Trouble with number
I am trying to install adobe photoshop elements 11 and I put the serial number in and the say its not the right number
Contact serial number support by phone or web chat.
Mylenium
Similar Messages
-
I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!
iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.
-
HELP. 3 years ago I purchased cs3. I had troubles with registering the serial number and used my university's suite instead, and (stupidly) did not sort it out. I am now wanting to subscribe to the online creative cloud with my cs3 discount. Is there any way to find / prove that I had purchased cs3 and locate a serial number? On my Adobe account it does not show my purchase of cs3 (I am guessing because of the trouble with registering my serial number). I have moved house 3 times since the purchase and am unable to locate the packaging or disk. Is there any way to prove my purchase without any serial number or showing under my Adobe account? Please help! Thanks
The CS3 discount offer is only for retail online product, it does not include education or volume license purchases. Refer to Terms and Conditions | Adobe
To check whether you had retail CS3 purchase, we need proof of purchase as well as serial number, without which the issue can not be resolved.
Regards
Rajshree -
HAVING TROUBLE WITH MY TOSHIBA TV 55INCH MODEL NUMBER 55SL417U ..
HAVING TROUBLE WITH MY TOSHIBA TV 55INCH MODEL NUMBER 55SL417U ...I SET IT UP RIGHT I THINK BUT CANT GET THE HI -DEF CHANNELS ....LIKE (3-45)...THE THREE DIGIT CHANNELS...ALSO DOES THE GUIDE BOTTON EVER WORK WHY PUT IT ON THE TV IF NOT...ALL I GET WHEN I TRY IT IS !NOT AVAILABLE.....ALSO I CANT EVEN FIND THIS MODEL ON THIS SITE BUT I KNOW THIS IS THE RITE MODEL NUMBER...ITS BRAND NEW....
That model is on the support site.
LED TV 55SL417U
You can't get the HD versions of the standard 3-45 channels, or you can't get those channels at all?
- Peter -
Since downloading the new operating system on my iPhone 4S, I'm having trouble with my phone messaging. I enter a number or input a number from my contacts and send my message. I then receive a error message stating the message can't be sent and it shows a set of "1s" were added in front of the number I entered. Ex: 1 (1) xxx-xxx-xxxx. Does anyone know why this is happening and how I can fix it?
I realize this. When calling prepaid cus service it only gives you the option to input your #. If you dont the system hangs up on you. When I input my number the system doesnt recognize it and hangs up on me.
-
I AM TRYING TO DOWNLOAD A FRESH COPY OF CS6 BUT HAVING TROUBLE WITH MY SERIAL NUMBER
I AM TRYING TO DOWNLOAD A FRESH COPY OF CS6 BUT HAVING TROUBLE WITH MY SERIAL NUMBER?
Hi Rob,
Please share few more details about the issue you facing.
Which Operating system you have?
Which product are you using?
What exact error message/code you get?
Thanks,
Ratandeep Arora -
I am having a lot of trouble with trying to use my debit card on purchase of itune apps or music. Whenever i put my card information in it tells me that this card is invalid. But there is no way that my card is invalid because i just got it last week. So the only thing i haven't done yet is call my bank to check and see if all my bank statements match but if they do then have no idea what to do to get this to work with my computer, ipad mini, or ipod HELP! PLEASE!
I am having this same problem and I have even contacted my bank. The address they have is EXACTLY the way I am typing it. It does match. I do not understand.
-
I am having trouble with billing. Itunes store says the security code is invalid but it is correct. Please advise
You'll need to contact your bank about this my friend.
-
As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK Computer Inc. K50IJ
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038B8600B98D1E0
Current user is not an administrator.
The current local date and time is 2014-03-21 16:52:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
Trouble with Toshiba built-in webcam: "unable to enumerate USB device"
I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature -
Trouble with OR in where clause
Hello,
I'm having trouble with execution speed. The problem seems to be with using OR in my where clause.
Here's the meat of the function where i_pledge_number is an input parm:
BEGIN
SELECT /*+ INDEX (pp) */ SUM(pp.prim_pledge_amount)
INTO return_amount
FROM
primary_pledge pp
WHERE
-- Get total if multiple allocations
pp.prim_pledge_number IN
(SELECT pc.pledge_number
FROM pledge_codes pc
WHERE pc.pledge_code_type = 'M'
AND pc.pledge_code = 'AC'
AND lpad(pc.pledge_comment,10,'0') = i_pledge_number)
-- Get total if single allocation
OR pp.prim_pledge_number = i_pledge_number;
RETURN return_amount;
END;
If I comment out either half of the OR statement (either the subquery or the pp.prim_pledge_number = i_pledge_number half) the function returns a value in .02 seconds. If I leave the OR in, it takes 2.764 seconds to execute?? Can someone please show me a better way (faster) to do this? I tried using nvl() around the subquery but couldn't get it to compile.
ThanksThese things are difficult to diagnose remotely, but here is something you can try....
SELECT */ SUM(pp.prim_pledge_amount)
INTO return_amount
FROM primary_pledge pp
WHERE pp.prim_pledge_number IN (SELECT pc.pledge_number
FROM pledge_codes pc
WHERE pc.pledge_code_type = 'M'
AND pc.pledge_code = 'AC'
AND lpad(pc.pledge_comment,10,'0') = i_pledge_number
UNION ALL
SELECT i_pledge_number FROM dual)
RETURN return_amount;
END;If that doesn't do anything (and it might well not) there are a large number of different ways we can recast this query. To save us further guessing please give us more details: execution plans, database version number, volumetrics.
