Trouble with new Sony Z5U exporting to tape

I am using Premiere Pro CS3. Just purchased the New Sony Camcorder Model Z5U. Tried to export to tape and Premiere doesn't want to cooperate. Anyone having the same problem and if so, any fixes that you might have run across???

I exported the same project to a JVC model HR-DVS2 tape deck and it recorded it. I also have to confess that I am new to CS3. Not to Premiere. I have avoided using CS3 because I have not taken the time to learn it. I work with TV production and the timing has forced me to use old reliable 6.5. I guess I am getting too old to learn. I am having fits with CS3 because I didn't take the time to work with any of the Pro series. Have them all but didn't use them. First version crashed on me in a hurryup project so I gave up on it. I used to be able to figure these issues out on my own...now I'm lost.

Similar Messages

I am having trouble with new I-Phone 4 battery running down in 5 hrs.? Help.

I am having trouble with new I-Phone 4 battery running down in 5 hrs.? Help.

Do you have alot of apps running in background? Tap home key 2 times and there's a list across screen with icons you can deselect them by hold on one and they wiggle touch the minus button and it will deactivate them untill you use them again. Do you have the phone dim after so many seconds or minutes? Is the screen bright all time? Do you go on the Internet or watch video on phone?
These things can affect the hrs of use.

VHS to DV tapes...problem with new Sony camcorders

I had a nice Sony miniDV camcorder, the DCR HC 30. Worked great to record almost all of my VHS tapes to DV, which I am using to created my iMovies. The camcorder worked fine in this mode. It then had a problem with regular recording, capturing the audio, but not video. Known problem to Sony, who repaired the camcorder at no cost. It worked great again, but the last time I went to record from my VHS tape, it worked for an hour, and then the touch-screen menu failed to respond to touch. (Another story).
I also have a newer Sony camcorder, the DCR HC 26. Connected it to the VCR to record from the VHS tape. I then discovered that this camcorder will allow recording FROM the camcorder TO the VCR with the AV connector, but if I want to record FROM the VCR, it will only work using the DV connector into an iLink port (Firewire).
I went to the 'Sony Style' store (yes,Palo Alto has everything!) and the guy first insisted it could be done with the new HC 38 and 48, but after he actually read the manuals, it was the same as the HC26: must have a Firewire port on the VCR. How dumb is that? How many of us have all these old VHS tapes, probably old VCRs too, and none of the old ones will have FireWire ports!
I have always recommended copying VHS footage to DV tapes, and now I am not going to be able to do that unless I get a converter. Seems a bit expensive for just the few VHS tapes that I forgot to convert previously.
I tried to see if the HC 30 can be repaired again....Sony wants $211 just to check it out. I can buy a new camcorder for $320 so it doesn't seem worth it unless I can connect the touch-screen failure with the problem with video recording that was supposedly corrected.
May have to get a converter.....last resort is another old camcorder Sony TRV something. It is on its last legs, but maybe it could work for a few hours more!
Wanted to let it be known that direct recording from an old VCR to new Sony miniDV cannot be done.

Hi tilman - yes - bottom line is not to discard an old vidcam with analogue-in when buying its 'higher-speced(?!) replacement - although that doesn't help Beverly with her problem.
There must be large numbers of second-hand cams with that function being sold as people rush to buy DVD vidcams etc, so it will be worth looking out for a good cheap one.
It seems that soon the only mini-DV cams will be higher-end models, some of which, being larger, have much reduced portability. Ah! Progress!

3D Glasses TDGBR250 will not sync with new Sony Bravia KD-65X8509C!

Just bought a new Sony Bravia KD-65X8509C only to find my 4 pairs of 3D Glasses TDGBR250 will not sync! Can anyone help? I thought they were compatible as they worked fine with my old Sony Bravia KDL 55HX853.

Found out they are not compatible and had to shell out for new 500A 3D Glasses, Ouch!!

Trouble with format of files exported from pages as .doc - when opened on a pc they have extra spaces and pages breaks inserted after each line? Can be manually deleted, but defeats sharing purpose. advice?

Hi all, I have trouble with the format of files exported by email as .doc from pages - when opened in MS word on a PC or other device, they have extra spaces and pages inserted after each line - can be deleted manually, but defeats sharing purpose. Any advice? Not the most sophisticated user.

Got it. I tried booting with MOD_AUTOLOAD set to yes, and it was working fine. Looks like I needed to specify some more modules in my list.

