENDLOOP.
CLOSE DATASET BODY_FILE_PATH.
ENDIF.
CALL FUNCTION 'SXPG_CALL_SYSTEM'
EXPORTING
COMMANDNAME = 'Z_EMAIL' - Command calling unix script
PARAMETERS = V_PARAMETERS
importing
status = ''
TABLES
EXEC_PROTOCOL = INT_EXEC_PROTOCOL
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
regards,
srinivas
<b>*Reward points for useful answers*</b>

I am having trouble with my hotmail emails and want to get rid of them and start to use icloud emails instead. Is this possible?

I am having problems with my hotmail and live emails and want to cancel them and use icloud email instead, is this possible and how do I do it by creating icloud emails, and using icloud emails

See the link below for how to sign up for and set up an iCloud account, including an @icloud.com email address:
http://www.apple.com/icloud/setup/
You'll need to update your Mac OS to 10.7.5 or later.

I installed Yosemite OSX and now am having trouble with my godaddy email

I just installed Yosemite on my MAC Book Pro. I have had trouble getting past the opening page on my Go Daddy email account. I didn't have this problem before. Anything different. The links work fine on CHrome and Safari,

Add you mail again in the Mail App ussing this settings;
Tap Other, Tap Add mail account,
Username: [email protected] (Make sure you enter @charter.net after your username or you will be unable to login)
Password: The password you use to login to your email account
SSL: This setting should be on for both SMTP and IMAP
Protocol: IMAP
Incoming Email Server: mobile.charter.net
Port: 993
Outgoing Email Server: mobile.charter.net
Port: 587
Don't forget to delete the other account!
If you are accessing your Charter.net Email address from MULTIPLE desktop computers and/or have mobile devices configured to access the same Email address use these settings on your computers:
Username: [email protected] (Make sure you enter @charter.net after your username or you will be unable to login)
Password: The password you use to login to your email account
Server Type: IMAP
Incoming Mail server: IMAP.charter.net
Port: 143
Outgoing Mail Server: SMTP.charter.net
Port: 25
Web Mail Address: http://www.charter.net

I am having trouble with my online email account when I use firefox,because of the time out.

I go to my email account on the server's webpage. Do not use weblive or outlook. When I am typing a long email, it will not save or send because it expires according to a message that comes up from firefox. It is lost.

First, as a workaround, you might be able to use this extension: https://addons.mozilla.org/firefox/addon/lazarus-form-recovery/
But we should try to figure out why you are getting logged out. Here are two possibilities:
(1) Connection - Yahoo and AOL may keep demanding a password if your connection setting is "Auto-detect". You can change it to "No Proxy" here:
"3-bar" menu button (or Tools menu) > Options > Advanced > Network mini-tab > "Settings" button
(2) Incomplete cookies - websites maintain access to your session using cookies, so if you are rejecting third party cookies or use an add-on to clean up cookies as you browse, that could cause a problem staying logged in. Sometimes cookies also become corrupted, so the first step would be to flush what you have for the site. (See below)
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

TS3276 trouble with 1 users email account

hi all
my OH hasnt been able to get his email fro 5 days !!!
His settings are exactly the same as mine which is working fine but now his sent, inbox and trash are completely EMPTY !!!!!!
First our ISP said it was our end, then that there were large emails that needed deleting before they'd download and now it's to do with our email client????
We've checked on the 'email doctor' and the largest email was a poxy 42kb!!! Now deleted but still NOTHING !!!! Very annoying as some very important documents and archived stuff obviously!!!!!
ANYONE ABLE TO HELP ???

First, as a workaround, you might be able to use this extension: https://addons.mozilla.org/firefox/addon/lazarus-form-recovery/
But we should try to figure out why you are getting logged out. Here are two possibilities:
(1) Connection - Yahoo and AOL may keep demanding a password if your connection setting is "Auto-detect". You can change it to "No Proxy" here:
"3-bar" menu button (or Tools menu) > Options > Advanced > Network mini-tab > "Settings" button
(2) Incomplete cookies - websites maintain access to your session using cookies, so if you are rejecting third party cookies or use an add-on to clean up cookies as you browse, that could cause a problem staying logged in. Sometimes cookies also become corrupted, so the first step would be to flush what you have for the site. (See below)
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

TS3276 i am having trouble with my exchange emails. I use the latest exchange 2010 and am having trouble downloading all my emails on the macbook

I use a microdost exchange 2010 in my office. I just bought a macbook pro and try to syn my office mail. While it has been set up properlly and it has started downloading some of my older emails, it is taking very long and does not download all the mails especially the new ones. The ones it has downloaded take a long time to load and open.
I bought the laptop to use it on the go. What is the solution? Please help.
Thanks.

Startup your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
If the startup disk is not available from that window, you may be able to repair the disk.
Help here > A flashing question mark appears when you start your Mac

Anyone having trouble with their MobileMe email after switching to iCloud?

After making the switch to iCloud, I can't access my MobileMe email at all. When I enter my information on my phone to set up the account it verifies it, then when I go to the mail app it says the password is incorrect. When I got to my Mail map on my mac it says the server rejects my password. When I go to the mobile me and iCloud websites they tell me there is an error.

Same here - I had to turn my iphone4 Off several times and finally left if off for a few minutes - that seemed to do the trick. Once I restarted it prompted me to transfer my MobileMe account to iCloud and when I clicked OK it worked like a charm.

Having trouble with my iCloud email in Mail program on iMac

I converted to iCloud a few months ago and everything has been working well. Today, my Mail program can neither download nor send emails for my iCloud account on my iMac (about 4 years old). It just seems to churn. I CAN however, access my iCoud email on my iPhone. Any ideas what might be wrong? Thanks. George T.

Thanks WC. I DID delete/re-enter my iCloud email account, and it all came back and is working fine . . . at least for the moment. The planets are back in alignment. Thanks. George T.
PS - my wife and I have become devotees of BBC masterpiece theater, notably Downton Abbey and Lark Rise to Candleford. You Brits make good TV. Take care.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud.

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud. Every time I go to the account settings of my existing account (which currently uses my university email, as I set it up years ago and had no idea it'd eventually cause problems), I enter a different email to use for that account but I continuously receive an error message saying "account changes cannot be saved." It makes me think that it's because the email isn't verified (funny, it actually is verified since it has been the alternate email on the old account for years), but when I click the "send verification email" nothing happens (that is, no email is sent to that other email address).
Anyway, my university is now requiring that faculty create new accounts using our university email addresses in order to register/use Creative Cloud. Am I able to delete my old account, or can anyone help me actually change the email address associated with my old account without getting a "changes can't be saved" error?

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

How do I add a desktop link to gmail? I have one email account as my safari home page because it has trouble with apple mail, but I want a one-click link to two other email accounts.

How do I add a desktop link to additional email accounts? I have one email account as my safari home page because it has trouble with apple mail, but I want a one-click link on my desktop that takes me to two other email accounts.

Can you set up a rule in your old account to forward mail to your new account and then delete it from the old account?
(1012)

Trouble with My University Email

Similar Messages

Maybe you are looking for