Cheers, APC -
IMessage trouble with two iPhones and one Apple ID
Hi,
I'm having trouble with iMessage after updating both of my iPhones to iOS 6 and not being able to use iMessage with one of the phones.
Some background:
-I have two iPhones, one on AT&T in the U.S., and one on NTT DoCoMo in Japan, both with separate phone numbers, using the same Apple ID.
-The AT&T iPhone is a 4, the NTT is an unlocked 4S.
On my 4 (AT&T), on iMessage, I have the option to send/receive as my U.S. phone number and my Apple ID. Works just like before updating.
On my 4S (NTT), on iMessage, before I updated, I was able to send/receive using my Japanese number and Apple ID. After updating, I have the option to send/receive using my U.S. number and Apple ID. My Japanese number is greyed out and I cannot select it. When I turn on iMessage, it says "Waiting for activation..." and does not do anything. Turning iMessage off and on, some times I get an error message staying that activation cannot be completed.
I have rebooted the phone multiple times, turned on/off iMessage and FaceTime, turned the Set Date & Time Automatically option on/off, and reset Network settings several times. Nothing works; iMessage will not activate on my NTT 4S. Please help!Finally resolved this issue after months of off and on troubleshooting.
I have no idea exactly which steps "fixed" the issue, but here's what I did. None of the basic troubleshooting steps that are on here worked for me, and this is including restoring both phones in iTunes as a "last resort" step that two Apple technical service representatives suggested.
I found a post on here from user "tungddao" who suggested:
"Turn on iMessage then make a phone call to : 011+445773142076
With Facetime & Siri: 011+447786205094"
I called both numbers with my NTT 4S, and both numbers hung up right away. I also texted both numbers, and the FaceTime one went through, while the iMessage number did not. I then checked my SMS blocking settings with NTT. There were no blocks, but I reset the settings to "unblock all" anyway.
I was able to activate iMessage and FaceTime with my Apple ID and my NTT phone number. Halfway there.
I then turned on my ATT 4, and while I could send/receive using my Apple ID and NTT phone number, the ATT number was greyed out, which was the opposite of what had happened before, when I could use the ATT number, but not the NTT one. On my NTT 4S, I could select my ATT number, but it was stuck on "verifying" for days, and I knew it wouldn't go through.
So, I signed out of my Apple ID on iMessage and FaceTime on my ATT 4, and turned both services off. I turned on data roaming, and turned off WiFi. *This step was key to activating both services, as they would not activate over WiFi for some reason.
I turned on iMessage and FaceTime without signing in to my Apple ID just yet. They both activated successfully, and then I signed into my Apple ID on both services, and from then on, I can use both numbers and my Apple ID on both phones! Finally!
These are my current options:
Phone 1 (4S on NTT): Phone 1's #, Phone 2's #, Apple ID
Phone 2 (4 on ATT, roaming here in Japan on Softbank): Phone 2's #, Phone 1's #, Apple ID
Hope this helps someone out there, as this issue was real frustrating for me. -
My wife and I share apple id but have our own phones, and now having trouble with imessage
My wife and I share apple id but have our own phones, and now having trouble with imessage. Sharing calenders, apps, music, contacts, etc...all great. But when we imessage each other. Our phones get confused and either not deliver message, or send it to and from itself.
Go to Settings > Facetime and you will see "You can be reached for video calls at:"
This should list your phone number (iPhone) and your email address (probably the gmail one).
And then an option for "Add another email..."
Choose that and enter your @me.com account and it'll send a verification email.
Same for iMessage: Settings > Messages > "Receive at" > Add Another Email
So you can be called by facetime and use iMessage through multiple email accounts yes. -
Help
I need any help i can get, im having trouble with the app find my iphone. I have lost my iphone, checked on the computer, and somehow, took it away so how do i get it back??If you are saying that after signing into iCloud it is telling you device is not found, it could be for any number of reasons. If the battery is dead, if the SIM has been removed, or if someone else has the phone and they have restored it, it will not be shown. Also, if you located it once and then sent a remote wipe, it disables the abililty to locate the phone with Find My iPhone.
-
I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. I went to the forums and tried all the suggested fixes but none worked. Can I go back to the older version? I had no trouble with that and I do not like this new version at all. I tried a system restore twice and it did not fix the problem.
I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet.
Maybe you are looking for
-
Why is my Bluetooth no longer pairing with my iPhone 5?
Why is my bt not pairing with my iPhone 5? I've tried everything,but nothing works.
-
I am having trouble printing to a pdf in windows 8. I am doing this from Yahoo Mail and for some reason the PDF printer is giving me fits. Please advise.
-
Gaming problems in Vista - Satellite P300
Hey. I just bought a Toshiba Satellite P300-1CE that came with Vista Home Premium. The problem is that I cannot run any game on it. I've tryed NFS Most Wanted, Battlefield 2 and Titan Quest(theoretically I should have no problems with my configuratio
-
Numbers for ipad: turn text on vertical axis
Can I turn print on the vertical axis?I want to type something in spreadsheet and turn it 90 degrees instead of squashing print together so the letters are above each other the right way up. eg: if I type " Apple ", can I rotate the complete word 90
-
Reg: displaying in tamil fonts in PDF
Hi all, I have problem in displaying the characters in TAMIL(Local Language) in PDF in java. Here is the scenario. I enter the data in the screen using TAMIL Keyboard... The value gets stored in the database as special characters(ൿ). My requirem