Permissions trouble with new MacBook Pro

I had previously upgraded my MacBook Pro (original unibody model) to Mountain Lion with no apparent issues. I have two Users, both with Admin status and everything appeared to function as before.
I just traded in my old MacBook Pro for a new current model Retina MacBook Pro, using Migration Assistant upon first startup to move everything over from the older machine. Most everything has been seamless - except for Permissions.
I started seeing messages appear indicating I didn't have permission to open files, run apps, delete files, etc. Looking at Get Info, I found Sharing & Permissions was only set up for (if I recall correctly) Admin, Administrator and something called Wheel. I solved the permissions issue while logged in as the primary User by adding both Users to the Sharing & Permissions section of the Info screen for the entire hard drive, giving them Read & Write access, and selecting Apply to enclosed items... That seems to have solved the issue for the primary User.
But then I tried working logged in as the secondary User. I started getting messages indicating I could not save a file I had just modified because I did not have permission, and that I should contact the Administrator. Well, that's me. So I tried the same thing that I did logged in as the primary User, but there was no change. I still can't save a modified file logged in as the secondary Admin User.
I haven't found anything that addresses this - except to learn where the Wheel User originated. Can someone point me in the right direction to where I can learn how to gain full, unlimited access to my own computer - under bothe User accounts?
Thank you.

You corrupted the permissions of every file on the volume. Restore everything from the backup you made before doing that. Then do as follows.
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

HT5262 Hi Good morning, trouble with new phone 5s 32gb when i have just tied to connect to itunes nothing happens

Hi I have just plug into my computer with new iphone 5s 32gb and it will not connet to itunes

Our fix was:
Control panel, uninstall every apple program including bonjour and quicktime and mobile device drivers. restart computer, download itunes...worked fine on our 2 computers.

HT5085 having trouble with new phone activation

Im having trouble with actavation for my sprintpcs device iphone5s

Hi there Lilly015,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
-Griff W.

Registration Troubles with new mini

I just got a new macmini 1.83 with 1g ram bundled from a Apple retail store.
When I tried to register online the serial number was not accepted. I had to imput the product number as a temp number. Anyone else having the same Problems with new minis?
Rob
Powerbook G4 15" 1.5 Superdrive 512 Ram Mac OS X (10.4)

If it's a very recently built computer, it may take a week or two for the serial numbers in Apple's online database to catch-up. If you call AppleCare Support in the U.S., there's an option for AppleCare issues that are not technical support about your computer. Those folks can register it for you by going directly to their database.
-Doug

Downloading songs troubles with new nano

Hello. I recently revieved a new pink ipod nano for the holidays. I am having some trouble downloading songs onto it.
I curently have one ipod mini and one itunes account.
I have followed the little instruction thing that came with the new ipod nano but i have no luck.
[when it told me to turn off the computer it did and it turned back on and nothing really happened after that]
I would just like the songs to transfer to the new ipod nano. everytime i plug it into my computer it just is charging the battery and is not downloading any of the songs from the existing itunes account. do i need to make a brand new itunes account?
i would really not like to make a new itunes account on my other computer due to the ammount of space taken up by it.
i think i am doing it right but having the already existing itunes account has made it difficult? i really don't know and am confused..
if anybody could help me with this i would really appreciate it!!! i would like to have this problem resolved within the next day or two seeing i am going on a trip.
not sure none

A few questions for you.
Is this music purchased from the iTunes store you're having difficulty with, or all music?
How do you normally transfer music? Any error messages?

Bootcamp trouble with new hardrive

After i got a new harddrive, due to the defective harddrives in the 2009-11 iMacs and Apple had to exchange them free of charge, I've been having trouble installing bootcamp in my Windows 7. Everything went smoothly with the partitioning and the installing of W7 and naturally I've had previous experience in doing so, so no trouble there. The problem arises when I try to use the OSX install dvd to install bootcamp. The disc kept spinning for a while and then just ejected it again. So i tried installing manually by downloading bootcamp from the support site. After finding the appropiate version (4.0 < ) I tried using the setup.exe as prescribed in the bootcamp installation manual, but to no avail. Apparantly the version is not the right one. So I deciced to try an older version (3.3) but got the message "The Boot Camp version currently installed on your system does not require this update." which was weird since i hadn't installed any Boot Camp!
So far I have tried 3.3, 4.0.4255, 4.1.4586 and 5.0.5033 but neither of them seems to work. Have installed some of the non-Apple drivers, but i still can't communicate with neither my apple keyboard, my magic mouse or my OSX partition to name a few.
Truly hope anybody has experienced the same issues AND gotten around them.

Welcome to Apple Support Communities
If you have a Late 2009 or older iMac, you need these Boot Camp drivers > http://support.apple.com/kb/DL1630 You can be sure that these drivers will work with your iMac, because Boot Camp 5 drivers are only compatible with Mid 2010 27-inch iMacs and newer

Trouble with my Sony TRV-38 and iChat

I have a Sony TRV-38 Mini DV and it won't set up correctly with my "Video" in iChat... it wont even recognize it. I have a 17" powerbook (1.5ghz) and im connecting it directly with a USB cable. Both camerah & Memory mode will not work. Whats the problem? It talks to my mac when i put a memory stick in it while in memory mode... but thats it. NO VIDEO!!!!
Also... is it true that it will damage my camcorder? and if so WHY!!!!!!! it seems stupid to me.

Hi Richard,
Welcome to the Apple Discussion Pages.
I see the TRV-38 is not on this list http://www.apple.com/macosx/upgrade/camcorders.html
Does this mean it does not have Firewire ?
iChat require a DV input but some USB cameras can work with this utility http://www.ecamm.com/mac/ichatusbcam/
Also if the Camera is On and has a tape in it the tape can become stretched. Many cams have anti-stretch feature that kick in after a few seconds when in camera mode.
You should have a set up that will allow a pic to be sent a TV or VCR so that you can record there instead of recording on the Cam itself. (i.e Camera mode but not Record and Not Playback).
On many devices the tape can be taken out and the door shut.
Ralph

Mail and Address crashed while I was having trouble with new iWeb 1.1

While I was having trouble publishing my website with brand new iWeb 1.1 version that was just upgraded with all the upgrades 5/15/06 and after crashing that program as many people did (see iWeb discussion group), that is crashing about 15 times, my Mail program changed, losing all my old mail and account. And holy moly, all my Address program data is gone!!! What could have happened!!! can I get anything back! Never crashed Address like this before - this is a disaster! any help?

Here is a link which describes the process for changing an Adobe ID:
Adobe ID, sign-in, and account help

Troubles with new DSL modem (moto 3260)

Folks,
My old 2wire died and I picked up a Motorola 3260 from ATT....been reading a lot of articles on these boards but I'm stymied trying to get this to work with my Airport Extreme (and MBP on Mountain Lion)
I actually seemingly had the Modem-Airport-Computer connection working for a few minutes, but the connection quickly fell apart and I'm busy trying to methodically put it all backk together.
1) Reset modem and pulled power. Put modem back in non-bridged mode. Got new DSL password from ATT. Attached directly to computer through ethernet cable. Works!
2) Put modem into bridged mode. Cycled power on modem and computer. Set computer to "DHCP with manual address" so I could directly access the modem's settings pages. Verifed that modem showed up in bridged mode.
3) Set computer to DHCP (without manual adress)....renewed lease.....shut computer down and powered back up. Created PPPoE service on computer to see if I could get that working first before doing the same thing with the Airport....but this failed to connect! NOTE: I had gotten this working yesterday a few times, but not today.
So, this is the main issue....I can't seem to get PPPoE working via my computer to DSL modem directly, or when I use the AIrport to DSL modem.
If anyone has any pointers or advice, I would REALLY appreciate it!!!
Thanks!
Tom

Sorry for the difficulties.
I have used the Motorola 2210 for a number of years with rock solid performance. The modem is not exactly in Bridge Mode....it is set to PPPoE is on the computer or router. I do not know if the 3360 has that option.
It appears as if the 3360 has replaced the 2210....I have not tried a 3360 yet.
I use an Airport Extreme which is configured to provide the PPPoE connection service. No special setup, or hidden settings, etc. Been running fine for 4+ years.
Not sure why you are having so much trouble, when it appears that you are doing everything right.
You may have already thought of this, but it is possible to run PPPoE on the modem, and have the AirPort Extreme connect using "Ethernet". That will create a Double NAT error, but this is usually not serious, and AirPort Utility provides you with an option to "ignore" the error, so you get a green light, and not flashing amber.
I have run the network this way from time to time if for no other reason than experiment. The Double NAT does not seem to affect anything noticeably....unless you are using online gaming or other things that will not tolerate a Double NAT.
One of the advantages of using Double NAT is that you can bring up the modem settings simply by typing in the 192.168.1.254. Of course, if the network is running OK, there is not much reason to do this.
I'm not recommending that you use the Double NAT setup, but it might be worth a try to see how you like it...or if it works. Post back if need a few tips on this.

Wifi trouble with new iMac

I recently got a new iMac (27") and I am having an ongoing problem with wifi connection. It should be noted that other Apple devices -- iPad, iPhone, MacPro laptop, and Apple TV -- do not seem to have any trouble. Nor did my old Mac Pro. But the iMac connection keeps dropping. I have researched this issue in the Apple Support Forum and followed much of the advice, e.g. establishing a new connection identity, adjusting the DNS. While these solutions seemed to work for a while it wasn't long before the problem returned. I have rebooted both the computer and the modem numerous times (it is a DSL connection, BTW). Those actions also seem to help for a while but sometimes they don't help at all.
Since I transferred data from my old Mac Pro I have wondered if I have a preference or permissions issue. I know how to delete preferences when software acts up and that has sometimes been very helpful. But I don't know how to accomplish a similiar fix with the wifi.
Software is up-to-date and I have not encountered any other problems with the iMac.
Thanks.
Alice

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Trouble with new Sony Z5U exporting to tape

Similar Messages

Maybe you are looking for